Whirlpool | UXT5230BFS | Dimensions Sheet | Whirlpool UXT5230BFS Dimensions Sheet

30" (76.2 cm) Range Hood
PRODUCT MODEL NUMBERS
PRODUCT DIMENSIONS
UXT5230BF
2"
(5.1 cm)
ELECTRICAL REQUIREMENTS
A 120 volt, 60 Hz., AC only, 15-amp, fused electrical circuit is required.
INSTALLATION CLEARANCES
1"
(2.5 cm)
1"
(2.5 cm)
9"
(22.9 cm)
C
VENTING METHODS
NOTES:
A
■■ Flexible vent is not recommended. Flexible vent creates both back
pressure and air turbulence that greatly reduce performance.
D
■■ The vent system is optional for this model.
Vent system can terminate either through the roof or wall. Use 31/4" x 10"
(8.3 x 25.4 cm) rectangular with a maximum vent length of 35 ft (10.7 m)
or 7" (17.8 cm) or larger round vent with a maximum length of 50 ft (15.2
m) for vent system.
B
Top Venting
Wall Venting
B
A
E
A. 18" (45.7 cm) minimum distance from electric cooking surface
24" (61.0 cm) minimum distance from gas cooking surface
30" (76.2 cm) suggested maximum above the cooking surface
B. 18" (45.7 cm) minimum clearance - upper cabinet to countertop
C. 30" (76.2 cm) minimum cabinet opening width
D. 12" (30.5 cm) cabinet depth
E. 36" (91.4 cm) base cabinet height
Because Whirlpool Corporation includes a continuous commitment to improve our
products, we reserve the right to change materials and specifications without notice.
A. 7" (17.8 cm) round vent
through roof (purchased
separately) or 31/4" x 10" (8.3 x
25.4 cm) rectangular vent
through the roof (purchased
separately)
B. Roof cap with damper
(purchased separately)
A
B
A. 7" (17.8 cm) round vent
through the wall or out the
top (purchased separately)
or 31/4" x 10" (8.3 x 25.4 cm)
rectangular vent through the
wall or out the top (purchased
separately)
B. Wall cap with damper
(purchased separately)
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Ref. W10848282A
06/03/2016
Download PDF

advertising