Jenn-Air | JXL6536CSS | Dimension Guide | Jenn-Air JXL6536CSS Dimension Guide

JENN-AIR DETAILED PLANNING DIMENSIONS
®
1 of 2
36" CUSTOM HOOD LINER
JXL6536CSS – 357⁄8" x 111⁄2" x 22"
PRODUCT DIMENSIONS
A
A
A
E
C
D
JXL6536CSS
in
cm
Width of upper portion of hood liner
27 ⁄8
70.1
B
Overall width
35 ⁄8
91.1
C
Overall width with extension panel kit
36" to 42" extension panel kit*
36" to 48" extension panel kit**
417⁄8
477⁄8
106.4
121.6
D
Height from hood liner to hood
support
51⁄16
12.8
E
Overall height
111⁄2
29.2
F
F
Depth of upper portion of hood liner
3
12 ⁄8
31.4
F
G
Overall depth
22
55.9
H
Vent collar diameter
10
25.4
E
D
C
B
C
FRONT VIEW
F
MODEL #
A
D
B
B
E
5
7
*Requires optional 36" to 42" extension panel kit – W10646268.
**Requires optional 36" to 48" extension panel kit – W10646269.
G
G
G
SIDE VIEW
H
H
G
G
H
B
B
TOP VIEW
G
C
B
C
C
IMPORTANT: Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation Guide before
selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air® appliances are appropriately UL, CUL or CSA approved.
8562EdZw815
JENN-AIR DETAILED PLANNING DIMENSIONS
®
2 of 2
36" CUSTOM HOOD LINER
JXL6536CSS – 357⁄8" x 111⁄2" x 22"
OPENING/CLEARANCE DIMENSIONS
A
G
v
Centerline of
Hood Support
v
H
E
B
e
F
CUTOUT VIEW
C
D
ELECTRICAL REQUIREMENTS
120 volt, 60 Hz, AC only, 15-amp fused, electrical circuit is required.
VENTING REQUIREMENTS
An internal or in-line (external) blower motor system is required.
The hood is factory set for venting through the roof or wall.
Do not terminate the vent in an attic or other enclosed area.
LOCATION REQUIREMENTS
Custom built enclosure with hood liner support. Hood support must be
able to support 75 lb (34.0 kg).
FRONT VIEW
MODEL #
A
B
C
D
E
F
G
H
e
v
Width of vent entry location – ceiling option (min.-max.)
G
Width of vent entry location – wall option (min.-max.)
Width of cabinet opening – hood liner only (min.)
Width of cabinet opening – hood liner plus 36" to 42" extension panel kit* (min.)
Width of cabinetCenterline
opening
H liner plus 36" to 48" extension panel kit** (min.)
of – hood
Hood Support
Suggested distance
from hood to electric cooking surface (min.-max.)
Suggested distance from hood to gas cooking surface (min.-max.)
E
Distance from centerline
to cutout for hood liner
F
Width of cutout for hood liner
Depth from cutout to wall
Depth of cutout for hood liner
Terminal box location
Recommended vent entry location
JXL6536CSS
in
10
10
36
42
48
24-36
30-36
14
28
41⁄2
13
cm
25.4
25.4
91.4
106.7
121.9
61.0-91.4
76.2-91.4
35.5
71.1
11.4
33.0
*Requires optional 36" to 42" extension panel kit – W10646268.
**Requires optional 36" to 48" extension panel kit – W10646269.
IMPORTANT: Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation Guide before
selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air® appliances are appropriately UL, CUL or CSA approved.
8562EdZw815
Download PDF

advertising