Faber INLT28SS600 Spec Sheet

Faber INLT28SS600 Spec Sheet
INCA IN-LIGHT
INSERT RANGE HOOD
INSERT VENTILATION TO PAIR WITH CURRENT KITCHEN TRENDS. An elegant, built in flush mounted range hood with a depth of
11 ¼ making it an ideal choice for shallow depth cabinetry and perfect for kitchen remodeling projects. The sleek stainless steel panel mounts flush for a clean
fully integrated look and can be accented with a liner accessory.
AVAILABLE MODELS
Model #
Size / Color
Motor Class (CFM)
Sound Levels (sones)
INLT28SS600
28 Stainless
600 CFM
2.8 - 7.5 sones
KEY FEATURES
Backlit electronic controls
LED Light Bar
Perimeter Aspiration
Remote Control (INCLUDED)
Backlit electronic controls with a White LED
light to indicate the current speed and two
level lighting
Low consumption 1 watt LED bulbs
Air is forced through narrow slots around
the perimeter of the center panel greatly
improving contaminant extraction.
Control all features of the hood from the
convenience of a wireless remote control
with a dimmer light up your cooking
but use very little energy
INCA IN-LIGHT INSERT RANGE HOOD
SPECIFICATIONS
DIMENSIONS
cut out dimensions
26 9/16" w x 10 1/4" d
convertible to ductless /
recirculating
yes – kit purchase separately
body depth|height
11 1/14" | 12 1/8"
5"7/8
8"11/1
LED light bar
ducting top
6" round
grease filters
dishwasher safe mesh
perimetric filtration system
yes
10 minute intensive speed
yes
15 minute auto shut off
yes
ADA compliant
yes - remote included
power cord included
yes
AC power
400 watts / 3.2 amps
6
Min.2"3/8 - Max.2"3/4
lighting
2"5/8
10"7/16
4 speed electronic w/ white LED
8
22"3/1
/
3"7
9"1/16
controls
6
16
"3/
10
26"9/1
6
27"9/1
6
4
"1/
11
Overall
PERFORMANCE
CFM
SPEED
1
150
2
300
3
450
BOOST
560
Sones
2.8
4.3
6.0
7.5
ACCESSORIES
# CFMRED –
CFM Reducer Kit*
# LINE30ST / LINE36ST –
Stainless Steel Liner 30 & 36"
For use in make up air areas where
an under 300 cfm hood is required.
This kit reduces the ducting to 5”
round and reduces the cfm to under
300.
Create a perfectly-sealed, noncombustible 4” tall perimeter to
“line” the wood below the hood.
Depth adjustable from 16” - 17
7/8” .
# CFMRED2 –
CFM Reducer Kit*
# MUDAMPER6 / MUDAMPER8 –
Universal Make-Up Air Damper
For use in make up air environments
where an under 400 cfm hood is required.
This kit reduces the ducting to 5” round
and reduces the cfm from 600 to under
400.
Satisfies make-up air requirements,
this kit uses an air switch to activate the
make-up air damper to open and bring
fresh air into the home when the hood
fan is on. It then closes tightly when the
hood is off. The CFM level is not reduced
with this accessory.
# FILTER1 –
Charcoal Filter Kit
High quality charcoal filter for use
when recirculating the air back into
the kitchen. Filters out odor and
should be replaced every 6 months
# FILTER1LL –
Long Lasting Charcoal Filter Kit
New washable charcoal filter can be
recharged and washed up to 8 times. For
use when recirculating the air back into
the kitchen. Filters out odor and can last
up to 4 years.
Rev :4/18
Cut Out
30" Liner
# WIREBOX –
Fixed Wiring Box
Replace the power cord with a hard wired
box to power the range hood
36" Liner
WARNING! Product specifications are subject to change without
notification. Consult the installation instructions before you begin
installing this range hood. * Check local make up air codes for
guidelines.
2 Cabot Road Hudson, MA 01749 • TEL: (508) 358-5353 • E-Mail: [email protected] www.faberonline.com
Imagined in Italy
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement