Miele 52713602USA Product Brochure

Miele 52713602USA Product Brochure
Miele’s new Little Giants for
Small scale laundry operations
Washer extractor PW 6055 and PW 6065
Tumble dryer PT 7135 C and PT 7136
Rotary ironer HM 16-80 and HM 16-83
The Miele laundry system:
The compact solution
The compact solution for hotels and healthcare:
practically orientated, economical laundry care for the in-house
laundry – fast throughput, optimum results and low costs.
Washing
MIELE’S LITTLE GIANTS, PW 6055 and
PW 6065, are the ideal entry level machines
for small, in-house laundries. Featuring a
wide range of standard programmes they
also offer a good selection of additional
functions and programmes to suit a wide
range of applications.
These machines also benefit from Miele's
unique patented Honeycomb drum with a
sculptured surface. A thin film of water
cushions the garments in the drum which
reduces fibre breakage and pilling. After
spinning laundry is easier to unload and
because there is less stress caused to the
load during washing you have the reassurance that your laundry will keep its shape
and last longer.
Tested and approved by the Water Regulation Advisory Scheme, these machines can
be connected to mains water in any
application, including category 5 high risk
establishments e.g. nursing homes, in
accordance with Water Supply (Water
Fittings) Regulations 1999.
2
Drying
The perfect complement to Miele's
PW 6055 and PW 6065 washer-extractors
are the 6.5 kg capacity tumble dryers with
a range of highly developed drying programmes to ensure your laundry gets the
best treatment possible.
The reverse action drum ensures energy
efficient drying with tangle-free results, and
the electronic sensing system means an
automatic process which eliminates
operator guesswork.
Ironing
Miele’s compact HM 16-80 and HM 16-83
rotary ironers provide the perfect finishing
touch for your in-house laundry. They can
cope with up to 15 kg of flatwork per hour
and because they take up very little space,
can be sited against a wall where they are
easy for one operator to use.
Miele –
Adding value!
Miele can look back on decades of experience in developing washer-extractors and
cleaning processes. The concepts and
features of Miele’s professional up-to-theminute washer-extractors, tumble dryers
and high throughput rotary ironers are
based on this experience. The advantage
to the customer is that every establishment
can be given comprehensive advice and a
thorough analysis of its operating and economic requirements. Even the installation
of the machines can be planned down to
the smallest detail, including drawings
where required.
Better
know-how
Miele offers technologically advanced
products that are made in compliance with
DIN EN ISO 9001. Solid construction, high
quality materials, sophisticated technology
and excellence of finish with electronic
components that are designed and made
in-house guarantee the legendary longevity
of Miele machines. The reliability of all
components and patented technologies
are further examples of the optimising of
Miele quality through technical innovation.
“Forever better” – or “Immer besser” has
been the cornerstone of Miele’s philosophy for over one hundred years. Miele was
awarded the “Best practice” award 2002
for innovation, reliability and quality of
product by the Institute for Productivity and
Quality (IPQ).
From start to finish, Miele is the professional partner for your laundry – perfect
laundry care for satisfied customers. Easy
access to Miele ensures prompt attention
for all enquiries, while Miele’s network of
sales and service centres guarantees fast
assistance when help is needed. Special
maintenance and service contracts ensure
down-time is minimised and provides extra
peace of mind.
Better
service
Better
quality
3
MIELE’S LITTLE GIANTS
Washer-extractors
The advantages of Miele’s Professional technology
PW 6065 PLUS
Quality build
Miele machines are made with the highest
quality materials and expert workmanship.
All components, from the shock-absorbers
on the drum cradle and the drum bearings
to the outer casing and the very last nut
and bolt in the machines, are quality tested
to ensure many years of good service.
Depending on model both the washerextractors and tumble dryers are available
with either a high-grade stainless steel
housing, or a high-quality vitreous direct
enamel housing which is resistant to corrosion, yellowing and chipping.
Spaceframe construction
Many machines are awkward to service
because opening them to access components is a lengthy process. With a MIELE
LITTLE GIANT the front, sides and lid are
easily removed by undoing a few screws,
so all major working parts are easy for a
service engineer to access.
4
Patented Honeycomb drum
Miele's unique patented Honeycomb drum
is made from high grade stainless steel.
With a sculptured surface, a thin film of
water cushions the garments in the drum to
reduce fibre breakage and pilling. The specially designed drum ribs together with
optimised drum rhythms help drench the
laundry quickly so programme durations
are shorter, water consumption levels are
kept down and your laundry gets the best
possible care.
Large capacity drum with drum lighting
The new drums have a maximum load
capacity of 5.5 kg (PW 6055) or 6.5 kg
(PW 6065) dry weight and are ideal for the
efficient processing of large quantities of
laundry. With a 30 cm wide door aperture,
access for loading and unloading has been
improved, and because the drum has
integrated lighting there is no danger of
leaving something behind when unloading
it.
Efficient professional motor
The powerful asynchronous motor with its
frequency-controlled drive system enables
a gentle run-up to spin and high spin
speeds of up to 1400 rpm to be achieved.
A patented two-stage imbalance sensing
system guarantees optimum laundry distribution during spinning, ensures maximum
spinning performance and is a contributing
factor to the legendary longevity of Miele
machines. With a G-factor of 526, water
extraction is very efficient and laundry can
be dried quickly and efficiently in the
matching tumble dryer afterwards.
Individual solutions for individual
requirements
Up to 4 liquid detergent dispensing pumps
can be connected to the machine for
simple, precise and economical dispensing. The machines can also be connected
to a payment system and are equipped
with a serial interface for connection to a pc
or printer.
PROFITRONIC L controls
New PROFITRONIC L electronic controls
with multi-function selector and user navigation offer a wide range of standard programmes as well as a number of special
ones for dealing with a wide range of
fabrics and particular requirements e.g.
Kitchen linen, Table linen, Curtains, Pillows,
Outerwear and Proofing. With additional
features such as programme delay and a
time left display these machines enable the
user to manage their time efficiently.
Healthcare applications
Dump valve drain versions feature two
sluice and thermal disinfection programmes meeting Department of Health guidelines HSG (95) 18, and conform to the
requirements of The Care Standard Act
2000.
Installation friendly
Where space is at a premium a Miele
tumble dryer can be stacked on top of the
washer-extractor using a special stacking
kit. This option only requires 600 x 700 mm
of floor space!
Short programme durations
Quick wash programmes enable fast processing times and efficient laundry turnaround. With this faster throughput more
programmes can be run daily and you can
maintain smaller stocks of laundry.
1
2
3
4
5
PROFITRONIC L
1–4 Short cut buttons (PLUS versions only)
5 Display
6 Start
7 Optical interface for PC
8 Multifunction dial for selecting and confirming features
9 Door button
6
7
8
9
5
MIELE’S LITTLE GIANTS
Tumble dryers
Large filter in the new dryers
PT 7136 PLUS
Patented Honeycomb drum
The hexagonal pattern in the drum on the
tumble dryers is convex, creating air
pockets to gently catch and cushion the
laundry as it tumbles to the bottom of the
drum. This allows warm air to surround the
laundry enabling more efficient drying. And
with less friction between fabric and the
drum, laundry comes out smoother and
less creased, so finishing is easier too.
Large area fluff filter
The large surface area of fluff filter on the
vented dryer is capable of collecting the
fluff from up to 16 drying cycles (depending
on the type of fabric being dried).
6
Vented or Condenser?
MIELE'S LITTLE GIANT tumble dryers are
available in both vented and condenser
versions. The condenser tumble dryers
also have a pump-away facility to drain the
condensate through a waste pipe at the
rear which can be connected to a sink,
drain outlet, etc. So whatever the site
conditions there's a dryer to suit!
Winning combination
MIELE'S LITTLE GIANT tumble dryers with
their extremely short programme durations
and large drum capacity enable large
quantities of laundry to be processed
quickly and efficiently. With short turnaround times you can reduce the amount of
time spent processing laundry each day.
Spaceframe construction
Many machines are awkward to service
because opening them to access components is a lengthy process. With a MIELE
LITTLE GIANT the front, sides and lid are
easily removed by undoing a few screws,
so all major working parts are easy for a
service engineer to access.
Installation friendly
Where space is at a premium the tumble
dryer can be stacked on top of a Miele
washer-extractor using a special stacking
kit. (See illustration on page 5). This option
only requires 600 x 700 mm of floor space!
PROFITRONIC L controls
New PROFITRONIC L electronic controls
with multi-function selector and user navigation allow easy programme selection of a
wide suite of programmes to cater for all
your laundry needs. A large clear text display also shows useful information such as
how long a programme has left to run, and
a 24h delay start features enables the user
to choose when they want to run a programme, facilitating efficient time management.
1
2
3
Timed drying or sensor drying
An electronic moisture sensor constantly
monitors the residual moisture level of the
load in the sensor drying programmes
ensuring that laundry is gently tumbled to
the exact degree of dryness required.
Where timed drying is preferred there is the
choice of a cool air or hot air timed drying
programme.
4
5
PROFITRONIC L
1–4 Short cut buttons (PLUS versions only)
5 Display
6 Start
7 Optical interface for PC
8 Multifunction dial for selecting and confirming features
9 Door button
6 7
8
9
7
MIELE’S NEW LITTLE GIANTS
PW 6055 and PW 6065 washer-extractors
Miele's compact washer-extractors with honeycomb drum are ideal
for the small, professional in-house laundry – or the perfect additional
machine for individual departments within a larger establishment.
PW 6065 in stainless steel
PW 6055 PLUS in white
Washer-extractor PW 6055 and
PW 6055 PLUS
• Load capacity: 5.5 kg
• Honeycomb drum, volume: 54 litres
• Spin speed: 1400 rpm
• g-Factor: 526, initial residual moisture
50%
• Available with stainless steel lid and white
front and sides
Wash system
• Flowmeter controlled water intake for
optimum water usage
• Scoop and ladle technology for rapid
saturation of laundry
• Gentle drum acceleration and imbalance
monitoring for lower noise levels and
better garment handling
Optional extras
• Pumps for liquid dispensing
(kit required)
• Plinths
• Can be fitted with optional external
payment system
• Optional interface for PC connection
• Serial interface RS 232
Dispensing system
• Detergent drawer in front of machine
• Pre-equipped with connection points for
4 external dispenser pumps
Washer-extractor PW 6065 and
PW 6065 PLUS
• Load capacity: 6.5 kg
• Honeycomb drum, volume: 59 litres
• Spin speed: 1400 rpm
• g-Factor: 526, initial residual moisture
50%
• Available with stainless steel lid and white
front and sides or with stainless steel lid,
front and sides
Controls
• PROFITRONIC L controls
• PLUS versions also benefit from
Short cut buttons for simple programme selection
• Door release button
Features
• 2 special heating elements
• Hot and cold water connections
• Drain pump (LP) or
• Dump valve (AV)
• Electric heating
• Drum lighting
Construction
• Stainless steel suds container and
patented honeycomb drum
• All parts are coded for easy recycling at
the end of their useful life
• Easy to install, can be sited free-standing
or in a stack with matching tumble dryer
All other features are the same as on the
PW 6055 / PW 6055 PLUS
For technical data see page 12 & 13
8
MIELE’S NEW LITTLE GIANTS
PT 7135 C and PT 7136 tumble dryers
Miele's compact dryers with honeycomb drum are the perfect
combination for the Little Giant washer-extractors.
PT 7135 C in stainless steel
PT 7136 PLUS in white
PT 7135 C and PT 7135 C PLUS
• Condenser dryer
• Condenser drying system, condensate
drained away via drain hose at rear of
machine
• Load capacity: 6.5 kg
• Honeycomb drum, volume: 130 litres
• Available with stainless steel lid and white
front and sides or with stainless steel lid,
front and sides
Controls
• PROFITRONIC L controls
• PLUS versions also benefit from
Short cut buttons for simple programme selection
• Electric heating
• Drum lighting
Drying system
• Condenser drying system, condensate
drained away via drain hose at rear of
machine
• Sensitive drying system for precise
monitoring of residual moisture levels
Construction
• Stainless steel patented honeycomb
drum
• All parts are coded for easy recycling at
the end of their useful life
• Easy to install, can be sited free-standing
or in a stack with matching washerextractor
Optional extras
• Plinths
• Can be fitted with optional external
payment system
• Optional interface for PC connection
• Serial interface for RS 232
Tumble dryer PT 7136 and
PT 7136 PLUS
• Vented drying system
• Load capacity: 6.5 kg
• Honeycomb drum, volume: 130 litres
• Large capacity filter
• Available with stainless steel lid and white
front and sides or with stainless steel lid,
front and sides
All other features are the same as on the
PT 7135 C / PT 7135 C PLUS
For technical data see page 12 & 13
9
The perfect finish
with small, compact rotary ironers
Rotary ironers create the perfect finishing touch to the in-house
laundry: they are easy to use, and provide a high standard of finish to
a wide range of flatwork. The two ironers featured here are both
return feed models which require little space for installation and can
be operated by one person.
HM 16-83
Output figures according to DIN 11 902
Depending on the initial residual moisture
and the type of ironer, an output of up to
15 kg/h can be achieved.
Miele’s rotary ironers create an absolutely
perfect finish for your linen without the use
of starch. The output levels achieved in
practice are on average 20–40% lower than
the maximum output level. The actual output depends on the skill and experience of
the operator, the type of laundry being
handled, how it is pre-sorted, the condition
of the rotary ironer and the standard of
finish required.
10
HM 16-80
HM 16-80:
HM 16-83:
HM 16-80 and HM 16-83:
Features
• Roller diameter 160 mm
• Roller length 830 mm
• Electric heating
• Water reservoir for steam finishing
• Output up to 15 kg/h at 20% residual
moisture
Features
• Roller diameter 160 mm
• Roller length 830 mm
• Electric heating
– Output up to 15 kg/h at 20% residual
moisture
Safety features
• Patented finger guard
• Manual separation of heater plate from
roller in event of a power cut
• Temperature limiter
Controls
• Freely selectable temperatures
• Freely selectable roller speed
Construction
• Folding frame for easy storage
• Feed-in and return of laundry to the front
– Can be installed against a wall
• Aluminium heater plate
• H x W x D: 960 x 985 x 380 mm
• Polyester needle felt roller padding with
ARAMID needle-felt cloth
• Foot operated control bar
• Chrome laundry rail
Controls
• Freely selectable temperatures
• Freely selectable roller speed
Installation
• Simple installation with 13 A moulded
plug
Construction
• Feed-in and return of laundry to the front
– Can be installed against a wall
• Aluminium heater plate
• H x W x D: 960 x 1050 x 380 mm
• Polyester needle felt roller padding with
ARAMID needle-felt cloth
• Foot operated control bar
• Chrome laundry rail
11
MIELE’S NEW LITTLE GIANTS
Washer-extractors PW 6055 and PW 6065
Model number
PW 6055
PW 6065
Capacity (kg)
5.5
6.5
HONEYCOMB DRUM, volume (l)
54
59
Spin speed (max. rpm)
1400
1400
G-factor
526
526
Residual moisture (%)
50
50
PROFITRONIC L
•
•
24 h Delay Start feature
•
•
Cold water, 1/2” with 3/4” threaded union
•
•
Hot water, 1/2” with 3/4” threaded union
•
•
Drain pump or dump valve
DN 22
DN 22/DN 70
•
•
•
•
Dispenser for 4 x liquid agents (conversion kit required)
•
•
Payment system
•
•
External dimensions H/W/D (mm)
850/595/720
850/595/720
Weight (kg)
107
109
Suitable for stacking
•
•
Controls
Plumbing
Electrical connection – see chart below
Asynchronous motor with frequency converter
Detergent dispenser
3 compartment dispenser drawer
Optional extras
Dimensions, weight
External finish
Front and sides white, lid stainless steel
•
•
Front, sides and lid in stainless steel, Zermatt silver control panel
–
•
Cold *
Hot *
Cold *
Hot *
59
49
59
49
59
49
59
49
Programme durations in minutes (AV version)
Cottons 60°C
Programme durations in minutes (LP version)
Cottons 60°C
* Cold water 15°C, Hot water 70°C in accordance with EN 60 456
12
Versions available
Mat No
Model No
6573280
PW 6055
6573250
PW 6055
6573210
PW 6055
Voltage
230 V/1N/50
230 V/1N/50
400 V/2N/50
Amps
1 x 13
1 x 30
2 x 16
Drainage
Drain pump
Drain pump
Drain pump
Finish
White
White
White
6785160
6785130
6785150
PW 6055 Plus 230 V/1N/50
PW 6055 Plus 230 V/1N/50
PW 6055 Plus 400 V/2N/50
1 x 13
1 x 30
2 x 16
Drain pump
Drain pump
Drain pump
White
White
White
6529810
6529800
6573660
6573640
6529840
6529830
6573700
6574110
PW 6065
PW 6065
PW 6065
PW 6065
PW 6065
PW 6065
PW 6065
PW 6065
230 V/1N/50
400 V/2N/50
230 V/1N/50
400 V/2N/50
230 V/1N/50
400 V/2N/50
400 V/2N/50
230 V/1N/50
1 x 30
2 x 16
1 x 30
2 x 16
1 x 30
2 x 16
2 x 16
1 x 30
Drain pump
Drain pump
Dump valve
Dump valve
Drain pump
Drain pump
Dump valve
Dump valve
White
White
White
White
Stainless steel
Stainless steel
Stainless steel
Stainless steel
6787910
6787900
6787880
6787870
PW 6065 Plus
PW 6065 Plus
PW 6065 Plus
PW 6065 Plus
230 V/1N/50
400 V/2N/50
230 V/1N/50
400 V/2N/50
1 x 30
2 x 16
1 x 30
2 x 16
Drain pump
Drain pump
Dump valve
Dump valve
White
White
White
White
Programme chart
Standard programmes
PW 6055
PW 6065
PW 6065
Sluice
•
•
•
•
•
•
•
•
•
•
Sluice High
–
*
Sluice Low
–
*
Cottons Hygiene 95°C
•
•
Cottons Universal 40°C / 60°C
•
•
Minimum Iron 30°C / 40°C / 60°C
•
•
Delicates 30°C
•
•
Denim 40°C
•
•
Woollens 30°C
•
•
Spin
•
•
Drain
•
•
Special programmes
(selectable only via the Settings / Supervisor level menu)
Kitchen linen 60°C
•
•
•
Table linen 40°C
•
•
•
Curtains 30°C
•
•
•
Pillows 60°C
•
•
•
Outerwear 40°C
•
•
•
Proofing 30°C
•
•
•
* N.B. The sluice programmes are available via the settings / supervisor
level menu on this machine, but only if it is equipped with a Dump valve.
They must not be used on Drain valve version machines!
Programme chart
Standard programmes
PW 6055
Plus
–
–
•
•
•
•
•
•
•
•
•
•
•
•
PW 6065
Plus
*
*
•
•
•
•
•
•
•
•
•
•
•
•
PW 6065
Plus Sluice
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Sluice High
Sluice Low
Cottons Hygiene 70°C–95°C
Cottons Universal Cold – 60°C
Minimum Iron 30°C–60°C
Delicates 30°C–60°C
Quick wash Cold – 40°C
Woollens Cold – 30°C
Silks Cold – 30°C
Shirts Cold – 60°C
Denim Cold – 40°C
Towelling 60°C–95°C
Spin
Drain
Special programmes
(selectable only via the Settings / Supervisor level menu)
Kitchen linen 60°C–95°C
•
•
•
Table linen 30°C–60°C
•
•
•
Curtains Cold – 40°C
•
•
•
Pillows 40°C–95°C
•
•
•
Outerwear Cold – 40°C
•
•
•
Proofing 30°C–40°C
•
•
•
Hygiene
•
•
•
Thermal disinfection at 85°C
•
•
•
* N.B. The sluice programmes are available via the settings / supervisor
level menu on this machine, but only if it is equipped with a Dump valve.
They must not be used on Drain valve version machines!
13
MIELE’S NEW LITTLE GIANTS
Tumble dryers PT 7135 C and PT 7136
Model number
PT 7135 C
PT 7136
Capacity (kg)
6.5
6.5
HONEYCOMB DRUM, volume (l)
130
130
Condenser dryer
•
–
Vented dryer with air recycling system
–
•
•
•
•
•
External dimensions H/W/D (mm)
850/595/700
850/595/700
Weight (kg)
58
56
Suitable for stacking
•
•
Controls/programmes
Programmable PROFITRONIC L controls
Electrical connection – see chart below
Optional extras
Payment system
Dimensions, weight
External finish
Front and sides white, lid stainless steel
•
•
Front, sides and lid in stainless steel, Zermatt silver control panel
•
•
Versions available
Mat No
Model No
6592600
PT 7135 C
98010293
PT 7135 C Plus
6592610
PT 7135 C
6555230
PT 7136
6555220
PT 7136
6785090
PT 7136 Plus
6785120
PT 7136 Plus
6785080
PT 7136 Plus
6555270
PT 7136
6555240
PT 7136
14
Voltage
230 V/1N/50
230 V/1N/50
230 V/1N/50
230 V/1N/50
400 V/3N/50
230 V/1N/50
230 V/1N/50
400 V/3N/50
230 V/1N/50
400 V/3N/50
Amps
1 x 13
1 x 13
1 x 13
1 x 30
3 x 16
1 x 30
1 x 13
3 x 16
1 x 30
3 x 16
Finish
White
White
Stainless steel
White
White
White
White
White
Stainless steel
Stainless steel
Rotary ironers
Model number
HM 16-80
HM 16-83
Roller diameter (mm)
160
160
Roller length (mm)
830
830
Aluminium heater plate
•
•
Cover: polyester-needle felt/Aramid needle felt cloth
•
•
Heating, electric (EL)
EL
EL
AC 220–240 V 50–60 Hz
•
•
Heater rating [kW]
2.6–3.1
2.5–3.0
Total connected load [kW]
2.7–3.2
2.6–3.1
Fuse rating [A]
1x13
1x13
Electrical connection
Output
Roller speed (m/min)
2–4.5
2–4.5
Roller speed (rpm)
4–9
4–9
20% residual moisture (up to kg/h)
15
15
•
•
External dimensions H/W/D (mm)
960/985/380
960/1050/380
Height when folded
1052
–
Width when folded
500
–
Weight (kg)
39
38
Laundry return feed
To the front
Dimensions, weight
Output figures according to DIN 11 902
The output levels achieved in practice are on average 20-40% lower than the maximum output level. The actual output depends on the skill and
experience of the operator, the type of laundry being handled, how it is pre-sorted, the condition of the rotary ironer and the standard of finish required.
Programme chart PT 7135 C, PT 7135 C Plus, PT 7136 C and PT 7136 C Plus
Standard
Settings
Low temperature
programmes
option
Cottons
Extra dry; Normal +; Normal; Hand iron ;
Yes
Hand iron
; Machine iron
Minimum Iron
Normal +; Normal; Hand iron ,
Yes
Denim
Normal; Hand iron ,
No
Shirts
Normal; Hand iron ,
No
Outerwear
Normal; Hand iron ,
No
Towelling
Normal +
No
Woollens handcare
No
Smoothing
No
Proofing
No
Cool air
Timed drying
No
Warm air
Timed drying
Yes
15
Miele Company Limited
Fairacres
Marcham Road
Abingdon
Oxon OX14 1TW
Telephone: (01235) 554455
Telefax: (01235) 554477
Internet: www.miele-professional.co.uk
E-mail: [email protected]
Miele worldwide:
AUSTRALIA
Miele Australia Pty. Ltd.
Box 381
Ferntree Gully,
Melbourne, VIC 3156
Tel. +61(0)3/97 64 71 00
Telefax +61(0)3/97 64 71 29
AUSTRIA
Miele Gesellschaft mbH.
Zentrale Salzburg
Mielestr. 1
5071 Wals/Salzburg
Tel. +43(0)6 62/85 84-4 26
Telefax +43(0)6 62/85 84-419
BELGIUM
N.V. Miele S.A.
1730 Mollem
Industriezone Asse 5, Nr. 22.1
Hof te Bollebeeklaan 9
Tel. +32(0)2/451.14.11
Telefax +32(0)2/451.14.14
CANADA
Miele Limited
55G East Beaver Creek Road
Richmond Hill, Ontario L4B 1E5
Tel. +1(0)9 05/7 07-11 71
Telefax +1(0)9 05/7 07-01 77
CZECH REPUBLIC
Miele spol. s.r.o.
61700 Brno, Hněvkovského 81B
Tel. +420(0)5/4 35 53-1 11
Telefax +420(0)5/4 35 53-1 19
DENMARK
Miele A/S
2600 Glostrup, Erhvervsvej 2
Tel. +45 43 27 11 00
Tel. Salg/Professional
+45 43 27 15 00
Tel. Jylland +45 97 12 70 66
Telefax hovednr. +45 43 27 11 09
Telefax Salg/Professional
+45 43 27 15 09
FINLAND
Miele Oy
01200 Vantaa, Porttikaari 6
Tel. +358(0)9/87 59 70
Telefax +358(0)9/87 59 72 99
FRANCE
Miele S.A.S.
93151-Le Blanc-Mesnil (Paris)
9 avenue Albert Einstein
Tel. +33(0)1/49 39 34 35
Telefax +33(0)1/49 39 44 38
GERMANY
Miele & Cie. KG
Carl-Miele-Straße 29
33332 Gütersloh
Tel.: 0 180 220 21 21 (6 ct/min)*
Fax: 0 180 111 20 30*
*Only in Germany
www.miele-professional.de
[email protected]
GREECE
Miele Hellas GmbH
154 51 N. Psychiko-Athen
Mesogion 257
Tel. national 01/10 6 79 44 44
international 00 30/2/10 6 79 44 44
Telefax 01/10 6 79 42 09
international 00 30/2/10 6 79 42 09
HUNGARY
Miele Kft.
Hungária krt. 179 - 187
1146 Budapest
Tel. national 061/4 22-31 80
international 00361/4 22-31 80
Telefax +3(0)61/3 83 -93 04
HONG KONG
Miele Hong Kong Ltd.
AIA Plaza, Room 401, 4th Floor,
18 Hysan Avenue,
Causeway Bay, Hong Kong
Tel. +852/26101331
Fax +852/26101013
IRELAND
Miele Ireland Ltd., Dublin 24
Broomhill Road
Tallaght
Tel. +353(0)1/461 07 10
Telefax +353(0)1/461 07-97
ITALY
Miele Italia G. m. b. H.
39057 Eppan
Umfahrungsstraße 27
Tel. +39 04 71/66 61 11
Telefax +39 04 71/66 63 34
JAPAN
Miele Japan Corp.
150-0044 Tokyo, Shibuya-ku
Maruyamacho 3-6,
E Space Tower 11F
Tel.: +81-3-57 84-0036
Fax: +81-3-57 84-0037
KOREA
Miele Korea Limited
Miele Haus, 607-10 Yeoksam-dong
Gangnam-gu
SEOUL 135-080
Tel. +82 2 3451 9343
Telefax +82 2 3451 9399
LUXEMBOURG
Miele s.à r.l.
20, Rue Christophe Plantin
2339 Luxembourg
Tel. +352/4 97 11-25
Telefax +352/4 97 11-39
MEXICO
Miele S.A. de C.V.
Av. Santa Fé 170
German Centre 0-4-2
Col. Lomas de Santa Fé
01210, México, D.F.
Tel. +52/55/85 03 98 70 und
+52/55/85 03 98 73
Telefax +52/55/85 03 98 74
NETHERLANDS
Miele Nederland B.V.
4131 NR Vianen, De Limiet 2
Tel. +31(0)3 47/37 88 83
Telefax +31(0)3 47/37 84 29
NORWAY
Miele AS
Løxaveien 13
1351 Rud
Tel. +47/67 17 31 00
Telefax +47/67 17 31 10
POLAND
Miele Sp. z. o. o.
02-683 Warszawa
Ul. Gotarda 9
Tel. +48/22/5 48 40 00
Telefax +48/22/5 48 40 10
PORTUGAL
Miele Portuguesa, Lda.
Av. do Forte, 5
2795-504 Carnaxide
Tel. +351/21/42 48-100
Telefax +351/21/42 48-109
SWITZERLAND
Miele AG
8957 Spreitenbach
Limmatstr. 4
Tel. +41(0)56/4 17 20 00
Telefax +41(0)56/4 17-24 69
RUSSIA
000 Miele CIS
129164 Moskau
Zubarev per., 15-1
Tel. +7/095/745 89 90
Telefax +7/095/745 86 80
TURKEY
Miele Elektrikli Aletler
Dış. Tic. ve Paz. Ltd. Şti.
Güvercin Sokak No. 10
80620 Levent-Istanbul
Tel. +90/2 12/3 25 84 40
Telefax +90/2 12/3 25 84 49
SINGAPORE
Miele Pte. Ltd.
163 Penang Road #04-02/03
Winsland House II
Singapore 238463
Tel. +65/67 35 11 91 oder
+65/65 62 88 95
Telefax +65/67 35 11 61
SLOVAKIA
Miele spol. s. r. o.
Plynàrenskà 1
82109 Bratislava
Tel. +421/2/53 63 37 37
Telefax +421/2/53 63 37 46
SLOVENIA
Werkkundendienststelle
Miele d.o.o.
Brodisce 15
1236 Trzin
SOUTH AFRICA
Miele SA (Pty) Ltd.
63 Peter Place
Bryanston 2194
PO Box 69434
Bryanston 2021
Tel. +27(0)11/5 48-19 00
Telefax +27(0)11/5 48-19 35
UKRAINE
TOV Miele
Podil Plaza
30 A, Spasskaya St.
04070 Kiev
UNITED ARAB EMIRATES
Miele Appliances Ltd.
Mankhool Road 1
Nashwan Building
P.O. Box 11 47 82, DUBAI
Tel. +971-4-39897-18
Telefax +971-4-39897-19
USA
Miele, Inc.
9 Independence Way
Princeton, NJ 08540
Tel. 001-800/843 72 31
Telefax 001-609/419 42 41
OTHER COUNTRIES:
Sales International
Miele & Cie. KG
Carl-Miele-Straße 29
33332 Gütersloh
Tel.: +49(0)52 41-89 15 07
Fax: +49(0)52 41-89 15 00
SPAIN
Miele S.A.
28108 Alcobendas (Madrid)
Carretera de Fuencarral, 20
Tel. +34/91/6 23 20 00
Telefax +34/91/6 62 02 66
SWEDEN
Miele AB
Industrivägen 20
171 27 Solna
Tel. +46(0)8/5 62 29-000
Telefax +46(0)8/5 62 29-209
Please do not hesitate to contact us if you
require further information on these
machines, or on any of our other products.
The images, logos, names and trading marks used in this
brochure to identify Miele, our products and services are our
proprietary marks whether registered or unregistered. These
may only be used with the express permission of Miele.
Caring for the environment: this brochure is printed on paper
bleached without the use of chlorine
© Miele & Cie. KG, Gütersloh / M.-Nr. 6 621 712/GB M.-Nr. 98 024 500 / All rights reserved (XX-D) / BO 2844 – 08/06
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement