Summit | SMSEH2624 | SEH2636 SEH2624manual2170.pdf | Summit SMSEH2624 SEH2636 SEH2624manual2170.pdf

Summit SMSEH2624 SEH2636 SEH2624manual2170.pdf
RANGE HOODS
Models
SEH2636
SEH2624
FELIX STORCH, INC.
770 Garrison Avenue
Bronx, New York 10474
www.summitappliance.com
TABLE OF CONTENTS
Safety Warnings................................................................................................2-4
Location of Parts..................................................................................................5
Technical Specifications......................................................................................6
Dimensional Diagram...........................................................................................7
Installation........................................................................................................8-11
Positioning the Range Hood......................................................................8
Preparing the Site...................................................................................8-9
Installing Mounting Brackets......................................................................9
Installing the Range Hood on the Wall................................................10-11
Operation.............................................................................................................12
Speed Choice
Lighting
Efficient Ventilation
Cleaning and Maintenance............................................................................13-14
Carbon Filter Replacement......................................................................13
Replacement of Lighting Components.....................................................14
Moving the Hood......................................................................................14
Troubleshooting..................................................................................................15
Troubleshooting Guide
Service and Spare Parts
Exploded View(For 24" Model)...............................................................................16
Parts List(For 24" Model).......................................................................................17
Exploded View(For 36" Model)...............................................................................18
Parts List(For 36" Model).......................................................................................19
Wiring Diagram....................................................................................................20
Limited Warranty.................................................................................................21
LIMITED WARRANTY
SUMMIT Appliance warrants this product to be free from defects in
materials and workmanship for a period of one year from the date of original
purchase or delivery. Any parts determined to be defective will be replaced
by SUMMIT at no charge to you. Plastic parts, liners, and outer cabinets are
warranted to be manufactured to commercially acceptable standards and
free from defects at the time of delivery.
This limited warranty does not apply to:
1. Improper installation
2. Customer misuse, negligence or damage
3. Incorrect electrical current
4. Products with serial number altered or removed
5. Products sold or used outside the fifty United States or District of
Columbia
6. Commercial or industrial users
7. Damage to this product from accidents, alterations, failure to
follow instructions, fire, floods, earthquakes, war, civil disturbance
or Acts of God.
SUMMIT is not liable for consequential or incidental damage.
DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES
CUSTOMER'S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY
SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN. IMPLIED WARRANTIES,
INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, ARE LIMITED TO ONE YEAR. WARRANTOR SHALL NOT BE LIABLE FOR
INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR
LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES OF MERCHANTABILITY
OR FITNESS, SO THESE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU. THIS
WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER
RIGHTS, WHICH VARY FROM STATE TO STATE.
FELIX STORCH, INC.
Summit Appliance Division
770 Garrison Avenue
Bronx, NY 10474
Phone: (718) 893-3900
Fax: (718) 842-3093
www.summitappliance.com
SAFETY WARNINGS
a. This product is designed for domestic use.
b. Electric input for the device must be 110-120 Volt, 60 Hz.
c. A grounded cable is installed in your device. It must be connected to a grounded
electrical socket.
d. All of the electrical installation must be done by a qualified electrician.
Installations done by unqualified persons may result in poor performance, failure
of the device, and accidents.
e. Do not let the power cord become pinched or squeezed during installation. Keep
the cord away from cooking surfaces; otherwise, the cord could melt and fire could
result.
f. Do not connect the power cord before installation is complete.
g. If the lights in your device have been on for a long time, do not touch them. They
are hot enough to burn your hands.
h. Kitchen hoods are designed for cooking in domestic residences. There is a risk of
failure if they are used for other purposes, and this will void the warranty.
i. Comply with local codes and regulations related to discharging air. (This warning
does not apply to hoods with no stack).
j. Do not cook flammable foods below the hood.
k. Start the hood after placing pots or pans on your cooking surface. Otherwise, high
temperatures may result in deformation of parts of the hood.
l. Do not leave hot oil on the cooking surface. Pots that contain hot oil can ignite,
causing fires.
m. When frying foods, be watchful of curtains. They may catch fire.
n. Change the filters regularly. Oily residues could become fire risks.
o. When replacing filters, always use the same type of filter as the original.
Substitutes may be unsuitable.
p. Do not use the device without a filter. Do not remove filters while the device is
working.
q. If there is ignition or sparking, cut off the electric power to the device. (Turn off the
switch.)
r.
s.
If the device is not cleaned regularly, built-up grime and dirt could cause a fire.
When you make the stack installation for your hood, use 150 mm (5.9") diameter
pipes. The stack installation must be as short and with as few bends as possible.
t.
For parts and accessory ordering,
troubleshooting and helpful hints, visit:
www.summitapplianceparts.com
21
Keep the packing materials away from children, as these materials could be
dangerous to them.
u. Ensure that children do not play with the device. Do not let little children use the
device.
2
WIRING DIAGRAM
v.
If the electrical cable is defective, it must be changed by the manufacturer or a
qualified service technician.
w. If there is a fire, cut off the power to the hood and cooking devices and cover
the flame. Do not use water to extinguish the fire.
CAPASITOR
READ AND SAVE THESE INSTRUCTIONS
WARNING! TO REDUCE THE RISK OF A RANGE-TOP GREASE FIRE:
a. Never leave surface units unattended at high settings. Boilovers cause
smoking and greasy spillovers that may ignite. Heat oils slowly on low or
medium settings.
b. Always turn hood ON when cooking at high heat or when flambéing food.
c. Clean ventilating fans frequently. Grease should not be allowed to accumulate
on fan or ?lters.
d. Use proper pan size. Always use cookware appropriate for the size of the
surface element.
Motor: 340W / Lamp: 2X50W
Input :110V AC 60 Hz
BROWN
RED
BLUE
BLACK
BROWN
WHITE
CONTROL PANEL
BLUE
BLUE
WHITE
RED
BLACK ( L )
BLACK
WHITE ( N )
WHITE
GREEN/YELLOW
WHITE
WHITE
Lamp 2x50W
WARNING! TO REDUCE THE RISK OF INJURY TO PERSONS IN THE EVENT
OF A RANGE-TOP GREASE FIRE, OBSERVE THE FOLLOWING:
a. SMOTHER FLAMES with a close-?tting lid, cookie sheet or metal tray, then
turn off the burner. BE CAREFUL TO PREVENT BURNS. If the flames do
not go out immediately, EVACUATE AND CALL THE FIRE DEPARTMENT.
b. NEVER PICK UP A FLAMING PAN – you may be burned.
c. DO NOT USE WATER, including wet dishcloths or towels, to douse the fire –
a violent steam explosion could result.
d. Use an extinguisher ONLY if:
1. You know you have a Class ABC extinguisher, and you already know
how to operate it.
2. The ?re is small and contained in the area where it started.
3. The ?re department is being called.
4. You can fight the fire with your back to an exit.
WARNING! TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR OTHER
INJURY, OBSERVE THE FOLLOWING:
3
20
SEH2636
Model
Model No 2170.9.579.01
Pos.
Part No.
Spare Part
1
2
YT971.1000.22
CARBON FILTER
YT142.3150.06
ALUMINUM CASSETTE FILTER
3
YT207.1000.35
4
YT201.1000.22
CABLE FIXER(FOR CHIMNEY HOOD)
CIRCUIT BOX COVER
5
YT201.1000.24
6
YT202.1000.16
7
8
YT460.1000.16
YT403.1000.10
9
YT404.1000.24
10
YT455.2120.01
YT458.2120.04
11
12
CIRCUIT BOX
METAL VALVE
BLOWER
HALOGEN LAMP-50W
POWER SUPPLY CORD
LAMP HOLDER GROUP
SLIDER BUTTON
a. Use this unit only in the manner intended by the manufacturer. If you have
questions, contact the manufacturer.
b. Before servicing or cleaning the unit, switch power off at the service panel and
lock the service-disconnecting means to prevent power from being switched on
accidentally. If the service-disconnecting means cannot be locked, securely
fasten a prominent warning device, such as a tag, to the service panel.
c. To reduce the risk of fire or electric shock, do not use this fan with any solidstate speed control device.
CAUTION:
a. The fan in this device is for general ventilating use only. Do not use to exhaust
hazardous or explosive materials and vapors.
b. To reduce the risk of fire and to properly exhaust air, be sure to duct air outside.
Do not vent exhaust air into spaces within wall, ceilings, attics, crawl spaces or
garages.
c. Use only metal duct work.
13
YT402.1000.02
YT402.2122.01
CONNECTOR (3 PARTS)
14
YT410.1000.09
CAPACITOR
15
YM972.2170.13
CHIMNEY MOUNTING BRACKET SET
a. All the materials used in the packaging of your device are suitable for recycling.
16
YM171.2120.601
VALVE MOUNTING PLATE
b. Comply with the warning labels on the packs during transportation.
17
YM121.2120.609
CIRCUIT BOX MOUNTING PLATE
18
YM121.2120.610
YM913.2170.908
YM131.2170.626
YM131.2170.627
CONNECTOR BOX
19
20
21
CONNECTOR (7 PARTS)
WARNINGS ABOUT HANDLING AND CARRYING
c.
Grasp handling grips while carrying your device.
BODY GROUP
INTERNAL CHIMNEY
EXTERNAL CHIMNEY
19
4
EXPLODED VIEW
LOCATION OF PARTS
SEH2636
2170.9.579.01
7
Exploded View For 36" Model
20
9
15
8
21
2
6
3
4
3
12
9
18
6
4
4
16
19
5
1
1
1
7
11
8
10
8
17
5
1-110 V Supply Cord
2-Control Panel
3-Front Panel
4-Aluminum Cassette Filters
5-IIIumination
6-Body
7-Ventilation
8-External Chimney
9-Internal Chimney
13
14
4
2
Figure 1
5
18
TECHNICAL SPECIFICATIONS
SEH2624
Model
Model No 2170.6.579.01
Pos.
Part No.
Model
Voltage(V)
110-120 V
Lamp (W)
2 x 50 W
1
2
YT971.1000.22
CARBON FILTER
YT142.3150.06
ALUMINUM CASSETTE FILTER
3
YT207.1000.35
4
YT201.1000.22
CABLE FIXER(FOR CHIMNEY HOOD)
CIRCUIT BOX COVER
Control Type
5
YT201.1000.24
Motor Power (W)
6
YT202.1000.16
CIRCUIT BOX
METAL VALVE
7
8
YT460.1000.16
BLOWER
HALOGEN LAMP-50W
POWER SUPPLY CORD
Capacity (CFM)
YT403.1000.10
9
YT404.1000.24
10
YT455.2120.01
YT458.2120.04
11
12
LAMP HOLDER GROUP
SLIDER BUTTON
13
YT402.1000.02
YT402.2122.01
CONNECTOR (3 PARTS)
14
YT410.1000.09
CAPACITOR
15
YM972.2170.13
CHIMNEY MOUNTING BRACKET SET
16
YM171.2120.601
VALVE MOUNTING PLATE
17
YM121.2120.609
CIRCUIT BOX MOUNTING PLATE
18
YM121.2120.610
YM913.2170.615
YM131.2170.626
YM131.2170.627
19
20
21
SEH2624-SEH2636
Spare Part
Slider Button
340 W
500 CFM
F
Motor Insulation Class
Insulation Class
CLASS I
Table 2
CONNECTOR (7 PARTS)
CONNECTOR BOX
BODY GROUP
INTERNAL CHIMNEY
EXTERNAL CHIMNEY
17
6
EXPLODED VIEW
DIMENSIONAL DIAGRAM
SEH2624
2170.6.579.01
WARNING!
TO REDUCE THE RISK OF FIRE, USE ONLY METAL DUCTWORK.
7
7
8
8
5
15
21
11
17 16
13
16
11
Min 27 43 Max 44 16
11
17 16
3 81
13
16
8
Exploded View For 24" Model
20
3
12
9
18
6
16
1 161
10 85
19
14
3
1
16
19
2
5
16
9 /3
3 16
58
1
1
7
11
8
10
8
17
5
13
14
4
2
7
16
Hood does not operate
X
Illumination lamp
does not illuminate
X
Check carbon filter.
(If it operates with carbon filter, carbon filter should be
replaced quarterly.)
Check air outlet chimney.
(Air outlet chimney should be open.)
Check bulbs.
(Bulbs should be in good conditions.)
Check aluminum filter.
(Aluminum cassette filter should be washed once a month
under normal conditions.)
Check lamp switch.
(Lamp switch should be in on position.)
Check motor switch.
(Motor switch should be in I,II,III position)
Check Electric connection.
(Supply voltage should be 110-120 V, hood
should be connected to grounded socket.)
TROUBLESHOOTING
If hood does not operate, before contacting customer service:
Be sure that the power cable is connected to the power supply and that the electric
fuse for the installation is in good condition. Before contacting the service, check
your hood according to the table below. If the problem continues, contact your dealer
or authorized service center.
Troubleshooting Guide
INSTALLATION
CAUTION: During installation, persons installing the hood must wear heavy gloves
to protect against sharp edges.
POSITIONING THE RANGE HOOD
Upon completion of installation, the distance between the hood and an electric
rangetop must be a minimum of 25" (65cm), and the distance between the hood and a
gas rangetop must be a minimum of 30" (75cm).
min. 30" for gas ranges
min. 25" for electric ranges
X
X
Air suction of
hood is weak
It does not exhaust
air(in the ambient
without chimney)
X
X
X
X
X
X
Service and Spare Parts
You can obtain service advice and spare parts for your product directly from
SUMMIT by calling us at 1-800-932-4267 or by going to our website at
www.summitappliance.com/support
Have the model number of your range hood handy. This can be found on the
product label, which can be seen when you remove the aluminum cassette filter.
An exploded view, parts list and wiring diagram for your unit can be found on the
following pages of this manual.
15
PREPARING THE SITE
WARNING – TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY,
OBSERVE THE FOLLOWING:
a. Installation work and electrical wiring must be done by quali?ed personnel in
accordance with all applicable codes and standards, including ?re-rated
construction.
b. Sufficient air is needed for proper combustion and exhausting of gases through
the ?ue (chimney) of fuel-burning equipment to prevent backdrafting. Follow the
range manufacturer's guidelines and safety standards such as those published by
the National Fire Protection Association (NFPA), the American Society for
Heating, Refrigeration and Air Conditioning Engineers (ASHRAE), and the local
code authorities.
c. When cutting or drilling into wall or ceiling, do not damage electrical wiring and
other hidden utilities.
d. Ducted fans must always be vented to the outdoors.
8
REPLACEMENT OF LIGHTING COMPONENTS
Fix the connector box to the motor junction plate
with two 3,5 x 9,5 RYSB screws as shown.
Disconnect the hood.
Remove the aluminum cassette filter.
In order to change the 50-watt halogen light bulb, refer to diagram below. (1) Press
down on the back part of the lamp holder and (2) turn it counter-clockwise.
Replace old bulb with new one. Turn in reverse direction when installing new bulb.
INSTALLING MOUNTING BRACKETS
1. Construct wood wall framing with
minimum thickness of 8 mm (0.3") that
is flush with interior surface of wall
studs.
Make sure:
a. the framing is centered over
installation location;
b. the height of the framing will allow
the mounting brackets to be
secured to the framing.
2. After wall surface is finished, secure
mounting brackets to framing using the
assembly scheme.
FRAMING BEHIND DRYWALL
WARNING!
Be sure the bulb is cool before trying to change it.
A
Ø8
Ø10
B
Ø10
Ø8
D
Ø10
1
Ø10 C
50-W Halogen bulb
2
wood wall with minimum
thickness of 8 mm
Note: Replacement bulbs can be purchased directly from SUMMIT by calling us at
1-800-932-4267 or by going to our website at www.summitappliance.com/support.
Have the model number of your range hood handy.
To prepare the hanging plate for
installation:
Pull each tab upward, then retighten
each screw.
MOVING THE HOOD
If you expect to have to move your range hood:
* Keep original packaging. Move your hood using original packaging; comply
with moving instructions printed on the packaging.
If you do not have original packaging:
* Do not put any load on the range hood.
* Avoid any possible impacts.
* Pack the hood in such a way as to prevent damage.
9
14
*
*
*
CLEANING AND MAINTENANCE
Disconnect the device prior to maintenance (cut off its power supply by turning off
the switch).
The aluminum cassette filter holds oils and dust from the air. The metal filter must
be washed in hot soapy water every month, if possible in the dishwasher at
140°F.
To disassemble, press on the spring clamps at the edge of the cassette filter.
(Do not reassemble before drying after cleaning.)
*
Outer surfaces of the hood should be wiped with a cloth dampened with a solution
of liquid detergent. Do not clean the unit with products containing corrosive
substances.
* Avoid wetting switches or other electronic parts when cleaning with water or
other liquids.
* When cleaning stainless steel surfaces, use products specifically made for this
use.
Note: Aluminum filters may change color after several washings in the dishwasher.
This is normal and does not affect the performance of the filter.
CARBON FILTER REPLACEMENT
Before replacing the round carbon filters, disconnect the power to your device. The
carbon filters are located behind the metal filter, on the left and the right sides of the
blower. First, take out the metal filter. To replace the carbon filters, remove the old
ones from the device and mount the new ones as shown. In kitchens that do not
have a chimney outlet, the carbon filter should be replaced every 3-5 months
depending on usage.
INSTALLING THE RANGE HOOD ON THE
WALL
1. Bore the suspender holes:
Use the assembly template to bore
holes. Using a Ø 10mm drill bit, drill 4
holes A, B, C, D into the wall. With the
same drill bit, drill 2 holes (E, F) to screw
on the chimney mounting plate. Drill
holes must be about 9/16" (15 mm)
below the ceiling.
2. Fix the inserts:
Fix 4 inserts of Ø 10mm into the holes A,
B, C and D.
Fix 2 inserts of Ø 10mm into the holes E
and F.
3.Fix the suspender screws.
Fix the screws to holes A and B.Keep a clearance of 5
mm (0.2") between wall and head of screws in order to
hang the hood body easily.Fix the chimney mounting
plate to holes E and F by using the screws provided with
hood.
Ø10
Ø10
d
woo
E
10
F
Chimney Mounting
Plate
wood wall
13
l
wal
4. Hang the range hood on the wall:
Hang the range hood on screws A and B, then tighten the screws securely. Fix two
screws into the C and D holes through the corresponding holes inside the hood.
Assemble flexible aluminum tubing to the plastic fitting on the hood. Connect the
other end of the tubing to the wall outlet. Assemble upper exhaust to lower
exhaust. Place both parts on the range hood. Screw lower exhaust to the body
using the side holes. Fix upper exhaust by using the holes on the side of exhaust
mounting plate fixed to holes E and F.
OPERATION
SPEED CHOICE
Product has three-speed motor and a multi-positioned switch to command the
motor. For best performance, we recommend you to operate the unit at high
speed in excessively smokey and smelly places. Motor starts as the slider switch
is opened and stops as the slider set is closed.The slider button at the bottom of
the device is for turning the device on. To turn on the device, slide the button to
the right.
Hood must be started a few minutes before cooking starts and continue to
operate after cooking is finished until odors and fumes are removed.
LIGHTING
Hood has 2 lamps and a lamp switch to command the illumination. To turn the
illumination on, slide the slider illumination button to the left.
EFFICIENT VENTILATION
For correct ventilation, windows opening outside must be kept closed. Doors
and windows opening to other rooms may be kept open.
IMPORTANT NOTE!
Pay attention when operating the hood simultaneously with devices that
work by burning the ambient air with fuel (such as gas heaters). The
burning may be affected because the hood discharges air in the room to
the outside.
D
11
C
This advice does not apply to hoods not having an outside exhaust.
12
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising