Best | CP37I482SB | CP3 Specification Guide | Best CP37I482SB CP3 Specification Guide

SPECIFICATION SHEET
12
8”
7/
5-
3”
4-1
/
7/8 2”
”
11”
All-in-one design includes liner, blower,
filtration, controls, lighting, and damper for easy
installation into custom canopy hoods. Intended
for all residential applications, including
commercial-style cooking surfaces.
”
CP37 SERIES
RANGE HOODS
7/8
”
FEATURES
3”
CL
• Cabinet mount - custom applications
• Finish: 430 Stainless Steel #4 Brushed
• Width: 46-3/8”
• Depth: 22-1/2”
• 10” round duct connector with backdraft damper
• Two-setting cooktop lighting (Uses two 50W, GU10
*4
6-3
/8”
* Add 1/16”
*
22
1/
2"
for rivet heads.
halogen lamps. Bulbs included.)
• Easily accessible, dishwasher safe stainless steel baffle
filters with handles
• Infinite speed rotary blower control with on-off rocker
switch
• Powerful, centrifugal blower with high-efficiency motor
HVI-2100 CERTIFIED RATINGS comply with new testing
technologies and procedures prescribed by the Home Ventilating
Institute, for off-the-shelf products, as they are available to
consumers. Product performance is rated at 0.1 in. static
pressure, based on tests conducted in a state-of-the-art test
laboratory. Sones are a measure of humanly-perceived loudness,
based on laboratory measurements.
produces 1200 CFM
• Quiet, normal speed operation
• Heat Sentry - automatically turns blower to high speed
TM
when excess cooking heat is detected
• For indoor use only
SPECIFICATIONS
VOLTS AMPS
120
9.0
CFM
SONES
DUCT
1200 (high speed)
380 (low speed)
13.5
2.0
10” round
BEST
REFERENCE
QTY.
Hartford, Wisconsin
www.BestRangeHoods.com
REMARKS
800-558-1711
Project
Location
Architect
Engineer
Contractor
Submitted by
01B
Date
99044477E
To minimize the gap around the power pack, take actual width and depth
measurements of power pack and add 1/16” to get D and E measurements. Cut
the hole in the bottom of the cabinet according to dimensions. See chart and
illustration for details.
POWER PACK
MODEL
WIDTH
CP37
48”
CUTOUT DIMENSIONS
D
E
22 5⁄8”
D
46 ½”
E
HD0367
CP37 SERIES HOOD SYSTEM
MODEL 437
HIGH CAPACITY ROOF CAP
MODEL 441
10” ROUND WALL CAP
MODEL 418
10” ROUND
ADJUSTABLE ELBOW
MODEL 410
10” ROUND
STANDARD DUCT
10” ROUND VERICAL IN-LINE DAMPER
(INCLUDED WITH CP37 SERIES HOOD)
CP37 SERIES
HOOD
DUAL BLOWER (1200 CFM)
(INCLUDED WITH CP37 SERIES HOOD)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertising