Hypercom Network Router 1202 User manual

Hypercom Network Router 1202 User manual
IN-tact ® 1202
Easy, secure and low-cost IP dial backup.
Product Data
The Hypercom IN-tact series of products are IP gateway devices that provide
protocol conversion and secure managed connections for dial terminals. The
IN-tact 1202 allows you to fearlessly use your current POS dial terminals with
its backup capabilities and take advantage of a DSL, cable modem or VPN
Ethernet connection to access a host interface using TCP/IP.
Key Features
• Supports dial terminals or ATM connections
• Seamlessly delivers transactions to a backup host in the event the
primary host is unavailable
• Supports multiple dial protocols and conforms to industry standards
• Supports DTMF digit routing
• Redundant TCP/IP and connection to backup host destinations
• Connects to an external wireless modem for use of GPRS as backup to
broadband or as primary connection
• Connects to an external analog modem for use of PPP over dial as
backup to broadband or as a primary connection
• 10/100mps auto-sensing
• SSL connection to a remote SSL server ensures secure transaction
over the Internet
• Easy to install
• Supports SNMP for existing customer management systems
• Provides secure management via a standard Web browser
Whether you're looking for a reliable payment terminal, innovative,
value-add technology, or a complete electronic transaction management
system, Hypercom can deliver. Our product portfolio ranges from basic
credit authorization to full transaction transport and more. Hypercom is
more than a one-stop shop for payment terminals, it's a provider of
complete, end-to-end transaction solutions that expand the possibilities
at the POS in ways that translate to greater profits.
www.hypercom.com
IN-tact ® 1202
Easy, secure and low-cost IP dial backup.
Technical Specifications:
Ease of Use
Protocols
• Simple and intuitive Web management facility allows the device to be pre-configured
prior to delivery to the point of installation,saving time and training
• SNMP capabilities along with the Web interface allow remote upgrades
• Easy-to-install procedure allows devices to be delivered fully configured to customer
locations.
• Dial port: Visa I/II spoofed, SDLC, asynchronous,
transparent
• Modem: V.21/Bell 103, V.33/Bell 212A, V.22bis,
V.29, V.34, V.90
• Ethernet LAN: TCP/IP, HTTP, HTTPS, SSL
and SNMP
External Power Supply
• Input: 110/220, 50/60 Hz
• Output: 24 VDC, 1 A
Footprint
• 6.0 in x 8.0 in x 1.5 in/15.2 cm x 20.3 cm x 3.8 cm
Weight
• .9 lbs/0.41 kg
Environment
•
•
•
•
Temperature: 0-40°C/32-104°F
Humidity: Max 95% RH, non-condensing
Altitude: 0-10,000 ft/0-3.048 meters
Vibration: 0.03 in, maximum displacement to 0,05G
sine peak, 3 orthogonal axes, 5-500-5 Hz
Reliability
Security
• Industry-standard SSL connection to a remote SSL server ensures secure transactions
over the Internet
• Integrated Web server allows secure management via a standard Web browser
• SNMP services for use with existing customer-provided management systems
• Redundant TCP/IP and connection to backup host destinations
• Transactions are delivered seamlessly to a backup host in the event the primary host
is not available.
Cost Savings
• Faster transaction times utilizing IP rather than dial
• Connects to existing dial terminals or ATMs, no need to replace with more expensive IP
terminals, no time lost training employees or learning a new device.
• 100,000 hours (MTBF calculated)
Certifications
This product includes software developed by the University of California, Berkeley and its contributors.
• Certified to global and local standards including CE
This product includes cryptographic software written by Eric Young ([email protected])
© 2007 Hypercom Corporation, all rights reserved. Hypercom is a
registered trademark of Hypercom Corporation. The Hypercom logo is
a trademark of Hypercom Corporation. All other products or services
mentioned in this document are trademarks, service marks, registered
trademarks or registered service marks of their respective owners.
Product Specifications subject to change without notice.
World Headquarters:
940481-001, Rev C March 2007
Hypercom Corporation | 2851 W. Kathleen Road, Phoenix, Arizona 85053, USA
Tel: +1.602.504.5000 | Fax: +1.602.504.4655 | Web: www.hypercom.com
Global Locations:
North America | Latin America | Asia/Pacific Rim | Europe | Middle East | Africa | Australia
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement