Miele | 28262055USA | DA 2620 Specification Sheet | Miele 28262055USA DA 2620 Specification Sheet

46” Extra-Slim Insert Hood
DA 2620 Stainless Steel
8mieleusa.com
Specification Sheets TRS 06122017
46” Extra-Slim Insert Hood
DA 2620 Stainless Steel
SPECIFICATIONS
DA 2620 — Item 28262055USA
DA 2620
Features:
Overall Unit Width
467/16” (1180 mm)
Overall Unit Height
131/2” (342 mm)
Overall Unit Depth
119/16” (293 mm)
Built-In
• Extra slim insert fits in less than 12”
upper cabinetry
Minimum Opening Width
457/8” (1165 mm)
Minimum Opening Depth
107/8” (276 mm)
• Vented or recirculating
Minimum Opening Height
125/8” (320 mm)
• 3 LED ClearView lights
Fan
• 3 fan settings plus intensive level
Fan Speeds
4
• Removable, dishwasher-safe panel
and grease filters
Maximum CFM
• Con@ctivity 2.0 - communication
between hood and cooktop
625 CFM, (Reducing Collar is available to
reduce air flow to less than 400 CFM, more
information on page 7)
Duct
• Fully integrated, controlled manually
via Con@ctivity 2.0 or via remote
control (optional acessory)
Electrical
• Clear Cover
• Filter saturation indicator
• Delayed shutdown (5-15 minutes)
Duct Diameter
6” (150 mm)
Electrical Requirements
120V, 60Hz, 15A
Power Cord
Molded NEMA 5-15 plug, 2.5 ft (0.75 m)
Shipping
Shipping Weight
33 lbs (15 lbs)
Shipping Dimensions
495/8” W x 16” H x 181/8” D
Support
Call Miele
800.843.7231
Miele Website
8www.mieleusa.com
20/20 Link
82020technologies.com
Optional Accessories:
DUU 150
DUU 151
DKF19-1
Reducing collar
DARC 6
Recirculation kit
Recirculation kit
OdorFree Charcoal filter
required accessory for
recirculation mode
Reducing collar limits air
flow to less than 400 CFM
Remote control
DA 2620 Stainless Steel
Page 2 of 7
Specification Sheets TRS 06122017
46” Extra-Slim Insert Hood
DA 2620 Stainless Steel
INSTALLATION SPECIFICATIONS
Product Details
Niche/Cutout Details
DA 2620 Stainless Steel
Page 3 of 7
Specification Sheets TRS 06122017
46” Extra-Slim Insert Hood
DA 2620 Stainless Steel
INSTALLATION SPECIFICATIONS
Distance Between Cooktop and
Ventilation Hood (S)
DA 2620 Stainless Steel
Page 4 of 7
Specification Sheets TRS 06122017
46” Extra-Slim Insert Hood
DA 2620 Stainless Steel
Recirculation Kit DUU 150
(Optional Accessory)
DA 2620 Stainless Steel
Page 5 of 7
Specification Sheets TRS 06122017
46” Extra-Slim Insert Hood
DA 2620 Stainless Steel
Recirculation Kit DUU 151
(Optional Accessory)
DA 2620 Stainless Steel
Page 6 of 7
Specification Sheets TRS 06122017
46” Extra-Slim Insert Hood
DA 2620 Stainless Steel
R2000
(optional accessory)
If you would like to reduce the enviromental impact of your ventilation
system by limiting the CFM output the Reducing Collar can be installed.
It reduces the air flow to less than 400 CFM. Check local building codes
for maximum CFM requirements.
DA 2620 Stainless Steel
Page 7 of 7
Specification Sheets TRS 06122017
Download PDF

advertising