Viking | SPHKDS | Installation instructions | Viking SPHKDS Installation Instructions

Viking SPHKDS Installation Instructions
INSTALLATION
INSTRUCTIONS
VIKING RANGE CORPORATION
111 FRONT STREET
GREENWOOD, MISSISSIPPI (MS) 38930 USA
(662) 455-1200
SPHKDS DESIGNER SERIES
SIDE PANEL HARDWARE KIT
For Use with Designer Series
Built-In Refrigerators/Wine Cellars
Retain for Future Reference
IMPORTANT - PLEASE READ AND FOLLOW
•These instructions are to be used in conjunction with the refrigerator/wine cellar installation instructions supplied with the product.
•Before beginning, please read these instructions completely and carefully.
•Do not remove permanently affixed labels, warnings, or plates from the product. This may void the warranty.
•Please observe all local and national codes and ordinances.
•The installer should leave these instructions with the consumer who should retain for local inspector’s use and for future
reference.
PARTS INCLUDED
REQUIRED TOOLS
(2)
(32)
Phillips head screwdriver
Z-Brackets
8-18 x 1/2” Phillips head screws
Installation Instructions
TO INSTALL (Refer to drawings on back):
1. Locate the custom wooden side panels.
2. Using the illustrations on the back, attach the Z-Brackets to the custom wooden panels using the 32 supplied
screws.
3. Slide the Z-Brackets into refrigerator/wine cellar side trim and slide panels into place.
4. NOTE: Adding 3/4” (1.9 cm) side panels adds an additional 3/4” (1.9 cm) to the overall width of the product for
each side panel used.
Z-Bracket
1”
(2.5 cm)
3/4” (1.9 cm) End Panel
1/4” (0.6 cm) Back Filler Panel
1/4”
(0.6 cm)
21 3/4”
(55.2 cm)
1/4”
(0.6 cm)
21 3/4”
(55.2 cm)
Detail
1” (2.5 cm)
1” (2.5 cm)
1” (2.5 cm)
1” (2.5 cm)
Z-Bracket
(From
hardware kit)
Fastens with
screws
supplied
Optional kickplate notch
Dimensions determined by
cabinets
3/4” (1.9 cm)
End Panel
A
24”
(61.0 cm)
24”
(61.0 cm)
Right Side Panel
Left Side Panel
30”
36”
42”
48”
82
82
82
82
W.
W.
W.
W.
Wine Cellar
Bottom Mount
Side-by-Side
Side-by-Side
7/8”
7/8”
7/8”
7/8”
A*
(210.5
(210.5
(210.5
(210.5
Optional kickplate notch
Dimensions determined by
cabinets
cm)
cm)
cm)
cm)
-
84
84
84
84
1/16”
1/16”
1/16”
1/16”
(213.5
(213.5
(213.5
(213.5
cm)
cm)
cm)
cm)
*Depending on how high leveling feet are raised and cabinet enclosure height.
VIKING RANGE CORPORATION
111 Front Street • Greenwood, Mississippi 38930 USA • (662-455-1200)
Specifications subject to change without notice
For more product information, call 1-888-VIKING1 (845-4641), or visit our web site at http://www.vikingrange.com
F20190A
(PS1203VR)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising