Faber | CLAS30SS | Spec Sheet/ Dimensions (PDF) | Faber CLAS30SS Spec Sheet/ Dimensions (PDF)

Faber CLAS30SS Spec Sheet/ Dimensions (PDF)
Decorative Collection
Classica
a brand new value alternative in canopy wall hoods
wall canopy rangehood
traditional styling
600 cfm
2 halogen lights
ductless chimney out of the box
3 speed LED electronic controls
10 minute intensive speed setting
dishwasher safe grease filters
convertible to ductless
(KIT REQUIRED)
° adjustable mounting system
° 6” round duct
°
°
°
°
°
°
°
°
°
Size | Color Old / New Model #
30 Stainless
36 Stainless
New backlit electronic controls with a blue LED light to
indicate the current speed and lighting on/off
CLAS30SS
CLAS36SS
Designed to offer a high-end look without the high-end
price tag, the Classica offers a chimney style rangehood
for the price conscious customer. Traditional styling,
standard features, and solid performance make the
Classica a great value in canopy rangehoods.
a
c
c
e
s
s
o
r
i
e
s
High Ceiling Chimney Kit
CFM Reducer Kit
One 40” upper chimney to replace 15 3/4”
upper chimney that came with the hood
For use in make up air environments where
an under 300 cfm hood is required. This
kit reduces the ducting to 5” round and
reduces the cfm to under 300
CFMRED
Stainless
HIGHCLAS
Ductless Conversion Kit
Includes: Ductless Diverter
• Two Charcoal Filters
Stainless
Replacement Charcoal
Filter
FILTER1
DUCTCLAS
p.o. box 435 • Wayland, MA 01778 • tel: (508) 358-5353 • fax: (508) 358-5730 • e-mail: info@faberonline.com • www.faberonline.com
ductless:
ductless
Dimensional Diagrams & Electrical Knockouts
Pre-Planning Your Installation - Important: Consult the installation instructions before you begin installing this rangehood.
upper
chimney
- ” min
15 3/4 ” max
min & max ceiling height examples
18 1/4”
lower
chimney
10 3/4”
x = 24"
min
7' 5"
max
8' 8 3/4"
canopy
19 3/4”
x = distance from hood to cooktop
x (varies depending on installation)
min - 24”, suggested max - 30”
also consult cooktop
manufacturer's recommendation
36”
cabinet base
x = 26"
min
7' 7"
max
8' 10 3/4"
x = 28"
min
7' 9"
max
9' 3/4"
x = 30"
min
7' 11"
max
9' 2 3/4"
For shorter
ceilings, have
the chimney
cover(s) cut at
a sheet metal
shop. For
higher ceiling
installations, the
High Ceiling
Chimney Kit
includes a
new 39” upper
chimney which
would replace
the 15 3/4”
upper chimney
that came with
the hood.
Note: for ductless installations, subtract 3 1/2" from the
minimum ceiling height
WARNING!
Make your ductrun as
straight and short as
possible. The ductrun
should not exceed 35
equivalent feet if ducted
with the required minimum of 6” round duct.
Count 45º angles as 3
feet, 90º elbows as 5 feet,
and 90º flat elbows as 12
feet.
For best results, use
no more than three 90°
elbows. Make sure that
there is a minimum of
24” of straight duct
between elbows if more
than one is used. Do
not install two elbows
together. If you must
elbow right away, do
it as far away from the
hood’s exhaust opening
as possible.
Rev. 07/11
Product specifications are subject to change without notification. Consult the installation instructions before you begin installing this rangehood.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising