WarmlyYours | SCV-DUAL | Features | WarmlyYours SCV-DUAL Features

WarmlyYours SCV-DUAL Features
SCV-DUAL
SCP-120
PREMIUM
SNOW
MELT
CONTROL
VALUE
SNOW
MELT
CONTROL
FEATURES & BENEFITS
Automatic snow and ice melting controller
minimizes operating costs.
Automatic voltage selection operates from
100VAC-240VAC.
Adjustable hold-on time and temperature set
point provides flexibility for a wide range of
applications.
Minimize
Operating Costs
Weather-resistant NEMA 3R enclosure.
Hold-on timer continues heater operation after
snow stops to ensure complete melting.
Sno-Test™ automatic testing and manual heater
cycle for system testing.
Automatic and
manual-override
operator controls
Simple four-wire installation.
C-UL-US Listed for Temperature
Regulating Equipment.
Easy to Operate
01
SCV-DUAL
SCP-120
VALUE SNOW MELT CONTROL
About the Value Snow Melt Control
This configurable aerial snow-melting controller makes automatic snow melting cost-effective in even the
smallest applications. Heaters operate at temperatures below the default set point (38°F or 3.3°C) only
when the sensor detects precipitation at temperatures below 38°F. Plus, the adjustable hold-on period (3
hours default) continues heater operation after snow stops to ensure complete melting.
The SCV-DUAL controller includes an internal magnetic reed switch used for manual heater cycling, as
well as configuring the temperature set point and the hold-on time. The controller operates from 100 to
240 VAC to work with a wide variety of applications. It also controls heater loads up to 16 amps.
PRODUCTS
SCV-DUAL
Value Snow
Melt Control
SMP
Snow Melting
Plaque
RLY-Series
Relay Panels
(Optional)
02
SCV-DUAL
VALUE SNOW MELT CONTROL
Specifications
SCV-DUAL Value Snow Melt Control
Area of use
Approvals
Protection
Cover attachment
Entries
Material
Mounting
Dimensions
Supply voltage
Load
Heater Hold-On timer
Set point temperature
Status indicators
Wire and Cable Ratings
Power cable
Heater cable
Environmental
Operating temperature
Storage temperature
Nonhazardous locations
UL Listed 109R Type 873 Temperature Regulating Equipment
NEMA 3R
Polycarbonate with machine screws
1 x 3/4” entry (bottom)
Polycarbonate
Pole mount
4.6” (W) x 6.1” (H) / 117mm (W) x 155mm (H)
ETI PN 24619: 100VAC – 240VAC; 50/60 Hz
3 amp maximum inductive
16 amp maximum resistive
0, 1, 3 (default) or 5 hours; configured by magnetic reed switch
Off (moisture only), 36°F, 38°F (default), 40°F ; configured
by magnetic reed switch
SUPPLY (green): Power on; will flash while in configuration mode
HEAT (yellow): Heating cycle in progress
Size for heater load (16 amps maximum)
Size for maximum heater load
–40°F to 104°F (–40°C to 40°C)
−67°F to 167°F (−55°C to 75°C)
RLY-Series
Model
RLY-4PL
Enclosure
NEMA 1
Dimensions
10” x 8” x 4” (254mm x 203mm x 102mm)
Contains
2 relays for a total of 4 poles
Controls
4 circuits at 120 VAC or 277 VAC or 2 circuits at 208 VAC or 240 VAC
Model
RLY-8PL
Enclosure
NEMA 1
Dimensions
12” x 10” x 4” (305mm x 254mm x 102mm)
Contains
4 relays for a total of 8 poles
Controls
8 circuits at 120 VAC or 277 VAC or 4 circuits at 208 VAC or 240 VAC
Model
RLY-12PL
Enclosure
NEMA 1
Dimensions
16” x 12” x 4” (406mm x 305mm x 102mm)
Contains
6 relays for a total of 12 poles
Controls
12 circuits at 120 VAC or 277 VAC or 6 circuits at 208 VAC or 240 VAC
NOTE: Relays do NOT contain circuit breaker devices.
Optional for loads under 16 AMPS.
Required for larger AMP loads
ORDERING
Accessories
SMP
RLY-Series
LIMITED WARRANTY
Snow Melting Plaque
Relay Panels (Optional)
WarmlyYours’ two year limited warranty covering defects in workmanship and materials applies.
Contact Warmly Yours at (800) 875-5285 or go to www.WarmlyYours.com for complete information
For more information, operating and
technical manuals, please refer to
www.warmlyyours.com.
*Product specifications
are subject to change.
03
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising