Broan | AEEPD18SS | Spec sheet | Broan AEEPD6SS Spec Sheet

SPECIFICATION SHEET
EPD61 SERIES
RANGE HOOD
Especially designed to be installed outdoors
in a covered patio or lanai area. For use over
residential commercial-style cooking surfaces or
gas and electric grills. This unit is not for use with
a charcoal grill. A complete installation requires
several optional components. Refer to page 2 when
planning your installation.
SPECIFICATIONS
VOLTS
HZ
AMPS
CFM
SONES
DUCT
120
60
9.0 MAX.
1100
11.0
10” ROUND
C
UL
US
FEATURES
•
•
Professional outdoor design.
•
•
•
Brushed corrosion resistant 304 Stainless Steel.
•
Bright halogen lighting (2 x 50 watt GU10 for 36” hood,
3 x 50 watt GU10 for 48” hood) (bulbs not included).
•
3-speed rotary control - tested to assure operation in
corrosive environments.
•
304 Stainless Steel baffle filters - easily accessible and
dishwasher-safe.
•
•
Removable grease tray - easy to clean.
•
27” depth handles heat and size of outdoor grills.
(optional 3” wall extension to increase depth to 30”).
Two widths: 36’’ and 48’’.
Powerful, 1100 CFM internal blower - tested to assure
operation in corrosive environments.
Heat SentryTM detects excessive heat and adjusts blower
speed automatically.
UL Listed for use in damp locations when properly
connected to a GFCI circuit.
HVI-2100 CERTIFIED RATINGS comply with
new testing technologies and procedures
prescribed by the Home Ventilating Institute,
for off-the-shelf products, as they are available
to consumers. Product performance is rated at
0.1 in. static pressure, based on tests conducted
in a state-of-the-art test laboratory. Sones are a
measure of humanly-perceived loudness, based
on laboratory measurements.
WALL EXTENSION (optional)
•
Extends front of hood out an extra 3” (to 30”) - eliminates
custom wall bump-outs.
• Stainless Steel construction - matches range hood.
• Attaches to wall and back of range hood.
Model AWEPD36SS - 36’’ width
Model AWEPD48SS - 48’’ width
FLUE COVER (optional)
•
•
•
•
Stainless Steel construction - matches range hood.
Attaches to top of range hood shell.
Hides ducting and wipes clean easily.
Extended depth available for hoods using the 3” wall
extension.
Model AEEPD6SS - 6” high - for 8-ft. ceiling - standard depth
Model AEEPD6SSE - 6” high - for 8-ft. ceiling - extended depth
Model AEEPD18SS - 18” high - for 9-ft. ceiling - standard depth
Model AEEPD18SSE - 18” high - for 9-ft. ceiling - extended depth
Model AEEPD30SS - 30” high - for 10-ft. ceiling - standard depth
Model AEEPD30SSE - 30” high - for 10-ft. ceiling - extended depth
Model AEEPD2445SS - collapsed height: 24” - maximum height
45” - standard depth
Model AEEPD2445SSE - collapsed height: 24” - maximum height
45” - extended depth
Broan-NuTone LLC Hartford, Wisconsin www.broan.com 800-558-1711
Broan-NuTone Canada Mississauga, Ontario www.broan.ca 877-896-1119
REFERENCE
QTY.
REMARKS
Project
Location
Architect
Engineer
Contractor
Submitted by
31J
Date
99044958B
EPD61 SERIES
RANGE HOOD
EPD61 SERIES
HOOD SYSTEM
5½
Model 441
10” ROUND
WALL CAP
36
Model 437
HIGH CAPACITY
ROOF CAP
,4
8
Model 418
10” ROUND
ADJUSTABLE ELBOW
(Optional)
Model 410
10” ROUND DUCT
(2 ft. sections)
36,
48
AEEPD Series
DECORATIVE
FLUE
(Optional)
AWEPD SERIES
WALL EXTENSION
AEEPD Series
TELESCOPIC
FLUE COVER
(Optional)
EPD61 Series
RANGE HOOD
AEEPD SERIES
TELESCOPIC
FLUE COVER
24
45
AEEPD SERIES
FLUE COVER
Download PDF

advertising