U-Line U-1215WCS-00B Quick start guide

U-Line U-1215WCS-00B Quick start guide
QUICK START GUIDE
1000 Series
•
115 V / 60 Hz
QUICK START GUIDE
u-line.com
WELCOME TO U-LINE
Congratulations on your U-Line purchase. Your product comes from a company with over five decades and three generations
of premium modular ice making, refrigeration, and wine preservation experience. U-Line continues to be the American
leader, delivering versatility and flexibility for multiple applications including residential, light commercial, outdoor and marine
use. U-Line’s complete product collection includes modular Wine Captain® Models, Beverage Centers, Clear Ice Machines,
Crescent Ice Makers, Glass & Solid Door Refrigerators, Drawer Models, Freezers, and Combo® Models.
U-Line has captivated those with an appreciation for the finer things with exceptional functionality, style, inspired innovations
and attention to even the smallest details. We are known and respected for our unwavering dedication to product design,
quality and selection. U-Line is headquartered in Milwaukee, Wisconsin with a west coast office located in Laguna Beach,
California and European support in Dublin, Ireland. U-Line has shipped product to five continents for over two decades and is
proud to have the opportunity to ship to you.
PRODUCT INFORMATION
Looking for additional information on your product? User Guides, Quick Reference Guides, CAD Drawings, Compliance
Documentation, and Product Warranty information are all available for reference and download at u-line.com under
Documentation.
PROPERTY DAMAGE / INJURY CONCERNS
In the unlikely event property damage or personal injury is suspected related to a U-Line product, please take the following
steps:
1. U-Line Customer Care must be contacted immediately at +1.800.779.2547.
2. Service or repairs performed on the unit without prior written approval from U-Line is not permitted. If the unit has been
altered or repaired in the field without prior written approval from U-Line, claims will not be eligible.
SERVICE INFORMATION
Answers to Customer Frequently Asked Questions are available at u-line.com under Customer Care or you may contact our
Customer Care group directly, contact information below.
GENERAL INQUIRIES
SERVICE & PARTS ASSISTANCE
U-Line Corporation
Monday - Friday 8:00 am to 5:30 pm CST
8900 N. 55th Street
T: +1.800.779.2547
Milwaukee, Wisconsin 53223 USA
F: +1.414.354.5696
Monday - Friday 8:00 am to 4:30 pm CST
Service Email: [email protected]
T: +1.414.354.0300
Parts Email: [email protected]
F: +1.414.354.7905
Email: [email protected]
u-line.com
CONNECT WITH US
Designed, engineered and assembled in WI, USA
QUICK START GUIDE
Contents
1
Model List
3
Safety and Warning
4
Environmental Requirements
5
Electrical
5
Door Swing
6
General Installation
6
Integrated Panel Installation
8
Control Operation
9
First Use
9
Sabbath Mode
10
Warranty
u-line.com
QUICK START GUIDE
u-line.com
Model List
This guide provides the basics to get you started. Looking for more information? Visit u-line.com to view detailed User Guides
for all U-Line products.
Wine Captain® Models
U-1024WCS-00B
U-1215WCS-00B
U-1224WCS-00B
U-1215WCINT-00B
U-1224WCS-13B
U-1215WCB-00B
U-1224WCINT-00B
U-1224WCINT-60B
U-1224WCB-00B
Beverage Centers
U-1024BEVS-00B
U-1224BEVS-00B
U-1224BEVS-13B
U-1224BEVINT-00B
U-1224BEVINT-60B
Solid Door Refrigerators
U-1215RS-00B
U-1224RS-00B
U-1224DWRS-00B
U-1215RINT-00B
U-1224RINT-00B
U-1224DWRINT-00B
U-1215RB-00B
U-1224RB-00B
U-1224RW-00B
1
QUICK START GUIDE
u-line.com
Refrigerator / Freezers
U-1224RFS-00B
U-1224RFINT-00B
U-1224RFB-00B
U-1224RFW-00B
ADA Height Compliant Series
U-ADA24RGLS-13B
U-ADA24RS-13B
U-29RB-00A
U-ADA24RGLB-13B
U-ADA24RB-13B
U-29RB-13A
U-29RB-15A
U-29RW-00A
U-29RW-13A
U-29RW-15A
Outdoor Series
U-1215RSOD-00B
U-1224RSOD-00B
Visit http://www.u-line.com/product-literature/userguides or
scan this QR code to view all user guides online.
2
QUICK START GUIDE
Safety and Warning
u-line.com
! DANGER
NOTICE
Please read all instructions before installing,
operating, or servicing the appliance.
This unit contains R600a (Isobutane) which is a
flammable hydrocarbon. It is safe for regular
use. Do not use sharp objects to expedite
defrosting. Do not service without consulting the
Use this appliance for its intended purpose only and follow
“R600a specifications” section included in the
these general precautions with those listed throughout this
User Guide. Do not damage the refrigerant
guide:
circuit.
SAFETY ALERT DEFINITIONS
Throughout this guide are safety items labeled with a
! WARNING
Danger, Warning or Caution based on the risk type:
Service must be done by factory authorized
service personnel. Any parts shall be replaced
! DANGER
Danger means that failure to follow this safety
with like components. Failure to comply could
increase the risk of possible ignition due to
incorrect parts or improper service.
statement will result in severe personal injury or
death.
! WARNING
Warning means that failure to follow this safety
statement could result in serious personal injury
or death.
! CAUTION
Caution means that failure to follow this safety
statement may result in minor or moderate
personal injury, property or equipment damage.
3
QUICK START GUIDE
Environmental Requirements
115 V UNITS
u-line.com
OUTDOOR UNITS
This unit is designed to operate between 50°F (10°C) and
100°F (38°C). Higher ambient temperatures may reduce
This model is intended for indoor/interior applications only
the unit’s ability to reach low temperatures and/or reduce
and is not to be used in installations that are open/
ice production on applicable models.
exposed to natural elements.
For best performance, keep the unit out of direct sunlight
This unit is designed to operate between 50°F (10°C) and
and away from heat generating equipment.
100°F (38°C). Higher ambient temperatures may reduce
the unit’s ability to reach low temperatures and/or reduce
ice production on applicable models.
In climates where high humidity and dew points are
present, condensation may appear on outside surfaces.
This is considered normal. The condensation will
For best performance, keep the unit out of direct sunlight
evaporate when the humidity drops.
and away from heat generating equipment.
In climates where high humidity and dew points are
present, condensation may appear on outside surfaces.
! CAUTION
This is considered normal. The condensation will
Damages caused by ambient temperatures of
evaporate when the humidity drops.
40°F (4°C) or below are not covered by the
warranty.
! CAUTION
Damages caused by ambient temperatures of
40°F (4°C) or below are not covered by the
warranty.
4
QUICK START GUIDE
Electrical
! WARNING
u-line.com
Door Swing
Wall
Wall
1/4" Min.
(6 mm)
2-1/8" Min.
(54 mm)
SHOCK HAZARD — Electrical Grounding
Required. Never attempt to repair or perform
maintenance on the unit until the electricity has
been disconnected.
Never remove the round grounding prong from
the plug and never use a two-prong grounding
adapter.
90°
Door Swing
90°
Door Swing
Altering, cutting or removing power cord,
removing power plug, or direct wiring can cause
serious injury, fire, loss of property and/or life,
and will void the warranty.
Never use an extension cord to connect power to
the unit.
Units have a zero clearance for the door to open 90°,
when installed adjacent to cabinets.
Stainless Steel and black and white models require 2-1/8"
(54 mm) door clearance to accommodate the handle if
installed next to a wall.
Always keep your working area dry.
Integrated models require 1/4" (6 mm) clearance if
NOTICE
Electrical installation must observe all state and
installed next to a wall. Allow for additional space for any
knobs or pulls installed on the integrated panel/frame.
local codes. This unit requires connection to a
grounded (three-prong), polarized receptacle
that has been placed by a qualified electrician.
The unit requires a grounded and polarized 115 VAC,
60 Hz, 15A power supply (normal household current). An
individual, properly grounded branch circuit or circuit
breaker is recommended. A GFCI (ground fault circuit
interrupter) is usually not required for fixed location
appliances and is not recommended for your unit because
it could be prone to nuisance tripping. However, be sure
to consult your local codes.
5
QUICK START GUIDE
General Installation
u-line.com
INSTALLATION
1. Plug in the power/electrical cord.
LEVELING INFORMATION
1. Use a level to
2. Gently push the unit into position. Be careful not to
confirm the unit is
entangle the cord.
level. Level should
be placed along top
3. Re-check the leveling, from front to back and side to
edge and side edge
side. Make any necessary adjustments. The unit’s top
as shown.
surface should be approximately 1/8" (3 mm) below
the countertop.
1
4. Remove the interior packing material and wipe out the
inside of the unit with a clean, water-dampened cloth.
2. If the unit is not level, adjust the legs on the corners of
the unit as necessary.
Turn to Adjust
3. Confirm the unit is level after each adjustment and
repeat the previous steps until the unit is level.
INSTALLATION TIP
If the room floor is higher than the floor in the cutout
opening, adjust the rear legs to achieve a total unit rear
height of 1/8" (3 mm) less than the opening’s rear height.
Shorten the unit height in the front by adjusting the front
legs. This allows the unit to be gently tipped into the
opening. Readjust the front legs to level the unit after it is
correctly positioned in the opening.
6
QUICK START GUIDE
u-line.com
Integrated Panel Installation
Due to differences in floor construction or
1. Fully open door/drawer.
flush with the top of the door/drawer.
surrounding cabinetry, the panel may not sit
2. Starting at corner, pull
Panel
gasket away from door/
Door
drawer.
3. Continue to pull gasket
free from gasket channel.
9. Secure integrated
panel to door/drawer
4. Upon removal, lay gasket
Bar
Clamp
using clamps. A
down on a flat surface.
robust tape may also
be used. U-Line
5. Partially loosen the 3 screws, securing the top hinge to
the cabinet.
recommends the use
of bar clamps to
Door/Drawer
secure the panel to
6. Align the panel with the outside edge (opposite the
hinge) and high enough to align with the highest point
in the door/drawer.
the door/drawer. If
using tape, be
Wood
Panel
certain the tape will
not damage panel
finish upon removal.
7. Insert panel underneath top hinge and apply upward
pressure while bringing the lower portion of the panel
flush to the door inside the lower hinge. The panel will
fit snuggly
10.Using a 7/64" (3 mm)
drill bit, drill 6 pilot
Bar
Clamp
holes into the wood
panel 1/2" (12 mm)
8. Align door with cabinet. Tighten the top 3 screws,
securing the top hinge to the cabinet.
deep using the holes in the door/drawer frame as a
guide.
It is important to ensure that all drilled holes are
Align Top Of Panel With Highest Point Of Door/Drawer
Align Panel
Against
Door/Drawe
Edge First
drilled to the correct depth in order to avoid
splits in the wood when hardwood is installed.
11.Locate 6 of the #6x 1-1/4" (32 mm) screws provided
with your unit.
12.Using a Phillips screwdriver, place one screw into each
of the 6 pilot holes and screw down. Do not overtighten
screws.
7
QUICK START GUIDE
u-line.com
13.Be sure the screws force their way past the opening on
the gasket channel and sit flush against the bottom of
the channel.
Integrated Panel
Integrated Panel
14.Remove clamps from door/drawer.
If panel requires additional adjustment after
removing clamps, slightly loosen each screw and
adjust panel as necessary. Tighten screws upon
completion.
15.Starting at the corners, re-install the gasket into the
gasket channel in the frame. Make sure the gasket is
fully seated. This may take some force.
8
QUICK START GUIDE
u-line.com
Control Operation
Up Down
Not
Light Power Used LED
CONTROL FUNCTION GUIDE
FUNCTION
COMMAND
DISPLAY/OPTIONS
ON/OFF
Press
and release
Unit will immediately turn ON or OFF.
Press
and release to leave interior
Toggle lights
Adjust refrigerator set
light on for 3 hours
Press
or
and release
View temperature in unit
Press
and
together and release
Toggle between F/C
Hold
point
and
for 5 seconds
Glass door wine and beverage centers only.
When the “F” or “C” in the display is flashing, press
or
to adjust the set point temperature.
The display will flash and then toggle from set point
to temperature in unit.
The display will change units.
DOOR ALERT NOTIFICATION
When the door is left open for more than 5 minutes:
• An audible tone will sound for several seconds every
minute.
• “dr” will appear in display.
Close door to silence alert and reset.
9
QUICK START GUIDE
u-line.com
First Use
All U-Line controls are preset at the factory. Initial startup
requires no adjustments.
Sabbath Mode
1
NOTICE
2
3
4
5
6
7
U-Line recommends allowing the unit to run
overnight before loading with product.
This unit is Star-K certified and offers a Sabbath mode.
1200 SERIES
Sabbath mode disables system responses to user initiated
When plugged in, the unit will begin operating under the
activities and all external functions, including lighting,
factory default settings. If the unit was turned off during
display and audible alarms. The unit will still maintain
installation, simply press
internal temperatures and set points. View a full list of
and the unit will immediately
switch on. To turn the unit off, press
.
1024BEV
Star-K certified U-Line units at www.star-k.org.
To enable Sabbath Mode:
MECHANICAL DIAL CONTROL
The control dial turns unit ON/OFF and sets temperature.
1. Press
(4) and hold for ten seconds and release (the
This set point temperature is a base setting used by the
°F/°C symbol will flash briefly at the end of the ten
controller to maintain the temperature zone in the unit.
second period).
The factory default MID setting, number 4 set point, is
approximately 38°F (3°C). The set point temperature is a
gauge for further temperature adjustments.
1024WC
MECHANICAL DIAL CONTROL
The control dial turns unit ON/OFF and sets temperature.
2. The interior light and control display (3) will go dark
until user resets mode.
3. NOTE: Although the display will not be visible, the
temperature controls in the unit remain active and
preserve the interior temperature.
This set point temperature is a base setting used by the
controller to maintain the temperature zone in the unit.
The factory default MID setting, number 3 or 4 set point,
is approximately 50°F (10°C). The set point temperature
Sabbath Mode remains active until
(4) is quickly
pressed and released.
is a gauge for further temperature adjustments.
10
QUICK START GUIDE
Warranty
u-line.com
year warranty does not apply to cosmetic damages. A
proof of purchase may be required.
U-LINE CORPORATION LIMITED WARRANTY
1. U-Line Corporation (“U-Line”) warrants each U-Line
product to be free from defects in materials and
workmanship for a period of one year (two years on
Modular 3000 Series) from the date of installation. ULine further warrants the sealed system (consisting of
the compressor, condenser, evaporator, hot gas
bypass valve, dryer, and connecting tube) in each
U-Line product to be free from defects in materials and
workmanship for a period of five years from the date of
installation.
4. The following conditions are excluded from this limited
warranty: use of cleaners other than the recommended
stainless steel cleaners and U-Line Clear Ice Maker
cleaner; installation charges; damages caused by
disasters or acts of God, such as fire, floods, wind, and
lightning; damages incurred or resulting from shipping,
improper installation, unauthorized modification, or
misuse/abuse of the product; customer education
calls; food loss and spoilage; door and water level
adjustments (except during the first 30 days from the
date of installation); defrosting the product; adjusting
2. During the initial one year warranty period (two years
on Modular 3000 Series) for all U-Line products U-Line
the controls; door reversal; and cleaning the
condenser.
shall: (1) repair any product or replace any part of a
product; and (2) for all Marine, RV, and Domestic
U-Line products sold and serviced in the United States
(including Alaska and Hawaii) and Canada, U-Line
shall be responsible for the labor costs performed by a
U-Line authorized service company, incurred in
connection with the replacement of any defective part.
During years two through five of the warranty period
for the sealed system, U-Line shall: (1) at U-Line’s
option repair or replace any part of the sealed system;
and (2) for all Marine, RV, and Domestic U-Line
products sold and serviced in the United States
(including Alaska and Hawaii) and Canada, U-Line shall
be responsible for the labor costs incurred in
connection with the replacement of any defective part
of the sealed system. All other charges, including
transportation charges for replacements under this
warranty and labor costs not specifically covered by
this warranty, shall be the responsibility of the
purchaser. This warranty extends only to the original
purchaser of the U-Line product. The Product
Registration Card included with the product should be
promptly completed by you and mailed back to U-Line,
or you can register on-line at www.u-line.com.
3. The warranty listed above does not apply to floor
display models. The warranty for these models shall
be one-year from the date of installation. This one-
5. U-Line products are designed to operate in ambient
temperatures between 50°F and 100°F unless
otherwise noted in the product manual. Exposure to
temperatures outside this range may cause
degradation of performance and issues, such as lower
ice production or spoiled contents, that are not
covered under the terms of this warranty as a result of
that exposure. U-Line product may not be subjected to
temperatures below 40°F without following the
winterization and vacation shutdown procedures in
your product manual.
6. U-Line’s Outdoor Limited Warranty, set forth in this
Paragraph 6 shall apply to U-Line models deemed
suitable for outdoor use by Underwriters Laboratory
(“UL”) as noted in the U-Line Product Catalog, U-Line’s
website, and/or on the serial tag located inside the
product. Outdoor product may come into contact with
rain by virtue of outdoor use. Exposure to other
sources of water shall also cause this warranty to be
void, including flooding of the area in proximity of the
unit greater than 1/8" deep in water, hurricanes,
splashing of pool water, or directing a spray from a
hose or similar device into and around the unit.
7. If a product defect is discovered during the applicable
warranty period, you must promptly notify U-Line at
11
QUICK START GUIDE
u-line.com
1-800-779-2547 or the dealer from whom you
purchased the product. In no event shall such
notification be received later than 30 days after the
expiration of the applicable warranty period. U-Line
may require that defective parts be returned, at your
expense, to U-Line’s factory in Milwaukee, Wisconsin,
for inspection. Any action by you for breach of
warranty must be commenced within one year after
the applicable warranty period.
8. THIS LIMITED WARRANTY IS IN LIEU OF ANY AND ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR IMPLIED WARRANTY OF
FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH
ARE DISCLAIMED. U-Line’s sole liability, and your
exclusive remedy, under this warranty is set forth in
the paragraphs above. U-Line shall have no liability
whatsoever for any incidental, consequential, or
special damages arising from the sale, use, or
installation of the product or from any other cause
whatsoever, whether based on warranty (express or
implied) or otherwise based on contract, tort, or any
other theory of liability.
9. Some states do not allow limitations on how long an
implied warranty lasts or the exclusion or limitation of
incidental or consequential damages, so the above
limitations may not apply to you. This warranty gives
you specific legal rights, and you may also have other
rights which vary from state to state.
Copyright © 2016 U-Line Corporation. All Rights Reserved.
Publication Number 30440 5/2016 Rev.B
12
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement