InSinkErator | 76944 | Mounting Adapter Guide | InSinkErator 76944 Mounting Adapter Guide

InSinkErator 76944 Mounting Adapter Guide
Mounting Adaptor
Selection Guide
Th
em
os
tt
ru
st
for Foodservice Food
Waste Disposers
ed
na
m
ei
n
foo
dw
m an
e
t
s
a
a g e m e nt.
Use This Chart to Select the Right InSinkErator Mounting Adaptor
A. Disconnect existing disposer from sink bowl or cone.
B. Find the diagram that matches your sink bowl or cone.
C. Measure the A and B dimensions (also C, D and E if indicated).
D. Match the manufacturer and dimensions to find the adaptor number to order.
1
A
B
ISE Ring
Adaptor #
4½"
5-1/8"
11327A
Discard previous adaptor parts.
FMC, Avant
4-5/8"
5-1/8"
11378
Re-use split ring.
FMC, Avant
5¼"
5-11/16"
11327C
Discard previous adaptor parts.
Bus Boy
6"
6-7/8"
11327K
Discard previous adaptor parts
(has 3-piece split ring).
ISE, Toledo
6"
7-3/16"
11327B
Discard previous adaptor parts.
Standard ISE mounting
6-5/8"
7-1/8"
11599E
Discard previous adaptor parts.
National, Hobart, Toledo
7"
7-3/8"
11327G
Discard previous adaptor parts.
National mounting has ten
bolt circle on split ring.
Salvajor
7"
7¾"
11599A
Discard previous adaptor parts
(split ring supplied).
ISE, Toledo
8"
9¼"
11327
Discard previous adaptor parts
(split ring supplied).
Normally Used By
Waste King, ISE, Toledo, National
FLANGE
SINK MOUNT
A
B
A – Diameter (sink or bowl opening)
B – Diameter (outside flange)
2
A
E
B
Special Information
No. of
ISE Ring
Bolt Holes Adaptor#
A
B
E
Waste King, Red Goat
4½"
6½"
5½"
6
11599
Discard previous
adaptor parts. Use
existing bolt holes.
American Delphi, Atomic
6"
7½"
6-7/8"
6
11378D
Discard previous
adaptor parts. Use
existing bolt holes.
National, Hobart
7"
8½"
8-1/16"
10
11599B
Discard previous
adaptor parts.
Hobart
9"
12-1/8"
11-1/8"
8
11327E
Discard previous
adaptor parts. Use
existing bolt holes.
A – Diameter (sink or bowl opening)
B – Diameter (outside flange)
E – Diameter (bolt hole circle)
3
BOLT
HOLES IN
UNATTACHED
RING
A
B
A – Diameter (sink or bowl opening)
B – Diameter (outside flange)
Special
Information
Normally Used By
Normally Used By
A
B
Waste King
6"
6½"
ISE Ring
Adaptor No.
11327D
Special Information
Loose ring on sink not used with
this adaptor (O.D. of loose ring is
7½" with six bolts – 7" bolt hole
circle diameter).
4
C
MEASURE
FROM ABOVE
(INSIDE BEND)
A
C
ISE Ring
Adaptor No.
Waste King, Bus Boy
5-7/8"
6-1/2"
11327H
Waste King, Bus Boy
5-7/8"
6-7/8"
11327H
Normally Used By
A
Special Information
Re-use existing clamping ring. Request
#11307 clamping ring if existing
clamping ring cannot be used.
LOOSE RING (RE-USE)
A – Diameter (sink or bowl opening)
C – Diameter (inside bend)
5
C
Normally Used By
MEASURE
FROM ABOVE
(INSIDE BEND)
Hobart
A
C
E
4½"
6-7/8"
5½"
No. of
ISE Ring
Bolt Holes Adaptor#
6
11327H
Special
Information
Discard previous
adaptor parts.
A
E
A – Diameter (sink or bowl opening)
C – Diameter (inside bend)
E – Diameter (bolt hole circle)
6
C
MEASURE
FROM ABOVE
(INSIDE BEND)
A
SNAPRING
GROOVE
Normally Used By
A
C
ISE Ring
Adaptor No.
Hobart
5"
5-7/8"
11327J
Discard previous adaptor parts (clamping
ring supplied).
G.E.
6"
6-3/8"
11378E
Discard previous adaptor parts – has snap
ring groove on outside of sink throat.
Normally Used By
A
D
ISE Ring
Adaptor No.
4½"
1-1/8"
11378C
4¾" rubber connection sleeve and
clamping bands. Support legs required.
Waste King
6"
1-1/8"
11378A
6¼" rubber connection sleeve and
clamping bands. Support legs required.
Red Goat, Insinger
7"
1-1/8"
11378B
7¼" rubber connection sleeve and
clamping bands. Support legs required.
Master
8"
1"
11599K
8¼" rubber connection sleeve and
clamping bands. Support legs required.
Normally Used By
A
D
ISE Ring
Adaptor No.
Salvajor
4-7/16"
1"
11599N
Salvajor
6-5/8"
1"
11599H
Special Information
A – Diameter (sink or bowl opening)
C – Diameter (inside bend)
7
D
NO FLANGE
MOUNT
A
A – Diameter (sink or bowl opening)
D – Diameter
8
D
RAISED
BEAD
A
A – Diameter (sink or bowl opening)
D – Diameter
Red Goat, Insinger
Special Information
Special Information
Has raised bead on outside of sink throat.
Support legs required.
InSinkErator. #1 Choice of Foodservice Operations
Every InSinkErator disposer reflects an uncompromising
It’s all part of our demanding quality control programs that
cover not only the initial design, but every step in the
manufacturing process.
commitment to quality as well as state-of-the-art engineering.
Unlike other manufacturers, we begin with the raw materials and
build virtually every component that goes into our disposers.
Whether you serve 25 or 2500 people, there’s an InSinkErator disposer that’s right for you.
Recommended Sizing Chart*
Persons per Meal Soiled Dish Table
Vegetable Prep.
Area
Salad Prep. Area
Pot Sink
Meat Prep. Area
Up to 100
SS-75
SS-50
–
–
–
100-150
SS-100
SS-75
SS-50
SS-50
–
150-175
SS-125
SS-100
SS-75
SS-50
SS-150
175-200
SS-150
SS-150
SS-75
SS-75
SS-150
200-300
SS-200
SS-150
SS-75
SS-75
SS-300
300-750
SS-300
SS-150
SS-75
SS-75
SS-300
750-1500
SS-500
SS-300
SS-150
SS-150
SS-500
1500-2500
(2) SS-500
SS-300
SS-150
SS-150
SS-500
2500-over Contact your Food Service Consultant or InSinkErator
For special applications, such as supermarkets or other heavy, continuous volume installations, select Models SS-750 or SS-1000
The models listed are the minimum size InSinkErator disposer to be used at the point-of-origin for food wastes. Sizing recommendations are
given in general terms. Actual capacities vary depending on the type of food waste.
*
10 Stainless Steel Models from ½ H.P. to 10 H.P. in three basic sizes.
SS-50 to SS-125
SS-150 to SS-200
SS-300 to SS-1000
65/8"
65/8"
65/8"
33/8"
�������������
�����������
23/4"
233/4"
187/16"
��
47/8"
7 3/8"
613/16"
13"
73/4"
�������������
�����������
711/16"
17"
�������������
�����������
71/8"
11/2"
613/16"
2"
������
�����
������
311/8"
7"
3"
83/4"
������
�����
������
83/4"
���������������
�������������������������������
�������������������������������
�������������������������������
4700 21st Street
Racine, WI 53406
1-800-845-8345
www.insinkerator.com
F188-06E-19-02
©InSinkErator 2006
The Emerson logo is a trademark and servicemark of Emerson Electric Co.
InSinkErator is a division of Emerson Electric Co.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising