Glass Canopy Island Hood RH36PC60GS 36" GLASS CANOPY ISLAND HOOD FEATURES Nominal Width Installation Type Style Air Discharge Air Delivery (CFM) Blower Type Electronic Controls with LCD Display Fan Speeds Sound Level (dBA) Quad Halogen Lights Washable Stainless Steel Filters Exhaust Duct Duct Required 36" Island / Peninsula Ceiling Mount Stainless Steel / Glass Canopy Vertical 600 Dual Centrifugal Yes 4 73.8 Yes Yes Convertible* 8" Round ACCESSORIES Duct-Free Kit – PN # RHDFP60GS Optional SPECIFICATIONS Overall Exterior Dimensions – Width Height (With One Cover) (With Flue Extension) Glass Canopy Design Sophisticated style makes this ventilation unit as attractive as it is functional. Glass canopy hood has sleek curved design – making it a focal point of the kitchen. Depth Voltage Rating Connected Load (kW Rating) @ 120 Volts ‡ Shipping Weight (Approx.) Sones Rating 35-7/8" 28" min. 35" min. 57" max. 25-3/16" 120V / 60 Hz / 15A 0.516 87 Lbs. 9.9 * Ventilation is convertible to be either ducted outside, or recirculated inside requiring no ducting. (Recirculated option requires use of optional Duct-Free Kit.) ‡ For use on adequately wired 120V, dedicated circuit having 2-wire service with a separate ground wire. Appliance must be grounded for safe operation. NOTE: Always consult local and national electric codes. Check local building codes for installation requirements, as they may very per locale. Refer to Product Installation Guide for detailed installation instructions on the web at www.electroluxicon.com. Specifications subject to change. 600 CFMs / 4-Speed Fan Features a powerful 4-speed dual centrifugal fan supplying 600 CFM of air movement. Effectively and quietly removes smoke, vapors and smells from the kitchen. Quad Halogen Lights Island cooking surface area is brightly lit by quad halogen lights, paired in groups of two and set at two separate levels. Electronic Controls with LCD Display Easy-to-operate electronic controls provide convenient access to all fan, clock and timer settings. electroluxicon.com Glass Canopy Island Hood RH36PC60GS 12 1/8" PRE-INSTALLATION CALCULATIONS S H A K P Counter Height 36" standard C 13 3/16" K = Kitchen height C = Counter height P = Preferred height of hood bottom above counter (24"- 30" allowed, NOT more than 36" recommended) A = Canopy height H = Hood height for installation H = K-C-P S = Chimney structure height for installation S = H-A 35" min. 57" max. Dimensions from base of hood to ceiling, and include clearance required for installation. 2 11/16" 28" ( min. height with one cover) Top Wiring box 35 7/8" Air outlet 7 7/8" diam. 25 3/16" Controls 36" Glass Canopy Island Hood Specifications • Product Weight – 84 Lbs. Ceiling-Mount Installation • Ventilation system is preset to exhaust air outside. If outside ducting is not possible, optional Duct-Free Kit (PN # RHDFP60GS) is available to convert ventilation to allow air to recirculate inside. (Refer to Ducted Option Specifications for outside ventilation.) • Sones Rating – 9.9 • Voltage Rating – 120V / 60 Hz / 15 Amps • Connected Load (kW Rating) @ 120 Volts = 0.516 kW (For use on adequately wired 120V, dedicated circuit having 2-wire service with a separate ground wire. Appliance must be grounded for safe operation.) • Amps @ 120 Volts = 4.16 Amps • Always consult local and national electric codes. Check local building codes for installation requirements, as they may vary per locale. • Minimum installation height allowed from bottom of hood to cooking surface is 24" - 30" for electric and 30" for gas. (NOT more than 36" recommended.) • To prepare mounting surface, adequate structure and support must be provided, capable of supporting 150 lbs. • Use Ducted Option Specifications Optional Accessories • For • Duct-Free • Island / Peninsula outside ventilation. • Exhaust Duct Required – 8" round • For most efficient airflow exhaust, use a straight run or as few elbows as possible. metallic flex ducting only to connect rigid duct directly to transitions (if allowed by code). • Thermal breaks such as short section of nonmetallic duct, should be used in areas of extreme cold. • Cold weather installations should have additional backdraft damper installed. • Refer to installation instructions on web for detailed exhaust duct preparation and converting vent blower system for recirculating inside. Pre-Installation Calculations • Select hood preference height (P) that is comfortable for user (24" - 30" minimum allowed, NOT more than 36" recommended). • Calculate hood height (H) for installation (H = K-C-P). • Confirm that (H) is within minimum to maximum range for hood. If not, adjust installation. • Calculate chimney structure height (S). Use formulas, check dimensions of hood. Save calculation for use later in installation. Note: For planning purposes only. Refer to Product Installation Guide on the web at electroluxicon.com for detailed instructions. Kit – (PN # RHDFP60GS). Electrolux Major Appliances, N.A. USA • 250 Bobby Jones Expressway • Augusta, GA 30907 • 1-877-4electrolux (1-877-435-3287) • electroluxicon.com CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • electroluxicon.ca RH36PC60GS 10/09 © 2009 Electrolux Home Products, Inc. High standards of quality at Electrolux Home Products, Inc. mean we are constantly working to improve our products. We reserve the right to change specifications or discontinue models without notice. Printed in the U.S.A.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project