Zephyr | AK7836BS | Duct Cover Manual | Zephyr AK7836BS Duct Cover Manual

Zephyr AK7836BS Duct Cover Manual
AK07xxBS Cypress 12” Duct Cover
Hood Compatibility
AK7836BS
AK7842BS
AK7848BS
AK7854BS
Installation - 12” Duct Cover
Duct Cover
AK0736BS
AK0742BS
AK0748BS
AK0754BS
1. Line up screw holes and attach the left and right side panels to the center
panel with screws provided.
2. Place assembled duct cover on top of hood. Make sure the screw holes of
the center panel are facing down and line up with the holes on top of hood.
3. Attach the duct cover to the top of hood by securing the rest of the screws
to it from within the inside of the hood.
Zephyr Corporation
2277 Harbor Bay Pkwy, Alameda, CA 94502
Tel: 1.888.880.8368 Fax: 1.888.990.8368
e-mail: productsupport@zephyronline.com
DEC15.0101
1
www.zephyronline.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising