Vinotemp | VT-WINEDRAWER | Owner's Manual | Vinotemp VT-WINEDRAWER Owner's Manual

Vinotemp VT-WINEDRAWER Owner's Manual
Two Drawer Wine &
Beverage Cooler
O W N E R ’ S
W W W . V I N O T E M P . C O M
W W W . V I N O T E M P . C O M
Your Wine Cooler
This unit can be used for storage and/or service. The unit has a glass door and a soft interior
light to elegantly display your wine.
Serving Wines
Storing wines at the proper temperature is important. To preserve them as long as possible,
wine should be stored at approximately 55° Fahrenheit. However, the chart below suggests
the optimal drinking temperature for the different styles of wine.
Wine Style
Armagnac, Brandy, Cognac
Full Bodied Red wines, Shiraz
Tawny Port
Medium Bodied Red Wines
Amontillado Sherry
Light Bodied Red Wines
Full Bodied White Wines
Medium Bodied White Wines
Rosé, Light Bodied White Wines
Vintage Sparkling
Fino Sherry
Non Vintage Sparkling
17621 South Susana Road, Rancho Dominguez, California 90221
General Operating Instructions
Remove all external and internal packaging from your wine cooler. Be
sure that all parts have been included before discarding any packaging
materials. You may want to keep the box and packing materials for use at
a later date.
Upon receipt and inspection of unit, the supply cord must be replaced if it
is damaged. Contact our customer service at 1-800-777-8466
Let the unit rest UNPLUGGED for 24 hours once you have it placed
in your home.
-Save these instructions-
To register your product, visit:
Register your warranty within 10 days of receiving the unit.
Please be sure to retain your proof of purchase.
W W W . V I N O T E M P . C O M
IMPORTANT SAFETY INSTRUCTIONS .................................................. 6
ELECTRICAL CONNECTION ............................................................... 7
PARTS AND SPECIFICATIONS ........................................................... 8
INSTALLATION ............................................................................... 9
OPERATING YOUR WINE COOLER .................................................... 10
CARE AND MAINTENANCE .............................................................. 12
CIRCUIT DIAGRAM ........................................................................ 13
TROUBLESHOOTING ...................................................................... 14
TERMS OF SALE AND WARRANTY .................................................... 15
SERVICE & IMPORTANT NOTICE ...................................................... 16
17621 South Susana Road, Rancho Dominguez, California 90221
To reduce the risk of fire, electrical shock or injury when using
your appliance, follow these basic precautions:
Do not operate this or any other appliance with a damaged cord.
Do not operate if housing is removed or damaged.
Exercise caution and use reasonable supervision when appliance is used near children. Never
allow children to operate, play with or crawl inside the appliance. Keep packing materials away
from children.
Before performing any maintenance or cleaning, ensure that the unit is unplugged or that the
power line is disconnected.
Do not clean appliance with flammable fluids. Do not store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any other appliance. The fumes can create a fire hazard
or explosion.
Exercise caution when moving and installing the unit. The cooler is heavy and may require two or
more people when moving the unit to prevent strain or injury.
Unit features a front exhaust system for freestanding or fully recessed applications.
Locate the unit away from direct sunlight and sources of heat (stove, heater, radiator, etc).This
unit is intended for indoor use only and must be installed in an area protected from the elements.
This appliance in intended for use in a controlled ambient location such that the ambient
temperature does not exceed 90˚F.
Place the appliance on a solid, level surface.
Do not attempt to repair or replace any part of your appliance unless it is specifically
recommended in this manual. All other servicing should be referred to a qualified technician.
Connect to properly polarized outlets only. It is recommended that a separate circuit, serving only
your appliance be provided. Use receptacles that cannot be turned off by a switch or pull chain.
Be sure that the plug is fully inserted into the receptacle.
To protect against electric shock, do not immerse appliance, plug or cord in water or other liquids.
Avoid locating the unit in moist areas.
Do not use this appliance for anything other than its intended purpose as described in this manual.
For indoor, household use only.
Do not operate the unit with wet hands, while standing on a wet surface or while standing in water.
Do not use solvent-based cleaning agents or abrasives on the interior of the cooler. These
cleaners may damage or discolor the interior.
Keep fingers out of pinch point areas and be careful when closing doors if children are around.
This appliance is designed for storing and cooling wines and beverages. Do not store perishable
food or medical products within the unit.
When disposing of refrigeration appliances, special handling is often required. It is the consumer’s
responsibility to comply with federal and local regulations when disposing of this product.
WARNING: Risk of child entrapment and suffocation. Before you throw away this or an old unit,
remove the door. Leave the shelves in place, so that children may not easily climb inside.
W W W . V I N O T E M P . C O M
Improper use of the grounded plug can result in the risk of electrical shock.
If the power cord is damaged, frayed or shows cracks or abrasions across
its length, have it replaced at an authorized service center.
For your protection, this unit is equipped with a 3-conductor cord set that has a molded 3-prong
grounding-type plug, and should be used in combination with a properly connected grounding-type
• Do not under any circumstances cut or remove the third ground prong from the power cord
supplied. For personal safety, this appliance must be properly grounded.
• The cord should be secured behind the unit and not left exposed or dangling to prevent
accidental injury.
• A standard electrical supply (115V AC - 60Hz), properly grounded in accordance with the
National Electrical Code and local codes and ordinances, is required.
• When a standard 2-pin wall outlet is encountered, it is your responsibility to have it replaced
with a properly grounded 3-pin wall outlet.
• Never unplug the unit by pulling the power cord. To disconnect the appliance, always grip the
plug firmly and pull straight out from the wall outlet. When moving the unit, be careful not to
damage the power cord.
• The unit should always be plugged into its own individual electrical outlet with a voltage rating
that matches the rating label on the unit.
• Do not pinch or kink the power supply cord.
• Repair or replace all power cords that have become frayed or damaged. Do not use a cord
that shows cracks or abrasion damage along its length or at either end. When moving the
appliance, be careful not to damage the power cord.
Extension Cord
CAUTION: It is strongly recommended that you do not use an adapter
or an extension cord with this unit.
17621 South Susana Road, Rancho Dominguez, California 90221
Upper door handle
Upper door
C/F switch
Upper zone temperature
5. Upper zone light
6. Lower zone temperature
7. Lower door handle
8. Lower door
9. Panel
10. Body
11. Front exhaust grille
12. Foot
13. Upper zone NTC
14. Upper zone fan
Model No.
15. Upper zone shelf
16. Rear exhaust window
17. Lower light
18. Lower zone fan
19. Lower zone NTC
20. Rear exhaust window
21. Lower zone shelf
22. Right and Left sliding shelf
AC 115V
60 Hz
R134a/1.94 oz
Power Consumption
1.31 kw.h/25 h
Input Power
Ambient Temperature Range
60°- 90°F
Control Temperature Range
40°- 72°F
21 bottles & 24 cans
Net Weight
163.4 LBS
Gross Weight
174.1 LBS
Dimensions (W x D x H)
23.43" x 22.44" x 32.28”
*Note: This wine and beverage cooler is designed to store approximately 21 standard Bordeaux 750
ml bottles in the lower zone and 24 8-12oz cans in the upper zone. Storing large and/or oddly shaped
bottles (including champagne and sparkling wine bottles) will decrease the capacity of your appliance.
W W W . V I N O T E M P . C O M
Remove all packing material before using your appliance.
IMPORTANT: Before connecting the unit to a power source, let it stand upright for approximately
24 hours. This will reduce the possibility of a malfunction in the cooling system from handling
during transportation.
Clean the interior surface with lukewarm water and a soft cloth.
This unit is designed for freestanding and indoor use only. Position the unit in a dry and wellventilated place. Avoid placing the cooler near any source of heat or moisture, or in direct sunlight.
Do NOT install the unit in a location with an ambient temperature that will fall below 60°F.
For freestanding installation, 5” of space at the back and both sides are suggested to ensure
proper air circulation to cool the compressor and condenser.
For built-in installation, leave a ¼” (6.35mm) space on each side and at the top, and 1-2” at the
back of the wine cooler to ensure proper air circulation to cool the compressor and condenser.
Also, be sure to not obstruct the front exhaust vent with anything as this may prevent the unit from
performing properly.
Place the appliance on a level surface strong enough to support it when it is fully loaded. To
level the wine cooler, adjust the front leveling legs at the bottom of the unit.
For best performance it is recommended that you install the appliance in a location with an
ambient temperature between 60°-90°F. If the ambient temperature is above or below
recommended temperatures, the performance of the unit may be affected.
It is recommended that you do not install the appliance near an oven, radiator or other heating
source. Direct sunlight may affect the acrylic coating and heat sources may increase electrical
consumption. Don’t install in a location where the temperature will fall below 60°F.
Do not store or install the appliance outdoors, in a garage, basement, or in moist areas.
Plug the unit into an exclusive, properly installed-grounded wall outlet.
Do not lift unit by the door handle.
To level your appliance, adjust the front legs at the bottom of the appliance.
The stainless steel handle should be installed according to the following diagram:
17621 South Susana Road, Rancho Dominguez, California 90221
To turn the appliance ON or OFF, touch the
To turn on the internal LED lighting, touch the
button for 5 seconds.
button on the left and/or right side.
Used to raise (warm) the set temperature by 1°C or 1ºF.
Used to lower (cool) the set temperature by 1°C or 1ºF.
ºF/ºC Selector
Select the temperature display setting in Fahrenheit or Celsius degree.
If 2 minutes pass without any keys being selected, the controls will lock automatically. To release the
lock, touch the
and marks at the same time for at least 5 seconds.
The wine cooler has two temperature zones with a temperature range of 40°-72°F. The recommended
temperature setting for each zone is:
• Lower Zone between 40°-72°F
• Upper Zone between 40°72°F
NOTE: The temperature set for the Lower Zone must always be the same or higher than the
temperature set for the Upper Zone. For optimal performance, the set temperature of the two
zones should differ by at least 4°F.
• The temperature will increase by 1°C or 1ºF if you touch UP
once, or the temperature will
decrease by 1°C or 1ºF if you touch DOWN
• To view the set temperature in either zone at any time, touch UP
and the set
temperature will temporarily flash in the LED display for 5 seconds.
NOTE: When using the unit for the first time or after a long period of inactivity, there may be a
variance of a few degrees between the selected temperature and the temperature indicated on the
LED readout. This is normal due to the length of inactivity, and will correct itself after the unit runs for
a few hours. If the unit is unplugged, has lost power or is turned off, wait 3 to 5 minutes before
restarting the unit. The unit will not restart before this time delay.
W W W . V I N O T E M P . C O M
The Dynamic Cooling feature enables the relative humidity inside the unit and the temperature to be
distributed evenly around the interior so you can store all of your wine under the exact same ideal
conditions. If you would like to use the unit to store wine long term, the dynamic cooling is a must.
This will create a continuous climate in the cabinet which imitates that of a wine cellar.
In the Dynamic cooling mode, the interior fan circulates the inside air evenly until the set temperature
is reached. Dynamic Cooling is the factory preset mode. To change to Silent mode, touch and hold
the UP button for approximately five seconds. The wine cooler will beep three times to confirm silent
mode is on. To change back to Dynamic Cooling mode, touch and hold the DOWN button for five
seconds. The wine cooler will beep five times to confirm Dynamic Cooling mode is on.
While bottles may vary in size and dimension, you can store approximately 21 standard Bordeaux 750
ml bottles in the lower zone and 24 8-12oz cans in the upper zone. Please note that bottle capacities
are approximate maximums when storing traditional Bordeaux 750 ML bottles and include bulk
17621 South Susana Road, Rancho Dominguez, California 90221
IMPORTANT: Always unplug the unit before cleaning or performing maintenance. Never use harsh
cleansers or scouring pads to clean any part of the unit.
• Turn off the power, unplug the appliance, and remove all items including shelves.
• Wash the inside surfaces with a warm water and baking soda solution. The solution should be
about 2 tablespoons of baking soda to a quart of water.
• Wash the shelves with a mild detergent solution.
• Wring excess water out of the sponge or cloth before cleaning control panels or any electrical
• Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry
with a clean soft cloth.
• Draw out the water box at the bottom and wash with a mild detergent solution.
• Do not connect or disconnect the electric plug when your hands are wet.
• Never clean appliance parts with flammable fluids. These fumes can create a fire hazard or
• Do not use solvent-based cleaning agents or abrasives on the interior. These cleaners may
damage or discolor the interior.
• The unit defrosts automatically.
• The evaporator behind the rear wall of the unit defrosts automatically. The condensate
collects in the drainage channel behind the rear wall of the unit and flows through the
drainage hole into the drip tray by the compressor where it evaporates.
Most power failures are corrected within a few hours and should not affect the temperature of your
appliance if you minimize the number of times the door is opened. If the power is off for an extended
period of time, proper steps should be taken to protect your contents.
If the unit will not be used for a period of less than three weeks, leave the cooler operating. If the
period of inactivity is several months, remove all items and turn the unit off. Clean and dry the interior
thoroughly. Leave the door open slightly to prevent any possible moisture build-up.
Before moving your cooler, first be sure to remove all items from the cooler.
• Always unplug the cooler before moving.
• Use two or more people to move and install the appliance. Failure to do so can result in back or
other injuries.
• Securely tape down any loose items, such as shelves, inside the unit.
• Turn the adjustable leg up to the base to avoid damage.
• Tape the door shut.
• Ensure that the unit stays securely in the upright position during transportation. Protect the
outside of the appliance with a blanket or similar item.
W W W . V I N O T E M P . C O M
• The unit should be located in the coolest area of the room away from heat sources or direct
• Ensure that the unit has proper allowances on all sides for proper ventilation. Never cover any
air vents.
• Only open the cooler door for as long as necessary. Frequent opening of the door will affect
internal temperature.
17621 South Susana Road, Rancho Dominguez, California 90221
You can solve many common cooler problems easily, saving you the cost of a possible
service call. Try the following suggestions to see if you can solve the problem before
contacting Vinotemp at
Wine Cooler does
not operate
Wine Cooler is not
cold enough
Wine Cooler turns
on and off
Wine Cooler makes
too much noise or
Wine Cooler door
will not close
Wine Cooler light
does not work
Display shows “EL”
or “EH”
Ensure unit is plugged in to electrical outlet.
Check if unit is turned off.
Check for a tripped circuit breaker or blown fuse.
Check the temperature control setting.
External environment or ambient temperature may
require a higher setting.
The door is opened too often.
The door is not closed completely.
The door gasket does not seal properly.
The room temperature is hotter than normal.
The door is opened too often.
The door is not closed completely.
The temperature control is not set correctly.
The door gasket does not seal properly.
Check to ensure the unit is level.
The rattling noise may come from the flow of
refrigerant. This is normal.
As each cycled ends, you may hear gurgling sounds
caused by the flow of refrigerant in the unit. This is
Check to ensure the unit is level.
The gasket is dirty.
The shelves are out of position.
Ensure unit is properly plugged in.
Check for a tripped circuit breaker or a blown fuse.
Check if the light switch is “OFF”.
The air temperature sensor in the corresponding
temperature zone has failed.
W W W . V I N O T E M P . C O M
Vinotemp International (“Seller”) and the person or entity that acquires these goods from Seller (“Purchaser”) hereby fully agree to the following terms and
conditions of the sale: Shipping fees are the responsibility of the Purchaser whether freight prepaid or freight collect. Seller assumes no responsibility for
the goods sold to the Purchaser once the goods have left the Seller’s premises, including, but not limited to, late delivery by the moving carrier, or for
events caused by any difficulty carrier incurs in attempting to fit the goods into the Purchaser’s place of business or residence due to the size of the goods
or otherwise. Purchaser assumes all responsibility for delivery, payment of freight, access, measurement, installation, hook-up, wiring, moving and storage
of the goods. The transportation of all goods is subject to the terms and conditions which the moving carrier imposes on Purchaser including, but not limited
to, additional charges imposed per flight of stairs, and/or additional charges resulting from the carrier’s inability to safely and/or adequately use the building
elevator to lift the goods to an upper floor. Any claim for damages incurred during shipment by the carrier of the goods are insured and handled directly with
the carrier and must be noted at time of delivery. Any damages due to manufacture defects will be handled directly with Vinotemp International, subject to
the limited warranty.
All sales are final, and unless authorized in writing by the Seller, Purchaser may not return the goods, under any circumstance. If Purchaser refuses to
accept the goods, under any circumstance, the Purchaser is liable for the return and cost of freight both ways, and if Seller does take back the goods, there
will be a restocking/service fee that is 35% of the purchase price of the goods. (Product must be in original packaging). Built-to-Order products (including
Cabinets, Racking, and Accessories) are non-returnable. Purchaser must notify Seller of non-conforming goods within four days of delivery, after which
time all goods are deemed accepted. If an order has been placed and production has started, cancellation of your order will be a 15% charge. If Purchaser
tenders payment with a check that has insufficient funds (NSF), or stops payment on a check or credit card for any reason, Purchaser agrees to pay for all
costs associated with the Seller’s collection or litigation of such a claim, including without limitation extra damages, court costs and attorneys’ fees. Finance
charges begin the date of invoice. Collection fees plus NSF fee of $50 will be added to your invoice, which you agree to promptly pay. Title to the goods
does not pass until payment is received in full by Seller and Seller retains a security interest in the goods until they are paid for in full. Statute of limitations
must be handled in arbitration in the County of Los Angeles.
LIMITED WARRANTY: Seller warrants that the goods will be free of defects in materials and workmanship as follows: Furniture style (wood) wine cabinets
made in the U.S.: all cooling unit parts for a period of 5 (five) years; cabinetry and labor (uninstalled) for a period of 12 (twelve) months from date of sale.
For the metal cabinet wine units: parts and labor for cooling system and cabinetry for a period of 12 (twelve) months from date of sale. Thermoelectric
Units: 90 (ninety) days from the date of sale (including Wine Coolers, Beer Dispensers, Humidor, Portofino Wood Cellars, and Refrigerators). Wine-Mate
Split Systems and installed products are parts only for 1 year, no labor. Other Wine-Mate Cooling Systems are 5 years parts, 1 year labor. Wine
Accessories and Racking Systems are not warranted. There is no warranty on parts purchased separately. Removal and re-installation of unit is not
included in warranted labor. Purchaser’s exclusive remedy is limited, at Seller’s option; to repair or replace defective part[s] with either new or factory
reconditioned part[s]. Purchaser is responsible for shipping the unit pre-paid to designated facility and Seller will pay return shipping charges in the
continental United States for items repaired under warranty within 12 (twelve) months from date of sale. Since the natural variation in texture, density, grain,
color, tone and shade of wood is unavoidable; Seller does not guarantee the texture, color, tone or shade of the wood: nor does seller guarantee the
colorfastness of wood or against peeling, chipping, cracking or scratching. Note: Unfinished wood is subject to warping; all wood surfaces must be sealed
before placing cellar into service. Improper placement of the unit will void the warranty. By Vinotemp in writing, any third party repair facility must be preapproved before providing parts free of charge. This limited warranty does not cover damage due to such things as accident, misuse, abuse, mishandling,
neglect, acts of God, fires, earthquakes, floods, high winds, government, war, riot or labor trouble, strikes, lockouts, delay of carrier, unauthorized repair, or
any other cause beyond the control of the Seller, whether similar or dissimilar to the foregoing. Seller is not responsible for any damages caused to
Purchaser's property resulting from the good. This limited warranty applies only inside the Continental US. (Alaska, Puerto Rico and Hawaii are not
For Non-New Units (Scratch & Dent/Refurbished/Floor Models), warranty for compressor units is 90 days from your dated invoice and 30 days for
thermoelectric units (parts for function only, not cosmetic defects). These units are refurbished and sold as is; Purchaser assumes risks to the quality and
performance of goods and assumes the costs of all necessary service or repair not covered herein.
For Element Grills (via Element Products LLC), grills have a 1 year comprehensive parts warranty on entire product. Three years limited parts warranty
covering the stainless burner and a thirty day limited parts warranty on grill accessories. If grill is defective and unused plus all packaging and parts are
intact, we will either replace the grill or provide service to repair the grill. Returned product must accompany all original packaging and parts and is subject
to our 35% restocking fee (and freight both ways). With Wine-Mate products, if the customer calls and the product is “defective”, you must obtain a letter
from your qualified refrigeration technician at the customers cost, to verify that the unit was installed properly, with proper ventilation and the unit is truly
malfunctioning due to manufacture defect.
Purchaser understands and acknowledges that the goods sold here are wine cellars, cigar humidors, and/or other similar units which house wine or cigars.
Purchaser assumes all risk of using these units, including risk of spoilage, humidity variations, temperature variations, leaks, fire, water damage, mold,
mildew, dryness and similar and any other perils that might occur. Seller is not responsible for incidental or consequential damages, and there are no
warranties, expressed or implied, which extend beyond the Limited Warranty described above. Warranty and liability are non-transferable. The implied
warranties of merchantability and of fitness for a particular purpose are hereby expressly disclaimed. Some states do not allow the exclusion of incidental or
consequential damages, or a waiver of the implied warranties of fitness and/or merchantability, so the above limitations may not apply to you. This warranty
gives you specific legal rights and you may also have other rights which vary from state to state. Seller disclaims any indemnification for claims of
infringement of any intellectual property of protectable nature. In the event of any dispute between Seller and Purchaser arising out of or relating to these
terms and conditions or to the goods sold generally, Purchaser must first file a written claim with Seller within ten days of the occurrence giving rise to the
claim and wait an additional thirty days for a response before initiating any legal action. The sale and all terms are subject to California law. Any legal
proceeding arising out of or relating to these terms and conditions or to the goods sold generally shall be brought solely and exclusively in the County of
Los Angeles. In no event may Purchaser initiate any legal proceeding more than six months after the occurrence of the event giving rise to the dispute.
The above terms and conditions are the only ones governing this transaction and Seller makes no oral representations of any kind. These Terms and
Conditions can only be modified in writing, signed by both Purchaser and Seller. 2/13
17621 South Susana Road, Rancho Dominguez, California 90221
Upon receipt and inspection of unit, the supply cord must be replaced if it
is damaged. Contact our customer service at 1-800-777-8466 or
The manufacturer has a policy of continuous improvement on its products
and reserves the right to change materials and specifications without
Please do not place the unit within reach of children.
For adult use only.
Contact with any questions or visit:
17621 S. Susana Road
Rancho Dominguez, CA 90221
Vinotemp is a registered trademark of Vinotemp International. All products, features, and services are subject
to change without notice. We cannot guarantee the accuracy of the contents of this document. We disclaim
liability for errors, omissions, or future changes.
© 2013 Vinotemp International. All rights reserved.
W W W . V I N O T E M P . C O M
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF