Fisher Paykel | TK30CMOX1 | Planning Guide | Fisher Paykel TK30CMOX1 Planning Guide

Fisher Paykel TK30CMOX1 Planning Guide
PLANNING GUIDE
TKCFP307
Convection Microwave Trim Kit
Flush Mount
1
19 8 "
5
19 8 "
Cabinet
Opening
Frame
Height
29 7
8"
30"
Cabinet Width
7
8"
Frame Depth
Frame Width
For replacement parts or if further help is needed concerning this appliance call:
Toll Free 1 888 9 FNP USA (1 888 936 7872) or write to:
Fisher & Paykel Appliances Inc., 5900 Skylab Road, Huntington Beach, CA 92647
or contact us through our web site: www.fisherpaykel.com
11
20 16 "
Minimum Depth
PLANNING GUIDE
TKCFP307
Convection Microwave Trim Kit
Surface Mount
Frame Width
Frame
Depth
7
29 8 "
7
8"
Frame
Height
Cutout
Height
5
19 8 "
7
15 8 " 1/8"
Minimum Depth
11
20 16 "
Distance
from shelf to cutout
Cutout Width
15
25 16 " 1/8"
1
2 16 "
For replacement parts or if further help is needed concerning this appliance call:
Toll Free 1 888 9 FNP USA (1 888 936 7872) or write to:
Fisher & Paykel Appliances Inc., 5900 Skylab Road, Huntington Beach, CA 92647
or contact us through our web site: www.fisherpaykel.com
Installation Instruction of Fan Box
for convection microwave trim kits
Important Information
1-1/2” - 2”-Inch
(40mm - 50mm)
1)
After installing the runners, plug-in the 12VDC transformer
and place the cord along the right side of the cabinet.
2)
Before peeling off the PVC coating from the stainless steel frame,
slide-in the Fan Box as shown in the image below. Plug-in the
12V supply and position the Fan Box approx. 1-1/2” to 2”-Inch set
back from the face of the microwave.
Fan Box
Microwave
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising