Faber INPL3622SS Spec Sheet/ Dimensions (PDF)

Faber INPL3622SS Spec Sheet/ Dimensions (PDF)
Inca Pro Plus
Built - In Collection
Pro Series
All new versatile pro liner / hood
°
°
°
°
°
°
°
°
°
°
°
°
°
°
professional-style liner / insert hood
fits custom hoods 36” - 48” wide
19” or 22” depth available
300, 600 or 1200 internal PRO motor
900 or 1200 cfm remote blower
stainless steel finish
removable grease rail
angled baffle filters
2 level halogen lights
variable speed control dial
restaurant style baffle filters
New All in one Professional Liner from Faber. For custom
wood cabinet applications, available in three widths and two
convertible to recirculating*
depths depending on your needs. With the flexibility of four
sloped front and sides
blower options, the Inca Pro Plus offers the power, style and
functionality you need for today's custom pro hood
applications.
6” or 10” round duct
* it is highly recommended that
professional style cooking always be
vented to the outside.
Size
Model #
36" Wide X 19" Depth
42" Wide X 19" Depth
48" Wide X 19" Depth
36" Wide X 22" Depth
48" Wide X 22" Depth
INPL3619SS
INPL4219SS
INPL4819SS
INPL3622SS
INPL4822SS
Choose A Blower From Below
Internal 300 cfm blower kit
Internal 600 cfm blower kit
Internal 1200 cfm blower kit
Remote Blower 900 cfm kit
Remote Blower 1200 cfm kit
IB300
IB600
IB1200
RB900
RB1200
ACCESSORIES
Charcoal Filters
FILTER1
For recirculating installations, high
quality, heavy duty filters ensure
the removal of smoke and odors
from the kitchen. Some ductwork is
required to exhaust the unit out of
the cabinet.
In-line blower Kit INLBKIT
Use to connect an in-line blower to
the range hood
p.o. box 435 • Wayland, MA 01778 • tel: (508) 358-5353 • fax: (508) 358-5730 • e-mail: [email protected] • www.faberonline.com
Dimensional Diagrams
OVERALL
0
SIDE
0
Pre-Planning Your Installation - Important: Consult the installation instructions before you begin
installing this rangehood. The recommended height to install this hood off the cooktop is a minimum of
30” for maximum effectiveness. Also consult the cooktop manufacturer’s recommendation.
Pre-Planning Your Ductwork - Important: Consult the installation instructions before you begin installing this rangehood.
Make your ductrun as straight and
short as possible. The ductrun should
not exceed 35 equivalent feet if
ducted with the required minimum of
6” round duct. Count 45º angles as 3
feet, 90º elbows as 5 feet, and 90º flat
elbows as 12 feet.
For best results, use no more than
three 90° elbows. Make sure that
there is a minimum of 24” of straight
duct between elbows if more than
one is used. Do not install two
elbows together. If you must elbow
right away, do it as far away from
the hood’s exhaust opening as possible.
Recirculating Installations
IT IS HIGHLY RECOMMENDED THAT PROFESSIONAL STYLE COOKING
ALWAYS BE VENTED TO THE OUTSIDE. For installations where ductwork to
the outside of your home is impossible or highly impractical Charcoal Filters,
which attach to the blower assembly, absorb smoke and odors.
ceiling
cabinet
or
custom
hood
vent grate
vent grate
cabinet
or
custom
hood
duct
work
hood
duct
work
Some ductwork
must be installed to
exhaust the rangehood back into
the kitchen either
at the top or face
of the cabinet or
wood hood. This
duct work must not
terminate into a
dead air space or
inside the cabinet
or custom hood.
WARNING! Product specifications are subject to change without notification. Consult the installation instructions
before you begin installing this rangehood.
ceiling
Rev. 07/11
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement