Faber | MUDAMPER10 | Specifications | Faber MUDAMPER10 Specifications

Universal Make-up Air Damper
Bring fresh air back into the home and improve hood performance
Air switch at the hood duct
exit, activated by air flow,
opens the damper
outside to let in fresh air
Air switch lowers when
hood is off & tightly closes
the outside damper
The universal make up air Kit includes the following (ABOVE): 6 , 8, 10” switch assembly (left), 6, 8 or 10”
automatic return air damper (right) and 24 Volt plug in transformer (bottom)
Model #
Size
MUDAMPER6
MUDAMPER8
MUDAMPER10
Recommended CFM
6”
8”
10”
400 - 600 cfm
over 600 up to 1200 cfm
over 600 up to 1200 cfm
Recommended Installation
Attaches on top of the hood in
the ductwork and via low voltage
wire “talks” to the make-up air
damper
Opens when the
hood is on, closes
when the hood
is off
With higher cfm hoods
more air is exhausted in
tighter homes with less air
coming back in. To “make
up” for lost air, the
Universal Make up Air kit
brings fresh outside air into
the home through a
separate fresh air duct. The
automatic damper opens
inside the duct to bring
in air when the hood is
operating above 400 cfm
and closes tightly when the
hood is off.
Visit YouTube.com/FaberHoods
or scan the QR code with
your mobile device
Dimensional Diagrams
(see installation instructions for more information)
AIR FLOW SWITCH ASSEMBLY
(Located inside Range Hood Ducting)
MUDAMPER6 = 6”
MUDAMPER8 = 8”
MUDAMPER10 = 10”
AUTOMATIC MAKEUP AIR DAMPER
(Located inside Fresh Air Ducting)
MUDAMPER6 = 6”
MUDAMPER8 = 8”
MUDAMPER10 = 10”
FEATURES & ADVANTAGES
• Meets IRC (international residential code) M1503.4
• 24 Vac, 60 hz ac motor on damper
• Fresh air damper opens automatically when hood is operating, closes shut when fan is turned off
• Switch assembly attaches directly above the hood inside ducting
• Can be installed in all ducting configurations (vertical, horizontal, down or after elbows)
• Switch assembly fits inside all faber chimneys, compatible with all models over 300 cfm
• Simple installation: no drilling, calibrations or measuring required
• Designed and engineered to witstand heavy cooking contaminants (grease, steam, smoke and steam)
• Can be combined with most other hvac components and is a universal makeup air solution
• Reliable mechanical air switch prevents service issues and false tripping of system
Note: The fresh air damper is installed into a completely separate duct independent of the range hood ducting. The ductwork and makeup air damper are linked into your return air side of the central HVAC system OR a separate duct coming from the outside directly into
the kitchen. The air flow switch and damper are linked thru low voltage wiring. The plug-in 24 volt transformer is required when installing
the fresh air duct and damper directly thru the kitchen wall. Connecting to the Central HVAC system does not require the transformer. A
qualified HVAC professional should inspect your home to determine the best installation.
WARNING! Product specifications are subject to change without notification. Consult the installation instructions before you begin installing this range hood.
p.o. box 435 • Wayland, MA 01778 • tel: (508) 358-5353 • fax: (508) 358-5730 • e-mail: info@faberonline.com • www.faberonline.com
Rev. 08/14
Download PDF

advertising