Vent-a-Hood | PRH6K36SS | Spec sheet | Vent-A-Hood PRH6K36SS Spec Sheet

Vent-A-Hood PRH6K36SS Spec Sheet
UNDER CABINET SPECIFICATIONS
Model Number: PRH6-K36
Special Notes: This model is not available with heat lamps. This model is available in black, biscuit, gunsmoke, stainless steel, and white. No
customizations.
WIDTH:
36"
DEPTH:
19 1/2"
HEIGHT:
6"
CFM:
250
SONES:
7.4
AMPS:
3.2
# LIGHTS:
The VP521 transition is
available
for top vent applications
at an additional charge.
2
CONNECTION DIAGRAM
REC. MOUNTING HEIGHT*
* Exceeding recommended
mounting height may compromise
performance.
ELECTRICAL/MECHANICAL SPECIFICATIONS FOR BLOWER UNIT
MODEL
VOLTS
AMPS+
HZ
RPM
CFM SP@0.0"
EQUIV CFM$
CFM SP@0.1"
CFM SP@0.2"
CFM SP@0.3"
K250 (Top Vent)
115
2.2
60
1550
250
360
223
220
190
MIN. ROUND
DUCT SIZE
7" (38 sq. in.)
SONES#
7.4
$ Because the Power Lung™ blower uses centrifugal filtration rather than conventional baffle or mesh filters, the Power Lung™ blower can
handle cooking equipment with higher cubic feet per minute (CFM) requirements and can deliver equivalent CFM much more efficiently than other filtration
systems. When comparing the Power Lung™ with other blower units made by other manufacturers, use the "Equivalent CFM".
# Ratings in accordance with the Standard Test Code by the Energy Systems Laboratory of the Texas Engineering Experiment Station.
Specifications Subject To Change Without Notice
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising