Coolsculpting Reduction Of Body Fat

Coolsculpting: Reduction Of Body Fat
Cryolipolysis is a technology developed to reduce the fats. This discovery led to the
development of the non-invasive procedure called Coolsculpting in Boston. During the
procedure there is a precise, controlled and safe cooling of the tissue that result in a
selective damage of the fat without damaging other tissues. Subsequently, the body
gradually eliminates fat cells through regular metabolic processes. There are a many
doctors for Coolsculpting Treatment in Boston who can assure you the best treatment.
What is CoolSculpting?
 CoolSculpting is a procedure approved by the FDA, the European Community and
the Federal Commission for the Protection against Sanitary Risks for the reduction
of body fat.
 The Coolsculpting Boston uses a patented method called Criolipolysis, which
consists of controlled cooling to eliminate fat. Designed solely to destroy fat cells
without causing the skin or tissue lesions that usually occur with more invasive
procedures such as liposuction , or other systems of cryolipolysis, this nonsurgical procedure may be the most appropriate for patients who only need to
reduce adiposity located, resistant to diet and exercise and that are not willing to
undergo surgery.
 It is a technology that approaches 50 years of research and is carrying out
successful localized adiposity reduction treatments.
Coolsculpting Vs other cryolipolysis?
There are several benefits and advantages of doing the treatment with CoolSculpting.
 Coolsculpting has the cryolipolysis patent, having so many years of research every
time this technology has become more secure as I am referring, the equipment has
to reach a temperature of -10º C, so it has sensors security that detect the
temperature at which the equipment must be in contact with our skin in this way to
avoid the risk of burns or necrosis.
 An exclusive membrane of the CoolSculpting brand was also designed, which
serves to protect the skin giving greater security to the treatment.
 On the other hand, the cooling parameters and the treatment time are given by the
equipment, that is, they are not dependent on the operator, and therefore the
equipment already has the necessary sensors. If at a certain moment they detect a
lower temperature or higher, they will stop immediately to avoid any problem,
unlike other equipment which is operated by an operator.
 Another important point to highlight about Coolsculpting Near Me is that it is
approved by sanitary regulatory bodies in Mexico, Europe and the United States,
unlike other equipment, this means that they do not necessarily comply with the
safety or efficacy of the treatment.
How is the CoolSculpting Treatment?
A specially designed applicator generates a gentle vacuum pressure to introduce the skin
to be treated between the 2 cooling panels.
 When the procedure begins at Best Place for Coolsculpting, you feel a cold
sensation in the treated area. This sensation disappears in a few minutes.
 During the procedure you can remain seated or lying down, depending on the area
to be treated.
 The treatment lasts between one and three hours depending on the areas you wish
to treat.
 Cool Sculpting is not a way to lose weight or treat obesity, nor is it a substitute for
other invasive methods such as liposuction.
Download PDF

advertising