Summit | SMSEH4630 | SEH4630 SEH4636manual3120.pdf | Summit SMSEH4630 SEH4630 SEH4636manual3120.pdf

Summit SMSEH4630 SEH4630 SEH4636manual3120.pdf
RANGE HOODS
Models
SEH4630
SEH4636
FELIX STORCH, INC.
770 Garrison Avenue
Bronx, New York 10474
www.summitappliance.com
TABLE OF CONTENTS
Safety Warnings................................................................................................2-4
Location of Parts..................................................................................................5
Technical Specifications......................................................................................6
Dimensional Diagram...........................................................................................7
Installation........................................................................................................8-12
Positioning the Range Hood......................................................................8
Preparing the Site...................................................................................8-9
Installing Mounting Brackets......................................................................9
Installing the Range Hood on the Wall................................................10-12
Operation.............................................................................................................13
Push-Button Controls
Efficient Ventilation
Cleaning and Maintenance............................................................................14-15
Carbon Filter Replacement......................................................................14
Replacement of Lighting Components.....................................................15
Moving the Hood......................................................................................15
Troubleshooting..................................................................................................16
Troubleshooting Guide
Service and Spare Parts
Exploded View(For 30" Model)...............................................................................17
Parts List(For 30" Model).......................................................................................18
Exploded View(For 36" Model)...............................................................................19
Parts List(For 36" Model).......................................................................................20
Wiring Diagram....................................................................................................21
Limited Warranty.................................................................................................22
LIMITED WARRANTY
SUMMIT Appliance warrants this product to be free from defects in
materials and workmanship for a period of one year from the date of original
purchase or delivery. Any parts determined to be defective will be replaced
by SUMMIT at no charge to you. Plastic parts, liners, and outer cabinets are
warranted to be manufactured to commercially acceptable standards and
free from defects at the time of delivery.
This limited warranty does not apply to:
1. Improper installation
2. Customer misuse, negligence or damage
3. Incorrect electrical current
4. Products with serial number altered or removed
5. Products sold or used outside the fifty United States or District of
Columbia
6. Commercial or industrial users
7. Damage to this product from accidents, alterations, failure to
follow instructions, fire, floods, earthquakes, war, civil disturbance
or Acts of God.
SUMMIT is not liable for consequential or incidental damage.
DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES
CUSTOMER'S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY
SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN. IMPLIED WARRANTIES,
INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, ARE LIMITED TO ONE YEAR. WARRANTOR SHALL NOT BE LIABLE FOR
INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR
LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES OF MERCHANTABILITY
OR FITNESS, SO THESE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU. THIS
WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER
RIGHTS, WHICH VARY FROM STATE TO STATE.
FELIX STORCH, INC.
Summit Appliance Division
770 Garrison Avenue
Bronx, NY 10474
Phone: (718) 893-3900
Fax: (718) 842-3093
www.summitappliance.com
For parts and accessory ordering,
troubleshooting and helpful hints, visit:
www.summitapplianceparts.com
22
WIRING DIAGRAM
Motor : 420 W / Lamp : 2x50w
RED
WHITE
BLUE
BLACK
WHITE
CAPACITOR
CONTROL
TROL PANEL
WHITE
BROWN
M
LAMP
INPUT : 110V AC / 60 Hz
WHITE
GREEN/YELLOW
BLACK
ELECTRONIC CIRCUIT
SAFETY WARNINGS
a. This product is designed for domestic use.
b. Electric input for the device must be 110-120 Volt, 60 Hz.
c. A grounded cable is installed in your device. It must be connected to a grounded
electrical socket.
d. All of the electrical installation must be done by a qualified electrician.
Installations done by unqualified persons may result in poor performance, failure
of the device, and accidents.
e. Do not let the power cord become pinched or squeezed during installation. Keep
the cord away from cooking surfaces; otherwise, the cord could melt and fire could
result.
f. Do not connect the power cord before installation is complete.
g. If the lights in your device have been on for a long time, do not touch them. They
are hot enough to burn your hands.
h. Kitchen hoods are designed for cooking in domestic residences. There is a risk of
failure if they are used for other purposes, and this will void the warranty.
i. Comply with local codes and regulations related to discharging air. (This warning
does not apply to hoods with no stack).
j. Do not cook flammable foods below the hood.
k. Start the hood after placing pots or pans on your cooking surface. Otherwise, high
temperatures may result in deformation of parts of the hood.
l. Do not leave hot oil on the cooking surface. Pots that contain hot oil can ignite,
causing fires.
m. When frying foods, be watchful of curtains. They may catch fire.
n. Change the filters regularly. Oily residues could become fire risks.
o. When replacing filters, always use the same type of filter as the original.
Substitutes may be unsuitable.
p. Do not use the device without a filter. Do not remove filters while the device is
working.
q. If there is ignition or sparking, cut off the electric power to the device. (Turn off the
switch.)
r.
s.
If the device is not cleaned regularly, built-up grime and dirt could cause a fire.
When you make the stack installation for your hood, use 150 mm (5.9") diameter
pipes. The stack installation must be as short and with as few bends as possible.
t.
21
Keep the packing materials away from children, as these materials could be
dangerous to them.
u. Ensure that children do not play with the device. Do not let little children use the
device.
2
v.
If the electrical cable is defective, it must be changed by the manufacturer or a
qualified service technician.
w. If there is a fire, cut off the power to the hood and cooking devices and cover
the flame. Do not use water to extinguish the fire.
Model
SEH4636
Model No
3120.9.579.01
Part No.
Spare Part
YT971.1000.22
CARBON FILTER
YT142.2120.06
YT207.1000.35
ALUMINUM CASSETTE FILTER
3
CABLE FIXER(FOR CHIMNEY HOOD)
4
YT201.1000.21
CIRCUIT BOX
5
YT201.1000.22
CIRCUIT BOX COVER
6
YT202.1000.16
METAL VALVE
7
8
YT460.1000.17
YT403.1000.10
BLOWER
HALOGEN LAMP-50W
9
YT404.1000.24
POWER SUPPLY CORD
10
YT455.3110.01
WARNING! TO REDUCE THE RISK OF INJURY TO PERSONS IN THE EVENT
OF A RANGE-TOP GREASE FIRE, OBSERVE THE FOLLOWING:
11
12
YT456.1001.05
YT457.3110.01
LAMP HOLDER GROUP
ELECTRONIC TOUCH BUTTON SET
a. SMOTHER FLAMES with a close-?tting lid, cookie sheet or metal tray, then
turn off the burner. BE CAREFUL TO PREVENT BURNS. If the flames do
not go out immediately, EVACUATE AND CALL THE FIRE DEPARTMENT.
b. NEVER PICK UP A FLAMING PAN – you may be burned.
c. DO NOT USE WATER, including wet dishcloths or towels, to douse the fire –
a violent steam explosion could result.
d. Use an extinguisher ONLY if:
1. You know you have a Class ABC extinguisher, and you already know
how to operate it.
2. The ?re is small and contained in the area where it started.
3. The ?re department is being called.
4. You can fight the fire with your back to an exit.
13
YT402.1000.02
14
YT410.1000.09
15
YM972.3120.22
YM171.2120.601
CHIMNEY MOUNTING BRACKET SET
YM121.2120.610
YM171.3110.603
CONNECTOR BOX
FRONT PANEL
20
YM913.3120.919
YM131.3110.655
INTERNAL CHIMNEY
21
YM131.3110.656
EXTERNAL CHIMNEY
READ AND SAVE THESE INSTRUCTIONS
WARNING! TO REDUCE THE RISK OF A RANGE-TOP GREASE FIRE:
a. Never leave surface units unattended at high settings. Boilovers cause
smoking and greasy spillovers that may ignite. Heat oils slowly on low or
medium settings.
b. Always turn hood ON when cooking at high heat or when flambéing food.
c. Clean ventilating fans frequently. Grease should not be allowed to accumulate
on fan or ?lters.
d. Use proper pan size. Always use cookware appropriate for the size of the
surface element.
Pos.
1
2
16
17
18
19
ELECTRONIC CIRCUIT FOR 3 SPEED
CONNECTOR (3 PARTS)
CAPACITOR
VALVE MOUNTING PLATE
MOTOR BOX
WARNING! TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR OTHER
INJURY, OBSERVE THE FOLLOWING:
3
20
EXPLODED VIEW
SEH4636
3120.9.579.01
Exploded View For 36" Model
20
15
a. Use this unit only in the manner intended by the manufacturer. If you have
questions, contact the manufacturer.
b. Before servicing or cleaning the unit, switch power off at the service panel and
lock the service-disconnecting means to prevent power from being switched on
accidentally. If the service-disconnecting means cannot be locked, securely
fasten a prominent warning device, such as a tag, to the service panel.
c. To reduce the risk of fire or electric shock, do not use this fan with any solidstate speed control device.
21
3
13
9
6
17
16
7
1
CAUTION:
a. The fan in this device is for general ventilating use only. Do not use to exhaust
hazardous or explosive materials and vapors.
b. To reduce the risk of fire and to properly exhaust air, be sure to duct air outside.
Do not vent exhaust air into spaces within wall, ceilings, attics, crawl spaces or
garages.
c. Use only metal duct work.
1
WARNINGS ABOUT HANDLING AND CARRYING
a. All the materials used in the packaging of your device are suitable for recycling.
18
4
12
14
5
b. Comply with the warning labels on the packs during transportation.
c.
Grasp handling grips while carrying your device.
19
11
10
8
8
2
19
4
LOCATION OF PARTS
Model
SEH4630
Model No
3120.8.579.01
Part No.
Spare Part
YT971.1000.22
CARBON FILTER
YT142.2120.19
YT207.1000.35
ALUMINUM CASSETTE FILTER
3
CABLE FIXER(FOR CHIMNEY HOOD)
4
YT201.1000.21
CIRCUIT BOX
5
YT201.1000.22
CIRCUIT BOX COVER
6
YT202.1000.16
METAL VALVE
7
8
YT460.1000.17
YT403.1000.10
BLOWER
HALOGEN LAMP-50W
9
YT404.1000.24
POWER SUPPLY CORD
10
YT455.3110.01
11
12
YT456.1001.05
YT457.3110.01
LAMP HOLDER GROUP
ELECTRONIC TOUCH BUTTON SET
13
YT402.1000.02
14
YT410.1000.09
15
CHIMNEY MOUNTING BRACKET SET
YM972.3120.22
YM171.2120.601 VALVE MOUNTING PLATE
Pos.
3
2
1
2
4
6
5
8
7
16
17
CONNECTOR (3 PARTS)
CAPACITOR
YM121.2120.610
YM171.3110.603
CONNECTOR BOX
FRONT PANEL
20
YM913.3120.806
YM131.3110.655
INTERNAL CHIMNEY
21
YM131.3110.656
EXTERNAL CHIMNEY
18
1
ELECTRONIC CIRCUIT FOR 3 SPEED
19
MOTOR BOX
1- 110 V Supply Cord
2- Ventilation
3- Internal Chimney
4- External Chimney
5- Front Panel
6- Control Panel
7- Aluminum Cassette Filter
8- IIlumination
5
18
EXPLODED VIEW
TECHNICAL SPECIFICATIONS
SEH4630
3120.8.579.01
Model
SEH4630-SEH4636
Exploded View For 30" Model
20
Voltage(V)
110-120 V
Lamp (W)
2 x 50 W
15
Control Type
21
3
13
9
6
17
16
7
1
1
Touch Button
Motor Power (W)
420 W
Capacity (CFM)
650 CFM
Motor Insulation Class
F
CLASS I
Insulation Class
Table 2
18
4
12
14
5
19
11
10
8
8
2
17
6
DIMENSIONAL DIAGRAM
WARNING!
TO REDUCE THE RISK OF FIRE, USE ONLY METAL DUCTWORK.
1
11
4
8
5
Hood does not operate
X
Illumination lamp
does not illuminate
X
Check bulbs.
(Bulbs should be in good conditions.)
Check aluminum filter.
(Aluminum cassette filter should be washed once a month
under normal conditions.)
Check lamp switch.
(Lamp switch should be in on position.)
3
8
/ 35
Check carbon filter.
(If it operates with carbon filter, carbon filter should be
replaced quarterly.)
29 8
11
16
Check air outlet chimney.
(Air outlet chimney should be open.)
5
19
Check motor switch.
(Motor switch should be in I,II,III position)
1 169
15
Min 25 / Max 39 16
Check Electric connection.
(Supply voltage should be 110-120 V, hood
should be connected to grounded socket.)
23 85
13
16
15 43
3 81
13
16
12
TROUBLESHOOTING
If hood does not operate, before contacting customer service:
Be sure that the power cable is connected to the power supply and that the electric
fuse for the installation is in good condition. Before contacting the service, check
your hood according to the table below. If the problem continues, contact your dealer
or authorized service center.
Troubleshooting Guide
X
X
X
X
Air suction of
hood is weak
It does not exhaust
air(in the ambient
without chimney)
X
X
X
X
Service and Spare Parts
You can obtain service advice and spare parts for your product directly from
SUMMIT by calling us at 1-800-932-4267 or by going to our website at
www.summitappliance.com/support
Have the model number of your range hood handy. This can be found on the
product label, which can be seen when you remove the aluminum cassette filter.
An exploded view, parts list and wiring diagram for your unit can be found on the
following pages of this manual.
7
16
REPLACEMENT OF LIGHTING COMPONENTS
Disconnect the hood.
Remove the aluminum cassette filter.
In order to change the 50-watt halogen light bulb, refer to diagram below. (1) Press
down on the back part of the lamp holder and (2) turn it counter-clockwise.
Replace old bulb with new one. Turn in reverse direction when installing new bulb.
INSTALLATION
CAUTION: During installation, persons installing the hood must wear heavy gloves
to protect against sharp edges.
POSITIONING THE RANGE HOOD
Upon completion of installation, the distance between the hood and an electric
rangetop must be a minimum of 25" (65cm), and the distance between the hood and a
gas rangetop must be a minimum of 30" (75cm).
WARNING!
Be sure the bulb is cool before trying to change it.
min. 30" for gas ranges
1
min. 25" for electric ranges
50-W Halogen bulb
2
Note: Replacement bulbs can be purchased directly from SUMMIT by calling us at
1-800-932-4267 or by going to our website at www.summitappliance.com/support.
Have the model number of your range hood handy.
MOVING THE HOOD
If you expect to have to move your range hood:
* Keep original packaging. Move your hood using original packaging; comply
with moving instructions printed on the packaging.
If you do not have original packaging:
* Do not put any load on the range hood.
* Avoid any possible impacts.
* Pack the hood in such a way as to prevent damage.
PREPARING THE SITE
WARNING – TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY,
OBSERVE THE FOLLOWING:
a. Installation work and electrical wiring must be done by quali?ed personnel in
accordance with all applicable codes and standards, including ?re-rated
construction.
b. Sufficient air is needed for proper combustion and exhausting of gases through
the ?ue (chimney) of fuel-burning equipment to prevent backdrafting. Follow the
range manufacturer's guidelines and safety standards such as those published by
the National Fire Protection Association (NFPA), the American Society for
Heating, Refrigeration and Air Conditioning Engineers (ASHRAE), and the local
code authorities.
c. When cutting or drilling into wall or ceiling, do not damage electrical wiring and
other hidden utilities.
d. Ducted fans must always be vented to the outdoors.
15
8
*
Fix the connector box to the motor junction plate with 2 pieces
of 3,5 x 9,5 RYSB screws as shown.
*
*
CLEANING AND MAINTENANCE
Disconnect the device prior to maintenance (cut off its power supply by turning off
the switch).
The aluminum cassette filter holds oils and dust from the air. The metal filter must
be washed in hot soapy water every month, if possible in the dishwasher at
140°F.
To disassemble, press on the spring clamps at the edge of the cassette filter.
(Do not reassemble before drying after cleaning.)
In order to hang the product onto hanging screw, there are 2
hanging parts in L shape. Those parts are provided with
screw set for packing facilities. Before mounting the product,
screw the hanging parts with bolts in size M5 x 40 on to M5
nailing nuts.
*
INSTALL MOUNTING BRACKETS
1. Construct wood wall framing(with
minimum thickness of 8 mm) that is
flush with interior surface of wall
studs.
FRAMING BEHIND DRYWALL
A
Make sure:
a) the framing is centered over
installation location.
Ø8
Ø10
D
b) the height of the framing will allow
the mounting brackets to be secured
to the framing.
2. After wall surface is finished,
secure mounting brackets to framing
using the assembly scheme. See the
next page.
9
B
Ø10
Ø8
Ø10
Ø10 C
wood wall with minimum
thickness of 8 mm
Outer surfaces of the hood should be wiped with a cloth dampened with a solution
of liquid detergent. Do not clean the unit with products containing corrosive
substances.
* Avoid wetting switches or other electronic parts when cleaning with water or
other liquids.
* When cleaning stainless steel surfaces, use products specifically made for this
use.
Note: Aluminum filters may change color after several washings in the dishwasher.
This is normal and does not affect the performance of the filter.
CARBON FILTER REPLACEMENT
Before replacing the round carbon filters, disconnect the power to your device. The
carbon filters are located behind the metal filter, on the left and the right sides of the
blower. First, take out the metal filter. To replace the carbon filters, remove the old
ones from the device and mount the new ones as shown. In kitchens that do not
have a chimney outlet, the carbon filter should be replaced every 3-5 months
depending on usage.
14
OPERATION
Peel off protective films from the stainless steel components after assembly.
PUSH-BUTTON CONTROLS
Your range hood has three levels of ventilation. According to your needs, you
can choose a low (|), medium (||) or high (|||) ventilation level by pushing one of
the first three buttons on the front panel.
Lamp
INSTALLING THE RANGE HOOD ON THE
WALL
A)DRILLING OF HANGING HOLES
Set the assembly scheme onto place where
the product will be mounted and open the
holes on A,B,C,D points with Ø 10mm sized
drill bit.
Open holes at points E and F with a Ø 10mm
sized drill bit in order to screw chimney
assembly parts in place 15mm below ceiling.
EFFICIENT VENTILATION
For correct ventilation, windows opening outside must be kept closed. Doors and
windows opening to other rooms may be kept open.
C)SCREWING OF HANGING SCREWS
Screw the hanging screws into Ø 10mm sized
wall plugs in A, B holes.
There must be 5mm distance between screw
head and wall.
E
F
wood wall
This advice does not apply to hoods not having an outside exhaust.
13
Ø10
B
A,B,C,D
A
C
ll
a
dw
o
wo
Screw the chimney mounting parts into Ø 10mm sized wall
plugs on E,F points which is provided with your product.
Chimney Mounting
Plate
IMPORTANT NOTE!
Pay attention when operating the hood simultaneously with devices that
work by burning the ambient air with fuel (such as gas heaters). The
burning may be affected because the hood discharges air in the room to
the outside.
F
D
B)SCREWING OF WALL PLUGS
Screw the Ø 10mm sized wall plugs into A, B,
C,D holes for hanging screws.
Screw the Ø 10mm sized wall plugs into E, F
holes for chimney mounting parts.
The fourth button (Lamp) controls the lighting of the hood. There are 2 bulbs
which are turned on and off by pressing the Lamp button.
Ø10
E,F
E
10
WARNING!
TO REDUCE THE RISK OF FIRE, USE ONLY METAL DUCTWORK.
Place metal chimneys over product body.
D)MOUNTING THE PRODUCT ONTO WALL
Hang the product on the already-mounted L-shaped
hanging parts.
Screw internal chimney on chimney
fixing sheet, fixed over upper corner of
external chimney.
Fix the body onto the wall with a
screw through the (C,D) holes that
are located inside the body.
A
D
C
B
Then fix the body on
(A,B) holes to the wall.
NOTE: If the hood seems to be tilting, slightly loosen the M5 screws that are used
on the hanging parts at the top and straighten until the hood is vertical.
11
12
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising