Broan | SP100 | Specification Sheet | Broan SP100 Specification Sheet

SPECIFICATION SHEET
MODELS SP100, SP140 & SP200
SINGLE-PORT REMOTE
IN-LINE VENTILATORS
Provides continuous, low-level ventilation, improving
overall indoor air quality.
TYPICAL SPECIFICATION
FEATURES
Ventilator to have steel housing with cover that permits
quick access to blower for cleaning or service without
disturbing ductwork. All wiring to be done from outside of
housing. Unit will accomodate 6" round, insulated flexible
duct.
BLOWER:
• High pressure, centrifugal blowers accommodate many
ducting configurations
• Motors designed for continuous operation
• Permanently-lubricated motors assure worry-free
operation
• Permanent Split Capacitor (PSC) motors are used for
quiet operation and low power consumption
• Plug-in motor rated at 120 VAC, 60 HZ operation
• HVI certified to assure consistent operating performance
The in-line ventilator shall be Broan Model SP100 (Broan
Model SP140) (Broan Model SP200).
Blower shall be designed for continuous operation using a
permanently lubricated, PSC (Permanent Split Capacitor)
motor and a centrifugal blower wheel.
Unit to be U.L. listed, CSA certified, and HVI certified.
HOUSING:
• Rugged 20 gage steel housing finished with electricallybonded epoxy paint
• May be installed in virtually any orientation - ceiling, wall
or floor
• In-line installation assures quiet operation
• Easily removable panel permits quick access to blower
for cleaning and servicing without disturbing ductwork
• 6" round inlet and outlet for easy duct connections
• All wiring and ductwork can be connected from the
outside of the housing - no need to remove access panel
or blower.
Broan-NuTone LLC, 926 West State Street, Hartford, WI 53027 (1-800-637-1453)
REFERENCE
QTY.
REMARKS
Project
Location
Architect
Engineer
Contractor
Submitted by
Date
10D
99041953E
PERFORMANCE RATINGS - MODELS SP100, SP140 & SP200
AMCA LICENSED PERFORMANCE
Model
No.
SP100
SP140
SP200
0.0
120
164
224
CFM @ Static Pressure (Ps - Inches of H20)
0.2
0.25
0.4
0.6
0.8
110
107
97
81
150
145
133
115
103
210
207
195
181
170
Volts
120
120
120
Amps
.5
.8
1.3
Nominal
RPM
2850
2900
3000
Duct
Size
6" RD
6" RD
6" RD
The performances shown are with inlet grille, backdraft damper and outlet duct. RPM shown is nominal and the performance is based on actual speed of test.
WEIGHT
"Broan-NuTone LLC certifies
that the models shown herein
are licensed to bear the AMCA
Seal. The ratings shown are
based on tests and procedures
performed in accordance with
AMCA Publication 211 and
comply with the requirements
of the AMCA Certified Ratings
Program."
HVI PERFORMANCE
MODEL SHIPPING
NO.
WT.
SP100
SP140
SP200
MODEL
NUMBER
SP100
SP140
SP200
15.8 lbs.
16.2 lbs.
16.3 lbs.
SELECTION GUIDE
HVI-2100 CERTIFIED RATINGS
comply with new testing technologies
and procedures prescribed by the
Home Ventilating Institute, for offthe-shelf products, as they are
available to consumers. Product
performance is rated at 0.1 in. static
pressure, based on tests conducted
in AMCA’s state-of-the-art test
laboratory. Sones are a measure of
humanly-perceived loudness, based
on laboratory measurements.
DWELLING SIZE RANGE (Sq. Ftg.)
(include finished basement area)
MODEL
SP100
SP140
SP200
.50 AC/HR*
1500
2100
3000
.35 AC/HR*
2140
3000
4285
.30 AC/HR*
2500
3500
5000
SP100
STATIC PRESSURE (IN. WG.)
*AC/HR = Air Changes per Hour Based on 8' ceilings, CFM @ .25Ps
SQ. FT. X 10.764= M 2
CFM
.2" Ps .4" Ps
110
120
150
140
210
200
AIR FLOW RATE (CFM)
SP200
STATIC PRESSURE (IN. WG.)
STATIC PRESSURE (IN. WG.)
SP140
AIR FLOW RATE (CFM)
AIR FLOW RATE (CFM)
Broan-NuTone LLC, 926 West State Street, Hartford, WI 53027 (1-800-637-1453)
Download PDF

advertising