Broan | 512 | Specification Sheet | Broan 512 Specification Sheet

Broan 512 Specification Sheet
SPECIFICATION SHEET
MODEL 512
ROOM-TO-ROOM FAN
Move heated or cooled air through interior walls
with this small, yet powerful unit.
TYPICAL SPECIFICATION
Ventilator shall be Broan Model 512.
FEATURES
Unit shall be installed in an interior wall - NOT through.
GRILLES:
• White polymeric - complement any decor
• Spin-on mounting
a fire-rated wall. Unit shall be controlled with a toggle switch
(speed control).
MOTOR:
• Plug-in, thermally protected, permanently lubricated
• Quiet, polymeric blade
HOUSING:
• 24 gage steel housing finished with electrically-bonded
epoxy paint
• Fits walls up to 5-1/8" thick
• Use with Model 57V, 57W Solid State Speed Control
Ventilator shall have steel housing finished with electricallybonded epoxy paint.
Motor assembly shall be removable and permanently lubricated.
Air delivery shall be no less than 90 CFM and sound level no
greater than 3.5 Sones. All air and sound ratings shall be
certified by HVI. Unit shall be U.L. Listed.
SPECIFICATIONS
VOLTS AMPS
120
0.7
RPM
2600
SONES CFM
3.5
90
HVI-2100 CERTIFIED RATINGS comply with
new testing technologies and procedures
prescribed by the Home Ventilating Institute,
for off-the-shelf products, as they are available
to consumers. Product performance is rated at
0.1 in. static pressure, based on tests conducted
in AMCA’s state-of-the-art test laboratory.
Sones are a measure of humanly-perceived
loudness, based on laboratory measurements.
Broan-NuTone LLC, 926 West State Street, Hartford, WI 53027 (1-800-637-1453)
REFERENCE
QTY.
REMARKS
Project
Location
Architect
Engineer
Contractor
Submitted by
Date
40B
99041101E
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising