Viking TVWH360SS Insstallation Instruction

Viking TVWH360SS Insstallation Instruction
Installation
Professional Indoor & Outdoor Hoods
VWH53012 / CVWH53012 / VWH53612 / CVWH53612
VWH53048 / CVWH53048 / VWH53648 / CVWH53648 / VWH54248 / CVWH54248 /
VWH54848 / CVWH54848 / VWH56048 / CVWH56048
VCWH53048 / CVCWH53048 / VCWH53648 / CVCWH53648 / VCWH54248 / CVCWH54248 /
VCWH54848 / CVCWH54848 / VCWH56048 / CVCWH56048
VCIH53608 / CVCIH53608 / VCIH54208 / CVCIH54208 / VCIH55408 / CVCIH55408 / VCIH56608 / CVCIH56608
VBCV53638 / CVBCV53638 / VBCV54238 / CVBCV54238 / VBCV54838 / CVBCV54838 / VBCV56038 / VBCV56038
VWHO3678 / VWHO4878 / VWHO6078 (Canadian Outdoor models not applicable)
Table of Contents
Warnings & Important Information________________________________________________________ 3-4
VWH/CVWH 10” H/12”H. Wall Hoods w/Standard Ventilator 30”, & 36”
Dimensions & Specifications _____________________________________________________ 5
Clearance Dimensions ___________________________________________________________ 6
Interior Ventilator Dimensions ____________________________________________________ 7
VWH/CVWH 18”H. 24”Deep Wall Hoods 30”, 36”, 42”, 48”, & 60”
Dimensions & Specifications ______________________________________________________ 8
Clearance Dimensions _____________________________________________________________ 9
Interior Ventilator Dimensions _____________________________________________________ 10
Exterior Ventilator Dimensions ___________________________________________________ 11
VWHO/CVWHO 18”H. Outdoor Wall Hoods 36”, 48”, & 60”
Dimensions & Specifications _____________________________________________________ 12
Clearance Dimensions __________________________________________________________ 13
VCWH/CVCWH Chimney Wall Hoods 30”, 36”, 42”, 48”, & 60”
Dimensions & Specifications _____________________________________________________ 14
Clearance Dimensions __________________________________________________________ 15
Interior Ventilator Dimensions ___________________________________________________ 16
Exterior Ventilator Dimensions ___________________________________________________ 17
VCIH/CVCIH Chimney Island Hoods 36”, 42”, 54”, & 66”
Dimensions & Specifications _____________________________________________________ 18
Clearance Dimensions ___________________________________________________________ 19
Interior Ventilator Dimensions ___________________________________________________ 20
Exterior Ventilator Dimensions ___________________________________________________ 21
VBCV/CVBCV Wall Custom Ventilator System
Dimensions & Specifications _____________________________________________________ 22
Installing Hood Canopy _________________________________________________________ 23
Clearance Dimensions ___________________________________________________________ 24
VBCV Ventilator Dimensions _____________________________________________________ 25
Planning Information________________________________________________________________ 27
Installation Procedures
Installation (VWH/CVWH 10”H./12”H. Wall Hoods w/Standard Ventilator) _____________ 28
Duct Cover Option (VWH/CVWH 12”H. Wall Hoods w/Standard Ventilator) ____________ 30
Installation (VWH/CVWH 12”H. Wall Hoods w/Recirculating Kit) ______________________ 30
Installation (VWH/CVWH 18”H. Wall & VCWH Chimney Wall Hoods) __________________ 33
Duct Cover Option (VWH/CVWH 18”H. Wall Hoods) ________________________________ 34
Duct Cover Option (VCWH/CVCWH Chimney Wall Hoods) __________________________ 35
Installation (VCIH Island Hoods) __________________________________________________ 36
Service & Registration_______________________________________________________________ 38
Wiring Diagram ____________________________________________________________________ 39
2
IMPORTANT–Please Read and Follow!
NOTE: If installing hood with warming shelf panel, install
warming shelf panel first.
WARNING
To reduce the risk of fire, electric shock, or injury to
persons, observe the following:
IMPORTANT – PLEASE READ AND FOLLOW
• Before beginning, please read these instructions
completely and carefully.
• Do not remove permanently affixed labels, warnings, or
plates from the product. This may void the warranty.
• Please observe all local and national codes and
ordinances. If no local codes are applicable, wire in
accordance with the National Electrical Code,
ANSI/NFPA 70-latest edition.
• Damp environment approved models should be installed
in a covered non-enclosed area and should be protected
from the elements as much as possible.
• The installer should leave these instructions with the
consumer who should retain for local inspector’s use and
for future reference.
• Check with a qualified and trained installer or local codes
for makeup air requirement, if any.
• Use this unit only in the manner intended by the
manufacturer. If you have any questions, contact
the manufacturer.
• Before servicing or cleaning unit, switch power off
at service panel and lock service panel to prevent
power from being switched on accidentally. When
the service disconnecting means cannot be locked,
securely fasten a prominent warning device, such
as a tag, to the service panel.
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRICAL
SHOCK, OR INJURY TO PERSONS, OBSERVE
THE FOLLOWING:
1. Installation work and electrical wiring must be
done by qualified person(s) in accordance with
all applicable codes and standards, including
fire-rated construction.
2. Sufficient air is needed for proper combustion
and exhausting of gases through the flute
(chimney) of fuel burning equipment to prevent
back drafting. Follow the heating equipment
manufacturer’s guideline and safety standards
such as those published by the National Fire
Protection Association (NFPA), and the
American Society for Heating, Refrigeration and
Air Conditioning Engineers (ASHRAE), and the
local code authorities.
3. When cutting of drilling into wall or ceiling, do
not damage electrical wiring and other hidden
utilities.
4. Ducted fans must always be vented to the outdoors.
5. WARNING!: To reduce risk of fire, use only
metal ductwork
6. CAUTION!: To reduce risk of fire and to
properly exhaust air, be sure to duct air outside.
Do not vent exhaust air into spaces within walls
or ceilings, or into attics, crawl spaces, or
garages.
7. CAUTION!: To Reduce the Risk of Fire and
Electric Shock, Install this rangehood only with
remote blower models manufactured by Viking,
model numbers – DEV900/DEV1200, VEV900,
VIL1200, OR DEV1500 or integral blowers
manufactured by Viking, model numbers –
VINV300/600/1200, or DIL1200. NOTE – Please
refer inside for specific canopy/blower
combinations.
This hood is for residential installation only and is not
designed for installation over a commercial product. Make
sure power is off at the main circuit breaker or fuse box
before making connections. To avoid risk of fire, electric
shock, or injury to persons, turn off the electricity to the
hood from the power supply before servicing or cleaning.
Viking hoods are equipped with variable speed control
blowers. These units will not function with a single speed
ventilator. All Viking Range ventilator kits are designed
specifically for use with Viking Range hoods. Use of any
non-Viking Range ventilator kit will void the hood warranty.
Viking hoods are equipped with the variable speed
controls for blowers. These units will not function with a
single speed ventilator. All Viking ventilator kits are
designed specifically for use with Viking hoods. Use of any
non-Viking ventilator kit will void the hood warranty.
READ AND SAVE THESE INSTRUCTIONS
3
IMPORTANT–Please Read and Follow!
WARNING
WARNING
To reduce the risk of injury to persons in the event
of a rangetop grease fire, observe the following.
(Based on “Kitchen Firesafety Tips,” published by
NFPA.)
This appliance is not to be used by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning the use of the appliance
by a person responsible for their safety. Children
should be supervised to ensure that they do not
play with the appliance.
1. SMOTHER FLAMES with a close fitted lid, cookie
sheet, or metal tray, then turn off the burner. BE
CAREFUL TO PREVENT BURNS. If the flames do
not go out immediately, EVACUATE AND CALL
THE FIRE DEPARTMENT.
2. NEVER PICK UP A FLAMING PAN. You may be
burned.
3. DO NOT USE WATER, including wet dishcloths or
towels a violent steam explosion will result.
4. Use an extinguisher ONLY if
• You know it is a Class ABC extinguisher, and you
already know how to operate it.
• The fire is small and contained in the area where
it started.
• The fire department is being called.
• You can fight the fire with your back to an exit.
CAUTION
For general ventilating use only. Do not use to
exhaust hazardous or explosive materials and
vapors.
WARNING
TO REDUCE THE RISK OF FIRE,
ELECTRICAL SHOCK, OR INJURY
TO PERSONS
Rangehoods must be installed with
the ventilators that are specified on
their carton indicating suitability with
this model. Other ventilators cannot be substituted.
4
Dimensions & Specifications
(VWH 10”H./12”H. Wall Hoods w/Standard Ventilator 30”, & 36”)
1
(30 2 ”
.5
cm
)
(2510”
.4
c
(12 5”
.7
cm
m)
)
”
21 cm)
A
.3
(53
1
30”W.
36”W.
(30 2 ”
.5
cm
)
A (Hood width)
29-7/8“ (76.2 cm)
35-7/8” (91.1 cm)
1
(30 2 ”
.5
cm
)
(12 5”
.7
cm
)
”
21 cm)
A
.3
(53
30”W.
36”W.
A (Hood width)
29-7/8“ (76.2 cm)
35-7/8” (91.1 cm)
NOTE: Optional duct cover sold separately.
VWH/CVWH 10”H./12”H. Wall Hoods
w/Standard Ventilator
Description
Duct cover width
30”
36”
29-7/8” (75.9 cm)
35-7/8” (91.1 cm)
Duct cover depth
12” (30.5 cm)
Duct cover height
12” (30.5 cm)
Number of lights
2
Number of filters
2
N/A
Heat lamps
Interior ventilator kit
Interior duct size*
460 CFM Standard
7” (17.8 cm)
5.6 A
Interior—Maximum amps
* Disregard when using recirculating kits.
460 CFM blower is shipped with hood.
5
Clearance Dimensions
(VWH/CVWH 10”H./12”H. Wall Hoods w/Standard Ventilator)
60
24
(15" m
2.4 in.
c
63 to m)
"
(16 m
0.0 ax.
cm
)
(61" mi
.0 n.
c
27 to m)
"m
(68 a
.6 x.*
cm
)
"
36 cm)
.4
(91
* NOTE: When installing with a 24” high-shelf,
the 27” (68.6 cm) max. dimensions must be used.
6
Interior Ventilator Dimensions
(VWH/CVWH 10”H./12”H. Wall Hoods w/Standard Ventilator)
Top View
24”W.
30”W.
36”W.
A
23-7/8” (60.6 cm)
29-7/8” (75.9 cm)
35-7/8” (91.1 cm)
24”W.
30”W.
36”W.
B
5-1/4” (13.3 cm)
8-1/4” (20.9 cm)
11-1/4” (28.6 cm)
24”W.
30”W.
36”W.
C
11-15/16” (30.3 cm)
14-15/16” (37.9 cm)
17-15/16” (45.6 cm)
24”W.
30”W.
36”W.
D
5/8” (1.6 cm)
3-5/8” (9.2 cm)
6-5/8” (16.8 cm)
A
18”
(4.6 cm)
B
D
3-4”
(1.9 cm)
C
4”
(10.2 cm)
3-7/8”
(9.8 cm)
7” (17.8 cm) dia.
duct location
460 CFM Interior Ventilator Installation
7
1/2”
(1.3 cm)
3-1/2”
(8.9 cm)
Electrical
hookup
Dimensions & Specifications
(VWH/CVWH 18”H. 24” Deep Wall Hoods 30”, 36”, 42”, 48”, & 60”)
30" W
36" W
42" W
48" W
60" W
A
29-7/8" (76.2 cm)
35-7/8" (91.1 cm)
41-7/8" (106.4 cm)
47-7/8" (121.6 cm)
59-7/8" (152.1 cm)
(3012"
.5
cm
)
(15 6"
.2
cm
(4518"
.7
cm
)
)
A
"
24 cm)
.0
(61
NOTE: Optional duct cover sold separately.
VWH/CVWH 18”H. Wall Hoods
Description
Duct cover width
30”
36”
42”
48”
60”
29-7/8”
(75.9 cm)
35-7/8”
(91.1 cm)
41-7/8”
(106.4 cm)
47-7/8”
(121.6 cm)
59-7/8”
(152.1 cm)
Duct cover depth
12” (30.5 cm)
Duct cover height
12” (30.5 cm)
Number of lights
2
2
2
3
4
Number of filters
2
2
2
3
4
1
1
1
2
3
VINV300/
600/1200
DEV900/
1200*
DIL1200
VINV300/
600/1200
DEV900/
1200*
DIL1200
VINV600/
1200
DEV900/
1200*
DIL1200
VINV1200*
VINV1200*
DEV1200*/
1500**
DIL1200
DEV1200*/
1500**
DIL1200
7”/10”
(17.8/25.4 cm)
7”/10”
(17.8/25.4 cm)
7”/10”
(17.8/25.4 cm)
10”
(25.4 cm)
10”
(25.4 cm)
Interior—Maximum amps
4.2/5.2/8.2
4.2/5.2/8.2
5.2/8.2
10.8
10.8
Exterior—Maximum amps
8.0/5.3
8.0/5.3
8.0/5.3
7.8/8.5
7.8/8.5
In-Line—Maximum amps
5.3/7.2
5.3/7.2
5.3/7.2
9.6
10.0
Heat lamps
Interior ventilator kits
Exterior ventilator kits
In-line ventilator kits
Interior duct size
10” (24.5 cm)
Exterior duct size
47 Watts
Total Watts
* A 1,200 CFM interior- or exterior-power ventilator should be used when installed over range/rangetop with gas char-grill.
Max duct run is 50 ft.
** It is recommended that the 1,500 CFM ventilator be used with longer duct runs. Max duct run is 75 ft.
NOTE: Maximum amp rating for hoods includes recommended ventilator kit rating; All products must be hard wired with 2wire with ground. An interior- or exterior-power ventilator kit must be purchased for installation with all 18”H. hoods.
8
Clearance Dimensions
(VWH/CVWH 18”H. Wall Hoods)
66
(16” m
7.6 in.
c
72 to m)
”
(18 m
2.9 ax.
cm
)
30
(76” mi
.2 n.
c
36 to m)
”
(91 ma
.4 x.
cm
)
”
36 cm)
.4
(91
9
Interior Ventilator Dimensions
(VWH/CVWH 18”H. Wall Hoods)
Top View
A
30" W
36" W
42" W
48" W
60" W
A
14-15/16" (37.9 cm)
17-15/16" (45.6 cm)
20-15/16" (53.2 cm)
23-15/16" (60.8 cm)
29-15/16" (76.0 cm)
30" W
36" W
42" W
48" W
60" W
4-5/8"
(11.7 cm)
B
29-7/8" (75.9 cm)
35-7/8" (91.1 cm)
41-7/8" (106.4 cm)
47-7/8" (121.6 cm)
59-7/8" (152.1 cm)
7" (17.8 cm)
dia. duct location
B
300 or 600 CFM Interior Ventilator Installation for all Wall Hoods
Top View
A
30" W
36" W
42" W
48" W
60" W
A
14-15/16" (37.9 cm)
17-15/16" (45.6 cm)
20-15/16" (53.2 cm)
23-15/16" (60.8 cm)
29-15/16" (76.0 cm)
30" W
36" W
42" W
48" W
60" W
5-1/2"
(14.0 cm)
B
29-7/8" (75.9 cm)
35-7/8" (91.1 cm)
41-7/8" (106.4 cm)
47-7/8" (121.6 cm)
59-7/8" (152.1 cm)
10" (25.4 cm)
dia. duct location
B
1200 CFM Interior Ventilator Installation for all Wall Hoods
10
Exterior Ventilator Dimensions
(VWH/CVWH 18”H. Wall Hoods)
Top View
A
30" W
36" W
42" W
48" W
60" W
A
14-15/16" (37.9 cm)
17-15/16" (45.6 cm)
20-15/16" (53.2 cm)
23-15/16" (60.8 cm)
29-15/16" (76.0 cm)
30" W
36" W
42" W
48" W
60" W
5-15/16"
(15.1 cm)
B
29-7/8" (75.9 cm)
35-7/8" (91.1 cm)
41-7/8" (106.4 cm)
47-7/8" (121.6 cm)
59-7/8" (152.1 cm)
10" (25.4 cm)
dia. duct location
B
900 or 1200 CFM Exterior or In-Line Ventilator Installation for all
Wall Hoods
Top View
A
30" W
36" W
42" W
48" W
60" W
A
14-15/16" (37.9 cm)
17-15/16" (45.6 cm)
20-15/16" (53.2 cm)
23-15/16" (60.8 cm)
29-15/16" (76.0 cm)
30" W
36" W
42" W
48" W
60" W
5-15/16"
(15.1 cm)
B
29-7/8" (75.9 cm)
35-7/8" (91.1 cm)
41-7/8" (106.4 cm)
47-7/8" (121.6 cm)
59-7/8" (152.1 cm)
10" (25.4 cm)
dia. duct location
B
1200 or 1500 CFM Exterior or In-Line Ventilator Installation for all
Wall Hoods
11
Dimensions & Specifications
(VWHO/CVWHO 18”H. Outdoor Wall Hoods 36”, 48”, & 60”)
Seal joints with silicone.
Provided on “T” Series only.
(3012"
.5
cm
)
(15 6"
.2
cm
(4518"
.7
cm
)
)
A
35-7/8" (91.1 cm)
47-7/8" (121.6 cm)
59-7/8" (152.1 cm)
36" W
48" W
60" W
"
27 cm)
A
.6
(68
NOTE: Optional duct cover sold separately.
VWHO/CVWHO 18”H. Outdoor Wall Hoods
Description
Duct cover width
36”
48”
60”
35-7/8” (91.1 cm)
47-7/8” (121.6 cm)
59-7/8” (152.1 cm)
12” (30.5 cm)
Duct cover depth
12” (30.5 cm)
Duct cover height
Number of lights
2
3
4
Number of filters
2
3
4
Interior ventilator kits
VINV1200*
VINV1200*
VINV1200*
Exterior ventilator kits
DEV1200*/1500**
DEV1200*/1500**
DEV1200*/1500**
DIL1200
DIL1200
In-line ventilator kits
DIL1200
Interior duct size
10” (25.4 cm)
Exterior duct size
10” (25.4 cm)
Interior—Maximum amps
9.0
11.4
11.8
Exterior—Maximum amps
6.1/6.8
8.4/9.1
8.8/9.5
In-Line—Maximum amps
7.9
10.2
10.6
47 Watts
Total watts
* A 1,200 CFM interior- or exterior-power ventilator should be used with all outdoor models and when indoor models are
installed over range/rangetop with gas char-grill. Max duct run is 50 ft.
** It is recommended that the 1,500 CFM ventilator be used with longer duct runs. Max duct run is 75 ft.
NOTE: Maximum amp rating for hoods includes recommended ventilator kit rating; All products must be hard wired with 2wire with ground. An interior- or exterior-power ventilator kit must be purchased for installation with all 18”H. hoods.
12
Clearance Dimensions
(VWHO/CVWHO 18”H. Outdoor Wall Hoods)
"
18 )
m
c
5.7
»
«X
M 1/2")
I
D 4- m
+ 1.4 c
(4
(1
"
27 cm)
.6
(68
66
(16" m
7.6 in.
c
72 to m)
(18" m
2.9 ax.
cm
)
30
(76" m
. 2 in.
c
36 to m)
"m
(91 a
.4 x.
cm
)
"
36 cm)
.4
(91
Note: Outdoor Models must be installed in a covered, non-enclosed area, and should be protected from
the elements as much as possible.
The bottom of the hood should be 30” (76.2 cm) to 36” (91.4 cm) above the grill surface. The hood
should be installed 4-1/2” (11.4 cm) plus the distance between the back trim and surface from the back
wall. (Note: There is a 3” minimum clearance from the back trim to non-combustible surfaces, and a 24”
minimum to combustible surfaces.) This will require building the hood out from the wall. Any combustible
material used for this purpose must be covered with locally-supplied stainless steel. Viking also
recommends using a backsplash.
13
Dimensions & Specifications
(VCWH/CVCWH
Chimney Wall Hoods 30”, 36”, 42”, 48”, 54”, & 60”)
A
30”W.
36”W.
42”W.
48“W.
60”W.
66”W.
A (Duct width)
12“ (30.5 cm)
12“ (30.5 cm)
12“ (30.5 cm)
18“ (45.7 cm)
24“ (61.0 cm)
24“ (61.0 cm)
B (Hood width)
30”W.
29-7/8“ (76.2 cm)
36”W.
35-7/8” (91.1 cm)
42”W.
41-7/8” (106.4 cm)
48“W.
47-7/8” (121.6 cm)
60”W.
59-7/8” (152.1 cm)
66”W.
65-7/8” (167.3 cm)
(3012”
.5
c
to m)
(6124”
.0
cm
)
(15 6”
.2
cm
)
(4518”
.7
cm
)
”
24 cm)
B
.0
(61
NOTE: Optional duct cover sold separately.
VCWH Chimney Wall Hoods
Description
Duct cover width
30”
12” (30.5 cm)
36”
42”
48”
60”
12” (30.5 cm) 12” (30.5 cm) 18” (45.7 cm) 24” (61.0 cm)
12” (30.5 cm)
Duct cover depth
12” (30.5 cm) to 24” (61.0 cm)
Duct cover height
Number of lights
2
2
2
3
4
Number of filters
2
2
2
2
3
1
VINV300/600
1
VINV300/600
1
VINV600
2
VINV1200*
3
VINV1200*
DEV900/
1200*
DIL1200
DEV900/
1200*
DIL1200
DEV900/
1200*
DIL1200
DEV1200*/
1500**
DIL1200
DEV1200*/
1500**
DIL1200
7” (17.8 cm)
7” (17.8 cm)
7” (17.8 cm)
Interior—Maximum amps
4.2/5.2
4.2/5.2
10.8
10.8
Exterior—Maximum amps
8.0/5.3
8.0/5.3
8.0/5.3
7.8/8.5
7.8/8.5
In-Line—Maximum amps
Total Watts
5.3/7.2
5.3/7.2
5.3/7.2
9.6
10.0
Heat lamps
Interior ventilator kits
Exterior ventilator kits
In-line ventilator kits
Interior duct size
Exterior duct size
10” (25.4 cm)
5.2
10” (25.4 cm) 10” (25.4 cm)
47Watts
* A 1,200 CFM interior- or exterior-power ventilator should be used when installed over range/rangetop with gas char-grill. Max
duct run is 50 ft.
** It is recommended that the 1,500 CFM ventilator be used with longer duct runs. Max duct run is 75 ft.
NOTE: Maximum amp rating for hoods includes recommended ventilator kit rating; All products must be hard wired with 2-wire
with ground. An interior- or exterior-power ventilator kit must be purchased for installation with all 18”H. hoods.
14
Clearance Dimensions
(VCWH/CVCWH Chimney Wall Hoods)
66
(16” m
7.6 in.
c
72 to m)
(18” m
2.9 ax.
cm
)
30
(76” mi
.2 n.
c
36 to m)
”m
(91 a
.4 x.
cm
)
”
36 cm)
.4
(91
15
Interior Ventilator Dimensions
(VCWH/CVCWH Chimney Wall Hoods)
Top View
12”
(30.5 cm)
120V
power
supply
1-1/2”
(3.8 cm)
A
30”W.
36”W.
42”W.
A
14-15/16” (37.9 cm)
17-15/16” (45.6 cm)
20-15/16” (53.2 cm)
30”W.
36”W.
42”W.
B
29-7/8” (75.9 cm)
35-7/8” (91.1 cm)
41-7/8” (106.4 cm)
6”
(15.2 cm)
1-1/2”
(3.8 cm)
7” (17.8 cm) dia.
duct location
B
300 or 600 CFM Interior Ventilator Installation
for 30”, 36”, & 42” models
Top View
C
1-1/2”
(3.8 cm)
120 V
power
supply
A
48”W.
60”W.
66”W.
A
23-15/16” (60.8 cm)
29-15/16” (76.0 cm)
32-15/16” (83.7 cm)
48”W.
60”W.
66”W.
B
47-7/8” (121.6 cm)
59-7/8” (152.1 cm)
65-7/8” (167.3 cm)
6”
(15.2 cm)
1-1/2”
(3.8 cm)
48”W.
60”W.
66”W.
10” (25.4 cm) dia.
duct location
B
1200 CFM Interior Ventilator Installation
for 48”, & 60”models
16
C
18” (45.7 cm)
24” (61.0 cm)
24” (61.0 cm)
Exterior Ventilator Dimensions
(VCWH/CVCWH Chimney Wall Hoods)
Top View
12”
(30.5 cm)
1-1/2”
(3.8 cm)
120V
power
supply
A
30”W.
36”W.
42”W.
A
14-15/16” (37.9 cm)
17-15/16” (45.6 cm)
20-15/16” (53.2 cm)
30”W.
36”W.
42”W.
B
29-7/8” (75.9 cm)
35-7/8” (91.1 cm)
41-7/8” (106.4 cm)
6”
(15.2 cm)
1-1/2”
(3.8 cm)
10” (25.4 cm) dia.
duct location
B
900 or 1200 CFM Exterior or In-Line Ventilator Installation
for 30”, 36”, & 42” models
Top View
C
1-1/2”
(3.8 cm)
120 V
power
supply
A
48”W.
60”W.
66”W.
A
23-15/16” (60.8 cm)
29-15/16” (76.0 cm)
32-15/16” (83.7 cm)
48”W.
60”W.
66”W.
B
47-7/8” (121.6 cm)
59-7/8” (152.1 cm)
65-7/8” (167.3 cm)
6”
(15.2 cm)
1-1/2”
(3.8 cm)
48”W.
60”W.
66”W.
C
18” (45.7 cm)
24” (61.0 cm)
24” (61.0 cm)
10” (25.4 cm) dia.
duct location
B
900, 1200 or 1500 CFM Exterior or In-Line Ventilator Installation
for 48”, & 60”models
17
Dimensions & Specifications
(VCIH/CVCIH Chimney Island Hoods 36”, 42”, 54”, & 66”)
A
A
12" (30.5 cm)
12" (30.5 cm)
18" (45.7 cm)
24" (70.0 cm)
36" W
42" W
54" W
66" W
B
12" (30.5 cm)
or
24" (61.0 cm)
or
36" (91.4 cm)
36" W.
42" W.
54" W.
66" W.
36" W
42" W
54" W
66" W
(15 6"
.2
cm
B
)
(4518"
.7
cm
)
C
35-7/8" (91.1 cm)
41-7/8" (106.4 cm)
53-7/8" (136.8 cm)
65-7/8" (167.3 cm)
"
30 cm)
C
.2
(76
NOTE: Optional duct cover sold separately.
VCIH/CVCIH Chimney Island Hoods
Description
Duct cover width
36”
42”
54”
66”
12” (30.5 cm)
12” (30.5 cm)
18” (45.7 cm)
24” (70.0 cm)
Duct cover depth
12” (30.5 cm)
Duct cover height
12” (30.5 cm) or 24” (61.0 cm) or 36” (91.4 cm)
Number of lights
4
4
6
8
Number of filters
4
4
6
8
Interior ventilator kits
VINV600
VINV600
VINV1200*
VINV1200*
Exterior ventilator kits
DEV900/1200*
DEV900/1200*/1500**
DEV1200*/1500**
DEV1200*/1500**
DIL1200
DIL1200
DIL1200
DIL1200
7” (17.8 cm)
7” (17.8 cm)
10” (25.4 cm)
10” (25.4 cm)
Interior—Maximum amps
4.2/5.2/8.2
5.2/8.2
8.9
9.3
Exterior—Maximum amps
7.4/4.7
7.4/4.7/5.5
5.6/6.4
6.4/7.4
In-Line—Maximum amps
total Watts
4.7/6.5
3.9/5.7
7.4
7.4
N/A
Heat lamps
In-line ventilator kits
Interior duct size
10” (25.4 cm)
Exterior duct size
47 Watts
* A 1,200 CFM interior- or exterior-power ventilator should be used when installed over range/rangetop with gas char-grill. Max duct
run is 50 ft.
** It is recommended that the 1,500 CFM ventilator be used with longer duct runs. Max duct run is 75 ft.
NOTE: Maximum amp rating for hoods includes recommended ventilator kit rating; All products must be hard wired with 2-wire with
ground. An interior or exterior-power ventilator kit must be purchased for installation with all 18”H. hoods.
18
Clearance Dimensions
(VCIH /CVCIHChimney Island Hoods)
66
(16” m
7.6 in.
c
72 to m)
”
(18 m
2.9 ax.
cm
)
30
(76” min
.2 c .
m
36 to )
”
(91 max
.4 c .
m)
”
36 cm)
.4
(91
19
Interior Ventilator Dimensions
(VCIH/CVCIH Chimney Island Hoods)
Top View
12”
(30.5 cm)
36”W.
42”W.
A
17-15/16” (45.6 cm)
20-15/16” (53.2 cm)
36”W.
42”W.
B
35-7/8” (91.1 cm)
41-7/8” (106.4 cm)
1-1/8”
(2.9 cm)
120 V
power
supply
A
1-1/8”
(2.9 cm)
6”
(15.2 cm)
7” (17.8 cm) dia.
duct location
B
600 CFM Interior Ventilator Installation
for all Chimney Island Hoods
Top View
C
54”W.
66”W.
A
26-15/16” (68.4 cm)
32-15/16” (83.7 cm)
54”W.
66”W.
B
53-7/8” (136.8 cm)
65-7/8” (167.3 cm)
54”W.
66”W.
C
18” (45.7 cm)
24” (61.0 cm)
1-1/8”
(2.9 cm)
A
120 V
power
supply
1-1/8”
(2.9 cm)
6”
(15.2 cm)
10” (25.4 cm) dia.
duct location
B
1200 CFM Interior Ventilator Installation
for all Chimney Island Hoods
20
Exterior Ventilator Dimensions
(VCIH/CVCIH Chimney Island Hoods)
Top View
12”
(30.5 cm)
36”W.
42”W.
A
17-15/16” (45.6 cm)
20-15/16” (53.2 cm)
36”W.
42”W.
B
35-7/8” (91.1 cm)
41-7/8” (106.4 cm)
1-1/8”
(2.9 cm)
120 V
power
supply
A
1-1/8”
(2.9 cm)
6”
(15.2 cm)
10” (25.4 cm) dia.
duct location
B
900 or 1200 CFM Exterior or In-Line Ventilator Installation
for all Chimney Island Hoods
Top View
C
54”W.
66”W.
A
26-15/16” (68.4 cm)
32-15/16” (83.7 cm)
54”W.
66”W.
B
53-7/8” (136.8 cm)
65-7/8” (167.3 cm)
54”W.
66”W.
C
18” (45.7 cm)
24” (61.0 cm)
1-1/8”
(2.9 cm)
A
120 V
power
supply
1-1/8”
(2.9 cm)
6”
(15.2 cm)
10” (25.4 cm) dia.
duct location
B
900, 1200 or 1500 CFM Exterior or In-Line Ventilator Installation
for all Chimney Island Hoods
21
Dimensions & Specifications
(VBCV Wall Custom Ventilator System 36”, 42”, 48”, & 60”)
A*
*For best results,
center the unit over
the burners of the
cooking product
(front to back; right
to left).
Make sure the back wall
of the custom hood
canopy is flush with the
cutout so the ventilator
system may be mounted
as shown on page 25.
B*
Bottom Cutout Dimensions
Wall Hoods
Description
36”
42”
48”
60”
W.
W.
W.
W.
A (Hood Width)
B (Hood Depth)
33-7/16” (84.9 cm)
39-7/16” (100.2 cm)
45-7/16” (115.4 cm)
57-7/16” (145.9 cm)
21-7/16”
21-7/16”
21-7/16”
21-7/16”
(54.5
(54.5
(54.5
(54.5
cm)
cm)
cm)
cm)
VBCV Wall Custom Ventilator System
Description
36”
42”
48”
60”
Number of lights
2
2
3
4
Number of filters
2
2
3
4
Heat lamps
1
1
2
3
Interior ventilator kits
Exterior ventilator kits
In-line ventilator kits
Interior duct size
VINV300/
600/1200*
DEV900/
1200*
DIL1200
VINV600/ VINV1200* VINV1200*
1200*
DEV900/
DEV1200*/ DEV1200*/
1200*
1500**
1500**
DIL900/1200
DIL1200
DIL1200
7”/10”
7”/10”
10”
(17.8/25.4 cm) (17.8/25.4 cm) (25.4 cm)
10”
(25.4 cm)
10” (25.4
Exterior duct size
Interior—Maximum amps
4.2/5.2
10.8
10.8
10.8
Exterior—Maximum amps
8.0/5.3
8.0/5.3
7.8/8.5
7.8/8.5
In-Line—Maximum amps
5.3/7.2
5.3/7.2
9.6
10.0
47 Watts
Total Watts
* A 1,200 CFM interior- or exterior-power ventilator should be used when installed over range/rangetop with gas char-grill.
Max duct run is 50 ft.
** It is recommended that the 1,500 CFM ventilator be used with longer duct runs. Max duct run is 75 ft.
NOTE: Maximum amp rating for hoods includes recommended ventilator kit rating; All products must be hard wired with 2wire with ground. An interior- or exterior-power ventilator kit must be purchased for installation with all 18”H. hoods.
22
Installing Hood Canopy
(Custom Hood Canopy Cutouts)
Custom Hood
Canopy
A
B
1) Position ventilator
system inside of the
custom hood canopy
and center it front to
back and left to right.
Built-In Ventilator
System
2) Bottom mounting holes
fasten ventilator system
to bottom of custom
hood canopy with the
screws provided.
3) OPTIONAL
Rear mounting holes fasten
ventilator system to rear of
custom hood canopy.
23
Clearance Dimensions
(VBCV/CVBCV Wall Custom Ventilator System)
(Cu
sto
m
Ho
od
)
66
(16" m
7.6 in.
c
72 to m)
"
(18 m
2.9 ax.
cm
)
30
(76" mi
.2 n.
c
36 to m)
"m
(91 a
.4 x.
cm
)
"
36 cm)
.4
(91
24
Built-In Wall Custom Ventilator
System Dimensions (VBCV Models)
1-1/2”
(3.8 cm)
1"
(2.54 cm)
1-1/2"
(3.81 cm)
7/8”
(2.2 cm)
11-1/2”
(29.2 cm)
17-1/4”
(43.8 cm)
6”
(15.2 cm)
5/8"
(1.6 cm)
5/8”
(1.6 cm)
21-7/8”
(55.8 cm)
21-7/8po
(55.8 cm)
For 300, 600 or 1200 CFM Interior
Ventilator Installation
For 900, 1200 or 1500 CFM Exterior
or In-Line Ventilator Installation
D
D
4-5/8"
(11.7 cm)
5-1/2"
(14.0 cm)
7" (17.8 cm)
dia. duct location
10" (25.4 cm)
dia. duct location
5/8" (1.6 cm)
5/8" (1.6 cm)
C
C
300 or 600 CFM Interior
Ventilator Installation
36”, 42” W. Models
900 or 1200 CFM Exterior
or In-Line Ventilator Installation
36”, 42” W. Models
D
C
36” W.
42” W.
36” W.
42” W.
34-1/4” (87.0 cm)
40-1/4” (102.2 cm)
25
17-1/8” (43.5 cm)
20-1/8” (51.1 cm)
Built-In Wall Custom Ventilator
System Dimensions (VBCV/CVBCV Models)
D
5-1/2"
(14.0 cm)
10" (25.4 cm)
dia. duct location
5/8" (1.6 cm)
C
1200 or 1500 CFM Exterior or In-Line Ventilator Installation
48”, 60” W. Models
D
5-1/2"
(14.0 cm)
10" (25.4 cm)
dia. duct location
5/8" (1.6 cm)
C
1200 CFM Interior Ventilator Installation
36”, 42”, 48”, 60” W. Models
C
36”
42”
48”
60”
W.
W.
W.
W.
D
34-1/4” (87.0 cm)
40-1/4” (102.2 cm)
46-1/4” (117.5 cm)
58-1/4” (148.0 cm)
36”
42”
48”
60”
26
W.
W.
W.
W.
17-1/8” (43.5 cm)
20-1/8” (51.1 cm)
23-1/8” (58.7 cm)
29-1/8” (74.0 cm)
Planning Information
Proper installation of ducting is extremely
important to ensure maximum performance from
any ventilation product.
• All CFMs are based on tests at 0.1 static
pressure: without applying static pressure, CFM
would be greatly overstated.
• Straight runs and gradual turns are best; for
example, each 90º elbow is equivalent to 5-10
feet (1.52-3.05 cm) of straight run.
• Never use flexible duct; it creates back pressure/air
turbulence and greatly reduces performance.
• Proper performance is dependent on proper
ducting; make sure that a qualified and trained
installer is used.
• Check with a qualified and trained installer or
local codes for makeup air requirement, if any.
• Max. amp rating for hoods includes
recommended ventilator kit rating; all products
must be hard wired direct with 2-wire with ground.
Roof Cap
7” round duct
300 or 600 CFM
single blower
interior-power
typical ductwork
Duct cover or soffit
Hood
Roof cap
10” round duct
1200 CFM
single blower
interior power
typical ductwork
Duct cover or soffit
Plan where the duct work will be located. Install
proper-sized duct work, and roof or wall cap for the
type of blower you are using. Recommended hood
locations for the most common installations are
shown. Adjust your measurements for various heights
of ceilings, soffits, cabinets, or ranges/rangetops.
Hood
Exterior blower
10” round duct
900, 1200, or
1500 CFM
exterior power
typical ductwork
Check Framing
Duct cover or soffit
Hood
Wall Cap
Duct
Wall Installation exterior
power typical
ductwork
Duct cover or soffit
Hotte
NOTE: Because of the weight of the hood make sure
that the mounting screws are driven into the framing
and not just the drywall. It may be necessary to drill
additional holes in the canopy for proper alignment.
NOTE: Wall exhaust must be a minimum of 24” (61.0 cm)
from ground. This may vary depending on local codes
and geographic location.
27
Installation (VWH/CVWH 10”H./12”H. Wall Hoods w/Standard Ventilator)
2
1
Check damper for unrestricted movement, adjust if
necessary.
Attach transition to damper. Seal with aluminum tape.
WARNING
3
To reduce the risk of fire, electric shock, or injury to
persons, observe the following:
• Use this unit only in the manner intended by the
manufacturer. If you have any questions, contact
the manufacturer.
• Before servicing or cleaning unit, switch power off
at service panel and lock service panel to prevent
power from being switched on accidentally. When
the service disconnecting means cannot be locked,
securely fasten a prominent warning device, such
as a tag, to the service panel.
Flip hood over and remove electrical box cover.
5
4
1
2
1
Insert 6” of electrical wiring through the top of vent hood
and secure using wiring restrain. Refer to local codes.
Slide duct over transition and tape around joint.
28
6
Nut driver
5/16”
5/16”
Nut driver
CAUTION: If not using a duct cover, using screws
provided, make sure top mounting screws are secured
into soffit or cabinet framing. Use additional mounting
screws, if necessary.
CAUTION: Secure vent hood to wall using screws
provided. Use additional mounting screws and wall
anchors, if necessary.
7
8
Bare or Green
1
1
2
Green
Black
White
Black
White
Connect black to black, white to white, and the
green/bare wire under the green screw.
NOTE: Housing wiring must be properly installed for
wiring to be correct when wiring unit.
Replace electrical box cover. Make connection to
breaker box.
10
9
1
1
1
3
3
2
2
Slide filter front over front lip. Push filter rear up, then
slide back over rear lip.
Slide filter front over front lip. Push filter rear up, then
slide back over rear lip.
29
Duct Cover Option
(VWH/CVWH 10”H./12”H. Wall Hoods w/Standard Ventilator)
1
2
Measure distance from ceiling to canopy.
2
Slide the duct cover in place and fasten from inside
canopy using the sheet metal screws provided.
Installation
(VWH/CVWH 10”H./12”H. Wall Hoods w/Recirculating Kit)
1
2
Remove damper and discard with transition.
Turn recirculating unit upside down. Place vent hood
upside down on recirculating unit.
30
Installation
(VWH/CVWH 10”H./12”H. Wall Hoods w/Recirculating Kit)
3
4
Attach with screws and lock washers provided.
Attach with screws.
WARNING
5
To reduce the risk of fire, electric shock, or injury to
persons, observe the following:
• Use this unit only in the manner intended by the
manufacturer. If you have any questions, contact
the manufacturer.
• Before servicing or cleaning unit, switch power off
at service panel and lock service panel to prevent
power from being switched on accidentally. When
the service disconnecting means cannot be locked,
securely fasten a prominent warning device, such
as a tag, to the service panel.
Remove electrical box cover.
6
7
1
5/16”
Nut driver
2
Flip hood over. Insert 6” of electrical wiring through the
top of vent hood and secure. Refer to local codes.
CAUTION: Secure vent hood. Make sure mounting
screws are secured into framing. Use additional
mounting screws and wall anchors, if necessary.
31
Installation
(con’t)
(VWH/CVWH 10”H./12”H. Wall Hoods w/Recirculating Kit)
8
9
Bare or Green
1
1
2
Green
Black
White
Black
White
Connect black to black, white to white, and the
green/bare wire under the green screw.
NOTE: Housing wiring must be properly installed for
wiring to be correct when wiring unit.
Replace electrical box cover. Make connection to
breaker box.
10
11
1
2
3
Slide filter front over front lip. Push filter rear up, then
slide back over rear lip.
Assemble brackets to baffles and insert charcoal filters.
13
12
1
1
2
3
3
2
Slide filter front over front lip. Push filter rear up, then
slide back over rear lip.
Slide spacer front over front lip. Push spacer rear up,
then slide back over rear lip.
32
Installation
(VWH/CVWH 18”H. Wall & VCWH Chimney Wall Hoods) *For VCWH hoods, begin
with Step 3. The VCWH hoods do not require the wood strip
1
1-1/2” x 3/4”
(3.8 cm) x ( 1.9 cm)
1(4.13/1
6 c 6”
m)
2
5/16”
Nut driver
5/16”
Nut driver
wood strip
VWH/CVWH only! Measure down 1-13/16 (4.6 cm) from
desired height of hood and secure 1-1/2” x 3/4” wood
strip (provided locally) to wall using screws provided.
VWH/CVWH only! Use additional mounting screws to
secure hood to wood strip.
3
5/16”
Nut
Driper
5/16”
Nut driver
CAUTION: Secure vent hood to wall using screws
provided. Use additional mounting screws and wall
anchors, if necessary.
CAUTION: If not using a duct cover, using screws
provided, make sure top mounting screws are secured
into soffit or cabinet framing use additional mounting
screws, if necessary.
5
4
1
1
1
3
z
2
2
Slide filter front over front lip. Push filter rear up, then
slide back over rear lip.
Slide filter front over front lip. Push filter rear up, then
slide back over rear lip.
33
Duct Cover Option (VWH/CVWH 18”H. Wall Hoods)
2
1
Measure distance from ceiling to canopy.
2
Slide the duct cover in place and fasten from inside
canopy using the sheet metal screws provided.
To install ventillation kit
refer to ventillation kit
installation instructions.
34
Duct Cover Option
(VCWH/CVCWH Chimney Wall Hoods)
1
2
Measure distance from ceiling to canopy.
Tape to avoid scratching.
3
4
2
Place duct cover top inside duct cover base and lower until
desired height is found. Mark height. Use the retaining
nuts and bolts to fasten in place and remove tape.
Slide the duct cover in place and fasten from inside
canopy using the sheet metal screws provided.
35
Installation (VCIH/CVCIH Island Hoods)
2
1
Check framing where cutout will be.
NOTE: 200 lb. limit.
Cut appropriate size hole in ceiling. Either 7” or 10”
depending on your specific unit and ventillator kit.
A1
Mounting options:
Using duct cover with ceiling mounting
bracket. (Option A - VCIH only)
Using threaded rod for additional support.
(Option B)
Attaching hood directly to soffit or
duct cover.
(Skip to step 3)
Attach duct cover to optional ceiling mounting bracket.
A2
B1
5/16”
Nut
Driver
Additional support option. Drill holes in all four corners
for threaded rod and run rods from hood to ceiling.
Attach duct cover to ceiling. The ceiling bracket can be
hidden by using a locally supplied trim.
36
Installation (VCIH/CVCIH Island Hoods)
4
3
5/16”
Nut
Driver
Run duct work down to bottom edge of duct
cover/soffit and secure in place. Make sure the duct
does not stick down past the cover.
Attach canopy to duct cover/soffit. Seal top of hood to
duct with aluminum tape.
6
5
1
1
1
3
3
2
2
Slide filter front over front lip. Push filter rear up, then
slide back over rear lip.
Slide filter front over front lip. Push filter rear up, then
slide back over rear lip.
To install ventillation kit
refer to ventillation kit
installation instructions.
37
Service & Registration
If service is required, call your dealer or authorized service agency.
The name of the authorized service agency can be obtained from the dealer or distributor in
your area.
Have the following information readily available.
• Model number
• Serial number
• Date purchased
• Name of dealer from whom purchased
Clearly describe the problem that you are having. If you are unable to obtain the name of an
authorized service agency, or if you continue to have service problems, contact Viking Range,
LLC at 1-888-(845-4641), or write to:
VIKING RANGE, LLC
PREFERRED SERVICE
111 Front Street
Greenwood, Mississippi 38930 USA
Record the information indicated below. You will need it if service is ever required. The model and
serial number for your hood is located behind the baffle filter on the left side panel in the lower right
corner.
Model no. _____________________ Serial no. ________________________
Date of purchase _______________ Date installed ___________________
Dealer’s name __________________________________________________
Address ________________________________________________________
_______________________________________________________________
If service requires installation of parts, use only authorized parts to ensure protection under the
warranty.
THIS MANUAL SHOULD REMAIN WITH THE HOOD FOR FUTURE REFERENCE.
38
39
Viking Range, LLC
111 Front Street
Greenwood, Mississippi 38930 USA
(662) 455-1200
For product information,
call 1-888-(845-4641)
or visit our web site at vikingrange.com in the US
brigade.ca in Canada
F21287D EN
(091515)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement