Trade-Wind | PSX006XL | Spec sheet | Trade-Wind PSX006XL Spec Sheet

Trade-Wind PSX006XL Spec Sheet
PRODUCT SPECIFICATIONS
In-Line Blower / Ventilator
Professional Series Models:
Model
Weight
Amps
CFM
PSX006XL
12 lbs
1.26
392
PSD008XL
19 lbs
2.99
836
PSD010XL
21 lbs
4.84
1266
Description
Featuring a galvanized steel housing with a powdercoat finish, Trade-Wind® In-Line Blowers are designed to be installed “in-line”
with a Trade-Wind® or comparable wood hood liner. These fans are specifically designed to provide efficient, high velocity air
movement by combining the best elements of high flow axial designs with the power of a centrifugal squirrel cage blower.
Direct Drive motor construction eliminates the need for continuous belt alignment, tension adjustments and maintenance.
Dimensions
Side View
Model
A
B
C
D
PSX006XL
6”
13 ¼”
6 ½”
8 ¼”
PSD008XL
8”
12 ½”
7”
15 ½”
PSD010XL
10”
14”
8”
15”
Above specifications apply to picture on right >
Typical Installation
Installation Considerations
(This applies to Illustration on the Left)
®
Trade-Wind In-Line Blower Mechanism (K), Duct Silencer (I),
Damper (E) and two Fast Clamps (H) which are placed on
each side of the Duct Silencer (I). This picture illustrates the
required progression but the orientation can /will vary. In other
Words, although the In-Line Blower and Duct Silencer in this
illustration are in a horizontal position, they can be installed at
any angle. Attic installations are highly recommended.
Note: In the illustration (left): F is the ducting elbow; G is the
duct pipe of some variable length for specific application;
J is the same as G but on the other side of the Duct
Silencer (I); and L is the Roof Cap or Wall Cap that is
to be sized the same sq in opening as duct pipe. The
A, B, C, and D are the specifications dictated by the
the customer's Designer or Builder...
To ensure the overall ventilation system operates as designed,
please carefully review the Installation Instructions included
with the individual products. These guidelines are the
manufacturer’s suggestions. Always observe local, municipal
and state building codes.
Revised 6/11/18
Copyright © 2018 Trade-Wind Manufacturing, LLC
Proverbs 22:29
WAR RAN TY
Remote/In-Line Blower
What IS Covered:
®
Trade-Wind Manufacturing, LLC warrants its Trade-Wind Remote/ In-Line Blower ventilation products to the original
P
user, to be free of defects in materials and workmanship for one (1) year from the date of purchase.
Trade-Wind Manufacturing, LLC at its option, will repair or replace the complete unit or any defective component
without charge. This warranty may be voided if any unauthorized service, alterations, or repairs are made to the
product.
What is NOT Covered :




Normal maintenance and service of any product that has been subject to misuse, negligence, accident or
installation inconsistent with the recommended installation instructions.
Product used other than for normal in-home use or products used outside of the United States and Canada.
Damage to the product caused by accident, fire, flood or other acts of God.
Service calls to educate the customer in the proper use and care of the product, correct faulty installation,
change fuses or reset breakers.
Trade-Wind Manufacturing, LLC. disclaims and excludes any liability for implied warranties or for incidental or
consequential damages wherever permitted by law. There are no implied warranties of merchantability or fitness
for a particular use or purpose. This warranty gives you specific legal rights and you may also have other rights,
which vary from state to state.
®
For Repair: If you need repair on your Trade-Wind Remote/ In-Line Blower Ventilation Product, visit our website
at: www.t-wusa.com and click on the "Contact Us" tab. Fill out the simple form providing the model number, date of
purchase, and brief description of the problem. Proof of purchase will also be required.
Warranty Revised 6/11/18
Trade-Wind Manufacturing, LLC has a policy of continuous improvements and reserves the right to modify (at any time
and without notice) any or all of its products, features, designs, components and specifications. For exact
dimensions, see the Installation Instructions included with each product. Some features may be slightly different
than shown on product literature.
®
For more information, please contact your dealer or Trade-Wind Representative
800 West Grant Street, Phoenix, AZ 85007
1-800-955-5737
602-900-8500
t-wusa.com
Revised 6/11/18
Copyright © 2018 Trade-Wind Manufacturing, LLC
Proverbs 22:29
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising