Summit | SWC1875B | SWC1535B SWC1875Bmanual.pdf | Summit SWC1875B SWC1535B SWC1875Bmanual.pdf

Summit SWC1875B SWC1535B SWC1875Bmanual.pdf
WINE CELLAR
INSTRUCTION MANUAL
Model Nos.: SWC1535B / SWC1875B
BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS.
Write Serial No. (on lower left corner of
inside cabinet) here:
___________________________________________
Felix Storch, Inc.
770 Garrison Avenue
Bronx, NY 10474
www.summitappliance.com
TABLE OF CONTENTS
Appliance Safety
3
Important Safeguards
3-4
Location of Parts
5
Installation Instructions
Before Using Your Appliance
Installation of Your Appliance
Built-in Cabinet Instructions
Electrical Connection
Extension Cord
Reversing the Door Swing of Your Appliance
Installing the Stainless Steel Handle
Operating Your Appliance
Recommended Temperature Settings
Control Panel for SWC1535B
Control Panel for SWC1875B
Interior Light
Sabbath Mode
Temperature Memory Function
Temperature Alarm / Door Alarm
Door Lock
Wine Shelves
Defrosting
Storage
Care and Maintenance
Cleaning Your Wine Cellar
Power Failure
Vacation Time
Moving Your Appliance
Energy Saving Tips
6-9
6
6
6
6-7
7
7-9
9
9-13
9
9-10
10-11
12
12
12
12
12
12
13
13
14
14
14
14
14
14
Troubleshooting
15-16
Limited Warranty
17
2
APPLIANCE SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read
and obey all safety messages.
This is the Safety Alert Symbol. The symbol alerts you to potential hazards that
can kill or injure you and others. All safety messages will follow the Safety
Alert Symbol and either the words "DANGER" or "WARNING".
Danger means that failure to heed this safety
statement may result in severe personal injury or
death.
Warning means that failure to heed this safety
statement may result in extensive product
damage, serious personal injury, or death.
All safety messages will alert you about the potential hazard, tell you how to reduce the chance of injury,
and let you know what can happen if the instructions are not followed.
IMPORTANT SAFEGUARDS
Before the appliance is used, it must be properly positioned and installed as
described in this manual, so read the manual carefully. To reduce the risk of fire,
electrical shock or injury when using the appliance, follow basic precautions,
including the following:







Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an adapter, and do
not use an extension cord.
Replace all panels before operating.
It is recommended that a separate circuit serving only your appliance be provided. Use receptacles
that cannot be turned off by a switch or pull chain.
Never clean appliance parts with flammable fluids. These fumes can create a fire hazard or explosion.
And do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any
other appliance. The fumes can create a fire hazard or explosion.
Do not connect or disconnect the electric plug when your hands are wet.
Unplug the appliance or disconnect power before cleaning or servicing. Failure to do so can result in
electrical shock or death.
Do not attempt to repair or replace any part of your appliance unless it is specifically recommended in
this manual. All other servicing should be referred to a qualified technician.
3















FOLLOW WARNING CALLOUTS BELOW ONLY WHEN APPLICABLE TO YOUR MODEL
Use two or more people to move and install appliance. Failure to do so can result in back or other
injury.
To ensure proper ventilation for your appliance, the front of the unit must be completely unobstructed.
Choose a well-ventilated area with temperatures above 60°F (16°C) and below 90°F (32°C). This unit
must be installed in an area protected from the elements, such as wind, rain, water spray or drips.
The appliance should not be located next to ovens, grills or other sources of high heat.
The appliance must be installed with all electrical, water and drain connections in accordance with
state and local codes. A standard electrical supply (115 V AC only, 60 Hz), properly grounded in
accordance with the National Electrical Code and local codes and ordinances, is required.
Do not kink or pinch the power supply cord of the appliance.
The size of the fuse (or circuit breaker) should be 15 amperes.
It is important that the appliance be leveled in order to work properly. You may need to make several
adjustments to level it.
All installations must be in accordance with local plumbing code requirements.
Make certain that the pipes are not pinched, kinked or damaged during installation.
Check for leaks after connection.
Never allow children to operate, play with or crawl inside the appliance.
Although the unit has been tested at the factory, due to long-term transit and storage, the first batch
of cubes must be discarded.
Do not use solvent-based cleaning agents or abrasives on the interior. These cleaners may damage
or discolor the interior.
Use this appliance only for its intended purpose as described in this Instruction Manual.
Keep fingers out of the “pinch point” areas. Clearances between the doors and between the doors
and cabinet are necessarily small. Be careful closing doors when children are in the area.
Risk of child entrapment!
Child entrapment and suffocation are not problems of the past. Junked or abandoned appliances are
still dangerous, even if they will “just sit in the garage a few days”.
Before discarding your old refrigerator:
 Take off the doors
 Leave the shelves in place so that children may not easily climb inside.
- SAVE THESE INSTRUCTIONS -
4
LOCATION OF PARTS
MODEL SWC1535B
Digital Control
Panel
Door
Shelves(6)
Handle
Security
Lock
Ventilation
Grille
Adjustable
Legs
Cabinet
MODEL SWC1875B
Digital Control
Panel
Upper Door
Handle
Upper Zone
Security
Lock
Lower Door
Lower Zone
Shelves (14)
Ventilation
Grille
Adjustable
Legs
Cabinet
5
INSTALLATION INSTRUCTIONS
BEFORE USING YOUR APPLIANCE
 Remove the exterior and interior packing.
 Before connecting the appliance to the power source, let it stand upright for approximately 2 hours.
This will reduce the possibility of a malfunction in the cooling system from handling during
transportation.
 Clean the interior surface with lukewarm water using a soft cloth.
 Install the handle on the door. (See page 9.)
INSTALLATION OF YOUR APPLIANCE
 The appliance is designed for built-in, recessed or free-standing installation.
 WARNING: Do not store or install the appliance outdoors.
 CAUTION: This appliance is designed for storing and cooling wines. Do not store perishable food,
medicine or other medical products.
 Place your Wine Cellar on a floor that is strong enough to support it when it is fully loaded. To level the
unit, adjust the front adjustable legs.
 For freestanding installation, 5 inches (127mm) of space between the back and sides of the unit are
suggested, which allows the proper air circulation to cool the compressor and condenser for energy
saving. Even for built-in installation, it is a must to keep 2 to 3 mm of space (about 1/10") on each side
and at the top to ensure proper service access and ventilation. And the air vent at the front of the
appliance must never be covered or blocked in any way.
 NOTE: It is recommended that you do not install the appliance near an oven, radiator or other heating
source. Direct sunlight may affect the acrylic coating and heat sources may increase electrical
consumption. Don’t install in a location where the temperature will fall below 60°F (16°C). For best
performance, do not install the appliance behind a cabinet door or block the base grille.
 Avoid locating the unit in moist areas.
 Plug the Wine Cellar into an exclusive, properly grounded wall outlet. Do not under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power
and/or grounding should be directed toward a certified electrician or an authorized service center.
BUILT-IN CABINET INSTRUCTIONS
This unit is designed for either built-in or free-standing installation. If you plan to use the unit in a built-in
application, use the following dimensions for the enclosure:
Model
Width
Depth
Height
SWC1535B
15” / 38 cm
23¼” / 59 cm
34¼” / 87 cm
SWC1875B
23⅝” / 60 cm
23¼” / 59 cm
69⅞” / 177.5 cm
ELECTRICAL CONNECTION
WARNING
Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is
damaged, have it replaced by a qualified electrician or an authorized service center.
6
This appliance should be properly grounded for your safety. The power cord of this appliance is equipped
with a three-prong plug which mates with standard three-prong wall outlets to minimize the possibility of
electrical shock.
Do not under any circumstances cut or remove the third (ground) prong from the power cord supplied. For
personal safety, this appliance must be properly grounded.
This appliance requires a standard 115/120 Volt AC 60Hz three-prong grounded electrical outlet. Have
the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.
When a standard 2-prong wall outlet is encountered, it is your responsibility and obligation to have it
replaced with a properly grounded 3-prong wall outlet.
To prevent accidental injury, the cord should be secured behind the appliance and not left exposed or
dangling.
The appliance should always be plugged into its own individual electrical outlet which has a voltage rating
that matches the rating label on the appliance. This provides the best performance and also prevents
overloading house wiring circuits that could cause a fire hazard from overheating. Never unplug the
appliance by pulling on the power cord. Always grip the plug firmly and pull straight out from the
receptacle. Repair or replace immediately all power cords that have become frayed or otherwise
damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end.
When moving the appliance, be careful not to damage the power cord.
EXTENSION CORD
Because of potential safety hazards under certain conditions, it is strongly recommended that you do not
use an extension cord with this appliance. However, if you must use an extension cord it is absolutely
necessary that it be a UL/CUL-Listed, 3-wire grounding type appliance extension cord having a grounding
type plug and outlet and that the electrical rating of the cord be 115 volts and at least 10 amperes.
REVERSING THE DOOR SWING OF YOUR APPLIANCE
This unit has the capability of the door opening from either the left or right side. The unit is delivered to
you with the door opening from the left side. Should you desire to reverse the opening direction, please
follow the reversal instructions shown below.
NOTE: All parts removed must be saved to allow the door swing to be reversed.
– Model SWC1535B
7
1. Remove the bottom hinge 2 by unscrewing the four lock screws 1. Be careful to hold the door firmly
after removing the screws. (Fig. 1)
2. Gently pull down to remove the door from the right top hinge and place it on a padded surface to
avoid the risk of damage. Then remove the right top hinge 7. (Fig. 2 & 3)
3. Unscrew and transfer pins 4 and 3 of the hinge plate to the opposite side. (Fig. 1)
4. Pop out the cover caps on the left side of cabinet and use them to cover the screw holes on the right
hand side.
5. Screw the alternative left top hinge 8, included in the fittings, on the left hand side of cabinet. (Fig. 3)
6. Relocate the door to the designated position. Then screw the bottom hinge assembly on the left
designated position and tighten it after the door is leveled. (Fig. 1)
7. Remove the handle from the left side of the door and install it on the right side. (See page 9.)
– Model SWC1875B
1. Remove the door shaft assembly 2 by unscrewing the two lock screws 1. Be careful to hold the lower
glass door firmly after removing the screws. (Fig. 1)
2. Gently pull down to remove the lower glass door from the middle hinge and place it on a padded
surface to avoid the risk of damage. (Fig. 2)
3. Remove the middle hinge 6 by unscrewing the three bolts by the provided hex wrench. Be careful to
hold the glass door firmly after removing the screws. Pull down to remove the upper glass door and
place it on a padded surface to prevent scratching it. Then remove the right top hinge 7. (Fig. 2 & 3)
4. Pop out the cover caps on the left side of cabinet and use them to cover the screw holes on the right
hand side.
8
5. Screw the alternative left top hinge ○
8, included in the fittings, on the left hand side of cabinet. (Fig. 3)
6. Set the upper glass door to the designated position. Then turn around the middle hinge 180° and refit
it on the opposite side by screwing in the three bolts. Level the door by adjusting the three fixing bolts.
And make sure that the spacers which the hinge pins sit on are correctly positioned. (Fig. 3)
7. Set the lower glass door to the designated position and install the two lock screws 1 to connect the
door shaft assembly 2 with the glass door and tighten them before the door is leveled. (Fig. 1)
8. Remove the handles from the left side of the doors and install them on the right side. (See next
section.)
INSTALLING THE STAINLESS STEEL HANDLE
This appliance includes a stainless steel handle that is not required to
operate the unit. To install the handle, follow the instructions below:
Locate the handle 1 over the pins 3 of the door and tighten the handle
by screwing in screws 2 with an Allen wrench.
1
2
3
OPERATING YOUR APPLIANCE
It is recommended you install the appliance in a place where the ambient temperature is between 72º and
78ºF (23º-26ºC). If the ambient temperature is above or below the recommended temperatures, the
performance of the unit may be affected. For example, placing your unit in extreme cold or hot conditions
may cause interior temperatures to fluctuate. The range of 41º-72ºF (5º-22ºC) may not be reached.
RECOMMENDED TEMPERATURE SETTINGS
Conservation
Red Wines
Dry/White Wines
Rosé Wines
Sparkling Wines
49 ~ 57ºF
58 ~ 72ºF
48 ~ 57ºF
49 ~ 51ºF
41 ~ 47ºF
CONTROL PANEL for SWC1535B
9
10 ~ 14ºC
15 ~ 22ºC
9 ~ 14ºC
10 ~ 11ºC
5 ~ 8ºC
ON/OFF Power
symbol and hold for 5 seconds.
To turn the appliance ON or OFF, touch the
NOTE: Pressing the POWER key once can switch off the audible alarm when the alarm is on.
LIGHT
Turn the interior light on and off with this switch.
UP
Used to increase (warm) the set temperature by 1°C/1ºF.
DOWN
Used to decrease (cool) the set temperature by 1°C/1ºF.
Indicator Light
The indicator light is located at the right lower corner of the display. The indicator light will be on
when the multi-key function is selected. To perform the multi-key function, press and hold the first
key, then press the additional key(s) for at least 5 seconds and then release all the keys.
ºF/ºC Selector
Select the temperature display setting in Fahrenheit or Celsius degree. To change the temperature
from Fahrenheit to Celsius or from Celsius to Fahrenheit, press and hold the LIGHT key for 5
seconds.
Setting the Temperature Control
 You can set the temperature by touching the UP and DOWN symbols. When you push the two
buttons at the same time, the LED readout will show the original temperature set previously.
(The temperature preset at the factory is 54°F or 12°C.)
 The temperature you are setting will increase by one degree each time you touch the UP
symbol, and will decrease by one degree each time you touch the DOWN symbol.
 The range of the temperature control is from 41°F to 72°F.
 To view the set temperature at any time, touch the UP or DOWN symbol. The set temperature
will flash in the display window for 5 seconds. After 5 seconds, the temperature inside the unit
will reappear in the display window.
CONTROL PANEL for SWC1875B
ON/OFF Power
symbol and hold for 5 seconds.
To turn the appliance ON or OFF, touch the
NOTE: Pressing the POWER key once can switch off the audible alarm when the alarm is on.
LIGHT
Turn the interior light on and off with this switch.
10
UP
Used to increase (warm) the set temperature by 1°C/1ºF.
DOWN
Used to decrease (cool) the set temperature by 1°C/1ºF.
Indicator Light
The indicator light is located at the right lower corner of the display. The indicator light will be on
when the multi-key function is selected. To perform the multi-key function, press and hold the first
key, then press the additional key(s) for at least 5 seconds and then release all the keys.
ºF/ºC Selector
Select the temperature display setting in Fahrenheit or Celsius degree. To change the temperature
from Fahrenheit to Celsius or from Celsius to Fahrenheit, press and hold the LIGHT key for 5
seconds.
Setting the Temperature Control
 The unit has two separate temperature zones. The temperature of both zones can be set
between 41ºF and 72ºF (5ºC and 22ºC). The LOWER temperature zone is ideal for storing
white and red wine at a setting of 55°F to 72°F (13°C to 22°C). The UPPER temperature zone is
suitable for storing champagne and white wine at a setting of 41°F to 55°F (5°C to 13°C).
 When the unit is plugged in for the first time, the unit will power up automatically to the preset
defaults. The preset temperature at the factory for the UPPER temperature zone is 50ºF (10ºC)
and for the LOWER temperature zone is 60ºF (16ºC).
 You can press the left side UP and DOWN keys to control the internal temperature of the
UPPER temperature zone and press the right side UP and DOWN keys to control the internal
temperature of the LOWER temperature zone. When you press the two keys at the same time,
the display will show the last temperature set previously.
 NOTE: The temperature set for the LOWER temperature zone must always be just as high
as or higher than that in the UPPER temperature zone. For optimal performance, the set
temperature of the two zones should differ by at least 8°F.
 The temperature that you desire to set will increase 1ºC or 1ºF if you press the UP key once, on
the contrary the temperature will decrease 1ºC or 1ºF if you press the DOWN key once. The
display flashes while you make the setting.
 After the temperature has been set, the display shows the current inner temperature of the
particular temperature zone.
 To view the set temperature at any time, press the UP or DOWN key; the set temperature will
temporarily flash in the display for 5 seconds. Then the display shows the current inner
temperature again.
NOTE:
 If the unit is unplugged, or power is lost or turned off, you must wait 3 to 5 minutes before
restarting the unit. If you attempt to restart before this time delay, the unit will not start.

When you use the unit for the first time or restart the unit after it has been shut off for a long
time, there could be a few degrees variance between the temperature you select and the one
indicated on the LED readout. This is normal and is due to the length of the activation time.
There should not be a problem once the unit has been running for a few hours.
11
INTERIOR LIGHT
The interior light makes it easy to view your wine labels and enhances the display of your collection. The
LIGHT switch allows you to toggle between 2 modes of operation for the internal lights: functional
(default) mode and showcase mode. If you are in functional (default) mode, the lights will turn on only
when the door is open. If you are in showcase mode, the lights will be on whether or not the door is open.
SABBATH MODE
Sabbath mode is available for the observance of certain religious holidays. This mode turns off the
displays, interior light and audible alarms and prevents them from turning on again. Normal cooling
operations will still take place.
To initiate Sabbath mode, press the POWER and LIGHT keys at the same time for at least 5 seconds.
The indicator light will flash four times and confirm the Sabbath mode is ON.
Sabbath mode can be exited by repeating the above process. The Sabbath Mode will automatically turn
off after 96 hours.
TEMPERATURE MEMORY FUNCTION
In the event of a power interruption (power surge, breaker switch, etc.), the unit will remember the
previous temperature settings, and when the power is recovered, the cabinet temperature will return to
the same setting as before the power went off.
TEMPERATURE ALARM / DOOR ALARM

The audible alarm sounds if the storage temperature is not cold enough. The temperature display
flashes at the same time.

The cause of the temperature being too high may be:
– Warm fresh food was placed inside
– Too much warm ambient air flowed in when rearranging and removing food
– Power failure for some time
– The appliance is faulty

The audible alarm is automatically silenced and the temperature display stops flashing when the
temperature is sufficiently cold again.

If the door has been left open for more than 60 seconds, the alarm will sound. Pressing the POWER
key once will switch off the audible alarm.
DOOR LOCK
Your unit is provided with a lock and key combination.
The keys are located inside the plastic bag that contains the Instruction Manual. Insert the key into the
lock and turn it counterclockwise to unlock the door. To lock the door, do the reverse operation, making
sure the metal pin is engaged completely. Remove the key and place it in a secure place for safekeeping.
WINE SHELVES
To prevent damaging the door gasket, make sure to have the
door all the way open when pulling the shelves out of the rail
compartment.

For easy access to the stored bottles, you can pull the
12
shelf approximately halfway out of the rail compartment. However this unit was designed with a
plastic post on each side of the shelf track to prevent bottles from falling.

When removing the wooden shelf from the inner rails, make sure to remove all bottles first. Then
move the shelf to the position where the notches in the wooden shelf are exactly aligned with the
plastic posts and lift the wooden shelf. In order to replace the shelf, repeat this procedure in reverse.
DEFROSTING
 The unit defrosts automatically in normal operating conditions.
 The evaporator behind the rear wall of the unit defrosts automatically. The condensate collects in the
drainage channel behind the rear wall of the unit, and flows through the drainage hole into the drip tray
by the compressor where it evaporates.
 However, frost may accumulate on the evaporator if the unit is repeatedly opened in a high heat or high
humidity location. If this frost pattern does not clear within 24 hours, your unit will require manual
defrosting.
STORAGE
Bottles can differ in size. Accordingly, the actual number of bottles you can store may vary.
The approximate maximum bottle capacity can be achieved when storing traditional Bordeaux 750 ml
bottles in bulk storage.
You may load your wine bottles in single rows or by stacking while taking note of the following: if you do
not have enough bottles to fill your wine cellar, it is better to distribute the load throughout the wine cellar
so as to avoid “all on top” or “all below” type loads.
- Do remove or relocate adjustable wooden shelves to accommodate larger type of bottles or increase
the capacity of the cellar by stacking the bottles up when necessary. (See instructions for removing
shelves, above.)
- Keep small gaps between the walls and the bottles to allow air to circulate. As in an underground
cellar, air circulation is important to prevent mold and for a more homogeneous temperature within
the cellar.
- To facilitate air circulation, do not overload your wine cellar.
- Avoid obstructing the internal fans (located inside on the rear panel of the wine cellar).
- To prevent bottles from falling, do not try to slide the shelves outward beyond the fixed position.
- Do not pull out more than one loaded shelf at a time as this may cause the wine cellar to tilt forward
if not properly installed.
13
CARE AND MAINTENANCE
CLEANING YOUR WINE CELLAR
 Turn off the power, unplug the appliance, and remove all items, including shelves.
 Wash the inside surfaces with a solution of warm water and baking soda (about 2 tablespoons of
baking soda to a quart of water).
 Wash the shelves with a mild detergent solution.
 Wring excess water out of the sponge or cloth when cleaning the area where the controls are located,
or any electrical parts.
 Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry with a
clean soft cloth.
 Do not use steel wool or a steel brush on the stainless steel.
CAUTION:
Failure to unplug the appliance during cleaning could result in electrical shock or other personal injury.
POWER FAILURE
Most power failures are corrected within a few hours and should not affect the temperature of your
appliance if you minimize the number of times the door is opened. If the power is going to be off for a
longer period of time, you need to take the proper steps to protect the contents.
VACATION TIME
 Short vacations: Leave the appliance operating during vacations of less than three weeks.
 Long vacations: If the appliance will not be used for several months, remove all items and turn off
the appliance. Clean and dry the interior thoroughly. To prevent odor and mold growth, leave the
door open slightly, blocking it open if necessary.
MOVING YOUR APPLIANCE
1. Remove all items.
2. Securely tape down all loose items (shelves) inside your appliance.
3. Turn the adjustable legs up to the base to avoid damage.
4. Tape the door shut.
5. Be sure the appliance stays secure in the upright position during transportation. Also, protect the
outside of the appliance with a blanket or similar item.
ENERGY SAVING TIPS
 The appliance should be located in the coolest area of the room, away from heat-producing
appliances and out of direct sunlight.
 Ensure that the unit is adequately ventilated. Never cover air vents.
 Do not keep the door open any longer than necessary.
14
TROUBLESHOOTING
You can solve many common problems easily, saving you the cost of a possible service call. Try the
suggestions below to see if you can solve the problem before calling the servicer.
Troubleshooting Guide
PROBLEM
Appliance
does not
operate.
POSSIBLE CAUSE
 Appliance is not connected to a power
supply.
 The appliance is turned off.
 Tripped circuit breaker or a blown fuse.
 The temperature is not set correctly.
 The ambient temperature could require
a lower temperature setting.
 The door was opened too often.
Appliance is
not cold
enough.
 The door was not closed completely.
 Door is not hermetically sealed.
 The condenser is too dirty.
Appliance
turns itself on
and off
frequently.
 The ventilation opening is blocked or too
dusty.
 The room temperature is higher than
average.
 A large amount of bottles has been
added to the unit.
 The door is open too often.
 The door is not closed completely.
 The door gasket does not seal properly.
The light does
not work.
Vibrations
The appliance
seems to
make too
much noise.
The door will
not close
properly.
 Appliance is not connected to a power
supply.
 Tripped circuit breaker or a blown fuse.
 The light was switched off on the control
panel.
 The appliance is not properly level.
REMEDY
 Connect the appliance.
 Switch on the appliance.
 Switch on circuit breaker or replace
fuse.
 Check the set temperature.
 Set a lower temperature.
 Do not open the door more often than
necessary.
 Close door properly.
 Check the door seal and clean or
replace.
 Clean the condenser when necessary.
 Clear the obstructions and clean the
dust.
 Put the appliance in a cooler place.
 Leave the appliance to work for a
while until the set temperature has
been reached.
 Do not open the door more often than
necessary.
 Close door properly.
 Check the door seal and clean or
replace.
 Connect the appliance.
 Switch on circuit breaker or replace
fuse.
 Switch on the light.
 Level the appliance with the
adjustable feet.
The rattling noise may come from the flow of the refrigerant, which is normal. As each
cycle ends, you may hear gurgling sounds caused by the flow of refrigerant in your
appliance.
If temperature fluctuations occur, the contraction and expansion of the inner walls may
cause popping and cracking noises.
 The appliance is not properly level.
 Level the appliance with the
adjustable feet.
 The appliance is not properly level.
 Level the appliance with the
adjustable feet.
 The door was reversed and not properly  Check the door hinge and reassemble
installed.
correctly.
15
Display “E1” or
“E2”.
The alarm
sounds and
the
temperature
display
flashes.
The icon “--” is
lit up and
flashing in the
temperature
display.
 The gasket is dirty.
 The shelves are out of position.
 The air temperature sensor has failed.
 Clean the door gasket.
 Check the shelves and refit correctly.
 Call for service.
Has the appliance door been open for
longer than 60 seconds? If not, then the
temperature has risen higher or fallen
lower than the temperature that has been
set. This could be due to:
 The appliance door being opened too
often.
 The ventilation opening being covered
or too dusty.
 A lengthy interruption to the power
supply.
 A large amount of bottles has been
added to the unit.
 The display temperature is out of range.
If yes, close the door.
16
 Do not open the door more often than
necessary.
 Clear the obstructions and remove the
dust.
 Leave the appliance to work for a
while until the set temperature has
been reached.
 Only temperatures within the range
0~99°F/-9~37°C can be displayed. If
the temperature is not within this
range, the icon “--” will be displayed
instead. This is normal.
LIMITED WARRANTY
ONE-YEAR LIMITED WARRANTY
Within the 48 contiguous United States, for one year from the date of purchase, when this appliance is
operated and maintained according to instructions attached to or furnished with the product, warrantor will
pay for factory-specified parts and repair labor to correct defects in materials or workmanship. Service
must be provided by a designated service company. Outside the 48 states, all parts are warranted for
one year from manufacturing defects. Plastic parts, shelves and cabinets are warranted to be
manufactured to commercially acceptable standards, and are not covered from damage during handling
or breakage.
5-YEAR COMPRESSOR WARRANTY
1. The compressor is covered for 5 years.
2. Replacement does not include labor.
ITEMS WARRANTOR WILL NOT PAY FOR:
1. Service calls to correct the installation of your appliance, to instruct you how to use your appliance, to
replace or repair fuses or to correct wiring or plumbing.
2. Service calls to repair or replace appliance light bulbs or broken shelves. Consumable parts (such as
filters) are excluded from warranty coverage.
3. Damage resulting from accident, alteration, misuse, abuse, fire, flood, acts of God, improper
installation, installation not in accordance with electrical or plumbing codes, or use of products not
approved by warrantor.
4. Replacement parts or repair labor costs for units operated outside the United States.
5. Repairs to parts or systems resulting from unauthorized modifications made to the appliance.
6. Expenses for travel and transportation for product service in remote locations.
7. The removal and reinstallation of your appliance if it is installed in an inaccessible location or is not
installed in accordance with published installation instructions.
DISCLAIMER OF IMPLIED WARRANTIES;
LIMITATION OF REMEDIES
CUSTOMER'S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE
PRODUCT REPAIR AS PROVIDED HEREIN. IMPLIED WARRANTIES, INCLUDING WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR.
WARRANTOR SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME
STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS, SO THESE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO
YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER
RIGHTS, WHICH VARY FROM STATE TO STATE.
FELIX STORCH, INC.
770 Garrison Avenue
Bronx, NY 10474
Phone: (718) 893-3900
Fax: (718) 842-3093
www.summitappliance.com
For parts and accessory ordering,
troubleshooting and helpful hints, visit:
www.summitappliance.com/support
Printed in China
17
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising