Broan | QTRE100S | Specification Sheet | Broan QTRE100S Specification Sheet

Broan QTRE100S Specification Sheet
SPECIFICATION SHEET
model QTrE100s
humidity sensing fan
A modern-styled, high performance fan, with
sensing circuitry, that “knows” when to ventilate
the room.
FEATURES
BLOWER:
• Plug-in, permanently lubricated motor - engineered
for continuous operation
• Dynamically balanced centrifugal blower wheel for
quiet, efficient performance
• Maintains a high percentage of rated CFM in less
than ideal installations
• Low RPM for quiet operation
• Resilient anti-vibration motor mounts
HOUSING:
• Rugged, 26 gauge, galvanized steel construction
• 4” round ducting for superior performance
• Polymeric duct connector with tapered sleeve and no
metallic clatter
• 7-5/8” height allows for 2” x 8” (nominal) joist
installations
• Sturdy, easy, four-point mounting directly to joist
• Includes unique spacer (patent pending) for mounting
to engineered “I” joists
• Includes hanger bars to position housing anywhere
between 16” to 24”-on-center joists
• Two sets of mounting holes for hanger bars allow
flush installation with bottom or top of drywall
AUTOMATIC CONTROL:
• Humidity control automatically turns fan ON when either of
these conditions is detected:
- a rapid to moderate increase of humidity
- humidity above factory set-point
• Two wire manual operation for odor control - Turns fan ON
when power line through wall switch is cycled ON, OFF and
back ON
• Remains ON for 20 minutes after humidity has stabilized
and is below factory set-point or after manually initiated
through power line cycling
• Saves energy because unit runs only for the time required.
A unit controlled with a wall timer may keep fan ON longer
than required or turn it OFF before room is sufficiently
ventilated
CONTROLS (Purchase separately):
• Refer to Broan’s catalog for a complete line of accessories
to effectively adapt these fans to your construction
requirements
U.L. Listed for use over bathtubs and showers when connected
to a GFCI protected branch circuit (ceiling mount only).
3-Year Warranty
GRILLE:
• Polymeric construction
• Innovative design - the result of extensive research
with designers and consumers
Broan-NuTone LLC Hartford, Wisconsin www.broan.com 800-558-1711
REFERENCE
QTY.
REMARKS
Project
Location
Architect
Engineer
Contractor
Submitted by
Date
70M
99044036C
TYPICAL SPECIFICATION
Blower assembly shall be removable, have a centrifugal-type blower
wheel and a permanently lubricated motor designed for continuous
operation and mounted with resilient anti-vibration mounts.
Ceiling Ventilator shall be Broan Model QTRE100S.
The unit will have a control that will automatically turn fan ON
when humidity increase is rapid to moderate, or when humidity
is higher than factory set-point, or when supply power is cycled
from ON (for more than a second) to OFF (for less than a second)
and back ON. It shall turn OFF 20 minutes after humidity has
stabilized and is below factory set-point, or after manually initiated
by supply power cycling.
Non-metallic damper/duct connector shall be included.
Air delivery shall be no less than 100 CFM and sound level no greater
than 1.5 Sones. All air and sound ratings shall be certified by HVI.
Ceiling Ventilator shall be Energy Star® qualified and have an energy
efficient permanent split capacitor motor.
Ceiling Ventilator shall have corrosion resistant galvanized steel
housing with four-point mounting capability. It shall be ducted to
a roof or wall cap using 4” round ductwork.
Ceiling Ventilator shall be U.L. Listed for use over bathtubs and showers
when connected to a GFCI protected branch circuit.
PERFORMANCE RATINGS
MODEL QTRE100S
VENTILATOR
HVI PERFORMANCE
CFM
@0.1” Ps
100
HVI-2100 certified ratings comply with
new testing technologies and procedures
prescribed by the Home Ventilating Institute, for
off-the-shelf products, as they are available to
consumers. Product performance is rated at 0.1
in. static pressure, based on tests conducted
in a state-of-the-art test laboratory. Sones are
a measure of humanly-perceived loudness,
based on laboratory measurements.
MODEL QTRE100S
0.9
0.8
0.7
Ps (in. w.g.)
Sones
@0.1” Ps
1.5
Model
QTRE100S
AIR FLOW PERFORMANCE
0.6
0.5
0.4
0.3
0.2
0.1
0.0
0
10
20
30
40
50
60
70
80
Airflow (cfm)
AMPS
Model
QTRE100S
WEIGHT
Amps*
0.4
* Total connected load
Model
QTRE100S
Shipping
Weight
12.2 lbs.
Broan-NuTone LLC Hartford, Wisconsin www.broan.com 800-558-1711
90
100
110
120
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising