SPECIFICATION SHEET K41 SERIES RANGE HOODS Class pyramidal lines create a statement of simple elegance. FEATURES • • • • • min 33" • • • • Polished Brass, Brushed Copper Widths: 30”, 36” Telescopic flue accommodates 8’ to 9’ ceilings 6” round duct connector/backdraft damper Convertible to non-ducted operation (for 8’ to 9’ ceilings only - requires Model No. REKITK41 sold separately) Halogen lighting (2 x 20 watt, MR16 - bulbs included) Slide controls: on-off, infinite speed Single centrifugal blower Dishwasher-safe filter features a quick-release latch and decorative cover plate Heat SentryTM - automatically turns blower to high speed when excess cooking heat is detected max 47" • Italian design • Wall mount • Finishes: 304 Stainless Steel #4 Brushed, White, Black, OPTIONS • Backsplash available (Model BSK1) • Accent trim in contrasting or complementary • • • • finishes (Model No. FTK41) Flue extension for 10’ ceiling (ducted only) (Model No. FEXTK42) (31-7/8” long) Recirculating filter (Model No. ROUND FILTER) Replacement grease filters available Replacement bulb (Part No. SB02300668) Mount range hood so bottom of hood is 24” minimum above cooking surface. SPECIFICATIONS VOLTS AMPS CFM SONES DUCT 120 3.13 500 8.0 6” round HVI-2100 CERTIFIED RATINGS comply with new testing technologies and procedures prescribed by the Home Ventilating Institute, for off-the-shelf products, as they are available to consumers. Product performance is rated at 0.1 in. static pressure, based on tests conducted in AMCA’s state-of-the-art test laboratory. Sones are a measure of humanly-perceived loudness, based on laboratory measurements. BEST BY BROAN P.O. BOX 140 HARTFORD, WISCONSIN 53027 REFERENCE QTY. REMARKS Project Location Architect Engineer Contractor Submitted by 50J Date 99042839C K41 SERIES WIRING Air Outlet Ø 5-7/8” Wiring Box 4-1/4” K41 SERIES MOUNTING FRAMING BEHIND WOOD CROSS SUPPORT STUD WOOD CROSS SUPPORT – SECURED TO FRAMING AND LOCATED BEHIND DRYWALL L C L 3 3 4 " DRYWALL 3 3 4 " 2 STUD MOUNTING BRACKET LOCATION (ABOVE 36” HIGH COOKTOP) MOUNTING DISTANCE ABOVE 36” HIGH COOKTOP (SEE NOTE BELOW) CEILING HEIGHT DUCT METHOD 24” 25” 26” 27” 28” 29” 30” 41-3/16” 42-3/16” 41-3/16” 42-3/16” 41-3/16” 42-3/16” MOUNTING BRACKET LOCATION ABOVE 36” HIGH COOK TOP 8 FEET DUCTED OR NONDUCTED with REKITK41 9 FEET DUCTED NONDUCTED with REKITK41 DUCTED WITH FEXTK42 10 FEET 36-3/16” 37-3/16” 38-3/16” 39-3/16” 37-3/16” 38-3/16” 39-3/16” 38-3/16” 39-3/16” 40-3/16” 40-3/16” 3 16 " NOTE: Minimum hood distance above cooktop must not be less than 24”. A maximum of 30” above the cooktop is highly recommended for best capture of cooking impurities. Distances over 30” are at the installer and users’ discretion; and if ceiling height and flue length permit. BEST BY BROAN P.O. BOX 140 HARTFORD, WISCONSIN 53027