Broan | BRRM533004 | Spec sheet | Broan BRRM533004 Spec Sheet

SPECIFICATION SHEET
RM53000 SERIES
RANGE HOOD
Clean lines and contemporary style make this wallmounted, stainless steel hood a popular choice.
TYPICAL SPECIFICATION
FEATURES
Unit shall be for indoor use only.
•
•
•
•
•
•
•
•
Unit shall be convertible between ducted (using a washable
aluminum filter) and non-ducted (using a recirculation kit).
•
•
•
•
Professional style design
430 Stainless Steel #4 Brushed construction
Wall mount installation
Ducted/non-ducted telescopic flue - fits 8 ft. to 9 ft. ceilings
6” round duct connector/backdraft damper
370 cfm centrifugal blower
Three-speed slide control
Dual halogen lighting (2 x 20 Watt, Type JC 12V 20W G4
Base - bulbs included)
Dishwasher-safe aluminum filter features a quick-release
latch and professional style appearance
Available size: 30”, 36”, 42”
Heat SentryTM - automatically turns blower to high speed
when excess cooking heat is detected
For indoor use only
Range hood shall be Broan RM53000 Series.
Motor to be permanently lubricated.
Unit shall have three-speed fan switch and separate light
switch.
Air delivery shall be no less than 370 CFM.
Unit shall be U.L. and cUL listed.
OPTIONS
•
•
•
•
Replacement grease filters available
Non-ducted recirculation kit (Model RRK51)
Replacement charcoal filter (Model FILTERSQUARE)
Flue Extension for 10 ft. ceiling Model RFX5304 (ducted
applications), Model RFXN5304 (non-ducted applications)
(39-3/8” Long)
SPECIFICATIONS
VOLTS
AMPS
CFM
SONES
DUCT
120
2.63
370
7.0
6” round
HVI-2100 CERTIFIED RATINGS comply with new testing
technologies and procedures prescribed by the Home
Ventilating Institute, for off-the-shelf products, as they are
available to consumers. Product performance is rated at 0.1
in. static pressure, based on tests conducted in a state-ofthe-art test laboratory. Sones are a measure of humanlyperceived loudness, based on laboratory measurements.
Broan-NuTone LLC Hartford, Wisconsin www.broan.com 800-558-1711
Broan-NuTone Canada, Inc. Mississauga, Ontario www.broan.ca 877-896-1119
REFERENCE
QTY.
REMARKS
Project
Location
Architect
Engineer
Contractor
Submitted by
51D
Date
99043480D
RM53000 SERIES WIRING
120-VOLT, 60 HZ, GROUNDED WALL OUTLET
OFFSET FROM DUCT CENTER LINE
(STAY WITHIN 7” DIMENSION)
7”
3-1/2”
CENTERLINE OF
HOOD & DUCT
18” - 22”
RM53000 SERIES MOUNTING
FRAMING BEHIND WOOD
CROSS SUPPORT
WOOD CROSS SUPPORT –
SECURED TO FRAMING AND
LOCATED BEHIND DRYWALL
DRYWALL
L
C
L
5
1
16 "
MOUNTING BRACKET
LOCATION
(ABOVE 36” HIGH
COOKTOP)
NOTES:
1. Minimum hood distance above cooktop
must not be less than 24”.
A maximum of 30” above the cooktop is
highly recommended for best capture of
cooking impurities.
Distances over 30” above the cooktop
are at the installer’s and user’s discretion - providing that ceiling height and flue
length permit.
2. Requires optional 10-foot flue extension
model RFX5304 (ducted) or RFXN5304
(non-ducted).
Broan-NuTone LLC Hartford, Wisconsin www.broan.com 800-558-1711
Broan-NuTone Canada, Inc. Mississauga, Ontario www.broan.ca 877-896-1119
Download PDF

advertising