GE Monogram | ZGU36ESLSS | Spec sheet | GE Monogram ZGU36ESLSS Spec Sheet

MONOGRAM 36" GAS COOKTOP
ZGU36ESLSS
OVERALL DIMENSIONS
1 5/16"
36" (91.4)
(3.3)
Cutout
overlap
15/16"
(2.4)
Cutout
overlap
33 7/8" (86.0)
Cutout width
SPECIFICATIONS
19 1/8"
21"
Overall Width
36" (91.4 cm)
Overall Depth
21" (53.3 cm)
Overall Height
7 7/8" (20.0 cm)*
Cut-out Width
33 7/8" (86.0 cm)
Cut-out Depth
19 1/8" (48.6 cm)
Conduit Length
46 1/2" (118.1 cm)
Volts/Hertz/Amps
120 V AC, 60Hz, 15A
Net Weight
59 lbs. (27 kg)*
Approx. Shipping
Weight
83 lbs. (38 kg)
(48.6)
Cutout
depth
(53.3)
TOP VIEW (SHOWING CUTOUT OVERLAP)
*Including cooking grates, but not including griddle accessory
Accessory – Cast Iron Griddle:
Achieve even results with this heavy-duty
cast iron griddle, designed to fit over the
left-side grates.
3 11/16"
(9.4)
Including Screw Depth
4 1/8"
(10.5)
5 15/16"
(15.1)
33 1/2" (85.1)
ATTENTION ELECTRICIAN:
A 120V, 60Hz, 15 Amp circuit is required.
An individual properly grounded branch
circuit or circuit breaker is required. Hard
wired junction box is required for
built-in product.
FRONT VIEW
Front of Cooktop
1 1/8"
(2.9)
14 3/4" (37.5)
18 3/4" (47.6)
SIDE VIEW
For more details refer to the installation
instructions for this product.
ZGU36ESLSS
Dimensions in parentheses are in centimeters unless otherwise noted.
Actual product dimensions may vary due to manufacturing tolerances.
Product Specification Revised 2/18
MONOGRAM 36" GAS COOKTOP
ZGU36ESLSS
NOTES
INSTALLATION
all coverings, countertop and
A W
cabinets surrounding cooktop
must be
able to withstand
NOTES
temperatures of up to 200ºF.
16"
(40.6) max
G
B
E
16"
C
A
18"
(45.7)
min
REAR WALL
(40.6) max
D
7/16"
(1.1) min
4 9/16"
18"
12"
(11.6)
(45.7)
min
(30.5)
REAR WALL
DRAWER
7/16"
(1.1) min
4 9/16"
(11.6)
12"
Gas
supply
line
F
(30.5)
14 3/4"
(37.5) max
drawer depth
(36" models only)
DRAWER
14 3/4"
(37.5) max
drawer depth
(36" models only)
Gas
36 "(91.4) supply
Cabinet base
line
FRONT VIEW
SIDE VIEW
36 "(91.4)
SIDE VIEW
Cabinet base
FRONT VIEW
COUNTERTOP CUT-OUT
DIMENSIONS
Min. Clearance From
Cutout to Rear Wall
Rear Wall
Non-Combustible
3 3/8" (8.6)
Combustible
4 3/8" (11.1)
ADA INSTALLATION
5"(12.7)
Min clearance between the
Min. edge
Clearance
rear
of theFrom
cutout
Rear Wall
Cutout
Rear Wall
and thetonearest
wall
33 7/8" (86.0)
behind the cooktop
Cutout widthH Non-Combustible
3 3/8" (8.6)
Combustible
4 3/8" (11.1)
Min clearance between the
rear edge of the cutout
and the nearest wall
behind the cooktop
19 1/8" (48.6)
Cutout depth
33 7/8" (86.0)
Cutout width
FRONT
19 1/8" (48.6)
Cutout depth
TOP VIEW OF CUTOUT
FRONT
TOP VIEW OF CUTOUT
1 1/2" (3.8) min
Clearance between the
front edge of the cutout
and the front edge of the
countertop
1 1/2" (3.8) min
Clearance between the
front edge of the cutout
and the front edge of the
countertop
5"(12.7)
Allow 5"
minimum
I
depth
between the
countertop
Allow
and 5"
an
minimum
enclosure
depth
between the
countertop
and an
enclosure
SIDE VIEW
SIDE VIEW
ZGU36E_ZGU36R
B M
inimum 30" clearance from
countertop to unprotected
overhead surfaces, when no
ventilation hood or microwave
oven is installed.
C W
hen using a ventilation
hood or microwave oven
above the cooktop, see hood
or microwave installation
instructions for minimum
overhead clearance dimensions.
D M
inimum 18" of clearance
from countertop to nearest
overhead surface on both
sides of cooktop. Make sure to
include any lighting rail covers
in calculation.
E M
inimum 12" distance from
edge of cutout to adjacent side
wall below upper cabinets.
inimum 12" distance from
F M
of countertop to electrical
junction box. Gas supply line
must be 1" distance from rear
wall of cabinet.
aximum 16" depth of
G M
unprotected overhead surfaces,
when no ventilation hood or
microwave oven is installed.
H N
on-Combustible as defined
in the National Fuel Gas
Code (ANSI Z223.1 Current
Edition). Clearances from noncombustible materials are not
part of the ANSI Z21.1 scope
and are not certified by UL.
Clearances less than 4 3/8"
must be approved by local
codes and/or the authority
having jurisdiction.
I F
or Americans with Disabilities
Act (ADA) forward approach
installation: Minimum 5"
clearance between the top
of the countertop and the
enclosure. The enclosure must
be made of at least 1/4" thick
wood material, and must have
an access panel installed in
order to provide access to the
junction box and hold-down
brackets, and to allow for
service of the cooktop.
For more details refer to the
installation instructions for this
product.
ZGU36E_ZGU36R
Dimensions in parentheses are in centimeters unless otherwise noted.
Product Specification Revised 2/18
MONOGRAM 36" GAS COOKTOP
INSTALLATION ABOVE
WALL OVEN
ZGU36ESLSS
A
NOTES
Note this cooktop is only
ANOTES
approved for installation
above specific wall ovens
as labeled on the wall
oven.
ELECTRIC
ELECTRIC
C
Wall
oven
Wall
oven
ELECTRIC
ELECTRIC
Wall
oven
Wall
oven
D
ELEC.
ELEC.
cooktop
cooktop
31
311/4"
1/4"
F
(79.4)
(79.4)min
min
From
Fromtop
top
surface
surfaceofof
countertop
countertop
tototop
top
surface
surfaceofof
wall
walloven
oven
platform
platform
G
B W
arming drawers are
approved for installation
below only certain
specified cooktop
models. See the label
attached to the top of
the warming drawer for
approved combinations.
C R
efer to cooktop
installation instructions.
D M
aintain a minimum
distance of 31-1/4" from
the top surface of the
countertop to the wall
oven platform to ensure
that the cooktop and
wall oven do not interfere
with each other (see
picture).
D
E
443/4"
3/4"
(12.1)
(12.1)
SIDE
SIDEVIEW
VIEW
INSTALLATION ABOVE
WARMING DRAWER
FRONT
FRONTVIEW
VIEW
he cooktop platform
E T
must be a minimum
height of 4-3/4" from the
floor to ensure that the
handle does not hit the
floor when the door is
open.
B
unction box location
F J
for wall oven (may also
be located in adjacent
cabinet).
H
5 1/2"
5(14.0)
1/2"
(14.0)
ELEC.
ELEC.
cooktop
cooktop
G
SIDE VIEW
SIDE VIEW
FRONT VIEW
FRONT VIEW
For more details, refer to the installation
ZGU36E_ZGU36R
instructions for this product on Monogram.com.
ZGU36E_ZGU36R
Dimensions
in parentheses are in centimeters
lectrical connection for
G E
cooktop must be located
in an accessible adjacent
location to the right
(may also be located in
adjacent cabinet).
hen installing the
H W
cooktop above a
warming drawer, a solid
barrier must be installed
at least 5-1/2" from the
top of the countertop.
Use any solid material
such as 1/4" thick
plywood. Allow at least
a 2" air gap between the
front of the barrier and
the inside of the cabinet
and at least 1/4" air gap
between the barrier and
the top of the warming
drawer.
For more details refer to the
installation instructions for this
product
unless otherwise noted.
Product Specification Revised 2/18
MONOGRAM 36" GAS COOKTOP
ZGU36ESLSS
FEATURES AND BENEFITS
PRECISION KNOBS
With embedded sapphire glass illuminate each knob
making it easy to view and select heat settings
BRASS BURNERS ACCENTS
For the ultimate in elegant styling
ELECTRONIC KITCHEN TIMER
Built in to cooktop for meal preparation
DUAL FLAME STACKED BURNERS
Provide 140F simmer-to-rapid-boil flexibility on all burners;
the burners are sealed to the cooktop for easy cleaning
TRI-RING BURNER
Versatile burner creates 20,000 BTUs of intense heat,
perfect for searing, frying and sautéing
HIGH OUTPUT COOKING
Delivered by a 20,000 BTU tried-ring burner, total of
62,000 BTUs
REMOTE CONNECTIVITY VIA WIFI
Allows you to wirelessly control gas cooktop functions
from your smartphone
HEAVY DUTY CAST IRON GRIDDLE
Designed to fit the Monogram gas cooktop
Product Specification Revised 2/18
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertising