Jenn-Air | JEF3115GS | Dimension Guide | Jenn-Air JEF3115GS Dimension Guide

Jenn-Air JEF3115GS Dimension Guide
JENN-AIR DETAILED PLANNING DIMENSIONS
®
1 of 2
15" MODULAR ELECTRIC GRIDDLE
JEF3115G – 15" x 513⁄32" x 21"
PRODUCT DIMENSIONS
MODEL #
A
A
A
B
TOP VIEW
FRONT VIEW
cm
Overall width
15
38.1
B
Overall depth
21
53.3
C
Center of cooktop to center of
electrical conduit
539⁄64
14.2
1419⁄64
36.3
513⁄32
13.7
E
Height from electrical conduit to
underside of cooktop
F
Thickness of cooktop surface
11⁄4
3.2
G
Height from underside of cooktop base
to top of control knob
51⁄2
14.0
H
Depth of cooktop base
2019⁄64
51.6
I
Height of cooktop base
1
4 ⁄4
10.8
J
Height from bottom of electrical
conduit to underside of cooktop base
11⁄4
3.2
*Measured from tab to tab. Tabs should not be bent during installation.
F
F
E
E
D*
D*
in
A
D* Width of cooktop base
B
B
JEF3115G
F
E
C
C
C
D*
B
B
B
G
G
G
I
I
H
H
H
J
J
I
J
SIDE VIEW
IMPORTANT: Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation Guide before
selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air® appliances are appropriately UL, CUL or CSA approved.
8997AdZw217
JENN-AIR DETAILED PLANNING DIMENSIONS
®
2 of 2
15" MODULAR ELECTRIC GRIDDLE
JEF3115G – 15" x 513⁄32" x 21"
OPENING/CLEARANCE DIMENSIONS
MODEL #
A
B
A
D*
E
B
B
F
e
C
JEF3115G
in
cm
Width of combustible area above
cooking surface (min.)
Width from cooktop to fixed wall or
Side
other combustible
material (min.)
Cabinet
15
38.1
6
15.2
C
Width to outer edge of outlet (max.)
9
23.0
D*
Height to bottom of uncovered wood or
G above cooking surface (min.)
metal cabinet
30
76.2
E
Height to bottom of uncovered wood or
metal cabinet (min.)
H
18
45.7
F
Height to top edge of outlet (min.)
7
17.8
G
Depth of upper cabinet
13
33.0
H
Depth from cutout to wall (min.)
25 ⁄8
6.7
I
Width of cutout (recommended)
14 ⁄8
36.5
J
Depth of cutout (recommended)
203 ⁄8
51.8
K
e
Depth from cutout to front of countertop
25⁄16
5.9
3
Recommended electrical access location
*Dimension can be reduced by 6" (15.2 cm) when bottom of wood or metal
cabinet is covered by not less than 1⁄4" (0.6 cm) flame retardant millboard
covered with not less than No. 28 MSG sheet metal, 0.015" (0.4 mm)
stainless steel, 0.024" (0.6 mm) aluminum or 0.020" (0.5 mm) copper.
If installing a hood or microwave hood combination above the cooktop,
follow the hood or microwave hood combination instructions for
dimensional clearances above the cooking surface.
FRONT VIEW
ELECTRICAL REQUIREMENTS
A 240 Volt, 60 Hz, AC only 15-amp fused, grounded electrical circuit is
required. A time-delayed fuse or dedicated circuit is recommended.
A grounded 3-prong outlet should be located in the back of the cabinet.
Do not use an extension cord.
LOCATION REQUIREMENTS
• To
ensure cooktop base clearance, cabinet side walls need to be wider
than the cutout
• If cabinet has a drawer, allow a 51⁄2" (14.0 cm) minimum clearance
between countertop and top of drawer.
Side
Cabinet
G
A
D*
H
B
I
H
F
J
K
SIDE VIEW
TOP VIEW
IMPORTANT: Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation Guide before
selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air® appliances are appropriately UL, CUL or CSA approved.
8997AdZw217
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising