Thermador | PRD304WHU | Specifications Sheet | Thermador PRD304WHU Specifications Sheet

Thermador PRD304WHU Specifications Sheet
PRD304WHU
30-INCH DUAL-FUEL PRO HARMONY® RANGE
P R OF ESSION AL SERIES, STAN DAR D -D EPTH , PO R C E L A I N CO O KT O P S U RFA CE
RA N G E T O P
1
3
2
4
Total number of cooktop Burners
4
1 – Power of Back Left Burner BTU
15,000 and XLO
2 – Power of Front Left Burner BTU
18,000 and XLO
3 – Power of Back Right Burner BTU
15,000
4 – Power of Front Right Burner BTU
18,000
OVEN
Oven Capacity
F E AT URES & BEN EFITS
- The Star® Burner delivers superior flame spread for more
even heating
- ExtraLow®, the widest simmer temperature control as low as
100°F
- 2 ExtraLow® burners for simmering, melting, or holding long
durations
- Superfast 2-hour self-clean mode – fastest in the industry
-P
owerful third element convection technology
T E C H N ICAL DETAILS
4.4 cu. ft.
Cooking Modes
Bake, Convection Bake, Extended Bake, True Convection, Convection
Roast, Roast, Convection Broil, Broil
Sabbath
Yes (as Extended Bake –
Knob Control)
Self Clean
Yes
Telescopic Rack(s)
1
Interior Lights
2
Bake Power
2,000 W
Broil Power
4,000 W
Convection Power
2,750 W
240 / 208 V, 60Hz
4 Wire
Home Connect™ (Wi-Fi Enabled)
No
Cavity Interior Dimensions (HxWxD)
16 1/4" x 25" x 18 5/8"
Energy Source
Gas and Electric
Cavity Usable Dimensions (HxWxD)
12" x 22 3/8" x 16 5/8"
Plug Type USA
No Plug
DIMENSIONS & WEIGHT
Power Cord Length
Purchase Separately
Overall Appliance Dimensions (HxWxD)
Gas Supply
3/4"
35 3/4"–36 3/4" x 29 15/16"
x 24 5/8"
Required Cutout Size (HxWxD)
35 3/4"–36 3/4" x 30" x
24"
Net Weight
306 lbs.
Circuit Breaker
Volts
35 A
WA RRAN TY
Limited Warranty, Entire Appliance,
Parts and Labor
2 Year
SEE PAGE 2 FOR INCLUDED AND OPTIONAL ACCESSORIES
THERMADOR® EXCLUSIVE
Page 1 of 6
11 / 18
PRD304WHU
30-INCH DUAL-FUEL PRO HARMONY® RANGE
P R OF ESSION AL SERIES, STAN DAR D -D EPTH , PO R C E L A I N CO O KT O P S U RFA CE
A C C E SSORIES ( IN CL UD ED )
1 Telescopic Rack, 2 Standard Racks, 1 Lg. Broil Pan, Island Trim
A C C E SSORIES ( OPTI O N AL )
PWOKRINGHC
PA12CHPBLK
Wok Ring
Chopping Block / Cutting Board
PAGRIDDLE
PA30WLBH
Professional Griddle, Sits on Top of Grates Over
2 Star Burners, High-Release Coating
Pro Harmony 7" Low Back Backguard*
PALPKITHW
PAKNOBLUWH
LP Conversion Kit Dual-Fuel Pro Ranges and Rangetops
(4 & 6 Burner)
Metallic Blue Knob Kit
COMING
SOON
PAALTKITGW
Natural Gas Models from 5,400 ft.–10,200 ft.
COMING
SOON
Contact Customer Support
Propane Gas or Dual-Fuel Models Connected to LP Gas
from 10,000 ft.–10,200 ft.
*Models PCG305xx, PRD305xx, and PRD606xx are suitable for 0" rear clearance to combustible surfaces. All other models: when using the included Island Trim a minimum 6" (152 mm) rear
clearance is required to a combustible surface. When installing against a combustible surface, a Thermador ® Low Backguard is required for a 0" rear clearance to the combustible surface. A
Thermador Low Backguard must be purchased separately. A rear clearance to a surface covered in a noncombustible material (metal, ceramic tile, brick, marble, or stone) is 0" when using the
included Island Trim. Clearances of less than 6" (152 mm) should be approved by the local codes and/or by the local authority having jurisdiction. Clearances from non-combustible materials are
not part of the ANSI Z21.1 scope and are not certified by CSA.
Page 2 of 6
11 / 18
PRD304WHU
30-INCH DUAL-FUEL PRO HARMONY® RANGE
P R OF ESSION AL SERIES, STAN DAR D -D EPTH , PO R C E L A I N CO O KT O P S U RFA CE
3 0 -I NCH RAN GE DIM EN SI O N S
3 0 -I NCH RAN GE CUTO UT D I M EN SI O N S
Page 3 of 6
11 / 18
PRD304WHU
30-INCH DUAL-FUEL PRO HARMONY® RANGE
P R OF ESSION AL SERIES, STAN DAR D -D EPTH , PO R C E L A I N CO O KT O P S U RFA CE
3 0 -I NCH RAN GE CUTO UT D I M EN SI O N S
as defined in the “National Fuel Gas Code” (ANSI Z223.1,
Current Edition). Clearances from non-combustible materials
are not part of the ANSI Z21.1 scope and are not certified by
CSA. Clearances of less than 12” (305 mm) must be approved
by the local codes and/or by the local authority having
jurisdiction.
Page 4 of 6
11 / 18
PRD304WHU
30-INCH DUAL-FUEL PRO HARMONY® RANGE
P R OF ESSION AL SERIES, STAN DAR D -D EPTH , PO R C E L A I N CO O KT O P S U RFA CE
Installation Clearances with Low Backguard
3 0 -I NCH RAN GE DIM EN SI O N S AN D C L EAR AN C E RE Q U I RE M E N T S W I T H “ L O W BA CK”
NOTE: A 36-inch
minimum clearance is
required between the top
of the cooking surface
and the bottom of an
unprotected cabinet. A
30-inch clearance can be
used when the bottom
of the wood or metal
cabinet is protected by
not less than 1/4 inch of a
flame retardant material
covered with not less
than No. 28 MSG sheet
steel, 0.015 inch (0.4 mm)
thick stainless steel, 0.024
inch (0.6 mm) aluminum,
or 0.020 inch (0.5 mm)
thick copper.
Combustible
Materials
36" (914 mm) min.
to combustible
materials
28" (711 mm)
27¼" (692 mm)
Low Back
9" (178
(229 mm)
7"
245/8" (625 mm)
24" (610 mm)
max. recess depth
35 7/8" (911 mm) Min.
36 ¾" (933 mm) Max.
Combustible
Back Wall
24¾" (629 mm)
22 5/8" (575 mm)
447/8" (1140 mm)
Total Clearance
As defined in the “National Fuel Gas Code” (ANSI Z223.1, Current Edition).
Clearances from non-combustible materials are not part of the ANSI Z21.1
scope and are not certified by CSA. Clearances of less than 12" (305 mm)
must be approved by the local codes and/or by the local authority having jurisdiction.
Page 5 of 6
11 / 18
PRD304WHU
30-INCH DUAL-FUEL PRO HARMONY® RANGE
P R OF ESSION AL SERIES, STAN DAR D -D EPTH , PO R C E L A I N CO O KT O P S U RFA CE
Installation Clearances with Flush Island Trim
3 0 -I NCH RAN GE DIM EN SI O N S AN D C L EAR AN C E RE Q U I RE M E N T S W I T H “ F L U S H I S L A N D T RI M ”
Combustible
Materials
36" (914 mm) min.
to combustible
materials
6" (152 mm) min. to
combustible surface
with Flush Island Trim
Shaded area behind
range indicates
minimum clearance
to combustible surfaces,
combustible materials
cannot be located within
this area.
28" (711 mm)
27¼" (692 mm)
For Flush Island
Trim installations,
counter surface should
have a cantilever edge
meeting the back
section of the Flush
Island Trim accessory.
245/8" (625 mm)
Cantilever
35 / " (911 mm) Min.
36 ¾" (933 mm) Max.
7 8
24" (610 mm)
max. recess depth
24¾" (629 mm)
If an inner wall
is used under
the cantilever counter
top, there should be a
1/8" (3 mm) gap from
the rear of the range
to the inner wall.
22 5/8" (575 mm)
447/8" (1140 mm)
Total Clearance
As defined in the “National Fuel Gas Code” (ANSI Z223.1, Current Edition).
Clearances from non-combustible materials are not part of the ANSI Z21.1
scope and are not certified by CSA. Clearances of less than 12" (305 mm)
must be approved by the local codes and/or by the local authority having jurisdiction.
These warranties give you specific legal rights and you may have other rights that vary from state to state. Full warranty and limited warranty from date of installation. For complete warranty
details, refer to your Use & Care manual, or ask your dealer.
Specifications are for planning purposes only. Refer to installation instructions and consult your countertop supplier prior to making counter opening. Consult with a heating and ventilation
engineer for your specific ventilation requirements. For the most detailed information, refer to installation instructions accompanying product or write to Thermador indicating the model
number. Specifications are correct at time of printing. Thermador reserves the right to change product specifications or design without notice. Some models are certified for use in Canada.
Thermador is not responsible for products that are transported from the U.S. for use in Canada.
1 800 735 4328 | USA THERMADOR.COM | CANADA THERMADOR.CA | ©2018 BSH HOME APPLIANCES CORPORATION. ALL RIGHTS RESERVED.
Page 6 of 6
11 / 18
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising