Thermador | PRG364NLH | Spec sheet | Thermador PRG364NLH Spec Sheet

Thermador PRG364NLH Spec Sheet
PRG364NLH
36-INCH GAS PRO HARMONY® RANGE
WITH GRILL
PROFESSIONAL SERIES, STANDARD-DEPTH, PORCELAIN COOKTOP SURFACE
GENERAL PROPERTIES
Oven Capacity
5.0 cu. ft.
Cooking Modes - Main / Large Cavity
Bake, Convection Bake, Broil, Extended Bake
Cooking Modes - Small Cavity
N/A
Programs
Sabbath Function
Cleaning Type
N/A
Type of Grate
Continuous Cast Iron
Controls
Metal Knobs
Sealed Burners
Yes
OVEN PERFORMANCE
Bake Power
27,000 BTU (NG)
Broil Power
20,000 BTU (NG)
Convection Power
N/A
Also Available:
BURNER PERFORMANCE
PRL364NLH - LP
Total Number of Cooktop Burners
4 + Grill
Power of Front Left Burner BTU
18,000 and XLO (NG)
Power of Back Left Burner BTU
18,000 and XLO (NG)
Power of Back Center Burner BTU
N/A
Power of Front Center Burner BTU
N/A
Power of Center 12" Electric Griddle (W)
N/A
Power of Center 12" Electric Grill (W)
1,630 W
- Professional style, continuous cast iron grates
Power of Far Right 12" Electric Griddle (W)
N/A
- Truly Flush Mounted™, 24" standard cabinet depth
Power of Back Right Burner BTU
18,000 (NG)
Power of Front Right Burner BTU
18,000 (NG)
FEATURES & BENEFITS
-E
xclusive, patented Star® Burner–most even heating,
unsurpassed flame coverage
- QuickClean Base® designed for easy surface cleaning
-P
recision simmering capabilities as low as 100°F (375 BTU)
with 2 ExtraLow® Simmer burners
DIMENSIONS & WEIGHT
TECHNICAL DETAILS
Overall Appliance Dimensions (HxWxD) (in)
35 7/8"–36 3/4" x
35 15/16" x 24 3/4"
Required Cutout Size (HxWxD) (in)
35 7/8"–36 3/4" x 36"
x 24"
120V-3 Prong
Adjustable Range Height (in.)
7/8"
72"
Net Weight (lbs)
451 lbs
Energy Source
Gas
ACCESSORIES (INCLUDED)
Gas Type
Natural Gas 15 mbar
(USA)
1 X Island Trim, 3 X Full Access Telescopic Racks, 1 X Broiler Pan
Alternative Gas Type
Liquid Gas 27.5 mbar
(USA)
Limited Warranty, Entire Appliance,
Parts and Labor
Circuit Breaker (A)
20 A
Volts (V)
120 V
Frequency (Hz)
60 Hz
Plug Type
Power Cord Length (in)
WARRANTY
2 Year
SEE PAGE 2 FOR OPTIONAL ACCESSORIES
T
HERMADOR EXCLUSIVE
Page 1 of 5
09 / 15
PRG364NLH
36-INCH GAS PRO HARMONY® RANGE
WITH GRILL
PROFESSIONAL SERIES, STANDARD-DEPTH, PORCELAIN COOKTOP SURFACE
ACCESSORIES (OPTIONAL)
PABRICKBKN
Black Ceramic Briquettes
with Basket
PAGRIDDLEN
Griddle for Indoor
Electric Grill
PA12LCVRN
12" Pro Grill Cover for
Indoor Electric Grill
PA12CHPBLK
12" Cutting Board
PWOKRINGHC
Wok Ring
PA36GLBH
9" Low Backguard
PAKNOBLUNH
Blue Knob Pro Harmony Kit
PAGRIDDLE
Griddle
36-INCH RANGE DIMENSIONS
36-INCH RANGE CUTOUT DIMENSIONS
Page 2 of 5
09 / 15
PRG364NLH
36-INCH GAS PRO HARMONY® RANGE
WITH GRILL
PROFESSIONAL SERIES, STANDARD-DEPTH, PORCELAIN COOKTOP SURFACE
36-INCH RANGE CUTOUT DIMENSIONS
as defined in the “National Fuel Gas Code” (ANSI Z223.1,
as defined
inClearances
the “National
Fuel Gas Code”materials
(ANSI Z223.1,
Current
Edition).
from non-combustible
are
not partEdition).
of the ANSI
Z21.1 scopefrom
and are
not certified by
Current
Clearances
non-combustible
materials
CSA.
of less
(305 mm)
must
be approved
are Clearances
not part of
thethan
ANSI12”Z21.1
scope
and
are not certified by
by the local codes and/or by the local authority having
CSA. Clearances of less than 12” (305 mm) must be approved
jurisdiction.
by the local codes and/or by the local authority having
jurisdiction.
Page 3 of 5
09 / 15
PRG364NLH
36-INCH GAS PRO HARMONY® RANGE
WITH GRILL
PROFESSIONAL SERIES, STANDARD-DEPTH, PORCELAIN COOKTOP SURFACE
Installation Clearances with Low Backguard
36-INCH RANGE DIMENSIONS AND CLEARANCE REQUIREMENTS WITH “LOW BACK”
NOTE: A 36-inch
minimum clearance is
required between the top
of the cooking surface
and the bottom of an
unprotected cabinet. A
30-inch clearance can be
used when the bottom
of the wood or metal
cabinet is protected by
not less than 1/4 inch of a
flame retardant material
covered with not less
than No. 28 MSG sheet
steel, 0.015 inch (0.4 mm)
thick stainless steel, 0.024
inch (0.6 mm) aluminum,
or 0.020 inch (0.5 mm)
thick copper.
Combustible
Materials
36" (914 mm) min.
to combustible
materials
28" (711 mm)
27¼" (692 mm)
Low Back
9" (229 mm)
245/8" (625 mm)
24" (610 mm)
max. recess depth
35 7/8" (911 mm) Min.
36 ¾" (933 mm) Max.
Combustible
Back Wall
24¾" (629 mm)
23" (584 mm)
447/8" (1140 mm)
Total Clearance
As defined in the “National Fuel Gas Code” (ANSI Z223.1, Current Edition).
Clearances from non-combustible materials are not part of the ANSI Z21.1
scope and are not certified by CSA. Clearances of less than 12" (305 mm)
must be approved by the local codes and/or by the local authority having jurisdiction.
Page 4 of 5
09 / 15
PRG364NLH
36-INCH GAS PRO HARMONY® RANGE
WITH GRILL
PROFESSIONAL SERIES, STANDARD-DEPTH, PORCELAIN COOKTOP SURFACE
Installation Clearances with Flush Island Trim
36-INCH RANGE DIMENSIONS AND CLEARANCE REQUIREMENTS WITH “FLUSH ISLAND TRIM”
Combustible
Materials
36" (914 mm) min.
to combustible
materials
12" (305 mm) min. to
combustible surface
with Flush Island Trim
Shaded area behind
range indicates
minimum clearance
to combustible surfaces,
combustible materials
cannot be located within
this area.
28" (711 mm)
27¼" (692 mm)
For Flush Island
Trim installations,
counter surface should
have a cantilever edge
meeting the back
section of the Flush
Island Trim accessory.
245/8" (625 mm)
Cantilever
35 / " (911 mm) Min.
36 ¾" (933 mm) Max.
7 8
24" (610 mm)
max. recess depth
24¾" (629 mm)
If an inner wall
is used under
the cantilever counter
top, there should be a
1/8" (3 mm) gap from
the rear of the range
to the inner wall.
23" (584 mm)
447/8" (1140 mm)
Total Clearance
As defined in the “National Fuel Gas Code” (ANSI Z223.1, Current Edition).
Clearances from non-combustible materials are not part of the ANSI Z21.1
scope and are not certified by CSA. Clearances of less than 12" (305 mm)
must be approved by the local codes and/or by the local authority having jurisdiction.
These warranties give you specific legal rights and you may have other rights that vary from state to state. Full warranty and limited warranty from date of installation. For complete warranty
details, refer to your Use & Care manual, or ask your dealer.
Specifications are for planning purposes only. Refer to installation instructions and consult your countertop supplier prior to making counter opening. Consult with a heating and ventilation
engineer for your specific ventilation requirements. For the most detailed information, refer to installation instructions accompanying product or write to Thermador indicating the model
number. Specifications are correct at time of printing. Thermador reserves the right to change product specifications or design without notice. Some models are certified for use in Canada.
Thermador is not responsible for products that are transported from the U.S. for use in Canada.
1 800 735 4328 | USA THERMADOR.COM | CANADA THERMADOR.CA | ©2015 BSH HOME APPLIANCES CORPORATION. ALL RIGHTS RESERVED.
Page 5 of 5
09 / 15
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising