Jenn-Air | JED4536GB | Dimensions Guide | Jenn-Air JED4536GB Dimensions Guide

JENN-AIR® DETAILED PLANNING DIMENSIONS
1 of 4
36" JX3™ ELECTRIC RADIANT DOWNDRAFT COOKTOP WITH ELECTRONIC TOUCH CONTROL
JED4536G – 365⁄16" x 1759⁄64" x 23"
A
PRODUCT DIMENSIONS
A
MODEL #
JED4536G
B
in
cm
Overall width
Euro-Style Stainless
365⁄16
92.3
Floating Glass
36 ⁄16
92.3
23
58.5
Floating Glass
22 ⁄16
56.0
C
Width of cooktop base
34 ⁄4
87.0
D
Width of assembled blower motor and plenum
14 ⁄64
36.7
E
Height from blower motor to underside
of cooktop
1759⁄64
45.5
F
Width from left side of cooktop base to
blower motor
8
20.3
1113⁄16
30.0
3
3 ⁄4
9.5
71⁄8
18.1
⁄4
0.6
2053⁄64
52.9
16 ⁄64
41.7
A
B
B
TOP VIEW
A
J
C
H
A
E
J
C
H
F
I
G
H
I
J
K
I
L
5
Overall depth
Euro-Style Stainless
1
1
Width from plenum to rightB side of cooktop base
K
Height of cooktop base
Height from electrical housing to underside
I
of cooktop
B
K
L
Thickness of cooktop surface
Depth of cooktop base
Height fromI plenum to underside of cooktop
L
E
G
D
29
1
E
27
E
F VIEW
FRONT
G
D
B
K
I
L
E
SIDE VIEW
IMPORTANT: Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation or Use & Care Guide
before selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air® appliances are appropriately UL, CUL or CSA approved.
8986AdZw217
JENN-AIR® DETAILED PLANNING DIMENSIONS
2 of 4
36" JX3™ ELECTRIC RADIANT DOWNDRAFT COOKTOP WITH ELECTRONIC TOUCH CONTROL
JED4536G – 365⁄16" x 1759⁄64" x 23"
OPENING/CLEARANCE DIMENSIONS
MODEL #
Width of combustible area above
cooking surface (min.)
Width from cooktop to fixed wall
B
or other combustible material (min.)
Width to center of vent opening option (min.)
C
Width to outer
edge of outlet (min.)
D
Side
Height toCabinet
bottom of uncovered wood or
E*
metal cabinet above cooking surface (min.)
J
Height to bottom of uncovered wood
F
or metal cabinet (min.)
Height to center
G
K of vent opening option
Height to top edge of outlet (min.)
H
I** Depth to center of vent opening option
Depth of upper cabinet (recommended)
J
Depth from cutout to wall (min.)
K
Width of cutout
L
M Depth of cutout
Depth from cutout to front of countertop (min.)
N
e
Recommended electrical access location
Recommended venting location –
v
see page 3-4 for ducting information
A
A
E*
F
B
B
G
H
e
v
D
C
I**
v
C
JED4536G
in
cm
36
91.4
21⁄2
6.4
11
14 ⁄16
10
37.3
25.4
30
76.2
18
45.7
1313⁄16
12
1617⁄64
13
11⁄2
349⁄16
211⁄8
2
35.1
30.5
41.3
33.0
3.8
87.8
53.7
5.1
*Dimension can be reduced by 6" (15.2 cm) when bottom of wood or metal cabinet
is covered by not less than 1⁄4" (0.6 cm) flame retardant millboard covered with not
less than No. 28 MSG sheet metal, 0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm)
aluminum or 0.020" (0.5 mm) copper.
**Based on installation in a 24" (61.0 cm) deep by 341⁄2" (87.6 cm) high base
cabinet with a 11⁄2" (3.8 cm) thick counter top.
FRONT VIEW
ELECTRICAL REQUIREMENTS
220 volt, 60 Hz, AC only, 40-amp fused, electrical circuit is required. A dedicated
circuit is recommended.
VENTING REQUIREMENTS
This cooktop must be exhausted outdoors unless using the duct-free filter kit
(JDA7000WX). Refer to kit instructions for further information.
LOCATION REQUIREMENTS
• To ensure cooktop base clearance, cabinet side walls need to be wider than the cutout.
•A
minimum clearance of 6" (15.2 cm) is recommended between the side of the
cooktop and side wall for maximum ventilation performance.
•A
minimum clearance of 2" (5.1 cm) is recommended between the blower motor
E*
and cabinet for proper cooling. A 6" (15.2 cm) clearance is recommended for
servicing access.
• An under counter built-in oven cannot be installed under this cooktop.
Side
Cabinet
J
F
K
B
L
K
G
M
C
I**
v
N
TOP VIEW – CUTOUT
IMPORTANT: Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation or Use & Care Guide
before selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air® appliances are appropriately UL, CUL or CSA approved.
H
e
v
SIDE VIEW
A
C
8986AdZw217
JENN-AIR® DETAILED PLANNING DIMENSIONS
3 of 4
DUCT-FREE KIT
JDA7000WX – 175⁄8" x 103⁄8" x 71⁄2"
JX3™ DOWNDRAFT COOKTOPS WITH DUCT-FREE VENTILATION
The duct-free filter kit (JDA7000WX) is approved for use with JX3™ downdraft cooktop models
JGD3536G, JGD3430G, JED4536G, JED3536G, JED4430G and JED3430G. The kit filters the air
from the downdraft system and ventilates the conditioned air into the room through the toe kick
of the base cabinet. Do not ventilate the air from the downdraft system into the base cabinet,
base cabinet pedestal, crawl space, wall or attic.
PRODUCT DIMENSIONS
MODEL #
B
A
B
A
JDA7000WX
in
cm
A
Width of housing
17 ⁄8
44.7
5
B
Height of housing
10 ⁄8
26.5
C
Depth of housing
71⁄2
19.0
D
Minimum height of toe kick
3
7.6
E
Minimum depth to toe kick
2 ⁄2
6.4
3
1
EXHAUST CUTOUT LOCATION
The cutout location in the toe kick area of the cabinet floor is
dependent upon the dimensions of the cooktop and base cabinet.
FRONT VIEW
C
D
Airflow
Floor
C
E
SIDE VIEW
D
Airflow
E
Floor
IMPORTANT: Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation or Use & Care Guide
before selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air® appliances are appropriately UL, CUL or CSA approved.
8986AdZw217
JENN-AIR® DETAILED PLANNING DIMENSIONS
4 of 4
DOWNDRAFT COOKTOP DUCTING ARRANGEMENTS
The diagrams below show typical duct arrangements for downdraft cooktops. JX3™ downdraft cooktops
also offer a duct-free installation option. For more details, refer to page 3.
DUCTING CONFIGURATIONS
Roof jack
31⁄4" x 10"
(8.3 cm x 25.4 cm) duct –
54' (16.5 m) max.
DUCTING REQUIREMENTS
COOKTOP
Gas
DUCT LENGTH
DUCT SIZE
10' (3.0 m) or less*
5" (12.7 cm)
diameter*
Between 10' (3.0 m)
and 60' (18.3 m)
10' (3.0 m) or less**
Electric
Transition elbow
Between 10' (3.0 m)
and 60' (18.3 m)
6" (15.2 cm)
diameter
31⁄4" x 10"
(8.3 cm x 25.4 cm)
5" (12.7 cm)
diameter**
6" (15.2 cm)
diameter
31⁄4" x 10"
(8.3 cm x 25.4 cm)
*Gas cooktops must use 5" (12.7 cm) diameter for runs of 10' (3.0 m) or less.
**May be used to vent straight out the back of the cooktop and directly through
the wall.
CALCULATING MAXIMUM DUCTING LENGTH
REAR DUCTING IN WALL TO ROOF
•M
aximum ducting length is 60' (18.3 m).
•E
ach 90° elbow equals 5' (1.5 m) duct.
•U
se no more than three 90° elbows.
• F lexible metal vent is not recommended.
• Do not install two elbows together.
NOTES:
• F or ducting runs up to 30' (9.1 m), install cooktop as shipped.
• F or ducting runs of 31' (9.4 m) to 60' (15.2 cm), remove the restricter
ring on the blower inlet housing.
• F or altitudes above 4500' (1272.0 m), reduce recommended vent run
by 20% for best performance.
REAR DUCTING THROUGH WALL TO OUTSIDE
6" (15.2 cm) diameter duct –
511⁄2' (15.7 m) max.
5" (12.7 cm ) to 6" (15.2 cm)
diameter transition
31⁄4" x 10"
(8.3 cm x 25.4 cm) duct
Transition elbow
SIDE DUCTING IN TOE KICK TO OUTSIDE
6" (15.2 cm)
diameter wall cap
6" (15.2 cm)
diameter elbow
THROUGH FLOOR BETWEEN JOISTS TO OUTSIDE
IMPORTANT: Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation or Use & Care Guide
before selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air® appliances are appropriately UL, CUL or CSA approved.
8986AdZw217
Download PDF

advertising