Dynasty Spas Hot Tub in.k600 User manual

Show HTML Add to My manuals
2 Pages

advertisement

Dynasty Spas Hot Tub in.k600 User Manual | Manualzz
Quick Reference Card
Please consult your spa user manual for complete info on the features of your spa system.
in.k600
full-function keypad that gives
complete control to wet fingers!
Aeware's advanced in.k600 keypad features a low
profile with a large LCD display, streamlined interface
and raised keys that let users easily control all in.xm
functions and programming directly from spa side,
creating a true and unique user experience.
Function Description
Light icon
Pump icons
"Plus" Key
Blower icon
Time, temperature
& message digits
"Light" Key
"Ok" Key
"Program" Key
AM/PM (˚F/ ˚C)
Set point icon
Progress bar icon
Service icon
"Pump" Keys
Heating icon
Filtering icon
Smart winter
mode icon
"Right" Key
Spa Functions
Program icon
"Minus" Key "Standby" Key
"Left" Key
Pump 1 key
Pump 2 key
In order to warn the user, the spa
light will flash for a few seconds
before the exit of Standby mode
and restart the pumps. The "Stby"
message is also displayed during
Standby mode.
Press Pump 1 key to turn Pump 1 on
at low speed. Press a second time
to turn pump at high speed. Press a
third time to turn pump off.
Press Pump 2 key to turn Pump 2
on at high speed. Press a second
time to turn pump off.
*Pump 3 key
Blower key
Light key
Press Pump 3 key to turn Pump 3 on
at high speed. Press a second time
to turn pump off.
Press Blower key to turnblower
on. Press a second time to turn
blower off.
Press Light key to turn light on.
Press a second time to turn light off.
A built-in timer automatically
turns pump off after 20 minutes,
unless pump has been manually
deactivated first.
A built-in timer automatically
turns blower off after 20 minutes,
unless blower has been manually
deactivated first.
Standby Mode
When this feature is activated, it
allows to stop all pumps at the same
time by a simple click of a button!
Use Standby key to pause all
pumps.
Progress bar will display the remaining time
before the system automatically exits Standby
mode (user can also exit Standby mode at any
time by pressing again on Standby key).
* Pump 3 option available with
in.xm Spa Packs only.
A built-in timer automatically
turns pump off after 20 minutes,
unless pump has been manually
deactivated first.
A built-in timer automatically turns
light off after 2 hours, unless it has
been manually deactivated first.
A built-in timer automatically
turns pump off after 20 minutes,
unless pump has been manually
deactivated first.
/- keys
Use (+) or (-) key to set desired
water temperature. The temperature setting will be displayed for
5 seconds to confirm your new
selection.
The "Set Point" icon indicates that
the display shows the desired
temperature, NOT the current
water temperature!
Programming
Program key
Setting the time
Setting filter cycle start time
Setting filter cycle duration
Use Program key to display time
or enter Programming menu by
pressing and holding key.
In Programming mode,
the following parameters can be
set: time, filter cycle’s start time,
duration, frequency, and the choice
of temperature display units.
Enter Programming mode by
holding Prog. key pressed down
for 3 sec. The display will show the
current time setting.
To program the filter cycle, you
must enter these parameters: the
start time, duration and frequency.
During a filter cycle, pumps run for
one minute to purge the plumbing,
then Pump 1 low speed runs for the
programmed number of hours.
Press Ok key a third time.
Setting the hour:
Use (+) or (-) key to change hour
setting (AM/PM).
Setting the minutes:
Press Ok key.
Use (+) or (-) key to change
minutes setting.
The display will show Fdxx, with “xx”
representing the duration in hours.
Use (+) or (-) key to change setting
(0-12 hours).
Press Ok key a second time.
The display will show FSxx, with "xx"
representing the starting hour.
Use (+) or (-) key to change setting
(01:00- 12:00 AM/PM).
Filter
ilter cycle frequency
Setting Economy mode
Setting Economy start time
Setting Economy duration
Press Ok key a fourth time.
The Economy mode allows you to
lower the temperature set point
of the spa by 20 °F (11 °C) during a
certain period of the day.
• Press Ok key a fifth time.
• Use (+) key to enable the economy
mode, the display will show EP 1.
• Use (-) key to disable economy
mode, the display will show EP 0.
To program the Economy mode, you
must enter two parameters: the start
time and the duration.
• Press Ok key a sixth time.
• The display will show ESxx, with
“xx” representing the starting hour.
• Use (+) or (-) key to change setting
(0:00 h - 23:00h).
• Press Ok key an seventh time.
• The display will show Edxx, with
“xx” representing the duration
in hours.
• Use (+) or (-) key to change setting.
If the Economy mode is not required the duration must be set to
“0”. If continuous activation of the
Economy mode is required the
duration must be set to “24”.
Water temperature regulation
Smart Winter Mode
Setting Economy duration
Setting temperature unit
In a regulation cycle, the system first
generates water flow through the
heater housing and the plumbing,
in order to ensure accurate water
temperature readings as well as
avoiding heater activation in dry
conditions.
Our Smart Winter Mode protects
your system from the cold by turning pumps on several times a day to
prevent water from freezing in pipes.
When in Economy mode, the “Econ”
message is displayed.
Water temperature can be displayed
in either Fahrenheit (˚F) or Celsius (˚C).
• Press Ok key a eighth time.
• The display will show either
˚F or ˚C.
• Use (+) or (-) key to change setting.
• Press Ok key a last time to go back
to normal mode.
The display will show FFxx, with "xx"
representing the number of filter
cycles per day (up to 4).
Other features
Use (+) or (-) key to change setting.
Icon Description
After verifying pump activation and
taking a water temperature reading
if required, the system automatically
turns the heater on to reach and
maintain water temperature at
Set Point.
Cooldown
While performing these tasks,
the heater is not allowed to turn
on and its icon flashes. The heater
is not allowed also to come on
throughout the cool down period
of the heater element.
Light icon: The "Light" icon lights up when the light is on.
Program icon: The "Program" icon lights up when Programming.
Pumps icons
icons: The "Pump" indicator numbers light up and their
icons become animated when pumps are on.
Progress bar
bar: A visual indication of the time remaining before an
equipment is turned off or before the end of the standby mode.
Smart winter mode icon: The "SWM" icon automatically turns
on when freeze protection is active. It flashes while system
purges the spa plumbing.
Set Point icon: The "Set Point" icon automatically turns on when
set point setting menu is activated. (SP message on display).
It flashes when:
1- there is a call for heat and heater has not started yet,
2- heater has just turned off and element is cooling down or
3- if system is performing a check flow.
Filter Cycle icon
icon: The "Filter Cycle" icon lights up when filter cycle
is on. It flashes when filtering is suspended.
Heater icon: The "Heater" icon lights up when the heater is on.
Blower icon: The “Blower” icon lights up when blower is on.
9919-100xxx
Service icon: A problem has been detected.
Do not enter the water! Spa service is required.
www.geckoalliance.com

advertisement

Key Features

  • Full-function keypad for wet finger control
  • Large LCD display for clear visibility
  • Raised keys for easy operation
  • Control all spa functions and programming from the keypad
  • Standby mode to pause all pumps simultaneously
  • Smart Winter Mode to prevent freezing
  • Economy mode to lower temperature set point
  • Temperature regulation for accurate readings and heater activation
  • Cooldown feature to prevent heater activation during priming

Related manuals

Frequently Answers and Questions

How do I turn on Pump 1?
Press the Pump 1 key once for low speed and twice for high speed.
What does the Standby mode do?
It pauses all pumps simultaneously for easy access.
How do I set the desired water temperature?
Use the +/- keys and confirm your selection by pressing the Ok key.
What is the Smart Winter Mode?
It turns pumps on periodically to prevent water from freezing in pipes during cold weather.
How do I activate the Economy mode?
Press the Ok key five times and use the + key to enable it.
Download PDF

advertisement