Best | ABWPD36SB | Specifications | Best ABWPD36SB Specifications

SPECIFICATION SHEET
WPD28I SERIES
RANGE HOOD
HB0042
Especially designed to be installed outdoor
in a covered patio or lanai area. For use over
residential commercial-style cooking surfaces or
gas and electric grills. This unit is not for use with
a charcoal grill. A complete installation requires
several optional components. Refer to page 2 when
planning your installation.
FEATURES
•
•
•
•
•
•
•
Corrosion resistant 316 Stainless Steel construction
UL Listed for use in damp locations when properly
connected to a GFCI circuit.
Hood width: 36’’ or 48’’
Halogen lighting (2 x 50 watt GU10 for 36” hood,
4 x 50 watt GU10 for 48” hood) lamps included
Switch controls: Lighting, on-off, and infinite speed
Easily accessible, dishwasher-safe stainless steel
baffle filters
Heat Sentry turns blower ON to HIGH speed when
excess heat is detected
10” m)
(254 m
OPTION
•
•
•
•
•
HK0082A
Backsplash (ABWPD Series): Widths - 36’’ and 48’’
Stainless Steel construction - protects back wall
and wipes clean easily
Decorative flue (AEWPD Series): Widths - 36’’ and 48’’
Stainless Steel construction - hides ducting and wipes
clean easily
Designed for use with interior blower model P12D (purchase
separately)
m)
18” m)
(102 m
(457 m 4”
16” m)
(406 m
HA0047A
14” mm)
(356
r 48”
36” o 219 mm)
1
r
o
(914
HA0046A
Decorative flue
AEWPD Series
Backsplash ABWPD Series
SPECIFICATIONS
120 VAC, 60 Hz
Amps for 36” hood (without blower): 0.8 A
Amps for 48” hood (without blower): 1.7 A
C
UL
US
BEST Hartford, Wisconsin www.BestRangeHoods.com 800-558-1711
BEST Drummondville, QC, Canada www.BestRangeHoods.com 866-737-7770
REFERENCE
QTY.
REMARKS
Project
Location
Architect
Engineer
Contractor
Submitted by
01A
Date
99043651B
WPD28I
HOOD SYSTEM
Model 437
(High capacity roof cap)
Model 441
(10” Rd wall cap)
Model 418
10” Round adjustable
elbow (optional)
Model 421 (optional)
(10” Round vertical in-line damper)
Model 410
(10” Round duct - 2 ft. sections)
Model SV03428 transition
(9” x 18” to 10” round)
(included with hood)
AEWPD Series
SOFFIT CHIMNEY
(Optional, required only for
soffit-less installation)
WPD28I HOOD
(Canopy with blower control & lighting.
Required for all installations)
MODEL P12D BLOWER
(Interior Blower,
sold separately)
ABWPD Series
BACKSPLASH
(Stainless steel wall covering
with shelves. Optional.)
HL0038
-3-
Download PDF

advertising