Dacor | MRV36ERS | Range Trim Kit Installation Instructions | Dacor MRV36ERS Range Trim Kit Installation Instructions

Dacor MRV36ERS Range Trim Kit Installation Instructions
RANGE MODELS: DR30EIS, DR30EIFS, RNR30NIS,
RNR30NIFS, RR30NIS, RR30NIFS
Downdraft Vent Trim Kit,
P/N ATKR30SR
INSTALLATION
INSTRUCTIONS
Parts included with this kit:
3 Hex Screws PN 83023
Rear Trim Piece PN 107324
Introduction:
The DR30EI[F]S, RNR30NI[F]S and RR30NI[F]S ranges require a rear trim piece for installations
with a downdraft vent. The trim piece attaches to the back of the range and covers the front of the
downdraft vent chassis when the range is slid into position.
Instructions:
Install the rear trim piece as shown using the three hex screws included with the kit. The screws
thread into the pre-drilled holes on the back of the range.
Trim Installation
(Range style varies with model)
Trim Installed
Part No. 107333 Rev. B
Dacor ● 14425 Clark Avenue, City of Industry, CA 91745 ● Phone: (800) 793-0093 ● Fax: (626) 403-3130 ● www.dacor.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising