Panasonic DMCGX8SG Operating Instructions

DMC-GX8WC_SG-SQT1122_eng.book 1 ページ
２０１５年８月２１日
金曜日
午前８時２９分
Basic Operating Instructions
Digital Camera/
Double Zoom Lens Kit
Model No.
DMC-GX8WC
Please read these instructions carefully before using this product, and
save this manual for future use.
More detailed instructions on the operation of this camera are
contained in “Operating Instructions for advanced features (PDF
format)” in the supplied DVD.
SQT1122
SG
F0815YD0
until
2015/9/2
DMC-GX8WC_SG-SQT1122_eng.book 2 ページ
２０１５年８月２１日
金曜日
午前８時２９分
Dear Customer,
We would like to take this opportunity to thank you for purchasing this Panasonic Digital
Camera. Please read these Operating Instructions carefully and keep them handy for
future reference. Please note that the actual controls and components, menu items, etc. of
your Digital Camera may look somewhat different from those shown in the illustrations in
these Operating Instructions.
Carefully observe copyright laws.
• Recording of pre-recorded tapes or discs or other published or broadcast material for purposes
other than your own private use may infringe copyright laws. Even for the purpose of private
use, recording of certain material may be restricted.
Information for Your Safety
WARNING:
To reduce the risk of fire, electric shock or product damage,
• Do not expose this unit to rain, moisture, dripping or splashing.
• Use only the recommended accessories.
• Do not remove covers.
• Do not repair this unit by yourself. Refer servicing to qualified service personnel.
The socket outlet shall be installed near the equipment and shall be easily accessible.
∫ Product identification marking
Product
2
Location
Digital Camera
Bottom
Battery charger
Bottom
SQT1122 (ENG)
DMC-GX8WC_SG-SQT1122_eng.book 3 ページ
２０１５年８月２１日
金曜日
午前８時２９分
∫ About the battery pack
CAUTION
• Danger of explosion if battery is incorrectly replaced. Replace only with the type
recommended by the manufacturer.
• When disposing of the batteries, please contact your local authorities or dealer and ask for
the correct method of disposal.
• Do not heat or expose to flame.
• Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time with
doors and windows closed.
Warning
Risk of fire, explosion and burns. Do not disassemble, heat above 60 xC or incinerate.
∫ About the battery charger
CAUTION!
To reduce the risk of fire, electric shock or product damage,
• Do not install or place this unit in a bookcase, built-in cabinet or in another confined
space. Ensure this unit is well ventilated.
• The battery charger is in the standby condition when the AC power supply cord is connected.
The primary circuit is always “live” as long as the power cord is connected to an electrical
outlet.
(ENG) SQT1122
3
DMC-GX8WC_SG-SQT1122_eng.book 4 ページ
２０１５年８月２１日
金曜日
午前８時２９分
Cautions for Use
• Do not use any other USB connection cables except the supplied one or a genuine Panasonic
USB connection cable (DMW-USBC1: optional).
• Use a “High Speed HDMI micro cable” with the HDMI logo.
Cables that do not comply with the HDMI standards will not work.
“High Speed HDMI micro cable” (Type D– Type A plug, up to 2 m long)
• Always use a genuine Panasonic AV cable (DMW-AVC1: optional).
• Always use a genuine Panasonic shutter remote control (DMW-RSL1: optional).
Keep this unit as far away as possible from electromagnetic equipment (such as
microwave ovens, TVs, video games etc.).
• If you use this unit on top of or near a TV, the pictures and/or sound on this unit may be
disrupted by electromagnetic wave radiation.
• Do not use this unit near cell phones because doing so may result in noise adversely affecting
the pictures and/or sound.
• Recorded data may be damaged, or pictures may be distorted, by strong magnetic fields
created by speakers or large motors.
• Electromagnetic wave radiation may adversely affect this unit, disturbing the pictures and/or
sound.
• If this unit is adversely affected by electromagnetic equipment and stops functioning properly,
turn this unit off and remove the battery or disconnect AC adaptor (DMW-AC10: optional). Then
reinsert the battery or reconnect AC adaptor and turn this unit on.
Do not use this unit near radio transmitters or high-voltage lines.
• If you record near radio transmitters or high-voltage lines, the recorded pictures and/or sound
may be adversely affected.
4
SQT1122 (ENG)
DMC-GX8WC_SG-SQT1122_eng.book 5 ページ
２０１５年８月２１日
金曜日
午前８時２９分
• Before cleaning the camera, remove the battery or the DC coupler (DMW-DCC8:
optional), or disconnect the power plug from the outlet.
• Do not press the monitor with excessive force.
• Do not press the lens with excessive force.
• Do not spray the camera with insecticides or volatile chemicals.
• Do not keep rubber or plastic products in contact with the camera for a long period of time.
• Do not use solvents such as benzine, thinner, alcohol, kitchen detergents, etc., to clean
the camera, since it may deteriorate the external case or the coating may peel off.
• Do not leave the camera with the lens facing the sun, as rays of light from the sun may
cause it to malfunction.
• Always use the supplied cords and cables.
• Do not extend the cords or the cables.
• During access (image writing, reading and deleting, formatting etc.), do not turn this unit
off, remove the battery, card or disconnect the AC adaptor (DMW-AC10: optional).
Furthermore, do not subject the camera to vibration, impact or static electricity.
• The data on the card may be damaged or lost due to electromagnetic waves, static electricity or
breakdown of the camera or the card. We recommend storing important data on a PC etc.
• Do not format the card on your PC or other equipment. Format it on the camera only to ensure
proper operation.
• The battery is not charged when the camera is shipped. Charge the battery before use.
• The battery is a rechargeable lithium ion battery. If the temperature is too high or too
low, the operating time of the battery will become shorter.
• The battery becomes warm after using and during and after charging. The camera also
becomes warm during use. This is not a malfunction.
• Do not leave any metal items (such as clips) near the contact areas of the power plug or
near the batteries.
• Store the battery in a cool and dry place with a relatively stable temperature: [Recommended
temperature: 15 oC to 25 oC, Recommended humidity: 40%RH to 60%RH]
• Do not store the battery for a long time while fully charged. When storing the battery for a
long period of time, we recommend charging it once a year. Remove the battery from the
camera and store it again after it has completely discharged.
(ENG) SQT1122
5
DMC-GX8WC_SG-SQT1122_eng.book 6 ページ
２０１５年８月２１日
Contents
Information for Your Safety .................2
• Cautions for Use ..............................4
Preparation/Basic
Care of the camera ...............................8
Standard Accessories ..........................9
Names and Functions of
Components........................................10
Preparation..........................................14
• Attaching the Shoulder Strap .........14
• Charging the Battery ......................15
• Inserting/Removing the Battery......16
• Inserting/Removing the Card
(Optional).......................................16
• Formatting the card
(initialisation)..................................17
• Attaching/Removing the Lens ........18
• Opening the Monitor ......................18
• Setting Date/Time (Clock Set) .......19
Basic Operations ................................20
• Using the Viewfinder ......................20
• Shutter button (Taking pictures) .....21
• Motion picture button
(Recording motion pictures) ..........21
• Mode dial
(Selecting a Recording Mode) .......22
• Cursor buttons/
[MENU/SET] button .......................22
• Front Dial/Rear Dial .......................23
• [LVF] button (Switching the
Monitor/Viewfinder)........................24
• Touch screen (Touch operations)...24
Setting menu items ............................25
Calling frequently-used menus
instantly (Quick Menu) .......................26
Assigning frequently used
functions to the buttons
(function buttons) ...............................26
6
SQT1122 (ENG)
金曜日
午前８時２９分
Recording
Taking Pictures using the Automatic
Function (Intelligent Auto Mode) ...... 27
• Recording night scenes
([iHandheld Night Shot])................ 27
• Combining pictures into a single
picture with rich gradation
([iHDR]) ......................................... 28
• Taking a picture with a blurred
background (Defocus Control) ...... 28
• Recording images by changing
the brightness (Exposure) or
colour tone .................................... 28
Recording motion pictures with
manually set aperture value/
shutter speed
(Creative Video Mode) ....................... 29
Setting the Picture Quality
and Size .............................................. 30
• Setting the aspect ratio of
pictures ......................................... 30
• Setting the number of pixels ......... 30
• Setting the compression rate of
pictures ([Quality])......................... 31
Adjusting Focus Manually ................ 32
Select a Drive Mode ........................... 33
Recording 4K Photos ........................ 34
• Selecting pictures from
4K burst file and saving................. 35
Image Stabiliser.................................. 36
Recording Motion Picture ................. 38
• Recording motion pictures in 4K ... 40
DMC-GX8WC_SG-SQT1122_eng.book 7 ページ
２０１５年８月２１日
金曜日
午前８時２９分
Playback
Others
Playing Back Pictures........................ 41
Playing Back Motion Pictures........... 41
Deleting Pictures................................ 42
Using the [Playback] Menu ............... 43
• [RAW Processing] ......................... 43
About the supplied software .............51
Monitor Display/
Viewfinder Display..............................52
Menu list ..............................................56
Troubleshooting .................................58
Specifications .....................................64
Digital Camera Accessory System ...69
Reading the Operating Instructions
(PDF format)........................................70
Wi-Fi/NFC
What you can do with the Wi-FiR
function ............................................... 45
Controlling with a Smartphone/
Tablet................................................... 45
• Installing the smartphone/
tablet app “Image App” ................. 45
Connecting to a smartphone/
tablet.................................................... 46
• Taking images via a smartphone/
tablet (remote recording)............... 48
• Playing back images
in the camera ................................ 48
• Saving images stored
in the camera ................................ 49
• Sending images in the camera
to an SNS...................................... 49
• Adding location information
to images stored in the camera
from a smartphone/tablet .............. 50
• Combining motion pictures
recorded with Snap Movie
according to your preference
on a smartphone/tablet ................. 50
(ENG) SQT1122
7
DMC-GX8WC_SG-SQT1122_eng.book 8 ページ
２０１５年８月２１日
金曜日
午前８時２９分
Preparation/Basic
Care of the camera
To avoid damaging your camera and to experience the maximum enjoyment you
should exercise the following precautions.
• The lens, monitor and the camera body can sustain damage if the camera body is dropped or
subjected to excessive temperature, moisture, water or dust.
• The monitor can be damaged if excessive pressure is applied to the screen surface, during
actual use or while cleaning.
∫ Splash Proof
Splash Proof is a term used to describe an extra level of protection this camera offers against
exposure to a minimal amount of moisture, water or dust. Splash Proof does not guarantee that
damage will not occur if this camera is subjected to direct contact with water.
In order to minimise the possibility of damage please be sure the following precautions are taken:
– The Splash Proof feature works in conjunction with the H-HS12035 and H-HS35100 lenses
that were specifically designed to support this feature.
– Make sure that all doors are securely closed.
– Make sure that you are in a dry and secure place when changing the battery, lens or memory
card. After changing, make sure their protective doors are securely closed.
– If this camera is exposed to water, sand or any other foreign material clean it as soon as possible,
taking the necessary precautions that the foreign substance does not get inside the camera.
– Under no circumstances should you touch or place any foreign objects within the camera or
in close proximity of the camera’s image sensor.
If sand, dust, or liquids such as water droplets adhere to the monitor, wipe them off with a dry soft cloth.
– Not doing so may cause the monitor to respond incorrectly to touch operations.
– If the monitor is closed when such liquids are present, malfunction may result.
∫ Condensation
• Condensation may occur on the lens, monitor or in the viewfinder when the room temperature
or humidity changes rapidly. This may cause the image to temporarily become hazy. If this
occurs, turn the camera off and allow the camera to sit in a temperature stable environment for
several minutes. It will clear by itself.
• If you know that you will be moving between areas where there will be a large change in
temperature or humidity, you can help prevent condensation forming on the camera by placing
the camera in a large plastic zipper bag, so condensation will form on the bag, not the camera.
Allow the temperature to stabilise before removing the camera from the bag.
About the firmware of your interchangeable lens
For smoother recording, we recommend updating the firmware of the interchangeable lens
to the latest version.
• To view the latest information on the firmware or to download the firmware, visit the
support site below:
http://panasonic.jp/support/global/cs/dsc/
(This Site is English only.)
• To check the firmware version of the interchangeable lens, attach it to the camera body and
select [Version Disp.] in the [Setup] menu.
8
SQT1122 (ENG)
DMC-GX8WC_SG-SQT1122_eng.book 9 ページ
２０１５年８月２１日
金曜日
午前８時２９分
Preparation/Basic
Standard Accessories
Check that all the accessories are supplied before using the camera.
Product numbers correct as of July 2015. These may be subject to change.
Digital Camera Body
(This is referred to as camera body in these operating instructions.)
1
2
3
4
5
6
7
8
9
10
11
12
13
Interchangeable Lens¢1,4
Lens Hood
Lens Cap¢2
Lens Rear Cap¢2
Body Cap¢3
Battery Pack
(Indicated as battery pack or battery in the text)
Charge the battery before use.
Battery Charger
(Indicated as battery charger or charger in the text)
AC Cable
USB Connection Cable
DVD
• Software:
Use it to install the software to your PC.
• Operating Instructions for advanced features
Leather Body Case/
Shoulder Strap
Hot shoe cover¢3
A: Black
B: Silver
Eyecup¢3
DMC-GX8WC
1
H-FS1442A H-FS45150
2
VYC1113
VYC1090
VYF3510
VYF3201
VFC4605
VFC4605
3
4
5
6
VKF4971
8
7
DMW-BLC12E
DE-A80D
9
10
¢1 This is referred to as lens in these operating
instructions.
SFM0084
K2CA2YY00247 K1HY08YY0031
¢2 This is attached to the interchangeable lens at
11
12
13
the time of purchase.
¢3 This is attached to the camera body at the time
: SYQ0510
of purchase.
SYQ0503
: SYQ0511
SFC0359
¢4 The interchangeable lenses (H-FS1442A/
H-FS45150) included in DMC-GX8WC are not dust- and splash-proof.
• SD Memory Card, SDHC Memory Card and SDXC Memory Card are indicated as card in the
text.
• The card is optional.
• Description in these operating instructions is based on the interchangeable lens (H-FS1442A).
• Consult the dealer or Panasonic if you lose the supplied accessories. (You can purchase the
accessories separately.)
(ENG) SQT1122
9
DMC-GX8WC_SG-SQT1122_eng.book 10 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Preparation/Basic
Names and Functions of Components
∫ Camera body
1
2
5
11 12
13 14 15
6
7
8
9
16
17
10
18
19 3 4
19
25
1
Status indicator (P19)/
Wi-Fi® connection lamp
• The lamp lights green when the camera is
turned on, and lights blue when it is
connected to Wi-Fi.
24 23 22 21
14
Stereo microphone
• Be careful not to cover the microphone with
your finger. Doing so may make sound
difficult to record.
15 Focus distance reference mark
2 Camera ON/OFF switch (P19)
3 [Fn] button (Fn1) (P26)
20
16
4 Motion picture button (P38)
[REMOTE/MIC] socket
• An external microphone (optional) can
record higher quality audio than the built-in
microphone.
5 Function button (Fn13) (P26)
17 [AV OUT/DIGITAL] socket
6 Rear dial (P23)
18 [HDMI] socket
7 Shutter button (P21)
19 Shoulder strap eyelet (P14)
8 Front dial (P23)
9
Self-timer indicator/
AF Assist Lamp
10 Function button (Fn7) (P26)
11 Exposure compensation dial (P28)
Mode dial (P22)
12 • Rotate the mode dial to switch the Recording
Mode.
Hot shoe (Hot shoe cover) (P14)
13 • Keep the Hot Shoe Cover out of reach of
children to prevent swallowing.
10
SQT1122 (ENG)
20
Speaker
• Be careful not to cover the speaker with your
finger. Doing so may make sound difficult to
hear.
21 Lens release button (P18)
22 Lens lock pin
23 Mount
24 Sensor
25 Lens fitting mark (P18)
DMC-GX8WC_SG-SQT1122_eng.book 11 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Preparation/Basic
27 28 29
34
35
36
33
30 31 32
37
26
38
41
42
39
40
46
45 44 43
26 Touch screen (P24)/monitor (P52)
39 [MENU/SET] button (P25)
27 Viewfinder (P24)
40 NFC antenna [
41 [Fn] button (Fn4) (P26)
Eyecup
28 • Keep the Eyecup out of reach of children to
prevent swallowing.
29 Eye sensor (P24)
[Q.MENU] button (P26)/
30 Function button (Fn2) (P26)
31 [(] (Playback) button (P41)
[DISP.] button
32 • Each time this is pressed, the display on the
monitor is switched.
33 Diopter adjustment dial (P20)
[LVF] button (P24)/
34 Function button (Fn6) (P26)
35 [Fn] button (Fn5) (P26)
36 Focus mode lever (P32)
37 [AF/AE LOCK] button
Cursor buttons (P22)
3/[
] (ISO sensitivity)
1/[
38 2/[
4/[
] (P47, 49)
[
] (Delete/Cancel) button (P42)/
42 Function button (Fn3) (P26)
DC coupler cover
• When using an AC adaptor, ensure that the
Panasonic DC coupler (DMW-DCC8:
optional) and AC adaptor (DMW-AC10:
43 optional) are used.
• Always use a genuine Panasonic AC
adaptor (DMW-AC10: optional).
• When using an AC adaptor, use the AC
cable supplied with the AC adaptor.
44 Release lever (P16)
45 Card/Battery door (P16)
Tripod mount
• It may not be possible to attach and securely
46 fasten a tripod with a screw length of 5.5 mm
or more to the camera. Doing so may also
damage the camera.
] (White Balance)
] (Auto Focus Mode)
] (Drive mode) (P33)
– Single (P33)/Burst/4K Photo (P34)/
Auto bracket/Self-timer
(ENG) SQT1122
11
DMC-GX8WC_SG-SQT1122_eng.book 12 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Preparation/Basic
∫ Lens
H-FS1442A
1 2
1
2
3
4
H-FS45150
3 4 5
Lens surface
Tele
Focus ring (P32)
Zoom ring
6
7
1
5
6
7
2 3 4 5
6
7
Wide
Contact point
Lens fitting mark (P18)
∫ Attaching the Lens Hood
To attach the lens hood (flower shape) that came with the interchangeable lens
(H-FS1442A)
Hold the lens hood by placing your fingers as shown
in the figure.
• Do not hold the lens hood in such a way that it will be bent.
1
2
Align the mark A ( ) on the lens hood with the mark on the tip of the lens.
Rotate the lens hood in the direction of the arrow until it clicks and then align
the mark B (
) on the lens hood with the mark on the tip of the lens.
To attach the lens hood that came with the interchangeable lens (H-FS45150)
1 Align the mark A ( ) on the lens hood with the mark on the tip of the lens.
2 Rotate the lens hood in the direction of the arrow until it clicks and then align
the mark B (
) on the lens hood with the mark on the tip of the lens.
12
SQT1122 (ENG)
DMC-GX8WC_SG-SQT1122_eng.book 13 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Preparation/Basic
Temporarily Storing the Lens Hood
1 Turn the lens hood in the direction of the arrow to detach it.
2 Align the mark C ( ) on the lens hood with the mark on the tip of the lens.
3 Turn the lens hood in the direction of the arrow until it clicks into place.
∫ Attaching the Leather Body Case
Place the camera with its lens portion facing forward, and tighten the screw on the bottom.
• To take out the camera from the Leather Body Case, after loosening the screw on the bottom,
pull out the camera while holding it firmly and taking care not to drop it.
Notes on the use of the Leather Body Case and Shoulder Strap
• When attaching a monopod or tripod, do not hold the camera and overtighten the
monopod or tripod screw.
– When you use a monopod or tripod with a ball head mount (a type that requires you to rotate
the whole tripod head when attaching the camera), we recommend that you take out the
camera from the Leather Body Case before attaching it to the monopod or tripod.
• The NFC function is not available when the Leather Body Case is attached.
• The Leather Body Case is designed to give protection while carrying around, and it does not
guarantee protection from damage caused by dropping it or impact.
• When storing the camera for a long period of time, take it out from the Leather Body Case.
• The Leather Body Case and Shoulder Strap are not waterproof.
Be careful not to wet them in adverse conditions such as rain.
• Do not leave the Leather Body Case and Shoulder Strap in a car exposed to direct sunlight or
in a hot and humid location, such as a bathroom.
• If the Leather Body Case or Shoulder Strap gets wet, after wiping the moisture off the wet
portion with a dry cloth (hand towel, etc.) and stretching the case or strap back to its proper
shape, let it dry thoroughly in the shade.
• To clean the Leather Body Case and Shoulder Strap, wipe them with a dry soft cloth.
– When the camera is soiled badly, it can be cleaned by wiping the dirt off with a wrung wet
cloth, and then with a dry cloth.
– Do not use solvents such as benzine, thinner, alcohol or dishwashing liquid, as these may
damage the the Leather Body Case and Shoulder Strap.
– When using a chemical cloth, be sure to follow the accompanying instructions.
• Store the Leather Body Case and Shoulder Strap in a cool, dry, and well-ventilated location free
of dust and chemicals.
• Since leather is used in the Leather Body Case and Shoulder Strap, discolouration and
fading may occur.
(ENG) SQT1122
13
DMC-GX8WC_SG-SQT1122_eng.book 14 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Preparation/Basic
∫ Removing the Hot Shoe Cover
The camera comes with a hot shoe cover attached to the hot shoe.
Remove the hot shoe cover by pulling it in the direction
indicated by arrow 2 while pressing it in the direction
indicated by arrow 1.
• When the hot shoe is not in use, make sure to attach the hot
shoe cover.
• Please be careful not to lose the hot shoe cover.
Preparation
• Check that the camera is turned off.
Attaching the Shoulder Strap
• We recommend attaching the shoulder strap when using the camera to prevent it from dropping.
• Perform steps 1 to 8 and then attach the other side of the shoulder strap.
• Use the shoulder strap around your shoulder.
– Do not wrap the strap around your neck.
– It may result in injury or accident.
• Do not leave the shoulder strap where an infant can reach it.
– It may result in an accident by mistakenly wrapping around the neck.
14
SQT1122 (ENG)
DMC-GX8WC_SG-SQT1122_eng.book 15 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Preparation/Basic
Charging the Battery
The battery that can be used with this unit is DMW-BLC12E or DMW-BLC12.
1
2
Attach the battery paying attention to the direction of the battery.
Connect the AC cable.
• The [CHARGE] indicator A lights up and charging begins.
∫ About the [CHARGE] indicator
On:
Charging.
Off:
Charging has completed.
(Disconnect the charger from the electrical socket and detach the
battery after charging is completed.)
• When the [CHARGE] indicator flashes
– The battery temperature is too high or too low. It is recommended to charge the battery again
in an ambient temperature of between 10 oC and 30 oC.
– The terminals of the charger or the battery are dirty. In this case, wipe them with a dry cloth.
∫ Charging time
Charging time
Approx. 140 min
• The indicated charging time is for when the battery has been discharged completely.
The charging time may vary depending on how the battery has been used.
The charging time for the battery in hot/cold environments or a battery that has not been
used for a long time may be longer than normal.
(ENG) SQT1122
15
DMC-GX8WC_SG-SQT1122_eng.book 16 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Preparation/Basic
Inserting/Removing the Battery
• Always use genuine Panasonic batteries (DMW-BLC12E or DMW-BLC12).
• If you use other batteries, we cannot guarantee the quality of this product.
• Being careful about the battery orientation, insert all the way until you hear a locking sound and
then check that it is locked by lever A.
Pull the lever A in the direction of the arrow to remove the battery.
Inserting/Removing the Card (Optional)
• Push it securely all the way until you hear a “click” while being careful about the direction in
which you insert it.
To remove the card, push the card until it clicks, then pull the card out upright.
∫ About cards that can be used with this unit
SD Memory Card
(512 MB to 2 GB)
SDHC Memory Card
(4 GB to 32 GB)
SDXC Memory Card
(48 GB to 128 GB)
16
SQT1122 (ENG)
• SDHC Memory Cards and SDXC Memory Cards can be
used only with their compatible devices.
• Check that the PC and other equipment are compatible when
using the SDXC Memory Cards.
http://panasonic.net/avc/sdcard/information/SDXC.html
• This unit is compatible with UHS-I UHS Speed Class 3
standard SDHC/SDXC memory cards.
• Operation of the cards on the left has been confirmed with
Panasonic’s cards.
DMC-GX8WC_SG-SQT1122_eng.book 17 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Preparation/Basic
∫ About motion picture/4K photo recording and speed class ratings
According to the [Rec Format] (P39) and [Rec Quality] (P39) of a motion picture, the
required card differs. To record 4K photos, you need a card with a speed class rating that
supports 4K photo recording. Use a card that meets the following ratings of the SD Speed
Class or UHS Speed Class.
• SD Speed Class and UHS Speed Class are the speed standards regarding continuous writing.
To check the class, see the labelled side, etc. of the card.
[Rec Format]
[AVCHD]
[Rec Quality]
All
[MP4]
FHD/HD/VGA
[MP4]
4K
When recording 4K photos
Speed class
Label example
Class 4 or higher
UHS Speed Class 3
UHS Speed Class 3
• Please confirm the latest information on the following website.
http://panasonic.jp/support/global/cs/dsc/
(This Site is English only.)
• Keep the Memory Card out of reach of children to prevent swallowing.
Formatting the card (initialisation)
Format the card before recording a picture with this unit.
Since data cannot be recovered after formatting, make sure to back up necessary
data in advance.
Select the menu. (P25)
MENU
>
[Setup] > [Format]
• Confirmation screen is displayed. It is executed when [Yes] is selected.
(ENG) SQT1122
17
DMC-GX8WC_SG-SQT1122_eng.book 18 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Preparation/Basic
Attaching/Removing the Lens
• Change lenses where there is not a lot of dirt or dust.
• Do not press the lens release button A when you attach a lens.
∫ Detaching the lens
1
2
Attach the lens cap.
While pressing on the lens release button B, rotate
the lens toward the arrow until it stops and then
remove.
Opening the Monitor
At the time when this camera is purchased, the monitor is stowed in the camera body.
Bring out the monitor as shown below.
1 Open the monitor. (Maximum 180o)
2 It can be rotated 180o forward.
3 Return the monitor to its original position.
• Only rotate the monitor after opening it wide enough, and be careful not to use
excessive force as it may be damaged.
• When not using the monitor it is recommended that you close it with the screen facing inward to
prevent dirt and scratches.
18
SQT1122 (ENG)
DMC-GX8WC_SG-SQT1122_eng.book 19 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Preparation/Basic
Setting Date/Time (Clock Set)
• The clock is not set when the camera is shipped.
1
Turn the camera on.
• When the camera is turned on, the status indicator 1
2
3
Press [MENU/SET].
Press 3/4 to select the language, and press [MENU/
SET].
Press [MENU/SET].
Press 2/1 to select the items (year, month, day, hour,
minute), and press 3/4 to set.
4
5
6
7
8
9
lights up green.
Press [MENU/SET] to set.
When [The clock setting has been completed.] is displayed, press [MENU/SET].
When [Please set the home area] is displayed, press [MENU/SET].
Press 2/1 to select the home area, and then press
[MENU/SET].
(ENG) SQT1122
19
DMC-GX8WC_SG-SQT1122_eng.book 20 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Preparation/Basic
Basic Operations
Using the Viewfinder
Adjusting the angle of the viewfinder
You can record images from a variety of angles by adjusting the angle of the viewfinder.
Taking pictures at a low angle
• Be careful not to catch your finger, etc. in the viewfinder.
• When adjusting the angle of the viewfinder, be careful not to apply too much force, as
this may cause malfunction.
• Return the viewfinder to its original position completely when the camera is not in use.
• When the viewfinder surface becomes dirty, remove the Eyecup, blow away the dust with a
blower (commercially available), and wipe the surface lightly with a dry, soft cloth.
• Use of an external flash (optional) will limit the maximum angle to which the viewfinder can be
adjusted.
Diopter adjustment
Adjust the diopter to suit your vision so that
you can see the characters displayed in the
viewfinder clearly.
20
SQT1122 (ENG)
DMC-GX8WC_SG-SQT1122_eng.book 21 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Preparation/Basic
Shutter button (Taking pictures)
The shutter button works in two steps. To take a picture, press it.
Press the shutter button halfway to focus.
A Aperture value
B Shutter speed
C Focus indication
• Aperture value and shutter speed are displayed.
C
(It will flash in red if the correct exposure is not achieved, except
when set to flash.)
• Once the subject is in focus, the focus indication is displayed.
(When the subject is not in focus, the indication flashes.)
3.5 60
AB
Press the shutter button fully (push it in further),
and take the picture.
• When the image is correctly focused, the picture will be taken, since the [Focus/Release
Priority] is set initially to [FOCUS].
• The focus range is different depending on the lens used.
• Even during menu operation or image playback, if you press the shutter button halfway, you
can instantly set the camera ready for recording.
Motion picture button (Recording motion pictures)
Press the motion picture button to start and stop recording a motion picture.
Start recording by pressing the motion picture
button.
• Release the motion picture button right after you press it.
Stop the recording by pressing the motion picture
button again.
(ENG) SQT1122
21
DMC-GX8WC_SG-SQT1122_eng.book 22 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Preparation/Basic
Mode dial (Selecting a Recording Mode)
Select the mode by rotating the mode dial.
• Rotate the mode dial slowly to select the desired mode.
Intelligent Auto Mode (P27)
The subjects are recorded using settings automatically selected by the
camera.
Intelligent Auto Plus Mode (P27)
Allows you to adjust the brightness (Exposure) and colour hue when in
Intelligent Auto Mode.
Programme AE Mode
Records at the aperture value and shutter speed set by the camera.
Aperture-Priority AE Mode
The shutter speed is automatically determined by the aperture value you set.
Shutter-Priority AE Mode
The aperture value is automatically determined by the shutter speed you set.
Manual Exposure Mode
The exposure is adjusted by the aperture value and the shutter speed which
are manually adjusted.
Creative Video Mode (P29)
Records motion pictures with a manually set aperture value and shutter
speed.
¢ You cannot take still pictures.
/
/
Custom Mode
Use this mode to take pictures with previously registered settings.
Panorama Shot Mode
This mode allows you to take panorama pictures.
Creative Control Mode
Record while checking the image effect.
Cursor buttons/[MENU/SET] button
Pressing the cursor button:
Selection of items or setting of values etc., is performed.
Pressing [MENU/SET]:
Confirmation of setting contents, etc., is performed.
• These operating instructions expresses the up, down, left, and
right of the cursor button as 3/4/2/1.
22
SQT1122 (ENG)
DMC-GX8WC_SG-SQT1122_eng.book 23 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Preparation/Basic
Front Dial/Rear Dial
Rotating:
Selection of items or setting of values is performed during the various settings.
• These operating instructions describe operations of the front dial/rear dial as follows:
e.g.: When rotating
the front dial to the
left or right
e.g.: When rotating
the rear dial to the
left or right
Allows you to set the aperture, shutter speed, and other settings when in
modes.
Mode dial
/
Front dial
Rear Dial
Programme Shift
Programme Shift
Aperture value
Aperture value
Shutter speed
Shutter speed
Aperture value
Shutter speed
/
/
• In [Dial Set.] in the [Custom] menu, you can change the operation methods of the rear dial and
front dial.
Temporarily changing the items assigned to the front/rear dials ([Dial Operation
Switch])
You can temporarily change the items assigned to the front/rear dials using the function
button to which [Dial Operation Switch] is assigned.
[Dial Operation Switch] is assigned to [Fn13] at the time of purchase. (P26)
• You can set the items to be assigned temporarily to the front/rear dials in [Dial Operation Switch
Setup] in [Dial Set.] in the [Custom] menu.
1
Press [Fn13] A.
• A guide will be displayed showing the items temporarily
2
Rotate the front/rear dials while the guide is
displayed.
• The settings of the items assigned to the dials will change.
Press [MENU/SET] and set.
• You can also complete this step by performing either of the operations below:
– Press the shutter button halfway
– Press [Fn13]
3
assigned to the front/rear dials.
A
• Items that are temporarily assigned to the front/rear dials can be used only while the guide
(step
1 ) or setting screen (step 2 ) is displayed.
(ENG) SQT1122
23
DMC-GX8WC_SG-SQT1122_eng.book 24 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Preparation/Basic
[LVF] button (Switching the Monitor/Viewfinder)
Press [LVF] to switch between the Monitor and Viewfinder.
A [LVF] button
B Eye sensor
Press [LVF].
• The monitor/viewfinder will switch as follows:
Automatic viewfinder/
monitor switching¢
Viewfinder display¢
Monitor display
¢ If [Eye Sensor AF] in the [Custom] menu is set to [ON], the camera automatically adjusts the
focus as the eye sensor is activated.
∫ Notes on automatic viewfinder/monitor switching
Automatic viewfinder/monitor switching enables the eye sensor to switch the display to the
viewfinder automatically when you bring your eye or an object near it.
Touch screen (Touch operations)
Touch screen of this unit is capacitive. Touch the panel directly with your bare finger.
∫ Touch
To touch and release the touch screen.
• When selecting features using the touch screen, be sure
Fn8
Fn9
Fn10
to touch the centre of the desired icon.
Fn11
SNAP
Fn12
∫ Drag
A movement without releasing the touch screen.
This can also be used to move to the next image during
playback, etc.
A
∫ Pinch (enlarge/reduce)
Pinch the touch screen apart (enlarge) or together
(reduce) with two fingers.
24
SQT1122 (ENG)
2.0X
B
DMC-GX8WC_SG-SQT1122_eng.book 25 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Preparation/Basic
Setting menu items
1
2
3
Press [MENU/SET].
Press 3/4 of the cursor button to select
the menu item and press [MENU/SET].
Press 3/4 of the cursor button to select
the setting and press [MENU/SET].
• Depending on the menu item, its setting may not
appear or it may be displayed in a different way.
∫ Switching to other menus
e.g.: Switching to the [Setup] menu from [Rec] menu.
1
2
Press 2.
Press 3/4 to select a menu selector icon, such as
[ ].
• You can also select the menu toggle icons by rotating
3
Press [MENU/SET].
the front dial.
∫ Close the menu
Press [
] or press the shutter button halfway.
(ENG) SQT1122
25
DMC-GX8WC_SG-SQT1122_eng.book 26 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Preparation/Basic
Calling frequently-used menus instantly
(Quick Menu)
By using the Quick Menu, some of the menu settings can be easily found.
• The features that can be adjusted using Quick Menu are determined by the mode or a display
style the camera is in.
1
2
Press [Q.MENU] to display the Quick Menu.
Rotate the front dial to select the menu item.
50p
3.5 60
3
4
4:3
L
0
AFS
AUTO
Rotate the rear dial to select the setting.
Press [Q.MENU] to exit the menu once the setting is complete.
Assigning frequently used functions to the
buttons (function buttons)
You can assign recording functions, etc. to specific buttons and icons.
1
Select the menu. (P25)
2
Press 3/4 to select [Setting in REC mode] or
[Setting in PLAY mode] and then press [MENU/SET].
Press 3/4 to select the function button you want to
assign a function to and then press [MENU/SET].
Press 3/4 to select the function you want to assign
and then press [MENU/SET].
• Some functions cannot be assigned depending on the
MENU
3
4
>
function button.
26
SQT1122 (ENG)
[Custom] > [Fn Button Set]
AWB
DMC-GX8WC_SG-SQT1122_eng.book 27 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Recording
Taking Pictures using the Automatic Function
(Intelligent Auto Mode)
Recording Mode:
In this mode, the camera makes the optimal settings for the subject and scene, so we
recommend it when you wish to leave the settings to the camera and record without
thinking about them.
1
Set the mode dial to [¦].
• The camera will switch to either the most recently used
of Intelligent Auto Mode or Intelligent Auto Plus Mode.
At the time of purchase, the mode is set to Intelligent
Auto Plus Mode. (P27)
2
Align the screen with the subject.
• When the camera identifies the optimum scene, the icon
of the scene concerned is displayed in blue for
2 seconds, after which its colour changes to the usual
red. (Automatic scene detection)
∫ Switching between Intelligent Auto Plus Mode and Intelligent Auto Mode
1 Press [MENU/SET].
2
3
4
Press 2.
Press 3/4 to select the [
] or [
] tab.
Press 1 to select [
] or [
] and then press [MENU/SET].
• If [DISP.] is pressed, the description of the selected mode will be displayed.
Recording night scenes ([iHandheld Night Shot])
When [iHandheld Night Shot] is set to [ON] and [ ] is detected while taking handheld
night shots, pictures of the night scenery will be taken at a high burst speed and composed
into a single picture.
This mode is useful if you want to take stunning night shots with minimal jitter and noise,
without using a tripod.
MENU
>
[Rec] > [iHandheld Night Shot] > [ON]/[OFF]
(ENG) SQT1122
27
DMC-GX8WC_SG-SQT1122_eng.book 28 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Recording
Combining pictures into a single picture with rich gradation ([iHDR])
When [iHDR] is set to [ON] and there is, for example, strong contrast between the
background and the subject, multiple still pictures are recorded with differing exposures
and combined to create a single still picture rich in gradation.
[iHDR] works automatically as needed. When it does, [
] is displayed on the screen.
MENU
>
[Rec] > [iHDR] > [ON]/[OFF]
Taking a picture with a blurred background (Defocus Control)
Recording Mode:
You can easily set the blurriness of the background while checking the screen.
1
2
Press [Fn7] to display the setting screen.
Set the blurriness by rotating the rear dial.
• If you press [MENU/SET], you can return to the recording
screen.
• Pressing [Fn7] on the blurriness setting screen will cancel
the setting.
SS
F
500
250
125
60
30
4.0
5.6
8.0
Recording images by changing the brightness (Exposure) or colour tone
Recording Mode:
This mode enables you to change the brightness (Exposure) and colour tone to your
preferred settings from the ones set by the camera.
∫ Setting brightness (Exposure)
Rotate the exposure compensation dial to select
the brightness (Exposure).
∫ Setting colour
1
2
Press 1 to display the setting screen.
Rotate the rear dial to adjust colour.
• This will adjust the colour of the image from a reddish
colour to a bluish colour.
• Press [MENU/SET] to return to the recording screen.
A
28
SQT1122 (ENG)
B
DMC-GX8WC_SG-SQT1122_eng.book 29 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Recording
Recording motion pictures with manually set
aperture value/shutter speed (Creative Video Mode)
Recording Mode:
It is possible to manually change the aperture and shutter speed and record motion
pictures.
1
2
Set the mode dial to [
].
Select the menu. (P25)
MENU
>
[Motion Picture] > [Exposure Mode]
3
Press 3/4 to select [P], [A], [S] or [M], and then press [MENU/SET].
4
Start recording.
5
• The operation for changing the aperture value or shutter speed is the same as the
operation for setting the mode dial to
,
,
or
.
• Press the motion picture button or the shutter button to start recording a motion picture.
(Still pictures cannot be taken.)
Stop recording.
• Press the motion picture button or the shutter button to stop recording a motion picture.
(ENG) SQT1122
29
DMC-GX8WC_SG-SQT1122_eng.book 30 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Recording
Setting the Picture Quality and Size
Setting the aspect ratio of pictures
Applicable modes:
This allows you to select the aspect ratio of the pictures to suit printing or the playback
method.
MENU
>
[Rec] > [Aspect Ratio]
[4:3]
[Aspect Ratio] of a 4:3 TV
[3:2]
[Aspect Ratio] of a 35 mm film camera
[16:9]
[Aspect Ratio] of a high-definition TV, etc.
[1:1]
Square aspect ratio
• The ends of the recorded pictures may be cut at printing so check before printing.
Setting the number of pixels
Applicable modes:
Set the number of pixels.
The higher the numbers of pixels, the finer the detail of the pictures will appear even when
they are printed onto large sheets.
MENU
>
[Rec] > [Picture Size]
When the aspect ratio is [4:3].
[
[
When the aspect ratio is [3:2].
Settings
Image size
Settings
Image size
[L] (20M)
5184k3888
[L] (17M)
5184k3456
M] (10M)
3712k2784
S] (5M)
2624k1968
When the aspect ratio is [16:9].
Settings
Image size
[
[
M] (9M)
3712k2480
S] (4.5M)
2624k1752
When the aspect ratio is [1:1].
Settings
[L] (14.5M)
5184k2920
[
M] (8M)
3840k2160
[
M] (7.5M)
2784k2784
[
S] (2M)
1920k1080
[
S] (3.5M)
1968k1968
30
SQT1122 (ENG)
[L] (14.5M)
Image size
3888k3888
DMC-GX8WC_SG-SQT1122_eng.book 31 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Recording
Setting the compression rate of pictures ([Quality])
Applicable modes:
Set the compression rate at which the pictures are to be stored.
>
MENU
[Rec] > [Quality]
Settings
File format
[A]
JPEG
[›]
[
]
[
]
[
Description of settings
A JPEG image in which image quality was given priority.
]
RAWiJPEG
RAW
A standard image quality JPEG image.
This is useful for increasing the number of shots without
changing the number of pixels.
You can record a RAW image and a JPEG image ([A] or
[›]) simultaneously.
You can only record RAW images.
[
] images are recorded with a smaller data volume than
[
] or [
].
• RAW images are always recorded in the [4:3] (5184k3888) aspect ratio regardless of the
aspect ratio at the time of recording.
• When you delete an image recorded with [
] or [
], both the RAW and JPEG images
will be deleted simultaneously.
• When you play back an image recorded with [
], grey areas corresponding to the aspect
ratio at the time of recording are displayed.
• You can process RAW images in [RAW Processing] in the [Playback] menu. (P43)
• To process and edit RAW files on a PC, use the software “SILKYPIX Developer Studio” by
Ichikawa Soft Laboratory on the DVD (supplied).
(ENG) SQT1122
31
DMC-GX8WC_SG-SQT1122_eng.book 32 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Recording
Adjusting Focus Manually
Applicable modes:
Use this function when you want to fix the focus or when the distance between the lens
and the subject is determined and you do not want to activate Auto Focus.
When using an interchangeable lens (H-FS1442A/
H-FS45150) with a focus ring
Rotate to A side:
Focuses on nearby subject
Rotate to B side:
Focuses on faraway subject
1
2
3
A
B
Set the focus mode lever to [MF].
Press 2 (
).
Press 3/4/2/1 to adjust the focus position,
and press [MENU/SET].
• The assist screen is displayed, enlarging the area. (MF Assist)
• Pressing [DISP.] resets the focus position back to the centre.
4
Adjust the focus.
B
A Indicator for ¶ (infinity)
B MF Assist (enlarged screen)
C Peaking
D MF Guide
• The in-focus portions will be highlighted. (Peaking)
• You can check whether the point of focus is to the near
side or to the far side. (MF Guide)
C
+
AF
A
D
You can perform the following operations:
Button operation Touch operation
3/4/2/1
Dragging
Pinching out/in
Enlarges/reduces the screen in small steps.
s
Enlarges/reduces the screen in large steps.
Switches the enlarged display (windowed/full
screen)
s
[DISP.]
5
32
Description of operation
Moves the enlarged area
[Reset]
Resets the area to be enlarged back to the
centre.
Press the shutter button halfway.
• The assist screen will close. The recording screen will be displayed.
• You can also close the assist screen by pressing [MENU/SET].
SQT1122 (ENG)
DMC-GX8WC_SG-SQT1122_eng.book 33 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Recording
Select a Drive Mode
Applicable modes:
You can change what the camera will do when you press the shutter button.
1
2
Press 4 (
).
Press 2/1 to select the drive mode, and then
press [MENU/SET].
1 2 3 4 5
H
31/3
A Drive mode
A
1 [Single]
When the shutter button is pressed, only one picture is
recorded.
2 [Burst]
Recordings are made in succession while the shutter
button is pressed.
3 [4K PHOTO] (P34)
When the shutter button is pressed, a 4K photo is
recorded.
4 [Auto Bracket]
Each time the shutter button is pressed, recordings
are made with different exposure settings according to
the Exposure Compensation range.
5 [Self Timer]
When the shutter button is pressed, recording takes
place after the set time has elapsed.
∫ To cancel Burst/4K PHOTO/Auto Bracket/Self Timer
Select [
] ([Single]) or [
] from among the drive modes.
(ENG) SQT1122
33
DMC-GX8WC_SG-SQT1122_eng.book 34 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Recording
Recording 4K Photos
Applicable modes:
Press the shutter button to record a 4K photo. You can select the desired moment from a
burst of pictures taken at 30 frames/second and save that moment as a picture of 8 million
pixels (approx.).
1 Record a 4K photo.
2 Select and save pictures. 3 The picture is complete.
• Use a UHS Speed Class 3 card to record 4K photos. (P17)
• When recording 4K photos, the angle of view is narrower.
1
2
3
Press 4 (
).
Press 2/1 to select 4K Photo icon ([
etc.), and then press 3.
H
],
31/3
Select the recording method with 2/1, and then press [MENU/SET].
• Settings will be optimised for 4K photo recording. The recording method is set to [
([4K Burst]) by default.
For capturing the best shot of a
fast-moving subject
[
]
[4K Burst]¢1,2
[
]
Burst recording is performed while the
shutter button is pressed and held.
SQT1122 (ENG)

A Press and hold
B Recording is performed
• Press the button fully slightly in advance. Recording starts
approximately 0.5 seconds after it has been pressed fully.
For capturing unpredictable photo
opportunities
Burst recording starts when the
shutter button is pressed and stops
when pressed again.
[4K Burst(S/S)]¢1,2
“S/S” is an
abbreviation of
C Start (First)
“Start/Stop”.
D Stop (Second)
E Recording is performed
34




]
DMC-GX8WC_SG-SQT1122_eng.book 35 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Recording
[
]
[4K Pre-Burst]
For recording as needed whenever
a photo opportunity arises
Burst recording is performed for
approximately 1 second before and
after the moment that the shutter
button is pressed.



F Approximately 1 second
G Recording is performed
When the drive mode is set to [
] ([4K Pre-Burst]), the battery
drains faster and the camera temperature rises. Select [
]
([4K Pre-Burst]) only when recording.
¢1 When the ambient temperature is high or continuous recording is performed, the
camera may display [
] and stop the recording to protect itself. Wait until the
camera cools down.
¢2 Recording will continue without interruption even when the file size exceeds 4 GB, but
the file will be divided and saved/played back separately.
4
Press the shutter button to perform recording.
• After the 4K burst photo recording, a 4K burst file will be saved.
4:3
4K
AFS
4K burst files are saved as motion pictures in MP4 format.
• When [Auto Review] is enabled, the picture selection screen
will be displayed automatically.
Selecting pictures from 4K burst file and saving
• The picture will be saved in JPEG format.
• The picture will be saved with recording information (Exif information), including its shutter
speed, aperture and ISO sensitivity information.
Setting [Playback Mode] in the [Playback] menu to [4K PHOTO] enables you to play
back only 4K burst files and pictures created from them.
• For details, refer to the “Operating Instructions for advanced features (PDF format)”.
(ENG) SQT1122
35
DMC-GX8WC_SG-SQT1122_eng.book 36 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Recording
Image Stabiliser
The camera can activate either the In-Lens Image Stabiliser or In-Body Image Stabiliser, or
it can activate both of them and reduce jitter even more effectively. (Dual I.S.)
For motion picture recording, the 5-Axis Hybrid Image Stabiliser is available. It uses both
the optical stabiliser of the lens and the electronic stabiliser of the camera’s sensor.
• The image stabilisers to be activated differ depending on your lens. The icon for the currently
activated image stabiliser is displayed on the recording screen.
When taking pictures
Panasonic lenses compatible with Dual I.S.
(Based on the Micro Four Thirds System
standard)
• For the latest information on compatible
Lens + Body
lenses, please refer to our website.
(Dual I.S.) (
• If [
] or [
] is not displayed even when a
compatible lens is used, update the lens
firmware to the latest version. (P8)
Lenses compatible with the image
stabiliser function
(Based on the Micro Four Thirds System
standard/Four Thirds System standard)
When recording
motion pictures
Lens (
/
)
)
5-Axis Hybrid
(
)¢
Lens (
Lenses not compatible with the image
stabiliser function
(Based on the Micro Four Thirds System
standard/Four Thirds System standard)
When using a Leica lens mount adaptor
(optional) or mount adaptor made by
another manufacturer
• Set [Shoot w/o Lens] to [ON].
Lens (
/
)
Body (
/
)
)
5-Axis Hybrid
(
)¢
—
(
)
¢ When [E-Stabilization (Video)] is set to [ON]
Applicable modes:
• When using an interchangeable lens with O.I.S. switch, stabiliser function is activated if the
O.I.S. switch of the lens is set to [ON]. ([
1
Select the menu. (P25)
MENU
36
] is set at the time of purchase)
>
SQT1122 (ENG)
[Rec] > [Stabilizer]
DMC-GX8WC_SG-SQT1122_eng.book 37 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Recording
2
Press 3/4 to select the item and then press [MENU/SET].
[
]
([Normal])
[Operation
Mode]
Vertical and horizontal shake are compensated for.
Camera shake is corrected for up/down movements.
[
]
This mode is ideal for panning (a method of taking pictures
([Panning]) which involves turning the camera to track the movements of a
subject which continues to move in a fixed direction).
[OFF]
[Stabilizer] does not work.
• When using a lens with an O.I.S. switch, set the switch to
[OFF].
Jitter during motion picture recording is corrected along the vertical,
horizontal, roll, pitch, and yaw axes (5-Axis Hybrid Image Stabiliser).
[E-Stabilizat
[ON]/[OFF]
ion (Video)]
• When [ON] is selected, the angle of view of recorded motion pictures may
become narrower.
If your lens is compatible with the In-Body Image Stabiliser and the focal
length is not set automatically, you can set it manually.
[Focal
• When a manually selected focal length is set, a confirmation screen asking
Length Set]
you to change the focal length setting is displayed after you turn on the
camera. Selecting [Yes] allows you to set [Focal Length Set] in [Stabilizer].
• Exit the menu after it is set.
Setting the focal length of a lens
1
Select the menu. (P25)
MENU
2
3
>
[Rec] > [Stabilizer] > [Focal Length Set]
Select the focal length of your lens with 2/1.
• A focal length ranging from 8 mm to 1000 mm can be set.
• Set a focal length written on the body of your lens, etc.
Press [MENU/SET].
(ENG) SQT1122
37
DMC-GX8WC_SG-SQT1122_eng.book 38 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Recording
Recording Motion Picture
Applicable modes:
This camera can record full high definition motion pictures compatible with the AVCHD
format or motion pictures recorded in MP4.
In addition, the camera can record 4K motion pictures in MP4. (P40)
Audio will be recorded in stereo.
1
Start recording by pressing the motion
picture button.
A Elapsed recording time
B Available recording time
• Recording of motion picture appropriate for each mode is
2
Stop the recording by pressing the motion picture button again.
• Still picture recording is also possible during the motion picture recording by fully
pressing the shutter button.
38
A
possible.
• The recording state indicator (red) C will flash while
recording motion pictures.
3s
• If no operation is performed, part of the information on
the screen will gradually become darker after
approximately 10 seconds has passed, and will no
longer be displayed after approximately 1 minute has
passed.
Pressing the [DISP.] button or touching the monitor will
make the display reappear.
This operation is to prevent screen burn-in and is not a malfunction.
• Release the motion picture button right after you press it.
SQT1122 (ENG)
C
R1m37s
B
DMC-GX8WC_SG-SQT1122_eng.book 39 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Recording
• When the ambient temperature is high or motion picture is recorded continuously, the camera
may display [
] and stop the recording to protect itself. Wait until the camera cools down.
• It is recommended to use a fully charged battery or AC adaptor (DMW-AC10: optional) when
recording motion pictures.
• If while recording motion pictures using the AC adaptor (DMW-AC10: optional) the power
supply is cut off due to a power cut or if the AC adaptor (DMW-AC10: optional) is disconnected
etc., the motion picture will not be recorded.
• These times are for an ambient temperature of 23 oC and a humidity of 50%RH.
Please be aware that these times are approximate.
• Actual recordable time is the time available for recording when repeating actions such as
turning this unit on and off, starting/stopping recording, etc.
• MP4 motion pictures with a [Rec Quality] size of [FHD], [HD] or [VGA]:
Recording stops when the continuous recording time exceeds 29 minutes and 59 seconds or
the file size exceeds 4 GB.
– Since the file size becomes larger with [FHD], recording with [FHD] will stop before
29 minutes 59 seconds.
• MP4 motion pictures with a [Rec Quality] size of [4K]:
You can continue recording without interruption even if the file size exceeds 4 GB, but the
motion picture file will be divided and recorded/played back separately.
∫ Setting the format, size and recording frame rate
MENU
>
[AVCHD]
[MP4]
MENU
>
[Motion Picture] > [Rec Format]
This data format is suitable for when playing back on a high-definition TV, etc.
This data format is suitable for when playing back on a PC, etc.
[Motion Picture] > [Rec Quality]
When [AVCHD] is selected
Item
Size
Recording frame
rate
Sensor output
Bit rate
[FHD/28M/50p]¢
1920k1080
50p
50 frames/second
28 Mbps
[FHD/17M/50i]
1920k1080
50i
50 frames/second
17 Mbps
[FHD/24M/25p]
1920k1080
50i
25 frames/second
24 Mbps
[FHD/24M/24p]
1920k1080
24p
24 frames/second
24 Mbps
¢ AVCHD Progressive
(ENG) SQT1122
39
DMC-GX8WC_SG-SQT1122_eng.book 40 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Recording
When [MP4] is selected
Item
Size
Recording frame
rate
Sensor output
Bit rate
[4K/100M/25p]
3840k2160
25p
25 frames/second
100 Mbps
[4K/100M/24p]
3840k2160
24p
24 frames/second
100 Mbps
[FHD/28M/50p]
1920k1080
50p
50 frames/second
28 Mbps
[FHD/20M/25p]
1920k1080
[HD/10M/25p]
1280k720
[VGA/4M/25p]
640k480
20 Mbps
25p
25 frames/second
10 Mbps
4 Mbps
Recording motion pictures in 4K
Applicable modes:
You can create finely-detailed motion pictures in 4K by recording motion pictures with their
size set to [4K] in [Rec Quality].
• When recording motion pictures in 4K, use a card rated as UHS Speed Class 3. (P17)
• The angle of view of motion pictures in 4K is narrower than those of motion pictures in other
sizes.
To record motion pictures in 4K:
1 Set [Rec Format] in the [Motion Picture] menu to [MP4]. (P39)
2 Set [Rec Quality] in the [Motion Picture] menu to [4K/100M/25p] or [4K/100M/24p].
(P39)
3 Start recording by pressing the motion picture button.
4 Stop the recording by pressing the motion picture button again.
40
SQT1122 (ENG)
DMC-GX8WC_SG-SQT1122_eng.book 41 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Playback
Playing Back Pictures
1
2
Press [(].
Press 2/1.
2:
Play back the previous picture
1:
Play back the next picture
Sending an image to a web service
If you press 4 when displaying images one by one, you can easily send an image to a
web service.
• For details, refer to the “Operating Instructions for advanced features (PDF format)”.
Playing Back Motion Pictures
This unit was designed to play motion pictures using the AVCHD and MP4 formats.
• Motion pictures are displayed with the motion picture icon
([
]).
Press 3 to play back.
A
12s
A Motion picture recording time
∫ Operations during Motion Picture Playback
Button
Touch
operation operation
3
Description of
operation
Play/Pause
Button
Touch
operation operation
4
Fast rewind¢1
2
Frame-by-frame
rewind
(while pausing)¢2
Reduce volume level
Description of
operation
Stop
Fast forward¢1
1
Frame-by-frame
forward
(while pausing)
Increase volume
level
¢ 1 The fast forward/rewind speed increases if you press 1/2 again.
¢ 2 When a motion picture recorded with [AVCHD] is rewound frame-by-frame, its frames will
be shown in intervals of approximately 0.5 seconds.
• If you press [MENU/SET] during a pause, you can create a picture from a motion picture.
(ENG) SQT1122
41
DMC-GX8WC_SG-SQT1122_eng.book 42 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Playback
Deleting Pictures
Once deleted, pictures cannot be recovered.
To delete a single picture
1
In Playback Mode, select the picture to
delete and then press [ ].
• The same operation can be performed by touching
[
2
].
Press 3 to select [Delete Single] and then
press [MENU/SET].
'HOHWH6LQJOH
• Confirmation screen is displayed.
'HOHWH0XOWL
Picture is deleted by selecting [Yes].
'HOHWH$OO
To delete multiple pictures (up to 100¢) or all the pictures
¢ Picture groups are treated as a single picture.
(All the pictures in the selected picture group will be deleted.)
1
2
In Playback Mode, press [
].
Press 3/4 to select [Delete Multi] or [Delete All] and then press
[MENU/SET].
• [Delete All] > Confirmation screen is displayed.
Pictures are deleted by selecting [Yes].
• It is possible to delete all pictures except the ones set as favourite when [All Delete
Except Favorite] is selected with the [Delete All] set.
3
(When [Delete Multi] is selected)
Press 3/4/2/1 to select the picture, and
then press [MENU/SET] to set. (Repeat this
step.)
2.
• [‚] appears on the selected pictures.
If [MENU/SET] is pressed again, the setting is
cancelled.
4
(When [Delete Multi] is selected)
Press 2 to select [OK], and then press [MENU/SET] to execute.
• Confirmation screen is displayed.
Pictures are deleted by selecting [Yes].
42
SQT1122 (ENG)
DMC-GX8WC_SG-SQT1122_eng.book 43 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Playback
Using the [Playback] Menu
[RAW Processing]
You can process the pictures taken in RAW format. The processed pictures will be saved
in JPEG format. You can check how effects are applied to each picture while processing it.
1 Select the menu. (P25)
MENU
2
3
4
5
6
>
[Playback] > [RAW Processing]
Select RAW images with 2/1, and then press [MENU/
SET].
Press 3/4 to select an item.
[White Balance]
[Highlight]
[i.Resolution]
[Exposure Comp.]
[Shadow]
[Sharpness]
[Photo Style]
[Saturation]/[Color Tone]
[Setup]
[i.Dynamic]
[Filter Effect]
[Contrast]
[Noise Reduction]
Press [MENU/SET] and set.
• The setting method differs according to the item.
Press [MENU/SET].
• This operation returns you to the screen in step 3. To set other items, repeat steps 3
through 5.
Select [Begin Processing] with 3/4, and then press [MENU/SET].
• Confirmation screen is displayed. It is executed when [Yes] is selected.
Exit the menu after it is executed.
(ENG) SQT1122
43
DMC-GX8WC_SG-SQT1122_eng.book 44 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Playback
∫ How to set each item
When you select an item, the setting screen will be displayed.
Button
operation
2/1
/
Touch
operation
Description of operation
Dragging Selects a setting.
3
[WB K
Set]
4
[Adjust.]
[DISP.]
[DISP.]
[MENU/SET]
[Set]
DISP.
Displays the screen that lets you
set the colour temperature. (only
when [White Balance] is set to
[
])
Displays the screen that lets you
fine-adjust the White Balance.
(only when [White Balance] is set)
-1
0
+1
DISP.
WB
AWB
AWB
Displays the comparison screen.
Sets the adjusted level and returns
you to the item selection screen.
• When [Noise Reduction], [i.Resolution] or [Sharpness] is
selected, the comparison screen cannot be displayed.
• If you touch the picture twice, the picture will be enlarged. If you touch the picture twice when it
is enlarged, it will be reduced to the original size.
On the comparison screen, you can use the following operations to make adjustments:
A Current setting
Button
operation
Touch
operation
2/1
/
Dragging
[DISP.]
[DISP.]
Returns you to the setting screen.
[MENU/SET]
[Set]
Sets the adjusted level and returns
you to the item selection screen.
Description of operation
0
Selects a setting.
• If you touch the picture at the centre, it will be enlarged. If you touch [
DISP.
A
], the picture will be
reduced to the original size.
[Setup] setting
When you select an item, the screen that asks you to select [Reinstate Adjustments],
[Color Space], or [Picture Size] will be displayed.
1 Press 3/4 to select an item, and press [MENU/SET].
• If you select [Reinstate Adjustments], a confirmation screen will be displayed. Selecting
[Yes] will execute the operation and return you to the item selection screen.
2 Press 3/4 to select a setting, and press [MENU/SET].
44
SQT1122 (ENG)
DMC-GX8WC_SG-SQT1122_eng.book 45 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Wi-Fi/NFC
What you can do with the Wi-FiR function
• The camera cannot be used to connect to a public wireless LAN connection.
Controlling with a Smartphone/Tablet (P45)
• Recording with a smartphone (P48)
• Playing back pictures in the camera (P48)
• Saving images stored in the camera (P49)
• Sending images to an SNS (P49)
• Writing location information on images stored in the camera (P50)
• Combining motion pictures recorded with Snap Movie according to your preference on a
smartphone (P50)
Displaying pictures on a TV
Printing Wirelessly
When sending images to AV device
When sending images to PC
Using Web services
These operating instructions refer to both smartphones and tablets as “smartphones” from
this point on unless noted otherwise.
• For details, refer to the “Operating Instructions for advanced features (PDF format)”.
∫ About the [Wi-Fi] button
In these operating instructions, a function button to which
[Wi-Fi] is assigned is referred to as the [Wi-Fi] button. (At the
time of purchase, [Wi-Fi] is assigned to [Fn8].)
• Refer to P26 for details about the function button.
Fn8
Fn9
Fn10
Fn11
SNAP
Steps for pressing [Wi-Fi]
1
2
Fn12
Touch [ ].
Touch [
Fn8
].
Controlling with a Smartphone/Tablet
Installing the smartphone/tablet app “Image App”
The “Image App” is an application provided by Panasonic.
• OS
App for AndroidTM:
Android 4.0 or higher
App for iOS:
iOS 6.0 or higher
(Please note that the iPhone 3GS is not supported.)
(ENG) SQT1122
45
DMC-GX8WC_SG-SQT1122_eng.book 46 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Wi-Fi/NFC
1
2
3
4
Connect the smartphone to a network.
(Android)
Select “Google PlayTM Store”.
(iOS)
Select “App StoreSM”.
Enter “Panasonic Image App” or “LUMIX” into the search box.
Select “Panasonic Image App”
and install it.
• Use the latest version.
• Supported OSs are current as of July 2015 and are subject to change.
• Read the [Help] in the “Image App” menu for further details on how to operate.
• When you operate the “Image App” on the smartphone that is connected to the camera via Wi-Fi,
[Help] in the “Image App” may not be displayed depending on the smartphone. In this case, after
terminating the connection to the camera, reconnect the smartphone to a mobile phone network
such as the 3G or LTE network or to a Wi-Fi router, and then display [Help] in the “Image App”.
• Some of the screens and information provided in these operating instructions may differ from
your device depending on the supported OS and “Image App” version.
• The service may not be able to be used properly depending on the type of smartphone being used.
For information on the “Image App”, refer to the support site below.
http://panasonic.jp/support/global/cs/dsc/
(This Site is English only.)
• When downloading the app on a mobile network, high packet communication fees may be
incurred depending on the details of your contract.
Connecting to a smartphone/tablet
For both iOS devices (iPhone/iPod touch/iPad) and Android devices
Connecting without using the password
You can easily set up a direct connection to your smartphone without entering a password.
1
Select the menu on the camera. (P25)
MENU >
[Setup] > [Wi-Fi] > [Wi-Fi
Function] > [New Connection] > [Remote
Shooting & View]
• When the camera is ready to be connected to the
2
3
4
5
46
smartphone, the SSID is displayed.
A SSID
• You can also display the information by pressing [Wi-Fi] on
the camera.
Turn on the Wi-Fi function in the setting menu of the smartphone.
On the Wi-Fi setting screen of the smartphone, select the
SSID displayed on the camera.
On the smartphone, start “Image App”.
When the connection confirmation screen is displayed on the
camera, select [Yes] to connect. (For first time connection only)
SQT1122 (ENG)
A
Wi-Fi
0123456789ABC
DMC-GX8WC_SG-SQT1122_eng.book 47 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Wi-Fi/NFC
• When [Wi-Fi Password] is set to the default setting [OFF], third parties may intercept
Wi-Fi radio waves and collect the content of communications. Set [Wi-Fi Password] to
[ON] to enable the password.
• For details, refer to the “Operating Instructions for advanced features (PDF format)”.
When using an Android device
Setting up a connection using the NFC function
∫ Compatible models
This function can be used with the NFC compatible device with Android. (excluding
some models)
• For information on the operation and settings of NFC-compatible smartphones, refer to the
operating instructions of your device.
• If [
] is not displayed on the smartphone, the NFC function of the smartphone is disabled.
Read the operating instructions of your smartphone and enable it.
1
2
3
4
On the smartphone, start “Image App”.
• If a message appears stating that a camera search is in progress, close the message.
While [ ] is displayed on the screen of
the smartphone, touch the smartphone to
[ ] of the camera.
When the connection confirmation screen
is displayed on the camera, select [Yes].
Touch the smartphone to [ ] of the
camera again.
• Steps 3 through 4 are not required from the
second time on.
(ENG) SQT1122
47
DMC-GX8WC_SG-SQT1122_eng.book 48 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Wi-Fi/NFC
For both iOS devices (iPhone/iPod touch/iPad) and Android devices
Terminating the connection
After use, terminate the connection to the smartphone.
1 Select the camera’s menu items to terminate the Wi-Fi connection.
MENU
>
[Setup] > [Wi-Fi] > [Wi-Fi Function]
• Confirmation screen is displayed. It is ended when [Yes] is selected.
• You can also terminate the connection by pressing [Wi-Fi] on the camera.
On the smartphone, close “Image App”.
2
(If you are using an iOS device)
On the screen of “Image App”, press the home button to close the app.
(If you are using an Android device)
On the screen of “Image App”, press the return button twice to close the app.
Taking images via a smartphone/tablet (remote recording)
1
2
Connect to a smartphone. (P46)
Operate the smartphone.
1 Select [
].
2 Record an image.
• The recorded images are saved in the camera.
• Some settings are not available.
A


Playing back images in the camera
1
2
Connect to a smartphone. (P46)
Operate the smartphone.
1 Select [
].
2 Touch the image to enlarge it.
• When you play a motion picture, the camera transmits it to the “Image App” at a reduced data
size. As a result, its image quality differs from that of the actual recorded motion picture. In
addition, depending on the smartphone or conditions of use, the image quality may deteriorate
or the sound may skip during motion picture or picture playback.
48
SQT1122 (ENG)
DMC-GX8WC_SG-SQT1122_eng.book 49 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Wi-Fi/NFC
Saving images stored in the camera
1
2
Connect to a smartphone. (P46)
Operate the smartphone.
1 Select [
].
2 Touch and hold an image, and drag it to save it.
• The function can be assigned to the top, bottom, left or right according to your preference.
• Pictures in RAW format, AVCHD motion pictures, MP4 motion pictures with a [Rec Quality] size
of [4K], and 4K burst files cannot be saved.
• 3D pictures (MPO format) will be saved as 2D pictures (JPEG format).
Using the NFC function to easily transfer images on the camera
The NFC function is not available for iOS devices (iPhone/iPod touch/iPad).
1
2
Play back the picture in the camera.
Launch “Image App” on the smartphone.
• If a message appears stating that a camera
3
While [ ] is displayed on the connection
screen of the “Image App ”, touch the
smartphone to [ ] of the camera.
• If a connection attempt by touching fails, restart
search is in progress, close the message.
the “Image App”, and then display the screen
in step 2 again.
• To transfer more than one image, repeat steps
1 and 3.
(They cannot be transferred as a batch.)
Sending images in the camera to an SNS
1
2
Connect to a smartphone. (P46)
Operate the smartphone.
1 Select [
].
2 Touch and hold an image, and drag it to send it to an SNS, etc.
• The image is sent to a web service such as an SNS.
• The function can be assigned to the top, bottom, left or right according to your preference.
(ENG) SQT1122
49
DMC-GX8WC_SG-SQT1122_eng.book 50 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Wi-Fi/NFC
Adding location information to images stored in the camera from a
smartphone/tablet
You can send location information acquired with a smartphone to the camera. After
sending the information, you can also write it on images stored in the camera.
1 Start recording location
information
2 Start recording images
3 Finish recording the location
information
4 Sending and writing location
information


∫ Operate the smartphone
1
2
3
4

GPS

Connect to a smartphone. (P46)
Select [
].
Select [Geotagging].
Select an icon.
Start/stop recording location information.
• The smartphone battery drains faster while location information is being recorded.
When recording of location information is not necessary, stop it.
Sending and writing location information.
• Follow the on-screen messages to operate the smartphone.
• Images with location information are indicated with [
].
Combining motion pictures recorded with Snap Movie according to
your preference on a smartphone/tablet
Using a smartphone, you can combine motion pictures recorded with the camera’s [Snap
Movie] function. Music can be added to motion pictures to be combined. In addition, you
can save the combined motion picture or upload it on a web service.
1
2
Connect to a smartphone. (P46)
Operate the smartphone.
1 Select [
].
2 Select [Snap Movie].
• [Snap Movie] motion pictures with recent recording dates will be selected and
automatically sent to the smartphone.
• When motion pictures with recent recording dates are not available, a screen that lets
you select motion pictures will be displayed. Select motion pictures and send them.
3 Edit the motion pictures.
• Read the [Help] in the “Image App” menu for further details on how to operate.
• [Snap Movie] of the “Image App” requires a smartphone that supports Android OS 4.3 or higher.
• The iPhone 4 and iPod touch (4th generation) do not support [Snap Movie] of the “Image App”.
50
SQT1122 (ENG)
DMC-GX8WC_SG-SQT1122_eng.book 51 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Others
About the supplied software
The supplied DVD includes the following software.
Install the software on to your computer before use.
• PHOTOfunSTUDIO 9.7 PE (Windows Vista/Windows 7/Windows 8/Windows 8.1)
• SILKYPIX Developer Studio 4.3 SE
(Windows Vista/Windows 7/Windows 8/Windows 8.1, Mac OS X v10.6 to v10.10)
For details on how to use the SILKYPIX Developer Studio, refer to the “Help” or the
Ichikawa Soft Laboratory’s support website:
http://www.isl.co.jp/SILKYPIX/english/p/support/
• LoiLoScope 30 day full trial version (Windows Vista/Windows 7/Windows 8/
Windows 8.1)
For more information on how to use LoiLoScope, read the LoiLoScope manual
available for download at the link below.
Manual URL: http://loilo.tv/product/20
∫ Installing supplied software
• Before inserting the DVD, close all running applications.
1
2
Check the environment of your PC.
• For details about information such as the operating environment or operating method,
refer to the “Operating Instructions for advanced features (PDF format)” or the operating
instructions for the respective software programmes.
Insert the DVD with the supplied software.
• If the automatic playback screen is displayed, you can display the menu by selecting and
executing [Launcher.exe].
• In Windows 8/Windows 8.1, you can display the menu by clicking a message that is
displayed after inserting the DVD and then selecting and executing [Launcher.exe].
• You can also display the menu by double-clicking [SFMXXXX] in [Computer] (XXXX
3
4
differs depending on the model).
Click [Applications].
Click on the [Recommended Installation] on the install menu to install.
• Proceed with installation according to messages appearing on the screen.
• The software compatible with your PC will be installed.
• On the Mac, SILKYPIX can be installed manually.
1 Insert the DVD with the supplied software.
2 Double-click the application folder on the DVD.
3 Double-click on the automatically displayed folder.
4 Double-click the icon in the application folder.
Not available in these cases:
• “PHOTOfunSTUDIO” and “LoiLoScope” are not compatible with Mac.
(ENG) SQT1122
51
DMC-GX8WC_SG-SQT1122_eng.book 52 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Others
Monitor Display/Viewfinder Display
• The following images are examples of when the display screen is set to [
] (monitor
style) in the monitor.
In recording
50p

4:3
L
AFS

ラュン

Fn8
Fn9
×
AEL

3.5 60
0 200
BKT
AWB
98

1
C3-1
Custom settings
Photo Style
Œ
WL
50p
ISO
WIDE
EXPS
Image effect (filter) setting
Card (displayed only during
recording)
8m30s
Elapsed recording time¢1 (P38)
Simultaneous recording
indicator
Flash Mode
Automatic viewfinder/monitor
switching (P24)
Flash
Extra Tele Conversion (when
recording motion pictures)
Recording format/Recording
quality (P39)
Image size (Panorama Shot
Mode)
Image effect (filter) adjustment
display
Recording Mode (P22)
EXPS
50p
Fn11
Fn12
STD.
‰
SS
SNAP

P
F
MINI
Fn10
Peaking
Highlight Shadow
ラュン
HDR/iHDR (P28)
SNAP
4SEC
Snap Movie
Multi exposure
4:3
L
Picture size/Aspect Ratio (P30)
Digital Zoom
M
Extra Tele Conversion (when
taking still pictures)
Electronic shutter
4:3
EX
Picture Mode (Photo Priority)
Overheat indicator (P58, 59)
52
SQT1122 (ENG)
DMC-GX8WC_SG-SQT1122_eng.book 53 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Others
4
2
A›
Quality (P31)
AF area
AFS AFF AFC MF
š
Ø
Focus Mode
Spot metering target
AFL
Centre marker display
AF Mode
Self-timer¢4
Pull Focus
Mic level display
Face Recognition
Silent Mode
AF Lock
External Microphone
Burst
AEL
4K Photo (P34)
AE Lock
AE
Auto Bracket
Metering Mode
Programme Shift
Self-timer
3.5
Aperture value (P21)
Battery indication
60
Shutter speed (P21)
Exposure compensation value
Image Stabiliser (P36)
Manual Exposure Assistance
Jitter alert
Recording state (Flashes red.)/
Focus (Lights green.) (P21)
LOW
Focus (Under low illumination)
STAR
Focus (Starlight AF)
Connected to Wi-Fi
ISO sensitivity
5
BKT
AWB
VÐîÑ
1
Histogram
3
Name
¢2
Number of days that have passed since the
departure date¢3
White Balance Bracket
White Balance Fine Adjustment
White Balance
Colour (P28)
98
Number of recordable pictures¢5
r20
Maximum number of pictures
that can be taken continuously
R 8m30s
Available recording time¢1, 5
¢2
Age
Location¢3
Current date and time/Travel destination setting¢3:
“
Exposure meter
Focal distance display
Step zoom
(ENG) SQT1122
53
DMC-GX8WC_SG-SQT1122_eng.book 54 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Others
6
Touch tab
Touch zoom
×
Touch Shutter
AE
Touch AE
Peaking
Fn8
Fn9
Fn10 Fn11 Fn12
SNAP
Function button (P26)
Colour (P28)
Defocus control function (P28)
Type of defocus ([Miniature Effect])
One point colour
Position of the light source
/
Image effect (filter) adjustment
/
MINI
Image effect (filter)
F
Aperture value (P21)
SS
Shutter speed (P21)
ISO
ISO sensitivity
Microphone level adjustment
¢1 h: hour, m: minute, s: second
¢2 This is displayed for about 5 seconds when the camera is turned on if the [Profile Setup]
setting is set.
¢3 This is displayed for about 5 seconds when the camera is turned on, after setting the clock
and after switching from Playback Mode to Recording Mode.
¢4 This is displayed during countdown.
¢5 It is possible to switch the display between the number of recordable pictures and available
recording time with the [Remaining Disp.] setting in the [Custom] menu.
54
SQT1122 (ENG)
DMC-GX8WC_SG-SQT1122_eng.book 55 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Others
In recording
On-monitor recording information
3
F 3.5


ISO
AUTO
1/60
Single (P33)
Burst
0
0
0
4:3
AFS
L
4K Photo (P34)
Wi-Fi Fn

98

AWB
1
C1
EXPS
Recording Mode (P22)
Auto Bracket
Self-timer
AFS AFF AFC MF
Focus Mode (P32)
š
Ø
AF Mode
Quality (P31)
A›
4:3
F3.5
Aperture value (P21)
1/60
Shutter speed (P21)
Wi-Fi
Wi-Fi (P45)
Function button setting (P26)
Fn
Battery indication
4
2
ISO
ISO sensitivity
AUTO
Photo Style
Exposure compensation value
0
0
‰
Picture size/Aspect Ratio (P30)
L
Manual Exposure Assistance
ΠFlash Mode
WL
AWB VÐîÑ
1
White Balance
Intelligent Dynamic Range
Control
Flash
AE
Metering Mode
98
Number of recordable pictures
r20
Maximum number of pictures
that can be taken continuously
R 8m30s
Available recording time
(ENG) SQT1122
55
DMC-GX8WC_SG-SQT1122_eng.book 56 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Others
Menu list
To display explanations of the menu items.
A
When [Menu Information] in the [Setup] menu is set to
[ON], explanations of the menu items and settings are
displayed on the menu screen.
A Explanations of the menu
• [Photo Style], [Filter Settings], [AFS/AFF], [Metering Mode], [Highlight Shadow], [i.Dynamic],
[i.Resolution], [Diffraction Compensation] and [Digital Zoom] are common to both the [Rec] menu and
[Motion Picture] menu. Changing these settings in one of these menus is reflected in other menu.
[Rec]
This menu lets you set the aspect ratio, number of pixels, 4K Photo and other aspects of the
pictures you are recording.
[Photo Style]
[i.Resolution]
[ISO Increments]
[Filter Settings]
[iHandheld Night Shot]
[Extended ISO]
[Aspect Ratio]
[iHDR]
[Long Shtr NR]
[Picture Size]
[HDR]
[Shading Comp.]
[Quality]
[Multi Exp.]
[Diffraction Compensation]
[AFS/AFF]
[Time Lapse Shot]
[Ex. Tele Conv.]
[Metering Mode]
[Stop Motion Animation]
[Digital Zoom]
[Burst Rate]
[Panorama Settings]
[Color Space]
[4K PHOTO]
[Electronic Shutter]
[Stabilizer]
[Auto Bracket]
[Shutter Delay]
[Face Recog.]
[Self Timer]
[Flash]
[Profile Setup]
[Highlight Shadow]
[Red-Eye Removal]
[i.Dynamic]
[ISO Limit Set]
[Motion Picture]
This menu lets you set the [Rec Format], [Rec Quality], and other aspects for motion picture
recording.
[Photo Style]
[Metering Mode]
[Silent Operation]
[Filter Settings]
[Highlight Shadow]
[Mic Level Disp.]
[Snap Movie]
[i.Dynamic]
[Mic Level Adj.]
[Rec Format]
[i.Resolution]
[Wind Noise Canceller]
[Rec Quality]
[Diffraction Compensation]
[Exposure Mode]
[Luminance Level]
[AFS/AFF]
[Ex. Tele Conv.]
[Picture Mode]
[Digital Zoom]
[Continuous AF]
[Flkr Decrease]
56
SQT1122 (ENG)
DMC-GX8WC_SG-SQT1122_eng.book 57 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Others
[Custom]
Operation of the unit, such as displaying of the screen and button operations, can be set up
according to your preferences. Also, it is possible to register the modified settings.
[Cust.Set Mem.]
[MF Assist Display]
[Remaining Disp.]
[Silent Mode]
[MF Guide]
[Auto Review]
[AF/AE Lock]
[Peaking]
[Fn Button Set]
[AF/AE Lock Hold]
[Histogram]
[Q.MENU]
[Shutter AF]
[Guide Line]
[Dial Set.]
[Half Press Release]
[Center Marker]
[Video Button]
[Quick AF]
[Highlight]
[Power Zoom Lens]
[Eye Sensor AF]
[Zebra Pattern]
[Eye Sensor]
[Pinpoint AF Time]
[Monochrome Live View]
[Touch Settings]
[Pinpoint AF Display]
[Constant Preview]
[Touch Scroll]
[AF Assist Lamp]
[Expo.Meter]
[Menu Guide]
[Direct Focus Area]
[LVF Disp.Style]
[Shoot w/o Lens]
[Focus/Release Priority]
[Monitor Disp. Style]
[AF+MF]
[Monitor Info. Disp.]
[MF Assist]
[Rec Area]
[Setup]
This menu lets you perform the clock settings, select the operating beep tone settings and set
other settings which make it easier for you to operate the camera.
You can also configure the settings of Wi-Fi related functions.
[Clock Set]
[Economy]
[Self Timer Auto Off]
[World Time]
[USB Mode]
[No.Reset]
[Travel Date]
[TV Connection]
[Reset]
[Wi-Fi]
[Menu Resume]
[Reset Wi-Fi Settings]
[Beep]¢
[Menu Background]
[Pixel Refresh]
[Live View Mode]
[Menu Information]
[Sensor Cleaning]
[Monitor Display]/[Viewfinder]
[Language]
[Format]
[Monitor Luminance]
[Version Disp.]
¢ This allows you to set the volume for electronic sound and the electronic shutter sound.
[Playback]
This menu lets you set the Protection, Cropping or Print Settings, etc. of recorded pictures.
[2D/3D Settings]
[Text Stamp]
[Rotate Disp.]
[Slide Show]
[Video Divide]
[Favorite]
[Playback Mode]
[Time Lapse Video]
[Print Set]
[Location Logging]
[Stop Motion Video]
[Protect]
[RAW Processing]
[Resize]
[Face Rec Edit]
[Clear Retouch]
[Cropping]
[Picture Sort]
[Title Edit]
[Rotate]
[Delete Confirmation]
(ENG) SQT1122
57
DMC-GX8WC_SG-SQT1122_eng.book 58 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Others
Troubleshooting
First, try out the following procedures.
If the problem is not resolved, it may be improved by selecting [Reset] on the
[Setup] menu.
• Please also refer to the “Operating Instructions for advanced features (PDF format)”, which
describes more detailed information.
The camera cannot be operated even when it is turned on.
The camera turns off immediately after it is turned on.
• The battery is exhausted.
> Charge the battery.
• If you leave the camera on, the battery will be exhausted.
> Turn the camera off frequently by using the [Economy] etc.
The battery becomes flat too quickly.
• Is the drive mode set to [
] ([4K Pre-Burst])? When [
battery drains faster.
> Select [
] ([4K Pre-Burst]) only when recording.
] ([4K Pre-Burst]) is selected, the
Taking pictures is not possible.
The shutter will not operate immediately when the shutter button is pressed.
• When the drive mode is set to [
] ([4K Pre-Burst]), the camera temperature rises. In some
cases, the camera may display [
], switch to [
] ([4K Burst]) and stop the recording to
protect itself. Wait until the camera cools down.
The subject is not focused properly.
• The subject is beyond the focus range of the camera. (P21)
• There is camera shake (jitter) or the subject is moving slightly.
• Is [Focus/Release Priority] in the [Custom] menu set to [RELEASE]?
• Is [Shutter AF] in the [Custom] menu set to [OFF]?
• Is the AF Lock applied incorrectly?
The recorded picture is blurred.
The Image Stabiliser is not effective.
• The shutter speed will become slower and the Image Stabiliser function may not work properly
when taking pictures especially in dark places.
> We recommend holding the camera firmly with both hands when taking pictures.
> We recommend using a tripod and the self-timer when taking pictures with a slow shutter
speed.
• When a moving subject is recorded with the electronic shutter, the subject may appear
distorted on the picture.
58
SQT1122 (ENG)
DMC-GX8WC_SG-SQT1122_eng.book 59 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Others
The subject appears distorted on the picture.
• If you record a moving subject when using the electronic shutter or recording motion picture or
a 4K photo, the subject may appear distorted on the picture. This is characteristic of MOS
sensors which serve as the camera’s pickup sensors. This is not a malfunction.
Striping or flicker may appear under lighting such as fluorescent lighting and
LED lighting fixture.
• This is characteristic of MOS sensors which serve as the camera’s pickup sensors.
This is not a malfunction.
• Are you taking pictures with the electronic shutter?
> When using the electronic shutter, lowering the shutter speed may reduce the effect of the
horizontal stripes.
• If noticeable flicker or striping is seen under lighting such as a fluorescent or LED lighting fixture
when recording motion pictures, you can reduce the flicker or striping by setting up [Flkr
Decrease] and fixing the shutter speed. It is possible to select a shutter speed from [1/50], [1/60],
[1/100], or [1/120]. You can set the shutter speed manually in the Creative Video Mode. (P29)
The brightness or the hue of the recorded picture is different from the actual scene.
• When recording under fluorescent or LED lighting fixture, etc., increasing the shutter speed
may introduce slight changes to brightness and colour. These are a result of the characteristics
of the light source and do not indicate a malfunction.
• When recording subjects in extremely bright locations or recording under fluorescent lighting,
LED lighting fixture, mercury lamp, sodium lighting, etc., the colours and screen brightness may
change or horizontal striping may appear on the screen.
4K photo recording stops before finishing.
• When the ambient temperature is high or recording with [
] ([4K Burst]) or [
]
([4K Burst(S/S)]) of the 4K Photo function is performed continuously, the camera may display
[
] and stop the recording to protect itself. Wait until the camera cools down.
Recording motion pictures is not possible.
• You may not be able to record for a short while after turning this unit on when using a large capacity card.
Motion picture recording stops in the middle.
• When the ambient temperature is high or motion picture is recorded continuously, the camera
may display [
] and stop the recording to protect itself. Wait until the camera cools down.
The screen may be blacked out momentarily, or the unit may record noise.
• Depending on the environment at the time of motion picture recording, the screen may be
blacked out momentarily or the unit may record noise due to static electricity or powerful
electromagnetic waves (radio towers, high voltage power lines, etc.).
Sometimes it is difficult to focus with Auto Focus when recording 4K motion pictures.
• This phenomenon occurs when the camera is trying to record with highly accurate focus at a
reduced Auto Focus speed, and is not a malfunction.
(ENG) SQT1122
59
DMC-GX8WC_SG-SQT1122_eng.book 60 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Others
The flash is not activated.
• When the electronic shutter is used, the flash is not activated.
> Set [Electronic Shutter] to [OFF].
• When [Silent Mode] is set to [ON], the flash is not activated.
> Set [Silent Mode] to [OFF].
The flash is activated 2 times.
• (Except for when [Firing Mode] in [Flash] is set to [MANUAL]) The flash is activated 2 times.
The interval between the first and second flash is longer when Red-Eye Reduction is set so the
subject should not move until the second flash is activated.
The picture is not played back.
There are no recorded pictures.
• Is the card inserted?
• Is there a picture on the card?
• Is this a folder or picture which was processed in the PC?
If it is, it cannot be played back by this unit.
> It is recommended to use the “PHOTOfunSTUDIO” software in the DVD (supplied) to write
pictures from PC to card.
• Has [Playback Mode] been set for playback?
> Change to [Normal Play].
The folder number and the file number are displayed as [—] and the screen turns
black.
• Is this a non-standard picture, a picture which has been edited using a PC or a picture which
was taken by another make of digital camera?
• Did you remove the battery immediately after picture-taking or did you take the picture using a
battery with a low remaining charge?
> To delete such pictures, make a backup of the data and format the card (P17).
[Thumbnail is displayed] appears on the screen.
• Is it a picture that has been recorded with other equipment?
In such cases, these pictures may be displayed with a deteriorated picture quality.
Motion pictures recorded with this model cannot be played back on other
equipment.
• The picture quality or sound quality of recorded motion pictures may be deteriorated even when
these are played back with the compatible devices. Also, recording information may not be
displayed correctly.
60
SQT1122 (ENG)
DMC-GX8WC_SG-SQT1122_eng.book 61 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Others
A Wi-Fi connection cannot be established.
Radio waves get disconnected.
Wireless access point is not displayed.
∫ General tips for using a Wi-Fi connection
• Use within the communication range of the device to be connected.
• Is any device, such as microwave oven, cordless phone, etc., that uses 2.4 GHz frequency
operated nearby?
> Radio waves may get interrupted when used simultaneously. Use them sufficiently away
from the device.
• When the battery indicator is flashing red, the connection with other equipment may not start or
the connection may be disrupted.
(A message such as [Communication error] is displayed.)
• If you place the camera on a metal table or shelf, the radio waves may be adversely affected. In
such cases, you may not be able to establish a connection. Move the camera away from the
metal surface.
∫ About a wireless access point
• Check if the wireless access point to connect is in operating state.
• The camera may not display or connect to a wireless access point depending on the radio
wave condition.
> Move this unit closer to the wireless access point.
> Remove the obstacles between this unit and the wireless access point.
> Change the direction of this unit.
> Change the location and orientation of the wireless access point.
> Perform the [Manual Input].
• It may not display even if the radio waves exist depending on the setting of the wireless access
point.
> Check the settings of the wireless access point.
> When the network SSID of the wireless access point is set not to broadcast, the wireless
access point may not be detected. Enter the network SSID to start the connection or enable
the SSID broadcast of the wireless access point.
• Connection types and security setting methods are different depending on the wireless access
point. (Refer to the operating instructions of the wireless access point.)
• Is the 5 GHz/2.4 GHz switchable wireless access point connected to other equipment using the
5 GHz band?
> The use of a wireless access point that can use 5 GHz/2.4 GHz simultaneously is
recommended. It cannot be used simultaneously with this camera if it is not compatible.
(ENG) SQT1122
61
DMC-GX8WC_SG-SQT1122_eng.book 62 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Others
Images cannot be transmitted to a PC.
• When the firewall of the OS, security software, etc. is enabled, connecting to the PC may not
be possible.
When I try to set up a Wi-Fi connection with a Windows 8 PC, my user name and
password are not recognised, so I cannot connect to the PC.
• Some OS versions, including Windows 8, use two types of accounts: a local account and a
Microsoft account.
> Be sure to use the user name and password for the local account.
If you haven’t set up a local account, please create one.
The PC is not recognised when I use a Wi-Fi connection. The camera cannot be
connected to PC via Wi-Fi connection.
• The default workgroup name is set to “WORKGROUP”. If you changed the workgroup name,
the PC will not be recognised.
In [Change Workgroup Name] in [PC Connection] of the [Wi-Fi Setup] menu, change the
workgroup name to that of the PC you are connecting to.
• Please confirm login name and password are correctly typed.
• When the system time of Mac computer or Windows PC connected to a camera differs severely
from that of the camera, the camera cannot be connected to the computer or PC in some OSs.
> Please confirm [Clock Set] and [World Time] of the camera matches with time, date and
time zone in Windows PC or Mac computer. When both settings do not match severely,
please match them.
Transmission of the image fails midway. Some images cannot be transmitted.
• Image cannot be transmitted when the battery indicator is flashing red.
• Is the size of the image too large?
> Reduce the image size at [Size], and then send.
> Transmit after dividing the motion picture with [Video Divide].
• File format of the motion picture that can be sent differs depending on the destination.
• Capacity or number of images in the web service is full.
> Login to “LUMIX CLUB”, and check the status of the destination on the web service link
settings.
Cannot be connected using NFC.
• Is your smartphone compatible with NFC?
> This unit can be used with NFC-compatible terminals via Android.
• Make sure the NFC function of your smartphone is ON.
• Some smartphones cannot be easily checked simply by touching.
> If the camera is not recognised even after touching, change positions and try again by
touching slowly.
• If the duration of touching is short, the smartphone may not be recognised.
> Touch and hold the smartphone for a while.
62
SQT1122 (ENG)
DMC-GX8WC_SG-SQT1122_eng.book 63 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Others
The motion pictures cannot be played back on a TV.
• Are you trying to play back the motion pictures by directly inserting the card in the card slot of
the TV?
> Connect the camera to the TV with the AV cable (optional), or with the HDMI micro cable,
and then play back the motion pictures on the camera.
VIERA Link does not work.
• Is it connected properly with the HDMI micro cable?
• Is the [VIERA Link] on this unit set to [ON]?
> If the input channel does not switch automatically, use the remote control for the TV to
switch it.
> Check the VIERA Link setting on the connected device.
> Turn this unit off and on.
> Set [HDAVI Control] to [Off] on the TV and then turn it back to [On].
(Refer to the operating instructions of the TV for details.)
There is a sound from lens unit.
• It is a sound of lens movement or aperture operation when this unit is turned on or off, and it is
not a malfunction.
• The sound, which is caused by the automatic adjustment of the aperture, is heard when the
brightness has changed due to, for example, zooming or the movement of the camera. This is
not a malfunction.
The camera becomes warm.
• The surface of the camera and the reverse side of the monitor may become warm during use.
This does not affect the performance or quality of the camera.
The clock is reset.
• If you do not use the camera for a long time, the clock may be reset.
> [Please set the clock] message will be displayed; please reset the clock. (P19)
(ENG) SQT1122
63
DMC-GX8WC_SG-SQT1122_eng.book 64 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Others
Specifications
Specifications are subject to change without notice.
Digital Camera Body (DMC-GX8):
Information for your safety
8.4 V)
Power Source:
DC 8.4 V (
Power Consumption:
2.8 W (When recording with Monitor)
[When the Interchangeable lens (H-FS1442A) is used]
2.8 W (When recording with Monitor)
[When the Interchangeable lens (H-FS45150) is used]
1.9 W (When playing back with Monitor)
[When the Interchangeable lens (H-FS1442A) is used]
1.9 W (When playing back with Monitor)
[When the Interchangeable lens (H-FS45150) is used]
Camera effective pixels
20,300,000 pixels
Image sensor
4/3q Live MOS sensor, total pixel number 21,770,000 pixels,
Primary colour filter
Digital Zoom
Max. 4k
Extra Tele Conversion
When taking still pictures:
Max. 2k (When a picture size of [S] (4 M), aspect ratio of [4:3] is
selected.)
When recording motion pictures:
2.7k/4.0k/5.4k
Focus
Auto Focus/Manual Focus,
Face/Eye Detection/Tracking/49-area-focusing/Custom Multi/1area-focusing/Pinpoint (Touch focus area selection possible)
Shutter type
Focal-plane shutter
Burst recording
Burst speed
Number of recordable
pictures
64
SQT1122 (ENG)
Mechanical
shutter
8 pictures/second (High speed, AFS),
6 pictures/second (High speed, AFC),
5.5 pictures/second (Middle speed, AFS),
6 pictures/second (Middle speed, AFC),
2 pictures/second (Low speed)
Electronic
shutter
40 pictures/second (Super high speed),
10 pictures/second (High speed, AFS),
6 pictures/second (High speed, AFC),
6 pictures/second (Middle speed),
2 pictures/second (Low speed)
When there are RAW files: 30 or higher pictures
When there are no RAW files: 100 or higher pictures
¢ When recording is performed under the test conditions
specified by Panasonic
DMC-GX8WC_SG-SQT1122_eng.book 65 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Others
ISO sensitivity
(Standard Output
Sensitivity)
AUTO/
/100¢/200/400/800/1600/3200/6400/12800/25600
(1/3 EV step change possible)
¢ Only available when [Extended ISO] is set.
Minimum Illumination
Approx. 9 lx (when i-Low light is used, the shutter speed is
1/25th of a second)
[When the Interchangeable lens (H-FS1442A) is used]
Approx. 12 lx (when i-Low light is used, the shutter speed is
1/25th of a second)
[When the Interchangeable lens (H-FS45150) is used]
Shutter speed
Still picture:
B (Bulb) (Max. approx. 30 minutes), 60 seconds to 1/8000th of a
second (Mechanical shutter),
1 second to 1/16000th of a second (Electronic shutter)
Motion picture:
1/25th of a second to 1/16000th of a second
Metering range
EV 0 to EV 18
White Balance
Auto White Balance/Daylight/Cloudy/Shade/Incandescent lights/Flash/
White set1/White set2/White set3/White set4/White Balance K set
Exposure (AE)
Programme AE (P)/Aperture-priority AE (A)/Shutter-priority AE
(S)/Manual exposure (M)/AUTO
Exposure Compensation (1/3 EV Step, j5 EV to i5 EV)
Light metering system,
Light metering mode
1728-zone multi-pattern sensing system,
Multiple/Centre weighted/Spot
Monitor
3.0q OLED Monitor (3:2) (Approx. 1,040,000 dots)
(field of view ratio about 100%)
Touch screen
Viewfinder
OLED Live Viewfinder (4:3) (Approx. 2,360,000 dots)
(field of view ratio about 100%)
[Magnification approx. 1.54k, 0.77k (35 mm film camera
equivalent), with 50 mm lens at infinity; j1.0 mj1]
(with diopter adjustment j4 to i3 diopter)
Flash Mode
AUTO, AUTO/Red-Eye Reduction, Forced ON, Forced ON/ RedEye Reduction, Slow Sync., Slow Sync./Red-Eye Reduction,
Forced OFF
Flash synchronisation
speed
Equal to or smaller than 1/250th of a second
Microphone
Stereo
Speaker
Monaural
Recording media
SD Memory Card/SDHC Memory Card¢/SDXC Memory Card¢
(¢ UHS-I UHS Speed Class 3)
(ENG) SQT1122
65
DMC-GX8WC_SG-SQT1122_eng.book 66 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Others
Picture size
Still picture
When the aspect ratio setting is [4:3]
5184k3888 pixels, 3712k2784 pixels, 2624k1968 pixels
When the aspect ratio setting is [3:2]
5184k3456 pixels, 3712k2480 pixels, 2624k1752 pixels
When the aspect ratio setting is [16:9]
5184k2920 pixels, 3840k2160 pixels, 1920k1080 pixels
When the aspect ratio setting is [1:1]
3888k3888 pixels, 2784k2784 pixels, 1968k1968 pixels
Recording quality
Motion pictures
Quality
[AVCHD]
1920k1080 (FHD/50p: 28 Mbps), 50p recording/
1920k1080 (FHD/50i: 17 Mbps), 50i recording/
1920k1080 (FHD/25p: 24 Mbps), 50i recording¢/
1920k1080 (FHD/24p: 24 Mbps), 24p recording
¢ Sensor output is 25 frames/sec.
[MP4]
3840k2160 (4K/25p: 100 Mbps)/
3840k2160 (4K/24p: 100 Mbps)/
1920k1080 (FHD/50p: 28 Mbps)/
1920k1080 (FHD/25p: 20 Mbps)/
1280k720 (HD/25p: 10 Mbps)/
640k480 (VGA/25p: 4 Mbps)
RAW/RAWiFine/RAWiStandard/Fine/Standard/MPOiFine/
MPOiStandard
Recording file format
Still Picture
Motion pictures
Audio compression
RAW/JPEG (based on “Design rule for Camera File system”,
based on “Exif 2.3” standard, DPOF corresponding)/MPO
AVCHD Progressive/AVCHD/MP4
AVCHD
DolbyR Digital (2 ch)
MP4
AAC (2 ch)
Interface
Digital
“USB 2.0” (High Speed)
Analogue video/audio NTSC/PAL Composite (Switched by menu)
Audio line output (monaural)
66
SQT1122 (ENG)
DMC-GX8WC_SG-SQT1122_eng.book 67 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Others
Terminal
[REMOTE/MIC]
‰ 2.5 mm jack
[AV OUT/DIGITAL]
Dedicated jack (8 pin)
[HDMI]
micro HDMI Type D
Dimensions
Approx. 133.2 mm (W)k77.9 mm (H)k63.1 mm (D)
(excluding the projecting parts)
Mass
Approx. 487 g
[with the card and battery]
Approx. 435 g (camera body)
Approx. 597 g
[with the Interchangeable lens (H-FS1442A), card and battery]
Approx. 687 g
[with the Interchangeable lens (H-FS45150), card and battery]
Operating temperature
0 oC to 40 oC
Operating humidity
10%RH to 80%RH
Dust-proof and splashproof
Yes
Wireless transmitter
Compliance standard
IEEE 802.11b/g/n (standard wireless LAN protocol)
Frequency range used
(central frequency)
2412 MHz to 2462 MHz (1 to 11ch)
Encryption method
Wi-Fi compliant WPATM/WPA2TM
Access method
Infrastructure mode
NFC
Compliance standard
ISO/IEC 18092 NFC-F (Passive Mode)
Battery Charger (Panasonic DE-A80D):
Information for your safety
Input:
AC 110 V to 240 V, 50/60 Hz, 0.2 A
AC 100 V to 240 V, 50/60 Hz, 14 VA (100 V) to 22 VA (240 V)
(for Japan)
Output:
DC
8.4 V, 0.65 A
DC 8.4 V, 0.65 A (for Japan)
Battery Pack (lithium-ion) (Panasonic DMW-BLC12E):
Information for your safety
Voltage/capacity:
7.2 V/1200 mAh
(ENG) SQT1122
67
DMC-GX8WC_SG-SQT1122_eng.book 68 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Others
Interchangeable Lens
H-FS1442A
“LUMIX G VARIO 14 – 42 mm/
F3.5 – 5.6 II ASPH./MEGA
O.I.S.”
H-FS45150
“LUMIX G VARIO 45 – 150 mm/
F4.0 – 5.6 ASPH./MEGA O.I.S.”
Focal length
f=14 mm to 42 mm
(35 mm film camera equivalent:
28 mm to 84 mm)
f=45 mm to 150 mm
(35 mm film camera equivalent:
90 mm to 300 mm)
Aperture type
7 diaphragm blades/circular
aperture diaphragm
7 diaphragm blades/circular
aperture diaphragm
Aperture range
F3.5 (Wide) to F5.6 (Tele)
F4.0 (Wide) to F5.6 (Tele)
Minimum aperture value F22
F22
Lens construction
9 elements in 8 groups
(2 aspherical lenses)
12 elements in 9 groups
(2 aspherical lenses, 1 UHR
Lens)
Nano surface coating
None
None
In focus distance
0.2 m to ¶ (from the focus
distance reference line)
(focal length 14 mm to 20 mm),
0.3 m to ¶ (from the focus
distance reference line)
(focal length 21 mm to 42 mm)
0.9 m to ¶ (from the focus
distance reference line)
Maximum image
magnification
0.17k (35 mm film camera
equivalent: 0.34k)
0.17k (35 mm film camera
equivalent: 0.35k)
Optical Image Stabiliser
Available
Available
[O.I.S.] switch
None
(Setting of the [Stabilizer] is
done in [Rec] menu.)
None
(Setting of the [Stabilizer] is
done in [Rec] menu.)
Mount
“Micro Four Thirds Mount”
“Micro Four Thirds Mount”
Angle of view
75x (Wide) to 29x (Tele)
27x (Wide) to 8.2x (Tele)
Filter diameter
46 mm
52 mm
Max. diameter
Approx. 56 mm
Approx. 62 mm
Overall length
Approx. 49 mm
(from the tip of the lens to the
base side of the lens mount)
Approx. 73 mm
(from the tip of the lens to the
base side of the lens mount)
Mass
Approx. 110 g
Approx. 200 g
Dust-proof and splashproof
None
None
68
SQT1122 (ENG)
DMC-GX8WC_SG-SQT1122_eng.book 69 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Others
Digital Camera Accessory System
Description
Accessory#
Battery Pack
DMW-BLC12
AC Adaptor¢1
DMW-AC10
DC Coupler¢1
DMW-DCC8
LED Video Light
VW-LED1
Flash
DMW-FL360L, DMW-FL580L
Stereo Microphone
DMW-MS1
Shutter Remote Control
DMW-RSL1
Eyecup
DMW-EC3
Body Cap
DMW-BDC1
Tripod Adaptor¢2
DMW-TA1
USB connection Cable
DMW-USBC1
AV Cable
DMW-AVC1
Mount Adaptor
DMW-MA1, DMW-MA2M, DMW-MA3R
¢1 The AC Adaptor (optional) can only be used with the designated Panasonic DC Coupler
(optional). The AC adaptor (optional) cannot be used by itself.
¢2 Use if the attached lens is in contact with the tripod pedestal.
Product numbers correct as of July 2015. These may be subject to change.
• Some optional accessories may not be available in some countries.
• NOTE: Accessories and/or model numbers may vary between countries. Consult your local dealer.
• For lens-related optional accessories such as compatible lenses and filters, refer to catalogues/
Web pages, etc.
(ENG) SQT1122
69
DMC-GX8WC_SG-SQT1122_eng.book 70 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Others
Reading the Operating Instructions (PDF format)
More detailed instructions on the operation of this camera are contained in
“Operating Instructions for advanced features (PDF format)” in the supplied DVD.
∫ For Windows
1 Turn the PC on and insert the DVD containing the Operating Instructions
(supplied).
• If the automatic playback screen is displayed, you can display the menu by selecting and
executing [Launcher.exe].
• In Windows 8/Windows 8.1, you can display the menu by clicking a message that is
displayed after inserting the DVD and then selecting and executing [Launcher.exe].
• You can also display the menu by double-clicking [SFMXXXX] in [Computer] (XXXX
2
3
differs depending on the model).
Click the [Operating Instructions].
• The list of Operating Instructions (PDF format) will be displayed.
Click the language of the Operating Instructions you want to open.
• The “Operating Instructions for advanced features (PDF format)” will open.
You can save the “Operating Instructions for advanced features” on the PC.
• You will need Adobe Reader to browse or print the “Operating Instructions for advanced
features (PDF format)”.
You can download and install a version of Adobe Reader that you can use with your OS from the
following website. (As of July 2015)
http://www.adobe.com/products/acrobat/readstep2.html
∫ For Mac
1 Turn the PC on and insert the DVD containing the Operating Instructions
(supplied).
2 Open the “Manual” folder in the DVD.
3 Double click the [INDEX.pdf].
• The list of Operating Instructions (PDF format) will be displayed.
4 Click the language of the Operating Instructions you want to open.
• The “Operating Instructions for advanced features (PDF format)” will open.
You can save the “Operating Instructions for advanced features” on the PC.
• You can also open the “Operating Instructions for advanced features (PDF format)” directly
from the “Manual” folder.
70
SQT1122 (ENG)
DMC-GX8WC_SG-SQT1122_eng.book 71 ページ ２０１５年８月２１日
金曜日
午前８時２９分
Others
This product incorporates the following software:
(1) the software developed independently by or for Panasonic Corporation,
(2) the software owned by third party and licensed to Panasonic Corporation, and/or
(3) open source software
The software categorised as (3) is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY
or FITNESS FOR A PARTICULAR PURPOSE.
Please refer to the detailed terms and conditions thereof displayed by selecting [MENU/
SET] > [Setup] > [Version Disp.] > [Software info].
• G MICRO SYSTEM is a lens exchange type digital camera
system of LUMIX based on a Micro Four Thirds System
standard.
• Micro Four Thirds™ and Micro Four Thirds Logo marks are
trademarks or registered trademarks of Olympus Imaging
Corporation, in Japan, the United States, the European Union
and other countries.
• Four Thirds™ and Four Thirds Logo marks are trademarks or
registered trademarks of Olympus Imaging Corporation, in
Japan, the United States, the European Union and other
countries.
• SDXC Logo is a trademark of SD-3C, LLC.
• “AVCHD”, “AVCHD Progressive” and the “AVCHD Progressive”
logo are trademarks of Panasonic Corporation and Sony
Corporation.
• Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
• HDMI, the HDMI Logo, and High-Definition Multimedia Interface
are trademarks or registered trademarks of HDMI Licensing
LLC in the United States and other countries.
• HDAVI Control™ is a trademark of Panasonic Corporation.
• Adobe is a trademark or registered trademark of Adobe Systems Incorporated in the United
States and/or other countries.
• Pentium is a trademark of Intel Corporation in the U.S. and/or other countries.
• iMovie, Mac and Mac OS are trademarks of Apple Inc., registered in the U.S. and other
countries.
• iPad, iPhone, iPod, and iPod touch are trademarks of Apple Inc., registered in the U.S. and
other countries.
• App Store is a service mark of Apple Inc.
• Windows and Windows Vista are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
(ENG) SQT1122
71
DMC-GX8WC_SG-SQT1122_eng.book 72 ページ ２０１５年８月２１日
金曜日
午前８時２９分
• Android and Google Play are trademarks or registered
trademarks of Google Inc.
• The Wi-Fi CERTIFIED™ Logo is a certification mark of
Wi-Fi AllianceR.
• The Wi-Fi Protected Setup™ Identifier mark is a
certification mark of Wi-Fi AllianceR.
• “Wi-FiR” and “Wi-Fi DirectR” are registered trademarks of
Wi-Fi AllianceR.
• “Wi-Fi Protected Setup™”, “WPA™”, and “WPA2™” are
trademarks of Wi-Fi AllianceR.
• DLNA, the DLNA Logo and DLNA CERTIFIED are
trademarks, service marks, or certification marks of the
Digital Living Network Alliance.
• This product uses “DynaFont” from DynaComware Corporation. DynaFont is a registered
trademark of DynaComware Taiwan Inc.
• QR Code is a registered trademark of DENSO WAVE INCORPORATED.
• Other names of systems and products mentioned in these instructions are usually the
registered trademarks or trademarks of the manufacturers who developed the system or
product concerned.
This product is licensed under the AVC Patent Portfolio License for the personal use of a
consumer or other uses in which it does not receive remuneration to (i) encode video in
compliance with the AVC Standard (“AVC Video”) and/or (ii) decode AVC Video that was
encoded by a consumer engaged in a personal activity and/or was obtained from a video
provider licensed to provide AVC Video. No license is granted or shall be implied for any other
use. Additional information may be obtained from MPEG LA, L.L.C.
See http://www.mpegla.com
Panasonic Corporation
Web Site: http://www.panasonic.com
 Panasonic Corporation 2015