Vinotemp | VT-12TSBM | Installation guide | Vinotemp VT-12TSBM Installation guide

Vinotemp VT-12TSBM Installation guide
a pr o u d H e r i tag e o f E x pe r i e n ce a n d Q ua l i t y
17621 South Susana Road
Rancho Dominguez, CA 90221
Phone: 1.800.777.8466
Fax: 1.310.886.3310
info@vinotemp.com
www.vinotemp.com
FREESTANDING
Wine Cooler
Installation Guide
Are you thinking about purchasing a Vinotemp freestanding cooler?
Here are some helpful guidelines, so you know what to expect
once you get your cooler home.
• Exercise caution when moving and installing the unit. The cooler is
heavy and may require two or more people when moving the unit to
prevent strain or injury.
• Ensure that the wine cooler remains in the upright position during
transportation.
• Once you have the cooler in the optimal location, it must rest
UNPLUGGED for a minimum of 24 hours before use.
• To ensure proper ventilation for your appliance, the front of the unit
must be completely unobstructed. Do not place any objects on
top of the cooler.
• Choose a well-ventilated area with temperatures that do not exceed
90°F, away from direct sunlight and sources of heat
(stove, heater, radiator, etc).
• This unit is intended for indoor use only and must be installed in an
area protected from the elements.
• Your cooler will need its own separate, grounded plug that is not
controlled by a switch or pull chain. We do not recommend you use
an extension cord to power your unit.
• You may need to unlock the control panel when first using your
cooler. Instructions on how to unlock the control panel can be
found in each cooler’s Owner’s Manual.
• To protect against electric shock, do not immerse appliance, plug
or cord in water or other liquids.
• For indoor, household use only unless otherwise noted. Any other
use will void the warranty.
• Please note that these general instructions are provided as a guide
and do not take the place of an Owner’s Manual. Your appliance
will arrive with its own Owner’s Manual with more detailed
installation instructions.
VT-12TSMD-2Z
VT-15 TS
VT-21TSP-2Z
17621 South Susana Road
Rancho Dominguez, CA 90221
Phone: 1.800.777.8466
Fax: 1.310.886.3310
info@vinotemp.com
www.vinotemp.com
a pr o u d H e r i tag e o f E x pe r i e n ce a n d Q ua l i t y
˚F/˚C
45
˚F/˚C
˚F
55
Basic Guidelines for Proper
Freestanding Installation:
˚F
• Leave 6 inches of space at the back.
• On both sides, leave10-12 inches of space to ensure
proper air circulation to cool the cooling system.
• There also must be unlimited clearance at the top of
the cooler to ensure proper air circulation.
Example (as shown with VT-12TSMD-2Z):
KEEP TOP CLEARANCE OPEN
BACK
˚F
˚F/˚C
55
˚F
6” min
10” min
10” min
19.75”
19.75”
SIDE
45
15.25”
SIDE
˚F/˚C
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising