Whirlpool | CSP2860TQ | Spec Tear Sheet | Whirlpool CSP2860TQ Spec Tear Sheet

COMMERCIAL STACK DRYERS
Featuring Mechanical Controls
SAVE SPACE
Stacked unit gives you double drying capacity
in limited space.
FOR YOUR CUSTOMERS
• Large 7.4 Cu. Ft. Capacity
• 3 Cycle Options: Heavy-Duty, Normal
and Delicates
• Fabric Protection Cool-Down Care
• Easy-to-Follow Console Instructions
• 180° Wide-Opening Side-Swing Door Allows
for Convenient Access
SINGLE OPERATING THERMOSTAT
For simple accurate temperature control.
LARGE CAPACITY METERCASE
• Large Coin Box for Reduced Collections
• Accepts Coin Slide, Coin-Drop and Card
Reader Configurations
CSP2860TQ—27" Electric Stack Dryer with Dual Metercase
CSP2861TQ­—27" Gas Stack Dryer with Dual Metercase
Machine Accepts the Following Compatible
Payment Systems (not included):
— Coin Slide
— Retrofit Coin-Drop
— Retrofit Card Reader
• 7.4 Cu. Ft. Drum Capacity
• Push-to-Start Button, Rotary Controls
• 3 Cycles: Heavy-Duty (High Heat),
Normal (Medium Heat), and Delicates
(Low Heat)
• Balanced Airflow System
• Large Removable, Door-Mounted
Lint Screen
• Front Service Accessibility
• 3-Way Venting Upper Dryer (Back and
Sides); 4-Way, Multi-Vent Options
Lower Dryer (Back, Bottom, and Sides)
*Call 1-800-NO-BELTS for warranty details.
• Powdered Paint Top and Cabinet,
Removable In-Door Lint Filters, T40
Torx® and Pin Security Kit Included
• Optional Window Door Kit #W10791532
• Electric Model (2) Elements Rated at
5600 Watts, 240 Volt; (2) 30 Amp
Circuit Breakers Required
• Gas Model (2) 22K BTU Burners
• Two Motors: 1/3-HP Motor with
Built-In Overload Protector;
Centrifugal Switch Turns Off Heating
Element When Motor Stops
• Electric Models Require 2 Power Cords
(Sold Separately)
• Gas Models: Order 2 LP Conversion
Kits, Part #49572A
• Mechanical Dual Metercase Money
Acceptors Not Included (2 Required)
• 3-Year Limited Parts Only Warranty*
COMMERCIAL STACK DRYERS
Featuring Mechanical Controls
Whirlpool® Commercial Stack Dryers
Mechanical Controls
DRYER SPECIFICATIONS
MODELS
GENERAL INFORMATION
Stainless steel look push-button console, powdered
paint cabinet, improved collar assembly featuring
cam lock console, taller profile and improved security
metercase integral with collar, two coin box and money
acceptor openings, T40 Torx® & Pin security included,
removable in-door lint filters. Upper and lower dryers
may use different money acceptors at the same time.
3-way venting upper dryer, 4-way lower dryer.
DRUM VOLUME
MOTOR
ELECTRICAL REQUIREMENTS
HEATER TYPE
HEATER/BURNER RATING
(Add 500 Watts Approx. for Motor on all Dryer Models)
OPERATIONAL AMPERAGE
(Does Not Include Control or Gas Valve)
CSP2860TQ†
CSP2861TQ††
Dual Metercase Accepts the
Following Payment Systems:
Coin Slide
Retrofit Coin-Drop
Retrofit Card Reader
OPL Push-To-Start
Dual Metercase Accepts the
Following Payment Systems:
Coin Slide
Retrofit Coin-Drop
Retrofit Card Reader
OPL Push-To-Start
14.8 Cu. Ft.
(7.4 Cu. Ft. Per Drum)
Two 1/3-HP Motors with
Built-In Overload Protector,
5.9 Amps Max Rating
3 or 4-Wire Nominal 240/208
Volt, 60 Hz, A.C. Standard
30 Amp Breaker/Fuse Branch
Circuit per Dryer Drum
(Subject to Local Codes)
Electric
2 Heaters Rated at 5600 Watts
per Dryer (11.2 KW Total)
14.8 Cu. Ft.
(7.4 Cu. Ft. Per Drum)
Two 1/3-HP Motors with
Built-In Overload Protector,
5.9 Amps Max Rating
Nominal 120 Volt, 60 Hz, A.C.
Standard 15 Amp Breaker/Fuse
Branch Circuit per Dryer Drum
Motor – 4.0 Amps
No Load per Motor
8 Amps Total Heater 23.33
Amps @ 240V x 2, 54.66 Total
294 Lbs.
SHIPPING WEIGHT (Estimate)
DIMENSIONS
Width – in. (cm)
Depth – in. (cm)
Height – in. (cm)
27 (68.6 cm)
28.5 (72.39 cm)
76.375** (194 cm)
Gas*
2 Burner Assemblies Rated at
22,000 BTU per Dryer (44,000
BTU Total) Natural Gas
Motor – 4.0 Amps
No Load per Motor
8 Amps Total
Dimensions are for planning purposes
only. For complete information,
see installation instructions packed
with product.
FRONT VIEW
300 Lbs.
27 (68.6 cm)
28.5 (72.39 cm)
76.375** (194 cm)
*Burner orifices are available for manufactured, natural, mixed and LP gas with varying BTU ratings. **Height at metercase top.
†Power cords on electric models sold separately. ††LP Conversion Kit: 49572A. Energy information is available online at www.whirlpoolcommerciallaundry.com/products
Exhaust Information
All dryers require the equivalent of a 4-inch diameter exhaust duct. Rigid metal duct is recommended.
Failure to properly exhaust the dryer will result in improper operation.
# of 90°
turns
27" & 29" Dryer Venting Requirements
4" Hood
2 1⁄2" Hood
SIDE VIEW
Maximum length of 4" diameter
rigid metal duct
0
64 Ft.
58 Ft.
1
54 Ft.
48 Ft.
2
44 Ft.
38 Ft.
3
35 Ft.
29 Ft.
4
27 Ft.
21 Ft.
3-YEAR LIMITED PARTS
ONLY WARRANTY
For a period from the date of original purchase through
the time listed above, the designated parts that fail in
normal commercial use will be repaired or replaced free
of charge for the part itself, with the owner paying all
other costs, including labor, transportation and customs
duty. Chemical damage is excluded from all warranty
coverage. See complete warranty for details.
BACK VIEW
To Locate a Distributor Near You, Please Visit www.whirlpoolcommerciallaundry.com/distributor, or call 1-800-NO-BELTS
TORX is a registered Trademark of Textron Industries, Inc.
®/™ ©2015 Whirlpool. All rights reserved.
WY150058 3/15
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertising