Whynter | BWR-331SL | User manual | Whynter BWR-331SL User Manual

Whynter BWR-331SL User Manual
Whynter Elite 33 Bottle Seamless Stainless Steel Door Single
Zone Built-in Wine Refrigerator
Model # : BWR-331SL
INSTRUCTION MANUAL
Congratulations on your new Whynter product. To ensure proper operation, please read this Instruction Manual carefully before
using this product. Keep this manual in a safe place for future reference.
Table of Contents
PAGE
Safety Precautions
3-4
Parts
5
Product Features
6
Installation
7-9
Operation and Controls
10 - 12
Storage
13
Care and Maintenance
14
Troubleshooting
15 - 16
Warranty Information
17
2
Safety Precautions
APPLIANCE SAFETY
Your safety and the safety of others are very important to us.
To reduce the risk of fire, electrical shock, or injury when using your appliance, follow
these basic precautions
This is the Safety Alert Symbol. This symbol alerts you to potential hazards that may
result in serious injury. All safety messages will follow the Safety Alert Symbol and
either the words” DANGER” or “WARNING”.
Danger means that failure to heed this safety
statement may result in severe injury or death.
Warning means that failure to heed this safety
statement may result in extensive product damage, serious injury, or death.
Caution means that failure to heed this safety
statement may result in minor or moderate injury,
or property or equipment damage.
All safety messages will alert you to know what the potential hazard is, tell you how to reduce the
chance of injury, and let you know what can happen if the instructions are not followed.
IMPORTANT SAFEGUIDES
Before the appliance is used, it must be properly positioned and installed as described in this manual, please read the manual carefully. To reduce the risk of fire,
electrical shock or injury when using the appliance, follow basic precaution, including
the following:
 Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an adapter, and do
not use an extension cord.
 Do not use if the power supply cord is damaged. If damaged, it must be replaced by a qualified electrician.
 It is recommended that a separate circuit, serving only your appliance be provided. Use receptacles
that cannot be turned off by a switch or pull chain.
 Never clean appliance parts with flammable fluids or harsh chemicals. These fumes can create a fire
hazard or explosion.
 Do not store or use gasoline or other flammable vapors and liquids in the vicinity of the appliance or
any other appliance.
 Before proceeding with cleaning and maintenance operations, make sure to unplug the appliance.
 Do not connect or disconnect the electric plug with wet hands.
 Do not attempt to repair or replace any part of your appliance unless it is specifically recommended in
this manual. All other servicing should be referred to a qualified technician.
3
Safety Precautions

This appliance is CFC- and HFC-free and contains small quantities of Isobutane (R600a) which is environmentally friendly, but flammable. It does not damage the ozone layer, nor does it increase the greenhouse
effect. Care must be taken during transportation and setting up of the appliance that no parts of the cooling
system are damaged. Leaking coolant can ignite and may damage the eyes.
In the event of leakage:





















-
Avoid open flames and anything which creates a spark
-
Disconnect from the mains
-
Air the room in which the appliance is located for several minutes and contact the Service Department
for advice
Use two or more people to move and install the appliance. Failure to do so can result in injury.
To ensure proper ventilation for your appliance, the front of the appliance must be completely unobstructed. Choose a well-ventilated area with temperatures above 60°F (16°C) and below 90°F (32°C). This appliance must be installed in an area protected from the element, such as wind, rain, water spray or drips.
The appliance should not be located next to ovens, grills or other sources of high heat.
The appliance must be installed with all electrical connections in accordance with state and local codes.
The fuse (or circuit breaker) size should be 15 amperes.
It is important for the appliance to be leveled in order to work properly. For a stable installation, make sure
the appliance is placed on a flat, level and solid surface.
Ensure that the surface on which the appliance is placed is strong enough to hold the appliance and the
items stored inside.
This appliance is not intended for use by young children or physically-challenged persons without supervision/assistance. Young children must be supervised to ensure safety around this or any appliance.
Do not use solvent-based cleaning agents of abrasives on the interior. These cleaners may damage or
discolor the interior.
Keep fingers out of the “pinch point” areas. Clearance between the doors and between the doors and
cabinet are necessarily small. Be careful closing doors when children are in the area.
This wine refrigerator is designed to store wine bottles. If food is stored inside, ensure that there is sufficient airflow between items. Please note that the temperature range for this wine refrigerator is optimized
for wine and beverage storage. Perishable food items may require a different storage environment.
Do not place hot food or beverages into the appliance.
Close the wine refrigerator door immediately after putting in any items to keep the internal temperature
relatively constant.
Avoid placing any objects on top of the appliance.
This is an electrical appliance, to avoid injury from electrical shock do not operate the unit with wet hands,
while standing on a wet surface or while standing in water. Do not use outdoors or in wet conditions.
When positioning or moving the appliance, ensure that it is not turned up side down or unleveled greater
than 45°
Never pull the power cord to disconnect it from the outlet. Grasp the plug and pull it from the outlet.
Never lift, carry or drag the appliance by the power cord.
This appliance is designed for household, non-commercial use only. Any other use will void the warranty.
Do not plug into the power outlet before set up is completed.
Do not move this appliance without emptying it and securing the door in a closed position.
4
Parts
1
5
2
6
7
3
4
8
9
1. Control Panel
5. LED Interior Light
2. Shelves (6)
6. Door Handle
3. Cabinet
7. Door
4. Leveling Legs (4)
8. Bottom Grille
9. Drip Tray
5
Product Features
Store your finest bottles of wine in the stylish and functional Whynter Elite 33 Bottle Seamless Stainless
Steel Door Single Zone Built-in Wine Refrigerator. The Whynter BWR-331SL wine refrigerator can store approximately 33 bottles, adjustable using the touch controls and a digital temperature display. Using premium
materials and techniques to achieve a seamless door frame, this wine storage unit sets its appearance apart
from your conventional product.
With an all-black cabinet, seamless stainless steel double-paned glass door, and sliding shelves, this wine
refrigerator is as alluring as it is dependable. The seamless glass door and soft interior lighting turn your
wine collection into a breathtaking display. With its front ventilation design, this unit is intended for built-in
installation or simply as a free-standing unit.











Capacity: 33 standard 750ml wine bottle
Stainless seamless steel glass door with sleek black cabinet
Luxurious curved handlebar
Tempered double-pane gray-smoked glass for enhanced UV protection
Adjustable thermostat
Soft white LED Interior Light with Function mode and Showcase mode
Powerful fan-circulated compressor cooling
Reversible door swing
Fahrenheit and Celsius degree optional temperature indicators
6 removable pull-out sliding shelves
Environmentally friendly refrigerant
TECHNICAL DATA
MODEL :
BWR-331SL
Capacity
33 standard wine bottles
Voltage
115V/60Hz
Current
1.0A
Input Power
100W
Power Consumption
1.05 kWh/24h
Temperature Control Range
40ºF-66ºF / 4ºC-19ºC
Net Weight
80 lbs
Gross Weight
84 lbs
Unit Dimensions
35”H x 15"W x 22.5"D (Add 1.5" in depth with
handle installed)
Packaging Dimensions
39”H x 17"W x 25"D
Refrigerant
R134A
6
Installation
IMPORTANT SAFETY INSTRUCTIONS
WARNING

To reduce the risk of fire, electrical shock, or injury
when using your appliance, follow these basic pre-
Read all instructions before using the appliance.
 DANGER or WARNING: An empty wine refrigerator can be a hazardous for children or small
pets. If disposing of the wine refrigerator, remove gasket seals, latches, lids or the entire door from
your unused appliance, or take other action to ensure the wine refrigerator is harmless.

Never allow children to operate, play with, or crawl inside the appliance.

Never clean appliance parts with flammable fluids or harsh chemicals. The fumes can create a fire hazard or
explosion.

Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any other appliance. The fumes can create a fire hazard or explosion.
INSTALLATION INSTRUCTIONS
BEFORE USING YOUR APPLIANCE

Remove the exterior and interior packing.

Before connecting the appliance to the power source, let it stand upright for approximately 4 hours. This will
reduce the possibility of a malfunction in the cooling system from handling during transportation.

Clean the interior surface with lukewarm water using a soft cloth.

Install the handle on the door.
INSTALLATION OF YOUR APPLIANCE

The appliance is designed for built-in, recessed or free standing installation.

WARNING: Do not store or install the appliance outdoors.

CAUTION: This appliance is designed for storing and cooling wines. Do not store perishable food, medicine or
other medical products.

Place your appliance on a hard and level floor that is strong enough to support it when it is fully loaded.

We do not recommend installing the appliance on carpet.

To level your appliance, adjust the leveling legs at the bottom of the appliance if needed.

For free standing installation, 5 inches (127mm) of space between the back and sides of the appliance are
suggested, which allows the proper air circulation to cool the compressor and condenser. Even for built-in installation, it is a must to keep a ¼” (6.35mm) space on each side and at the top. And the air vent at the front of
the appliance must never be covered or blocked in any way.

NOTE: Do NOT install the appliance near an oven or other heating source. Direct sunlight may affect the
acrylic coating and heat sources may increase electrical consumption. For best performance, do not install the
appliance behind a cabinet door or block the base grille.

Avoid locating the appliance in area that may be exposed to excessive moisture.

Plug in the appliance into an exclusive, grounded wall power outlet. Do not under any circumstances cut or
remove the third (ground) prong from the power cord. Any questions concerning power and/or grounding
should be directed toward a qualified electrician or an authorized service center.
7
Installation
BUILT-IN CABINET INSTRUCTIONS
These appliances are designed for both built-in or free standing installation. For built-in installation, ensure
proper service access and ventilation, allow at least ¼” space on each side and at the top.
CABINET OPENING DIMENSIONS (minimum)
Width
15”
Depth
23¼”
Height
34¼”
ELECTRICAL CONNECTION
WARNING: Improper use of the grounded plug can result in the risk of electrical shock. If the power
cord is damaged, have it replaced by a qualified electrician or contact Whynter Service Department
This appliance requires a standard 115/120 Volt AC ~/60Hz electrical ground outlet with three-prong. Have
the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded. The
cord should be secured behind the appliance and not left exposed or dangling to prevent accidental injury.
The appliance should always be plugged into its own individual electrical outlet which has a voltage rating
that matches the rating label on the appliance. This provides the best performance and also prevent overloading house wiring circuits that could cause a fire hazard from overheated. Never unplug the appliance by
pulling the power cord. Always grip the plug firmly and pull straight out from the receptacle. Repair or replace
immediately all power cords that have become frayed or otherwise damaged. Do not use a cord that shows
cracks or abrasion damage along its length or at either end. When moving the appliance, be careful not to
damage the power cord.
EXTENSION CORD
Because of potential safety hazards, it is strongly recommended that you do not use an extension cord with
this appliance. However, if you must use an extension cord, it is absolutely necessary that it be a UL/CULListed, 3-wire grounding type appliance extension cord having a grounding type plug and outlet and that the
electrical rating of the cord be 115 volts and at least 10 amperes.
INSTALLING STAINLESS STEEL HANDLES
This appliance includes stainless steel handles that are not
required to operate this appliance. To install the handles
please follow the below instructions:
1. The gaskets are easily displaced by hand, no tools are
necessary.
2. Use a flat-head screwdriver to remove the two preinstalled decorative plugs from the back of doors. Some wine
refrigerators have no decorative plugs.
3. Install the handles tightly as shown with two screws, lock
washers and flat washers provided. (DO NOT over tighten as
this will cause damage to the handles and stainless steel
door frames).
4. Replace the door gaskets to its original position.
8
Installation
REVERSING THE DOOR SWING OF YOUR WINE REFRIGERATOR
Note: All parts removed must be saved for proper reinstallation of the door.
This appliance has the capability of the door opening from either the left or right side. The appliance is delivered to you with the door opening from the left side. Should you desire to reverse the opening direction,
please follow the following reversal instructions.
1. Remove the front ventilation grille (2) and the adjustable ventilation grille (1) by unscrewing the screws
(3) & (4). (Figure 1)
2. Remove the bottom hinge plate (5) by unscrewing the four lock screws (6). Be careful to hold the glass
door firmly after removing the screws. (Figure 2)
3. Gently pull down to remove the glass door from the right top hinge and place it on a padded surface to
avoid the risk of damage, then remove the right top hinge (7). (Figures 3 & 4)
4. Unscrew and transfer the hinge pin of the bottom hinge plate (5) to the opposite side.
5. Pop out the cover caps on the upper left side corner of the inside cabinet and use them to cover the
screw holes on the right hand side.
6. Screw the alternative left top hinge (9), included in the fittings, on the left hand side of cabinet. (Figure 4)
7. Rotate the door 180° and then relocate the door to the designated position. Then screw the bottom hinge
assembly on the left designated position and tighten it after the door is leveled. (Figure 2)
8. Reassemble the ventilation grilles.
9
Operation and Controls
It is recommended you install the appliance in a place where the ambient temperature is between 72º- 78ºF /
23º-26ºC. If the ambient temperature is above or below recommended temperatures, the performance of the
wine refrigerator may be affected. For example, placing your appliance in extreme cold or hot conditions may
cause interior temperatures to fluctuate.
NOTE:

When using the wine refrigerator for the first time or restarting after being shut off for a long period of time,
there may be a few degree variance between the set temperature and the LED readout. This is normal
due the length of activation time. The unit should return to normal after running for a few hours. This unit
will not raise its internal temperature if the ambient temperature where the unit is located is lower than the
set temperature.
RECOMMENDED TEMPERATURE SETTINGS
Conservation
49 - 57ºF
10 - 14ºC
Red Wines
58 - 72ºF
15 - 22ºC
Dry/White Wines
48 - 57ºF
9 - 14ºC
Rose Wines
49 - 51ºF
10 - 11ºC
Sparkling Wines
40 - 47ºF
5 - 8ºC
CONTROL PANEL GUIDE

POWER
To turn the appliance on/off, press and hold the power key for 5 seconds.

UP
To increase (warm) the set temperature by 1°C or 1ºF.

DOWN
To decrease (cool) the set temperature by 1°C or 1ºF.

LIGHT
Used to turn the internal light on/off.
ºF/ºC SELECTOR
Select the temperature display setting in Fahrenheit or Celsius degree. To change the temperature from
Fahrenheit to Celsius or from Celsius to Fahrenheit, press and hold the LIGHT key for 5 seconds.
10
Operation and Controls
NOTE: If the appliance is unplugged, encounter power interruption, or turned off, you must wait 3 -5
minutes before restarting the appliance. If attempted to restart before this time delay, the appliance may not start.
SETTING THE TEMPERATURE CONTROL

During normal operation, the temperature display on the control panel shows the temperature inside the appliance.

When the unit is plugged in for the first time, the unit will power up automatically to the preset defaults. The
preset temperature is 54ºF (12ºC).

You can press the UP and DOWN keys to control the internal temperature of the appliance.

The temperature that you desire to set will increase 1ºC or 1ºF if you press the UP key once and will decrease
1ºC or 1ºF if you press the DOWN key once. The display flashes while you make the setting.

After the temperature has been set, the display will flash four times before it shows the current internal temperature of the particular temperature zone.

To view the set temperature at any time, press the UP or DOWN key, the set temperature will temporarily flash
in the display for 5 seconds. Then the display shows the current internal temperature again.
TEMPERATURE MEMORY FUNCTION
In the event of a power interruption (power surge, breaker switch, etc.), the unit can remember the previous temperature settings. When the power has restored, the temperature display will show the current cabinet temperature.
INTERIOR LIGHT
The interior light makes it easy to view your wine labels and enhances the display of your collection. Pressing the
LIGHT key toggles between 2 modes of operation for the internal lights: Functional (default) mode and Showcase
mode. If you are in functional (default) mode, the lights will turn on only when the door is open. If you are in Showcase mode, the lights will be on whether or not the door is open.
CABINET SHELVES
NOTE: Do not cover any part of the shelves with aluminum foil or any other material that will prevent adequate air
circulation within the cabinet.
This appliance is equipped with removable shelves. To prevent damage to the door gasket, make sure the door is
opened completely before pulling the shelves out.

For easy access of the wine bottles, you must pull the shelves approximately ⅓ out of the railing.

The shelves are designed with an emergency stop to prevent them being removed too far when loaded.

When removing the shelves out of the railing, make sure to remove all items first.

To remove the shelves, pull the shelf forward until the notch aligns with the plastic post. Lift the shelf and continue to pull the shelf forward until it is completely removed from the internal compartment.
NORMAL SOUNDS
The unit is cooled by a compressor. The compressor pumps coolant through the cooling system, producing operating noise. Even when the compressor cuts out, noises caused by changes in temperature and pressure are unavoidable. Operating noise will be most audible immediately after the compressor comes on. It becomes quieter as
the operating period continues.
The following noises are normal and occur from time to time:

Gurgling sound, caused by the refrigerant flowing through the appliance’s coils,

Humming noise made by the compressor. This noise can get louder for brief periods when the motor is switching on.

Cracking/popping sounds, resulting from the materials contraction and expansion due to temperature variations,

Fan operating sound, to circulate the air within the wine cabinet.

Unusual noise is normally the result of improper installation.

Where the unit is installed in open-plan kitchen or in partition walls, the level of operating noise will be heard
more acutely. However, this is due to the surrounding architecture and not to the unit.
11
Operation and Controls
NOTE: An individual’s perception of noise is directly linked to the environment in which the unit is located, as well the specific type of models. Our appliances are in line with international standards for such appliance and in line with the latest technical developments. Please remember that the noise of the compressor
and the coolant circulating in the system is unavoidable.
DEFROSTING AND VENTILATION
Your wine refrigerator is designed with an automatic defrost system. During off-cycle, the evaporator behind
the rear wall of the unit defrosts automatically. Condensation is collected in the drain at the back of the unit
and flows through the drainage hole into the drip tray above the compressor. The heat is transferred from
compressor and evaporates any condensation that has collected in the drip tray. Part of the remaining water
within the wine refrigerator is collected for humidity purposes.
NOTE: Frost may accumulate on the evaporator if the unit is repeatedly opened in a high heat or high
humidity location. If this frost pattern does not clear within 24 hours, your unit will require manual defrosting.
STORAGE
1
3
2
1
5
4
2
3
12
Storage
Wine bottles may differ in size and dimensions so the actual number of bottles can be stored may vary. The 33
bottle capacity is the approximate maximum\ when storing traditional Bordeaux 750 ML bottles and includes
bulk storage.
You may load your wine bottles in single row or by stacking while taking note of the following: if you do not have
enough bottles to fill your wine refrigerator, it is better to distribute the load throughout the wine refrigerator so
as to avoid “all on top” or “all below” type loads.

You can remove or relocate adjustable shelves to accommodate larger type of bottles (see removing
shelves)

Keep small gaps between the walls and the bottles to allow air circulation.

Do not over load your wine refrigerator

Avoid obstructing the internal fans (located inside on the back panel of the wine refrigerator).

Do not try to slide the shelves outwards beyond the fixed position to prevent the bottles from falling.

Do not pull out more than one loaded shelf at a time as this may cause the wine refrigerator to tilt forward if
not properly installed.
REMOVING SHELVES
 To remove any of the shelves from the rail compartment, move the shelf to the position where the notch of
shelf is exactly under the plastic post and then lift it up and out.
 In order to replace the shelf, repeat steps described above in reverse. And make sure to engage the
shelves with the small pegs of the extended rails when the model is equipped with roller system.
13
Care and Maintenance
CAUTION: Failure to unplug the appliance during service could result in electrical shock or
personal injury.
CLEANING YOUR APPLIANCE
 Turn off the power, unplug the appliance, and remove all items including shelves.
 Wipe the interior with a warm water and baking soda solution. The solution should be about 2 tablespoons of
baking soda to one quart of water.
 Wipe the shelves with a mild detergent solution.
 Wipe the outside cabinet with warm water and mild liquid detergent.
 Do not use steel wool or steel brush on the stainless steel. These will erode the stainless steel and rusting
may occur.
CAUTION: Failure to unplug the appliance could result in electric shock or personal injury
PREMISES POWER FAILURE

In the event of a power interruption, all previous temperature settings are automatically memorized. If power
is interrupted (power surge, breaker switch, etc.) and then powered up again, the unit will operate with the
last temperature set-point.

Most power failures are corrected within a few hours and should not affect the temperature of your appliance
if you minimize the number of times the door is opened. If the power is going to be off for a longer period of
time, you need to take the proper steps to protect your contents.
VACATION TIME

Short vacations: Leave the appliance operating during vacations of less than two days

Long vacations: If the appliance will not be used for an extended period, remove all items and turn off the
appliance. Clean and dry the interior thoroughly.
MOVING YOUR APPLIANCE

Remove all items inside the appliance.

Securely tape down (we recommend using painter’s tape) all loose items (shelves) inside your appliance.

Turn the adjustable leg up to the base to avoid damage.

Tape (we recommend using painter’s tape) the door shut.

Be sure the appliance stays secure in the upright position during transportation and protect the exterior of
appliance with a blanket, or similar item.
ENERGY SAVING TIPS

The appliance should be located in the coolest area of the room, away from heat producing appliances, and
out of any direct sunlight.

Ensure that the appliance is adequately ventilated. Never obstruct the air vents.

Close the door tightly and do not open the appliance too frequently or for a long period of time.

Store the content in an organized way

Do not over-fill the appliance to allow air to circulate
14
Troubleshooting
Problem
The appliance does not operate
The appliance is not cold
enough
Possible Causes



There is a power failure
The appliance is not plugged in
A house fuse has blown or the
circuit breaker is tripped



The set temperature too high
The appliance is placed too close
to a heat source
The door is opened too often
The door is not closed completely
The door gasket does not seal
properly
The front bottom grille does not
have sufficient ventilation






The appliance turns itself on
and off frequently





The appliance makes too
much noise
Solutions






Decrease or increase the ambient
(room) temperature
To minimize internal temperature fluctuation, do not add large amount of
contents at once
Close the door tightly and do not open
the door too frequently or for a long
period of time
Ensure the door gasket is not loose
The noise may come from the

flow of the refrigerant and expansion of the inside walls may cause
popping and crackling noises
Contraction and expansion of the
inside walls may cause popping
and crackling noises

The appliance is not level
It is normal that as each cooling cycle
ends, you may hear rattling or gurgling
sounds caused by the flow of refrigerant in the appliance. The high efficiency compressor may make a pulsating
or high pitched sound
Some popping or cracking noises are
normal. They are caused by expansion
and contraction of the inside walls due
to temperature changes
Make sure the unit is on a hard and
level surface. Do not place the appliance on carpet
See Operating Noises




Adjust the set temperature
Keep the appliance away from sunshine or other heat sources
Close the door tightly and do not open
the door too frequently or for a long
period of time
Ensure the door gasket is not loose.
The front bottom grille must be completely unobstructed
The ambient (room) temperature 
is too low or high

A large amount of contents has
been added to the appliance
The door is opened too often
The door is not closed completely 
The door gasket does not seal
properly


The door does not close
properly
Ensure the appliance is plugged in and
the power outlet has power
Replace the broken fuse or reset the
breaker
The appliance is not level
The door was reversed and not
properly installed
The shelves are out of position
15


Make sure the wine refrigerator is on a
hard and level surface. Avoid placing
the appliance on a carpeted or soft
surface
Correctly install the shelves
Troubleshooting
Problem
Possible Causes
Solutions
Display flashing

Set temperature has not been
reached
Display “E0”, “E1”. “E2”,
“E3”, “E4”, “E5” or “E7”

“E0” indicates the communication

error
“E1” or “E2” indicates that the air
temperature sensor is failed
“E3” or “E4” indicates that the defrost sensor in the evaporator is
failed
E5” indicates the defrost heater failure
E7” indicates the door switch failure




The icon “--” is lit up and
flashing in the temperature
display

The display temperature is out of
the range
16


It is normal for the display to flash until
the unit reaches the set temperature.
Please note that the unit may take unto
24 hours to reach the set temperature
if the cabinet is full.
Call for service
Only temperatures within the range
16~99°F/-9~37°C the appliance can
display will be shown. If the temperature is not within this range, the icon “-” will be displayed instead. That is normal.
ONE YEAR LIMITED WARRANTY
This WHYNTER Built-in Wine Refrigerator is warranted, to the original owner within the 48
continental states, for one year from the date of purchase against defects in material and
workmanship under normal use and service. Should your WHYNTER wine refrigerator prove
defective within one year from the date of purchase, return the defective part or unit, freight
prepaid (within two months of purchase; after two months to one year, customer will be responsible for freight cost to Whynter’s service department), along with an explanation of the
claim to Whynter LLC. Please package the wine refrigerator carefully in its original packaging
material to avoid damage in transit. Please retain the original box and packaging material.
Under this warranty, Whynter will repair or replace any parts found defective. This warranty is
not transferable. After the expiration of the warranty, the cost of labor and parts will be the
responsibility of the original owner of the unit.
THIS WARRANTY DOES NOT COVER:
 Acts of God, such as fire, flood, hurricanes, earthquakes and torna-
does.
 Damage, accidental or otherwise, to the wine refrigerator while in the
possession of a consumer not caused by a defect in material or
workmanship;
 Damage caused by consumer misuse, tampering, or failure to follow
the care and special handling provisions in the instructions.
 Damage to the finish of the case, or other appearance parts caused
by wear.
 Damage caused by repairs or alterations to the product by anyone
other than authorized by the manufacturer.
 Freight and Insurance cost for the warranty service.
DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES
CUSTOMER'S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR OR
REPLACEMENT AS PROVIDED HEREIN. CLAIMS BASED ON IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD
ALLOWED BY LAW, BUT NOT LESS THAN ONE YEAR. WHYNTER SHALL NOT BE LIABLE FOR CONSEQUENTIAL OR
INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND INCIDENTAL EXPENSES RESULTING FROM ANY BREACH
OF THIS WRITTEN LIMITED WARRANTY OR ANY IMPLIED WARRANTY. SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSE- QUENTIAL DAMAGES, OR LIMITATIONS ON THE
DURATION OF IMPLIED WARRANTIES, SO THESE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WRITTEN WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM
STATE TO STATE.
Please retain the original proof of purchase in order to obtain warranty services.
Warranty begins from the original date of purchase.
To obtain service or information, contact
Whynter LLC via email at service@whynter.com or call
866-WHYNTER.
Product contents and specifications may change without notice.
Copyright © 2015 Whynter LLC
WWW.WHYNTER.COM
17
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising