CABP3 Revised 10/16/13 Page 1/1 Document # PG09-001 PLANNING GUIDE Renaissance® Cabinet Blower Total Connected Load Blower Rating* (CFM) Approximate Shipping Weight 4 Amps. @ 120Vac, 60 Hz 600 Nominal 585.6 Actual 34 lbs. warning * At zero inches static pressure. Performance varies based on duct system configuration. NOTE: See downdraft vent Planning planning guide for approved applications. • Observe all governing codes and ordinances during planning and installation. Contact your local building department for further information. • This appliance must be installed in accordance with the downdraft vent installation instructions. All tolerances: ±1/16” (±1.6 mm) unless otherwise stated 17" (43.2 cm) Ø 7/8" (2.2 cm) (Grommet Hole) 2" (5.1 cm) 5 3/4" (14.6 cm) 1/2" (1.3 cm) 19 3/8" (49.2 cm) 3 3/4" (9.5 cm) 18 7/8" (47.9 cm) Electrical Location Side View 17" (43.2 cm) 9 3/4" (24.8 cm) 17 7/8" (45.4 cm) 18 3/8" (46.7 cm) 3" (7.6 cm) 18 7/8" (47.9 cm) top view duct location side view Static pressure - inches of water CABP3 Blower Performance 5.0 4.0 3.0 2.0 1.0 0 100 200 300 400 500 600 Airflow CFM (Cubic feet/minute) Electrical Wiring Access Hole 3/8” (9 mm) mounting flange around perimeter iso view All specifications subject to change without notice. www.dacor.com Phone: (800) 793-0093