Kodak DVD Player DVT412 User manual

Installation and Operating Guide | Warranty
Model Number | DVT412 | DVD/CD Player
(Speakers: LHS-D6245T/LHS-D6245W)
© Copyright 2004, LG Electronics U.S.A., Inc.
AM-FM Receiver with Speaker System
Safety Precautions
This lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to
the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation mark within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the instructions accompanying the
product.
WARNING: Do not install this equipment in a confined space
such as a book case or similar unit.
CAUTION:
This Digital Disc Receiver employs a Laser System.
To ensure proper use of this product, please read this owner’s
manual carefully and retain it for future reference. Should the
unit require maintenance, contact an authorized service centersee back page for instructions.
Performing controls, adjustments, or carrying out procedures
other than those specified herein may result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
CAUTION: The apparatus should not be exposed to water
(dripping or splashing) and no objects filled with liquids, such
as vases, should be placed on the apparatus.
2
REGULATORY INFORMATION:
FCC Part 15
This product has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the product is
operated in a residential installation. This product generates,
uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur
in a particular installation. If this product does cause harmful
interference to radio or television reception, which can be
determined by turning the product off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the product and receiver.
• Connect the product into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
FCC WARNING: This equipment may generate or use radio
frequency energy. Changes or modifications to this equipment
may cause harmful interference unless the modifications are
expressly approved in the instruction manual. The user could
lose the authority to operate this equipment if an unauthorized
change or modification is made.
FCC COMPLIANCE: The responsible party for this product’s
compliance is:
LG Electronics U.S.A., Inc.
1000 Sylvan Avenue
Englewood Cliffs, NJ
07632, USA
Phone: 1-201-816-2125
otes on copyrights:
It is forbidden by law to copy, broadcast, show, broadcast
via cable, play in public, or rent copyrighted material without
permission.
This product is equipped with copy protection measures
developed by Macrovision. Copy protection signals are recorded on some discs. When recording these discs on a VCR,
picture noise will appear during playback.
This product incorporates copyright protection technology that
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL AND THOSE MARKED ON THE UNIT. RETAIN THIS MANUAL FOR FUTURE REFERENCE.
This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock
or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for
installation, use, and servicing.
This unit does not contain any parts that can be repaired by the user.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
1.
Read these instructions. - All these safety and
operating instructions should be read before the
product is operated.
2.
Keep these instructions. - The safety, operating
and use instructions should be retained for future
reference.
3.
Heed all warnings. - All warnings on the product
and in the operating instructions should be adhered
to.
4.
Follow all instructions. - All operating and use
instructions should be followed.
5.
Do not use this apparatus near water. – For
example: near a bath tub, wash bowl, kitchen sink,
laundry tub, in a wet basement; or near a swimming
pool; and like.
6.
Clean only with dry cloth. – Unplug this product
from the wall outlet before cleaning. Do not use
liquid cleaners.
7.
Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions. Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over- heating.
The openings should never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product should not be placed in a
built-in installation such as a bookcase or rack
unless proper ventilation is provided or the
manufacturer’s instructions have been adhered to.
8.
Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9.
Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11. Only use attachments/accessories specified by
the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
13. Unplug this apparatus during lightning storms
or when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as powersupply cord or plug is damaged, liquid has
been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
3
INTRODUCTION
IMPORTANT SAFETY INSTRUCTIONS
LH-D6245A JA1UZZS_ENGLISH
Table of Contents
Introduction
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . 2
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . 3
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6
Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Notes about Discs . . . . . . . . . . . . . . . . . . . . . . . . 6
About Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Front Panel Controls and Display Window
Indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Remote Control Buttons . . . . . . . . . . . . . . . . . . . . . 8
Rear Panel Connections . . . . . . . . . . . . . . . . . . . . . 9
Installation
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-14
TV Connections . . . . . . . . . . . . . . . . . . . . . . . . 10
External Equipment Connections . . . . . . . . . . . . 11
AM-FM Antenna Connections. . . . . . . . . . . . . . . 12
Speaker System Connections . . . . . . . . . . . . . . 13
Speaker Placement . . . . . . . . . . . . . . . . . . . . . . 14
Pre-operation . . . . . . . . . . . . . . . . . . . . . . . . . . 15-19
Mini Glossary for Audio Stream & Surround
Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Sound Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
DVD/CD player Overview . . . . . . . . . . . . . . . . . . 16
On-Screen Displays . . . . . . . . . . . . . . . . . . . . . . 16
Initial Setup. . . . . . . . . . . . . . . . . . . . . . . . . . 17-19
Initial Setup and Operation Overview . . . . . . 17
Language . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Picture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Speaker Setup. . . . . . . . . . . . . . . . . . . . . . . 18
Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Parental Control. . . . . . . . . . . . . . . . . . . . . . 19
Operation
DVD Operation . . . . . . . . . . . . . . . . . . . . . . . . . 20-22
DVD Playback . . . . . . . . . . . . . . . . . . . . . . . . . . 20
General Features . . . . . . . . . . . . . . . . . . . . . . . . 20
TITLE Selection . . . . . . . . . . . . . . . . . . . . . . 20
CHAPTER/TRACK Selection . . . . . . . . . . . . 20
Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Still Picture and Frame-by-Frame Playback . 21
Slow Motion. . . . . . . . . . . . . . . . . . . . . . . . . 21
Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . 21
Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Time Search . . . . . . . . . . . . . . . . . . . . . . . . 21
3D Surround . . . . . . . . . . . . . . . . . . . . . . . . 22
Zoom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Marker Search . . . . . . . . . . . . . . . . . . . . . . . 22
Special DVD Features . . . . . . . . . . . . . . . . . . . . 22
Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Camera Angles . . . . . . . . . . . . . . . . . . . . . . 22
Changing the Audio Language . . . . . . . . . . . 22
Changing the Audio Channel . . . . . . . . . . . . 22
Subtitles . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
4
Audio CD and MP3/WMA Disc Operation . . . . 23-24
Playing Audio CD or MP3/WMA Discs . . . . . . . . 23
Notes on MP3/WMA Recordings . . . . . . . . . . . . 23
Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Changing Tracks . . . . . . . . . . . . . . . . . . . . . 24
Repeat Track/All/Off. . . . . . . . . . . . . . . . . . . 24
Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . 24
3D Surround . . . . . . . . . . . . . . . . . . . . . . . . 24
Changing Audio Channels . . . . . . . . . . . . . . 24
JPEG File Operation . . . . . . . . . . . . . . . . . . . . . . . 25
Viewing JPEG Files . . . . . . . . . . . . . . . . . . . . . . 25
Changing Files . . . . . . . . . . . . . . . . . . . . . . 25
Still Picture . . . . . . . . . . . . . . . . . . . . . . . . . 25
Flipping the Picture . . . . . . . . . . . . . . . . . . . 25
Rotating the Picture . . . . . . . . . . . . . . . . . . . 25
Notes on JPEG Files . . . . . . . . . . . . . . . . . . 25
Programmed Playback . . . . . . . . . . . . . . . . . . . . . 26
Audio CD and MP3/WMA Disc Programmed . . . . .
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Speaker Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Additional Information . . . . . . . . . . . . . . . . . . . . . 27
Radio Operation . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Presetting Radio Stations . . . . . . . . . . . . . . . . . . 28
Listening to the Radio . . . . . . . . . . . . . . . . . . . . 28
Other Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Sleep Timer Setup . . . . . . . . . . . . . . . . . . . . . . . 29
Dimmer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Using Headphones . . . . . . . . . . . . . . . . . . . . . . 29
Reference
Language Code List . . . . . . . . . . . . . . . . . . . . . . . 30
Country Code List . . . . . . . . . . . . . . . . . . . . . . . . . 31
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . 32-33
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
About the symbols for instructions
Indicates hazards likely to harm the unit itself or
cause other material damage.
Indicates special operating features of this unit.
Indicates tips and hints for making the task easier.
Manufactured under license from Dolby Laboratories. “Dolby”,
“Pro Logic”, “MLP Lossless” and the double-D symbol are
trademarks of Dolby Laboratories.
Manufactured under license from Digital Theater Systems, Inc.
US Pat. No. 5,451,942 5,956,674, 5,974,380, 5,978,762 and
other worldwide patents issued and pending. “DTS” and “DTS
Digital Surround” are registered trademarks of Digital Theater
Systems, Inc. Copyright 1996, 2000 Digital Theater Systems,
Inc. All rights reserved.
Before Use
Title (DVD only)
The main film content, accompanying feature content,
additional feature content, or music album.
Each title is assigned a title reference number enabling
you to locate it easily.
DVD
(8 cm / 12 cm disc)
Audio CD
(8 cm / 12 cm disc)
In addition, this unit can play a DVD-RW, DVD+RW,
Kodak PICTURE CD, CD-R or CD-RW that contains
audio titles, MP3, WMA, or JPEG files.
otes
– Depending on the conditions of the recording equipment or the CD-R/RW (or DVD-RW, DVD+RW) disc
itself, some CD-R/RW (or DVD-RW, DVD+RW) discs
cannot be played on the unit.
– Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
– Do not use irregularly shaped CDs (e.g., heart-shaped
or octagonal). It may result in malfunctions.
Chapter (DVD only)
Sections of a picture or a musical piece that are smaller
than titles. A title can be composed of only one or
several chapters. Each chapter is assigned a chapter
number, enabling you to locate the chapter you want.
Depending on the disc, chapters may not be recorded.
Track (Audio CD only)
Sections of a picture or a musical piece on an audio
CD. Each track is assigned a track number, enabling
you to locate the track you want.
otes on DVDs
Some playback operations for DVDs may be intentionally fixed by the software manufacturer. As this unit plays
DVDs according to disc content designed by the software manufacturer, some playback features of the unit
may not be available or other functions may be added.
Make sure to also refer to the instructions supplied with
the DVDs. Some DVDs made for business purposes
may not be able to be played on the unit.
Regional code of the DVD/CD player and DVDs
This DVD/CD player is designed and manufactured for
playback of region “1” encoded DVD software.
The region code on the labels of some DVDs
indicates which type of player can play those
discs. This unit can only play DVDs labeled “1”
or “ALL”. If you try to play any other discs, the message
“Check Regional Code” will appear on the TV screen.
Some DVDs that have no region code label may still be
subject to area restrictions and therefore not playable.
1
5
INTRODUCTION
Disc-related terms
Playable Discs
Before Use (Continued)
Precautions
Handling the unit
Shipping the unit
Use the original shipping carton and packing materials
may come in handy. For maximum protection, re-pack
the unit as it was originally packed at the factory.
Setting up the unit
The picture and sound of a nearby TV, VCR, or radio
may be affected during DVD playback. In this case,
position the unit away from the TV, VCR, or radio, or
remov the disc and turn off the unit.
Keepping the exterior surfaces clean
Do not use volatile liquids, such as insecticide spray,
near the unit. Do not leave rubber or plastic products in
contact with the unit for a long period of time. They will
leave marks on the surface.
Storing discs
After playing, store the disc in its case.
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sunlight, as there may be a considerable temperature
increase inside the car.
Cleaning discs
Fingerprints and dust on the disc can distort the picture
or reduce sound quality. Before playing, clean the disc
with a clean cloth. Wipe the disc from the centre outwards.
YES
NO
Cleaning the unit
To clean the cabinet
Use a soft, dry cloth. If the surfaces are extremely dirty,
use a soft cloth lightly moistened with a mild detergent
solution. Do not use strong solvents such as alcohol,
benzene, or thinner, as these might damage the surface
of the unit.
To obtain a clear picture
The DVD/CD player is a high-tech, precision device. If
the optical pick-up lens and disc drive parts are dirty or
worn, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
For details, please contact your nearest dealer.
Notes on Discs
Disc Handling
Do not touch the playback side of the disc.
Hold the disc by the edges so that fingerprints will not
get on the surface.
Do not stick paper or tape on the disc.
6
Do not use strong solvents such as alcohol, benzene,
thinner, commercially available cleaners, or anti-static
spray intended for vinyl records.
About Symbols
About the
symbol display
“
” may appear on the TV screen during operation.
This icon means the function explained in this owner’s
manual is not available on that specific DVD video disc.
About the disc symbols for instructions
A section whose title has one of the following symbol is
applicable only to the disc represented by the symbol.
DVD
DVD
CD
Audio CDs.
MP3 MP3 disc.
WMA WMA disc.
JPEG JPEG files on a disc.
Front Panel Controls/ Display Window Indicators
VOLUME
controller
OPEN/CLOSE
STANDBY indicator
Lights red when the receiver
is in Standby mode (off).
FUNCTION/
PLAY
DISPLAY
Window
DISC Tray
INTRODUCTION
STANDBY/ON
Remote
sensor
MONO/STEREO/
PAUSE/STEP
MEMORY/STOP
TUNING (DOWN/UP)/
SKIP/SCAN
Indicates current
surround mode
Indicates current
audio stream
MEMORY
indicator
PHONES
connector
Indicates current chapter
or track number
Indicates current
player function:
Playback, Pause, etc.
Programmed
playback active
Repeat playback
mode indicators
TUNED indicator
STEREO indicator
Indicates current title number
MUTE indicator
ANGLE active
SLEEP indicator
Total playing time/Elapsed time/
Frequency/Sleep time/Surround
mode/Volume etc. indicators
DVD DVD disc loaded
MP3 MP3 disc loaded
7
Remote Control Buttons
POWER
OPEN/CLOSE (p. 20)
FUNCTION SELECTOR
You can also select the desired
function with the FUNC./PLAY on
the front panel.
Press and hold down this button
about 3 seconds, then press
repeatedly to select other function.
NUMBER
SLEEP (p. 29)
SUBTITLE (p. 22)
PRO LOGIC II (p. 15)
AUDIO (p. 15)
SOUND (p. 15)
SETUP (p. 17)
RETURN (p. 23)
DISPLAY (p. 16)
ENTER
ARROW
For use in highlighting a selection
on a GUI menu screen, TITLE and
MENU screen.
MENU (p. 22)
Use the MENU button to display
the menu screen included on DVD
video discs.
TITLE (p. 22)
Use the TITLE button to
display the title screen included
on DVD video discs.
Q / R)
SLOW SCAN (Q
(p. 21)
VOLUME (+/-)
PRESET(+/-) (p. 28)
STOP
PAUSE/STEP (p. 20)
PLAY
MARKER(p.
SEARCH (p.
ANGLE (p.
ZOOM (p.
22)
22)
22)
22)
Remote Control Operation Range
Point the remote control at the remote sensor and press
the buttons.
Distance: About 23 ft (7 m) from the front of the
remote sensor
Angle: About 30° in each direction in front of the remote
sensor
SKIP/SCAN (
/
) (p. 20)
MUTE (p. 29)
PROGRAM (p. 26)
CLEAR (p. 22)
REPEAT (p. 21, 24)
REPEAT A-B (p. 21, 24)
DIMMER (p. 29)
Remote control battery installation
Remove the battery cover on the rear
of the remote control, and insert two
R03 (size AAA) batteries with
and
aligned correctly.
Caution
Do not mix old and new batteries. Never mix different
types of batteries (standard, alkaline, etc.).
8
INTRODUCTION
Rear Panel Connections
Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
9
Connections
TV Connections
Make one of the following connections, depending on
the capabilities of your existing equipment.
ips
Depending on your TV and other equipment you wish
to connect, there are various ways you could connect
the DVD/CD player. Use one of the connections
described below.
Please refer to the manuals of your TV, VCR, Stereo
System or other devices as necessary to make the
best connections.
Caution
– Make sure the DVD/CD player is connected directly to
the TV. Select the correct AV input on your TV.
– Do not connect your DVD/CD player to TV via your
VCR. The DVD image could be distorted by the copy
protection system.
Video connection
Progressive Scan (ColorStream® pro) connection
If your television is a high-definition or “digital ready”
television, you may take advantage of the DVD/CD
player’s progressive scan output for the highest video
resolution possible.
If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try
Progressive Scan on the DVD/CD player.
Connect the COMPONENT VIDEO OUT/ PROGRESSIVE
SCAN jacks from the DVD/CD player to the corresponding in jacks on the TV using an optional Y Pb Pr cable
(C).
ote
– Set the Progressive to “On” on the Setup menu for
progressive signal, see page 17.
Rear of TV
Connect the MONITOR OUT jack from the DVD/CD
player to the video in jack on the TV using the video
cable supplied (V).
COMPONENT VIDEO /
PROGRESSIVE SCAN INPUT
Y
Pb
VIDEO
INPUT
S-VIDEO
INPUT
Pr
L
S-Video connection
Connect the S-VIDEO OUT jack on the DVD/CD player
to the S-Video in jack on the TV using the S-Video
cable (S).
V
S
C
Component Video (Color Stream ) connection
®
Connect the COMPONENT VIDEO OUT/PROGRESSIVE
SCAN jacks from the DVD/CD player to the corresponding in jacks on the TV using an Y Pb Pr cable (C).
COMPONENT
VIDEO OUT
S/VIDEO OUT
MONITOR OUT
PROGRESSIVE
SCAN
Rear of DVD/CD player
10
Connections (Continued)
PREPARATION
External Equipment Connections
Rear of VCR (or LD player, etc)
AUDIO OUTPUT
L
VIDEO
OUTPUT
R
COMPONENT
VIDEO OUT
S/VIDEO OUT
MONITOR OUT
PROGRESSIVE
SCAN
Connection
Connect the AUX IN (L/R) jacks on the DVD/CD
receiver to the AUDIO OUT (L/R) jacks on the VCR,
LD player, etc using the audio cables.
ip
Press AUX on the remote control to select input to these
jacks.
AUX appears on the Display Window.
11
Connections
AM-FM Antenna Connections
Connect the supplied FM/AM antennas for listening to the radio.
Connect the AM loop antenna to the AM antenna terminals.
Connect he FM wire antenna to the FM antenna terminals.
FM Wire aerial (supplied)
AM Loop aerial (supplied)
COMPONENT
VIDEO OUT
S/VIDEO OUT
MONITOR OUT
PROGRESSIVE
SCAN
otes
To prevent noise pickup, keep the AM loop antenna away from the DVD/CD receiver and other components.
Be sure to fully extend the FM wire antenna.
After connecting the FM wire antenna, keep it as horizontal as possible.
12
Front speaker
(Right)
PREPARATION
Connections (Continued)
Front speaker
(Left)
Center speaker
COMPONENT
VIDEO OUT
S/VIDEO OUT
MONITOR OUT
PROGRESSIVE
SCAN
Rear speaker
(Right surround)
Subwoofer
Rear speaker
(Left surround)
13
Connections (Continued)
14
Pre-Operation
Allows you to enjoy 5.1(or 6) discrete channels of high-quality
digital audio from DTS program sources such as discs, DVD
and compact discs, etc. bearing the trademark. DTS Digital
Surround delivers up to 6 channels of transparent audio (which
means identical to the original masters) and results in exceptional clarity throughout a true 360 degree sound field. The
term DTS is a trademark of DTS Technology, LLC.
Manufactured under license from DTS Technology, LLC.
The Dolby Digital surround format lets you enjoy up to 5.1
channels of digital surround sound from a Dolby Digital program source. If you play DVDs with “
” mark, you can
enjoy even better sound quality, greater spatial accuracy, and
improved dynamic range.
Sound Mode
You can enjoy surround sound simply by selecting one
of the pre-programmed sound fields according to the
program you want to listen to.
A) Using the SOUND button
Each time you press the SOUND button, the sound
mode changes in the following order;
PRO LOGIC → PLII MOVIE → PLII MUSIC →
PLII MATRIX → ROCK → POP → LIVE → DANCE → TECHNO → CLASSIC → SOFT → 3D SURROUND → BYPASS ...
Use this mode when playing movie or Dolby Digital 2 channel
which carries the “
” mark. This mode provides the effect
of being in a movie theater or live concert house - an effect with
an intensity which can only be obtained through DOLBY PRO
LOGIC SURROUND. The effect of the front/back/left/right
movement of the sound image, as well as the sense of fixed
position in the sound image, is much clearer and more dynamic than before.
(II)
Dolby Pro Logic II creates five full-bandwidth output channels
from two-channel sources. This is done using an advanced,
high-purity matrix surround decoder that extracts the spatial
properties of the original recording without adding any new
sounds or tonal colorations.
MOVIE Mode:
The Movie mode is for use with stereo television shows and all
programs encoded in Dolby Surround. The result is enhanced
soundfield directionality that approaches the quality of discrete
5.1-channel sound.
ips
ROCK: Reproduces the acoustics of rock music.
POP: Reproduces the acoustics of pop music.
LIVE: Reproduces the acoustics of a 300-seat live.
DANCE: Reproduces the acoustics of dance music.
TECHNO: Reproduces the acoustics of techno
music.
CLASSIC: Reproduces the acoustics of orchestral
music.
SOFT: Ideal for soft acoustic sounds.
B) Using the
Each time you press the
PL II button, the sound
mode changes in the following order;
PRO LOGIC → PLII MOVIE → PLII MUSIC →
PLII MATRIX → BYPASS ...
(This function is availabe for 2-channel mode only)
When a DVD is inserted.
You can change the sound mode of DVD (Dolby Digital, DTS,
PRO LOGIC, etc.) by pressing the AUDIO button repeatedly
on the remote during playback.
Although the DVD contents differ from disc -to-disc, the following explains the basic operation when this feature is used.
Each time you press AUDIO button, the sound mode of DVD is
changed as the following order;
→
MUSIC Mode:
The Music mode is for use with any stereo music recordings.
MATRIX Mode:
The Matrix mode is the same as the Music mode except that the
directional enhancement logic is turned off. It may be used to
enhance mono signals by making them seem “larger.” The
Matrix mode may also find use in auto systems, where the fluctuations from poor FM stereo reception can otherwise cause disturbing surround signals from a logic decoder. The ultimate
“cure” for poor FM stereo reception may be simply to force the
audio to mono.
3D SURROUND
This unit can produce a 3D Surround effect, using 3D Surround
Sound technology, which simulates multi-channel audio playback from two conventional stereo speakers instead of the five
or more speakers normally required to listen to multi-channel
audio from a home theatre. This feature works with DVD discs
encoded with Dolby Pro Logic and Dolby Digital audio tracks.
BYPASS
Software with multichannel surround audio signals is played
according to the way it was recorded.
PL II button
→
→
For your reference
• The DVD/CD player memorizes the last mode
settings for each source individually.
• You can identify the encoding format of program
software by looking at its packaging.
- Dolby Digital discs are labeled with the
logo.
- Dolby Surround encoded programs are labeled with
the
logo.
- DTS Digital Surround discs are marked with DTS.
otes
When you play sound tracks with 96kHz sampling frequency, the output signals will be converted to 48kHz (sampling
frequency).
Sound Mode is not functional if a headphone is used.
15
PRE-OPARATION
Mini Glossary for Audio Stream &
Surround mode
Pre-Operation (Continued)
DVD/CD player Overview
Playback Status Displays
This manual gives basic instructions for operating the
DVD/CD player. Some DVDs require specific operation
or allow only limited operation during playback. When
this occurs, the symbol
appears on the TV screen,
indicating that the operation is not permitted by the
DVD/CD player or is not available on the disc.
TITLE
CHAPT
Repeat Title
Repeat Chapter
A B
Repeat A-B
OFF
Repeat Off
Resume play from this point
Action prohibited or not available
On-Screen Displays
General playback status can be displayed on the TV
screen. Some menu options can be changed on the
menu.
On-screen display operation
otes
Some discs may not provide all of the features on the
on-screen display example shown below.
If no button is pressed for 10 seconds, the on-screen
display disappears.
1 Press DISPLAY during playback.
3/4
4 to select a menu option.
2 Use
The selected option will be highlighted.
1/2
2 to change the setting of a option.
3 Use
The number buttons can be also be used for setting
numbers (e.g., title number). For some functions,
press ENTER to execute the setting.
DVD
Menu Options
4 to select desired option)
Function (Use 3/4
Title Number
Chapter Number
Time search
16
1 /12
Shows the current chapter number and total number of
chapters, and skips to the desired chapter number.
1 ENG
D
5.1 CH
ABC
Sound
Shows the current title number and total number of
titles, and skips to the desired title number.
0:20:09
Audio language
and Digital Audio
Output mode
Subtitle language
Angle
1 /3
OFF
1 /1
BYPASS
Shows the elapsed playing time, and
searches the point directly from the elapsed time.
Shows the current audio soundtrack language,
encoding method, and channel number, and
changes the setting.
Shows the current subtitles language, and
changes the setting.
Selection Method
1 / 2, or
Numbers, ENTER
1 / 2, or
Numbers, ENTER, SKIP
Numbers, ENTER
1 / 2, or
AUDIO
1 / 2, or
SUBTITLE
Shows the current angle number and total number of
angles, and changes the angle number.
1 / 2, or
ANGLE
Shows the current sound mode, and
changes the setting.
1 / 2, or
SOUND
PRE-OPARATION
Pre-Operation (Continued)
Speaker Setup
5.1 Speaker settings
Auto Play
DVD
Select speaker settings, including volume balance and
delay time, or test the speaker settings.
Speaker settings are only active on the Analog MultiChannel Output. (See “Speaker Setup”, on page 27.)
DVD
You can set up the DVD/CD player so a DVD disc automatically starts playing whenever a DVD is inserted.
If Auto Play mode is set to On, this DVD/CD player will
search a title that playback time is longest and then play
back the title automatically.
On: Auto Play function is active.
Off: Auto Play function is not active.
Disc Audio
Disc Subtitle
Disc Menu
R
Rating
Front L
Country Code
Volume
TV Aspect
Menu Language
Progressive Scan
Size
Distance
R
0 dB
Small
1 ft
Test
Return
5.1 Speaker Setup
Others
Others
DRC, Vocal and Auto Play settings are adjustable.
4 to select the desired menu option and press
Use 3/4
ENTER. The setting of the selected menu option is
switched between On and Off.
Disc Audio
DRC
Disc Subtitle
Vocal
On
Disc Menu
Auto Play
Off
On
Rating
Country Code
TV Aspect
Menu Language
Progressive Scan
5.1 Speaker Setup
Others
Dynamic Range Control (DRC)
With the DVD format, you can hear a program’s soundtrack in the most accurate and realistic presentation
possible, thanks to digital audio technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
and the quietest ones). Then, you may listen to a movie
at a lower volume without losing clarity of sound. Set
DRC to On for this effect.
Vocal
Set Vocal to On only when a multi-channel karaoke
DVD is playing. The karaoke channels on the disc will
mix into normal stereo sound.
18
ote
The Auto Play function may not work for some DVDs.
Pre-Operation (Continued)
Parental Control
Country Code
Rating
Enter the code of a country/area whose standards were
used to rate the DVD video disc, referring to the list
(See “Country Code List”, page 31.).
Movies on DVDs may contain scenes not suitable for
children. Therefore, discs may contain Parental Control
information that applies to the complete disc or to
certain scenes on the disc. These scenes are rated
from 1 to 8, and alternatively, more suitable scenes are
available for selection on some discs. Ratings are
country-dependent. The Parental Control feature allows
you to prevent discs from being played by your children
or to have certain discs played with alternative scenes.
Disc Audio
8
Disc Subtitle
7
Disc Menu
6
Rating
Country Code
5
TV Aspect
Menu Language
Progressive Scan
3
4
2
1
Unlock
5.1 Speaker Setup
Change
Others
“Rating” on the Setup menu using the
1 Select
3/4
4 buttons.
2 While “Rating” is selected, press 2.
you have not entered a password.
3 When
Enter a 4-digit password using the number buttons
to create a personal 4-digit security password. then
press ENTER. Enter the 4-digit password again and
press ENTER to verify.
When you have already registered a password;
Enter a 4-digit password using the numbered buttons to confirm the personal 4-digit security password, then press ENTER.
If you make a mistake before pressing ENTER, press
CLEAR and enter 4-digit security password again.
4 butSelect a rating from 1 to 8 using the 3/4
4 tons.
One (1) has the least playback restrictions.
Eight (8) has the most playback restrictions.
Unlock: If you select Unlock, Parental Control is
not active. The disc will play in full.
Ratings 1 to 8: Some discs contain scenes not
suitable for children. If you set a rating for the player, all disc scenes with the same rating or lower will
be played. Higher rated scenes will not be played
unless an alternative scene is available on the disc.
The alternative must have the same rating or a
lower one. If no suitable alternative is found, playback will stop. You must enter the 4-digit password
or change the rating level in order to play the disc.
5
Press ENTER to confirm your rating selection,
then press SETUP to exit the menu.
Disc Audio
Code Set
Disc Subtitle
U S
Disc Menu
Rating
Country Code
TV Aspect
Menu Language
Progressive Scan
5.1 Speaker Setup
Others
4 buttons on
Select Country Code using the 3/4
1 the
Setup menu.
2 While Country Code is selected, press 2.
3 Follow step 3 of “Rating” on left.
4 Select the first character using the 3/44 buttons.
the cursor using 2 button and select the
5 Shift
4 buttons.
second character using 3/4
Press ENTER to confirm your Country Code
6 selection, then press SETUP to exit the menu.
ote
Confirmation of the 4-digit password is necessary when
the code is changed (see “Changing the 4-digit code”
below.).
Changing the 4-digit code
1 Follow Steps 1-2 as shown above to the left (Rating).
2 Enter the old code, then press ENTER.
4 buttons then press
3 Select Change using 3/4
ENTER.
4 Enter the new 4-digit code, then press ENTER.
5 Enter exactly the same code a second time and verify by pressing ENTER.
6 Press SETUP to exit the menu.
If you forget your 4-digit code
If you forgot your password, to clear the current password, follow the procedure below.
1 Press SETUP to display the Setup menu.
2 Use the Number buttons to enter the 6-digit number
“210499”.
The 4-digit password is cleared.
3 Enter a new code as shown above to the left
(Rating).
ote
This function may not work for some DVDs.
19
PRE-OPARATION
DVD
DVD
DVD Operation
DVD Playback
Playback Setup
General Features
DVD
Turn on the TV and select the video input source connected to the DVD/CD player.
Audio system: Turn on the audio system and select
the input source connected to the DVD/CD player.
1 Press OPEN/CLOSE to open the disc tray.
your chosen disc in the tray, with the
2 Load
playback side facing down.
OPEN/CLOSE to close the tray.
3 Press
READING appears on the TV screen, and playback
starts automatically. If playback does not start,
press PLAY.
In some cases, the disc menu might appear
instead.
If a menu screen is displayed
The menu screen may be displayed first after loading a
DVD which offers a menu.
DVD
Use the 1 234 buttons to select the title/chapter you
want to view, then press ENTER to start playback.
Press TITLE or MENU to return to menu display.
otes
– If Parental Control is set and the disc is not within the
Rating settings (not authorized), the 4-digit code must
be entered and/or the disc must be authorized (see
“Parental Control”, on page 19).
– DVDs may have a regional code.
Your receiver will not play discs that have a regional
code different from your receiver. The regional code
for this receiver is 1 (one).
ote
Unless stated otherwise, all operations described use
the remote control. Some features may also be
available on the Setup menu.
TITLE Selection
DVD-V
1 /3
When a disc has more than one title/group, you can
move to another title as follows:
Press DISPLAY, then use the appropriate number
button (0-9) to select a title/group number.
CHAPTER/TRACK Selection
1 /12
DVD
1 /3
When a title on a disc has more than one chapter or a
disc has more than one track, you can move to another
chapter/track as follows:
Press SKIP/SCAN . or > briefly during
playback to select the next chapter/track or to return to the
beginning of the current chapter/track.
Press . twice briefly to step back to the previous chapter/group/track.
To go directly to any chapter during DVD playback, press
4 to select the
DISPLAY. Then, press 3/4
chapter/group/track icon. Then, enter the chapter/track
number using the numbered buttons (0-9).
ote
For two-digit numbers, press the numbered buttons
(0-9)in rapid succession.
Search
DVD
1 Press and hold SKIP/SCAN . or > for about
two seconds during playback.
The receiver will now go into SEARCH mode.
2 Press and hold SKIP/SCAN . or > repeatedly
to select the required speed: mX2, mX4, mX16,
mX100 (backward) or MX2, MX4, MX16,
MX100 (forward).
3 To return to normal play, press PLAY.
Pause
DVD
1 Press PAUSE/STEP during playback.
2 To return to playback, press PLAY.
20
DVD Operation (Continued)
Still Picture and Frame-by-Frame playback
DVD
1. Press PAUSE/STEP during playback.
The DVD/CD player will now go into PAUSE mode.
2. You can advance the picture frame-by-frame by
pressing PAUSE/STEP repeatedly on the remote control.
3. To return to normal playback, press PLAY.
Slow Motion
DVD-V
1. Press SLOW SCAN - m or M + during playback.
The receiver will enter SLOW mode.
2. Use the SLOW SCAN - m or M + to select the
required speed: t 1/16, t 1/8, t 1/4 or t 1/2
(backward), or
T 1/16, T 1/8, T 1/4 or T 1/2 (forward).
3. To exit slow motion mode, press PLAY
Repeat A-B
A *
A B
Time Search
DVD
0:20:09
-:--:--
The Time Search function allows you to start playing at
any chosen time on the disc.
1.Press DISPLAY during playback. The on-screen display appears on the screen.
The Time Search box shows the elapsed playing time of the
current disc.
4 to select the Time
2. Within 10 seconds, use 3/4
Search icon in the on-screen display.
The “-:--:--” appears in the Time Search box.
3. Within 10 seconds, use the number buttons to enter
the required start time. Enter hours, minutes, and seconds from left to right in the box.
If you enter the wrong numbers, press CLEAR to remove the
numbers you entered. Then enter the correct numbers.
4. Within 10 seconds, press ENTER to confirm the start
time.
Playback starts from the selected time on the disc. If you enter
an invalid time, playback will continue from the current point.
DVD
OFF
To repeat a sequence in a title or group:
1. Press REPEAT A-B at your chosen starting point.
“ A * ” appears briefly on the TV screen.
2. Press REPEAT A-B again at your chosen ending
point.
“A B” appears briefly on the TV screen, and the repeat
sequence begins (“AsB” appears the display window).
3. To cancel the sequence, press REPEAT A-B.
Repeat
CHAPT
DVD
TITLE
OFF
DVD Video Discs - Repeat Chapter/Title/Off
1. To repeat the currently playing chapter, press
REPEAT.
The Repeat Chapter icon appears on the TV screen.
2. To repeat the title currently playing, press REPEAT a
second time.
The Repeat Title icon appears on the TV screen.
3. To exit Repeat mode, press REPEAT a third time.
The Repeat Off icon appears on the TV screen.
21
OPERATION
General Features (continued)
DVD Operation (Continued)
General Features (continued)
3. Press CLEAR.
3D Surround
4. Repeat steps 2 and 3 to erase additional Marker
numbers.
5. To remove the MARKER SEARCH menu, press
SEARCH.
BYPASS
DVD
3D SUR
This unit can produce a 3D Surround effect, which
simulates multi-channel audio playback from two
conventional stereo speakers, instead of the five or
more speakers normally required to listen to multichannel audio from a home theater system.
1. Press SOUND MODE to select “3D SUR” during playback.
2. To turn off the 3D Surround effect, press SOUND
MODE again to select “BYPASS”.
Zoom
DVD
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
1. Press ZOOM during playback or still playback to activate the Zoom function.
The Marker number will be erased from the list.
Special DVD Features
Checking the contents of DVD Video
discs: Menus
DVDs may offer menus that allow you to access special
features. To use the disc menu, press MENU. Then,
press the appropriate number button to select an option.
Or, use the 1 234 buttons to highlight your selection,
then press ENTER.
Title Menu
3. Press CLEAR to resume normal playback or return to
the paused image.
If the current title has a menu, the menu will appear on the
screen. Otherwise, the disc menu may appear.
2. The menu can list camera angles, spoken language
and subtitle options, and chapters for the title.
3. To remove the title menu, press TITLE again.
Disc Menu
ote
The zoom function may not work on some DVDs.
DVD
1. Press TITLE.
If you press ZOOM repeatedly, the magnification level
increases up to six steps.
2. Use the 1 234 buttons to move through the zoomed
picture.
DVD
DVD
1. Press MENU.
The disc menu is displayed.
2. To remove the disc menu, press MENU again.
Marker Search
1/9
DVD
MARKER SEARCH
You can start playback from a memorized point. Up to
nine points can be memorized.
To enter a mark, follow these steps.
1. During disc playback, press MARKER when
playback reaches the spot that you want to
memorize.
The Marker icon will appear on the TV screen briefly.
Camera Angle
If the disc contains scenes recorded at different camera
angles, you can change to a different camera angle
during playback.
Press ANGLE repeatedly during playback to select a
desired angle.
The number of the current angle appears on the display.
Changing the Audio Language
2. Repeat Step 1 to enter up to nine Marker points on a
disc.
To Recall Marked Scenes
1. During disc playback, press SEARCH.
The MARKER SEARCH menu will appear on the screen.
2. Within 10 seconds, use 1/2 to select the Marker
number that you want to recall.
3. Press ENTER.
Playback will start from the Marked scene.
4.To remove the MARKER SEARCH menu, press
SEARCH.
DVD-V
2. Use 1/2 to select the Marker number that you want
to erase.
22
DVD
1
PPCM
5 CH
1 ENG
D
5.1 CH
Press AUDIO repeatedly during playback to hear a different audio language or audio track.
Changing the Audio Channel
Press AUDIO repeatedly during playback to hear a
different audio channel (STER., LEFT or RIGHT).
Subtitles
DVD
ABC
1 ENG
Press SUBTITLE repeatedly during playback to see the
different subtitle languages available.
To Clear a Marked Scene
1. During disc playback, press SEARCH.
The MARKER SEARCH menu will appear on the screen.
1 /1
DVD
If
ote
appears, the feature is not available on the disc.
Audio CD and MP3/WMA Disc Operation
Playing Audio CD or MP3/WMA Discs
MP3
About MP3
WMA
The DVD/CD player can play MP3/WMA formatted
recordings on CD-ROM, CD-R, or CD-RW discs.
Before playing MP3/WMA recordings, read the notes on
MP3/WMA Recordings on right.
1
Insert a disc and close the tray.
Audio CD: Audio CD menu appears on the TV
screen go to step 4.
MP3/WMA disc: The MP3/WMA-JPEG choice
menu appears on the TV screen. Go to step 2
MP3 WMA
JPEG
Press RETURN to move to the MP3/WMA-JPEG
choice menu.
Program
Folder1
Folder2
Folder3
Folder4
Folder5
Folder6
Folder7
Folder8
00:00
Clear All
OFF
3/4
4 to select a folder, and ENTER.
3 Use
A list of files in the folder appears.
3/4
4 to select a track then press PLAY or
4 Use
ENTER.
Playback starts.
During playback, the current track’s elapsed playing
time will appear on the display window and menu.
Playback will stop at the end of the disc.
Press TITLE to move to the next page.
Press MENU to move to the previous page.
Program
CD
Program
MP3 WMA
TRACK01
TRACK02
TRACK03
TRACK04
TRACK05
TRACK06
TRACK07
Clear All
TRACK08
0: 56: 18
STER.
BYPASS
Audio CD Menu
An MP3 file is audio data compressed by using the
MPEG1 audio layer-3 file-coding scheme. We call
files that have the “.mp3” file extension “MP3 files”.
The player can not read an MP3 file that has a file
extension other than “.mp3”.
About WMA(Window Media Audio)
A WMA file is a Microsoft audio compression
technology.
WMA(Windows Media Audio) offers double the audio
compression of the MP3 format.
MP3/WMA Disc compatibility with this DVD/CD
player is limited as follows:
3/4
4 to select the MP3/WMA option then
2 Use
press ENTER.
The MP3/WMA menu appears on the TV screen.
MP3 WMA
TRACK 1
TRACK 2
TRACK 3
TRACK 4
TRACK 5
TRACK 6
TRACK 7
TRACK 8
00:00
Clear All
1
1. Sampling Frequency / only at 44.1kHz (MP3),
32 - 44.1kHz (WMA)
2. Bit rate / within 32 - 320kbps (MP3),
32 - 128kbps (WMA)
3. CD-R physical format should be “ISO 9660”
4. If you record MP3/WMA files using the software
which cannot create a FILE SYSTEM, for example
“Direct-CD” etc., it is impossible to playback
MP3/WMA files. We recommend that you use “EasyCD Creator”, which is the default in most software.
5. A single session disc requires MP3/WMA files in the
first track. If there is no MP3/WMA file in the 1st
track, it cannot playback MP3/WMA files. If you wish
to playback MP3/WMA files, format all the data in
the disc or use a new one.
6. File names should be named using 8 letters or less
and must incorporate “.mp3” or “.wma” extension
e.g. “********.MP3” or “********.WMA”.
7. Do not use special letters such as “/ : * ? “ < > ” etc.
8. Total number of files on the disc should be less than
650.
This DVD/CD player requires discs/recordings to meet
certain technical standards in order to achieve optimal
playback quality. Pre-recorded DVDs are automatically
set to these standards. There are many different types
of recordable disc formats (including CD-R containing
MP3 or WMA files). That require certain pre-existing
conditions (see above) to insure compatible playback.
OFF
MP3/WMA Menu
ip
If you are in a file list and want to return to the Folder
4 to highlight and press ENTER to return to
list, use 3/4
the previous menu screen.
Customers should also note that permission is
required in order to download MP3/WMA files and
music from the Internet. Our company has no right
to grant such permission. Permission should
always be sought from the copyright owner.
5 To stop playback at any other time, press STOP.
23
OPERATION
CD
Notes on MP3/WMA Recordings
Audio CD and MP3/WMA Disc Operation (Continued)
Pause
CD
MP3
Repeat A-B
WMA
CD
1. Press PAUSE/STEP during playback.
2. To return to playback, press PLAY or press
PAUSE/STEP again.
To repeat a sequence.
1. During disc playback, press REPEAT A-B at your
chosen start point.
Changing Tracks
2. Press REPEAT A-B again at your chosen end point.
The Repeat icon and “A * ” appears on the menu screen.
CD
MP3
WMA
Press SKIP/SCAN . or > briefly during
playback to go to the next track or to return to the
beginning of the current track.
Press SKIP/SCAN . twice briefly to step back to
the previous track.
For audio CDs, to go directly to any track, enter the
track number using the numbered buttons (0-9) during playback.
Repeat Track/All/Off
CD
MP3
WMA
1. To repeat the track currently playing, press REPEAT.
The Repeat icon and “TRACK” appear on the menu screen.
2. To repeat all tracks on a disc, press REPEAT a second time.
The Repeat icon and “ALL” appear on the menu screen.
3. To cancel Repeat mode, press REPEAT a third time.
The Repeat icon and “OFF” appear on the menu screen.
Search
CD
MP3
WMA
1. Press and hold SKIP/SCAN . or > for about
two seconds during playback.
The player will now go into SEARCH mode.
2. Press and hold SKIP/SCAN . or > repeatedly
to select the required speed: mX2, mX4, mX8
(backward) or MX2, MX4, MX8 (forward).
Search speed and direction are indicated on the menu
screen.
3. To exit SEARCH mode, press PLAY.
24
The Repeat icon and “A B” appear on the menu screen, and
the sequence begins to play repeatedly.
3. To exit the sequence and return to normal play, press
REPEAT A-B again.
The Repeat icon and “OFF” appear on the menu screen.
3D Surround
CD
This unit can produce a 3D Surround effect, which
simulates multi-channel audio playback from two
conventional stereo speakers, instead of the five or
more speakers normally required to listen to multichannel audio from a home theater system.
1. Use SOUND to select “3D SUR” during playback.
2. To turn off the 3D Surround effect, use SOUND to
select “BYPASS.”.
Changing Audio Channel
CD
Press AUDIO repeatedly during playback to hear a
different audio channel (STER., LEFT, or RIGHT).
JPEG FIle Operation
Changing Files
JPEG
This DVD/CD player can play discs with JPEG files and
Kodak picture CDs. Before viewing JPEG files, read the
notes on JPEG files on the right.
1
Insert a disc and close the tray.
The MP3/WMA-JPEG selection menu appears on
the TV screen.
Press SKIP/SCAN . or > once while viewing a
picture to advance to the next file or to the previous file.
Still Picture
1. Press PAUSE/STEP while viewing a slide show.
The DVD/CD player will now go into PAUSE mode.
2. To return to the slide show, press PLAY or press
PAUSE/STEP again.
MP3 WMA
Flipping the picture
JPEG
2
4 to select the JPEG option then press
Use 3/4
ENTER.
The JPEG menu appears on the TV screen.
4 while viewing a picture to flip the picture
Use 3/4
horizontally or a vertically.
Rotating the picture
JPEG
Use 1/2 while viewing a picture to rotate the picture
clockwise or counter clockwise.
Folder1
Folder2
Folder3
Folder4
Folder5
Folder6
Notes on JPEG Files
Folder7
Folder8
Slide Speed
3
Off
Depending upon the size and number of the JPEG
files, it could take a long time for the DVD/CD player
to read the disc’s contents. If you don’t see an onscreen display after several minutes, some of the files
are too big — reduce the resolution of the JPEG files
to less than 2 mega pixels and burn another disc.
Total number of files and folders on the disc should
be less than 650.
Some disc may be incompatible due to different
recording format or condition of disc.
Ensure that all the selected files have the “.jpg” extensions when copying into the CD layout.
If the files have “.jpe” or “.jpeg” extensions, please
rename them as “.jpg” files.
File names without “.jpg” extension will not be able to
be read by this DVD/CD player, even though the files
are shown as JPEG image files in windows explorer.
4 to select a folder, and ENTER.
Use 3/4
A list of files in the folder appears.
Press RETURN to move to the MP3/WMA-JPEG
selection menu.
Tip
If you are in a file list and want to return to the Folder
list, use the 34 buttons on the remote to highlight
“
” and press ENTER to return to the
previous menu screen.
4
4 to
If you want to view a particular file, use 3/4
highlight a file and press ENTER or PLAY.
Viewing the file starts.
While viewing a file, press RETURN to move to the
previous menu (JPEG menu).
Press TITLE to move to the next page.
Press MENU to move to the previous page.
JPEG
Folder1
Picture1
Picture2
Picture3
Picture4
Picture5
Picture6
Picture7
5/32
1024X768
Slide Speed
Off
5/32
1024X768
Picture5.jpg
ip
There are three viewing Slide Speed options: Fast,
Normal, Slow, and Off. Use 1/2 to highlight the Slide
Speed option then use 3/4 to select the option you
want to use, and press ENTER.
viewing at any other time, press STOP.
5 ToThestop
JPEG menu appears.
25
OPERATION
Viewing JPEG Files
Programmed Playback
CD
MP3
Audio CD and MP3/WMA Disc
Programmed Playback
WMA
Repeat Programmed Tracks
The Program function enables you to store your favorite
tracks from any disc in the player’s memory.
The Repeat icon and “TRACK” appear on the menu display.
Program can contain 30 tracks.
Press PROGRAM during playback or in the Stop
mode to enter the Program Edit mode.
The E mark will appear to the right of the word Program
on the right side of the menu display.
ote
Press PROGRAM to exit the Program Edit mode;
the E mark will disappear.
Program
TRACK 1
TRACK 12
TRACK 2
TRACK 8
TRACK 3
TRACK 10
TRACK 4
TRACK 3
E
TRACK 5
TRACK 6
TRACK 7
Clear All
TRACK 8
0: 56: 18
STER.
BYPASS
Audio CD menu
Program
MP3 WMA
E
TRACK 8
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
1
2
3
4
5
6
7
8
00:00
TRACK 2
TRACK 4
TRACK 3
Clear All
3
OFF
MP3/WMA menu
4 Press 2.
The programmed track you selected last is highlighted on
the program list.
3/4
4 to select the track you want to start
5 Use
playing.
Press TITLE to move to the next page.
Press MENU to move to the previous page.
6 Press PLAY to start.
Playback begins in the order in which you programmed
the tracks and “PROG.” appears on the menu display.
Playback stops after all of the tracks on the Program list
have played once.
7
To resume normal playback from programmed playback, select a track of CD (or
MP3/WMA) list and then press ENTER.
“PROG.” indicator disappears from the on the menu display.
26
To cancel Repeat mode, press REPEAT a third time.
The Repeat icon and “OFF” appear on the menu display.
Erasing a Track from the Program List
1. Press PROGRAM during playback (Audio CD and
MP3/WMA disc only) or in the stop mode to enter the
Program Edit mode.
The
a track, then press ENTER to place the
2 Select
selected track on the Program list.
step 2 to place additional tracks on the
3 Repeat
Program list.
CD
To repeat all tracks on the program list, press
REPEAT a second time.
The Repeat icon and “ALL” appear on the menu display.
1
To repeat the track currently playing, press REPEAT.
E
mark will appear.
2. Press 2 to move to the Program list.
4 to select the track that you wish to erase
3. Use 3/4
from the Program list.
4. Press CLEAR.
The track will be erased from the Program list.
Erasing the Complete Program List
1. Follow steps 1-2 of “Erasing a Track from Program
List” as above.
4 to select “Clear All”, then press ENTER.
2. Use 3/4
The complete Program for the disc will be erased.
The programs are also cleared when the disc is removed.
Additional Information
Adjust the following settings for the built-in 5.1 channel
surround decoder.
Disc Audio
Disc Subtitle
Disc Menu
R
Rating
Front L
Country Code
Volume
TV Aspect
Menu Language
Progressive Scan
Size
Distance
R
0 dB
Small
1 ft
Test
Last Condition Memory
DVD
CD
This DVD/CD player memorizes the user settings for
the last disc that you have viewed. Settings remain in
memory even if you remove the disc from the player or
switch off the player. If you load a disc that has its settings memorized, the latest stop position is automatically recalled.
Return
5.1 Speaker Setup
Others
“5.1 Speaker Setup” on the Setup menu
1 Select
4 buttons.
using the 3/4
“5.1 Speaker Setup” is selected, press 2
2 While
button.
3 Use 2 buttons to select the desired speaker.
4 Adjust options by using 341 2 buttons.
otes
– Settings are stored in memory for use any time.
– This player does not memorize settings of a disc if
you switch off the DVD/CD player before commencing
to play it.
Speaker selection
Select a speaker that you want to adjust. ((Front speakers (Left), Front speakers (Right), Center Speaker, Rear
speakers (Left), Rear speakers (Right), or Subwoofer))
Volume
Use 1 / 2 to adjust the output level of the selected
speaker. (-6dB ~ +6dB)
Size
Since the speaker settings are fixed, you cannot change
the settings.
Distance
If you connected speakers to your DVD/CD player , setting the Distance lets the speakers know how far the
sound has to travel to reach your listening point. This
allows the sound from each speaker to reach the listener at the same time. (1 ft = 30.48 cm)
ote
You can not set the distancefor the subwoofer speaker.
Test
Press ENTER to test the signals of each speaker.
Adjust the volume to match the volume of test signals
memorized in the system.
Front Left (L) → Centre → Front Right (R) →
Rear Right (R) → Rear Left (L) → Subwoofer
Return
Press ENTER to return to the previous menu.
27
OPERATION
Speaker Setup
Radio Operation
Presetting Radio stations
Listening to the radio
You can preset 50 stations for FM and AM (MW). Before
tuning, make sure that you have turned down the volume.
Preset radio stations in the DVD/CD player’s memory
first (see “Presetting radio stations” on the left).
Use BAND on the remote control to access FM
or AM (MW) in the display window.
1
Press BAND repeatedly until AM (MW) or FM
appears in the display window.
1
each time you press BAND, FM and
PRESET +/- repeatedly to select the pre2 Thereafter,
AM (MW) change alternately.
2 Press
set station you want.
and hold TUNING
or
on
3 Press
the front panel for about two seconds until the
the volume by rotating VOLUME on the
frequency indication starts to change, then
3 Adjust
front panel or by pressing VOLUME + or - on the
release.
remote control repeatedly.
The last received station is tuned in.
Each time you press the button, the DVD/CD player tunes
in one preset station at a time.
Scanning stops when the DVD/CD Receiver tunes in a
station. “TUNED” and “STEREO” (for stereo program)
appear in the display window.
ote
“TUNED” only appears when the signal is FM and
STEREO.
4 Press MEMORY on the front panel.
TUNING
or
on the front
5 Press
panel to select the preset number you want.
6 Press MEMORY on the front panel again.
7 Repeat steps 3 to 6 to store other stations.
To turn the radio Off
Press POWER to turn the DVD/CD player off or select
another function mode (CD/DVD or AUX).
To listen to non-preset radio stations
Use manual or automatic tuning in step 2.
For manual tuning, press TUNING
on the front panel repeatedly.
For automatic tuning, press and hold TUNING
or
for about two seconds on the front
panel.
A preset number will flash in the display window.
The station is stored.
To tune in a station with a weak signal
Press TUNING
or
to tune in the station manually.
repeatedly in step 3
To clear all the stored stations
Press and hold MEMORY for about two seconds.
“CLEAR ALL” is appears in the display window, then
press MEMORY again, the stations are cleared.
If you have accidentally entered into the "CLEAR
ALL" mode and you do not wish to clear the memory,
do not press any key. After a few seconds, the
"CLEAR ALL" display will go off by itself and change
to normal mode.
ote
If all stations have already been entered, the FULL
message will appear in the display window for a
moment and then a preset number will flash.
To change the preset number, follow the steps 5-6 as
above.
28
or
To select a preset radio station directly
You can use the number buttons on the remote control
to select a preset radio station directly.
For example, to listen to preset station 4, press 4 on the
remote control. To listen to preset station 19, press 1
then 9 (within 3 seconds).
For your reference
If a FM program is noisy
Press MONO/ST. repeatedly on the front panel so
that “STEREO” disappears from the display window.
There will be no stereo effect, but the reception will
improve. Press the button again to restore the stereo
effect.
To improve reception
Reorient the supplied antennas.
Sleep Timer Setup
Dimmer
You can set up the DVD/CD player to turn off automatically at a specified time.
This function changes the brightness of the display window on the front panel during power-on status.
Press DIMMER repeatedly.
1
Press SLEEP to set up a sleep time.
2
Each time you press SLEEP the setting changes
in the following order.
SLEEP 90 →80 → 70 → 60→ 50 → 40 → 30 → 20 →10 →
OFF
The SLEEP indicator and sleep time appears in the display window.
ote
You can check the time remaining before the
DVD/CD player turns off.
Press SLEEP. The remaining time appears in the
display window.
Mute
Press MUTE to remove the sound.
You can mute your unit in order, for example, to answer
the telephone, “MUTE” indicator flashes in the display
window.
Press MUTE again to restore the sound.
Using Headphones
Connect a stereo headphone plug ( 3.5mm) into the
PHONES input jack.
The speakers are automatically disconnected when you
plug in a headphone (not supplied).
29
OPERATION
Other Functions
Language Code List
Enter the appropriate code number for the initial setup “Disc Audio”, “Disc Subtitle” and/or “Disc Menu”
(See page 17).
Code
Language
Code
Language
Code
Language
Code
Language
6566
Abkhazian
7074
Fiji
7678
Lingala
8373
Singhalese
6565
Afar
7073
Finnish
7684
Lithuanian
8375
Slovak
6570
Afrikaans
7082
French
7775
Macedonian
8376
Slovenian
8381
Albanian
7089
Frisian
7771
Malagasy
8379
Somali
6577
Ameharic
7176
Galician
7783
Malay
6983
Spanish
6582
Arabic
7565
Georgian
7776
Malayalam
8385
Sudanese
7289
Armenian
6869
German
7784
Maltese
8387
Swahili
6583
Assamese
6976
Greek
7773
Maori
8386
Swedish
6588
Aymara
7576
Greenlandic
7782
Marathi
8476
Tagalog
6590
Azerbaijani
7178
Guarani
7779
Moldavian
8471
Tajik
6665
Bashkir
7185
Gujarati
7778
Mongolian
8465
Tamil
6985
Basque
7265
Hausa
7865
Nauru
8484
Tatar
6678
Bengali; Bangla
7387
Hebrew
7869
Nepali
8469
Telugu
6890
Bhutani
7273
Hindi
7879
Norwegian
8472
Thai
6672
Bihari
7285
Hungarian
7982
Oriya
6679
Tibetan
6682
Breton
7383
Icelandic
8065
Panjabi
8473
Tigrinya
6671
Bulgarian
7378
Indonesian
8083
Pashto, Pushto
8479
Tonga
7789
Burmese
7365
Interlingua
7065
Persian
8482
Turkish
6669
Byelorussian
7165
Irish
8076
Polish
8475
Turkmen
7577
Cambodian
7384
Italian
8084
Portuguese
8487
Twi
6765
Catalan
7465
Japanese
8185
Quechua
8575
Ukrainian
9072
Chinese
7487
Javanese
8277
Rhaeto-Romance
8582
Urdu
6779
Corsican
7578
Kannada
8279
Rumanian
8590
Uzbek
7282
Croatian
7583
Kashmiri
8285
Russian
8673
Vietnamese
6783
Czech
7575
Kazakh
8377
Samoan
8679
Volapük
6865
Danish
7589
Kirghiz
8365
Sanskrit
6789
Welsh
7876
Dutch
7579
Korean
7168
Scots Gaelic
8779
Wolof
6978
English
7585
Kurdish
8382
Serbian
8872
Xhosa
6979
Esperanto
7679
Laothian
8372
Serbo-Croatian
7473
Yiddish
6984
Estonian
7665
Latin
8378
Shona
8979
Yoruba
7079
Faroese
7686
Latvian, Lettish
8368
Sindhi
9085
Zulu
30
Country Code List
Code
AD
AE
AF
AG
AI
AL
AM
AN
AO
AQ
AR
AS
AT
AU
AW
AZ
BA
BB
BD
BE
BF
BG
BH
BI
BJ
BM
BN
BO
BR
BS
BT
BV
BW
BY
BZ
CA
CC
CF
CG
CH
CI
CK
CL
CM
CN
CO
CR
CS
CU
CV
CX
CY
CZ
DE
DJ
DK
DM
DO
DZ
EC
EE
EG
EH
Country
Andorra
United Arab Emirates
Afghanistan
Antigua and Barbuda
Anguilla
Albania
Armenia
Netherlands Antilles
Angola
Antarctica
Argentina
American Samoa
Austria
Australia
Aruba
Azerbaidjan
Bosnia-Herzegovina
Barbados
Bangladesh
Belgium
Burkina Faso
Bulgaria
Bahrain
Burundi
Benin
Bermuda
Brunei Darussalam
Bolivia
Brazil
Bahamas
Bhutan
Bouvet Island
Botswana
Belarus
Belize
Canada
Cocos (Keeling) Islands
Central African Republic
Congo
Switzerland
Ivory Coast
Cook Islands
Chile
Cameroon
China
Colombia
Costa Rica
Former Czechoslovakia
Cuba
Cape Verde
Christmas Island
Cyprus
Czech Republic
Germany
Djibouti
Denmark
Dominica
Dominican Republic
Algeria
Ecuador
Estonia
Egypt
Western Sahara
Code
ER
ES
ET
FI
FJ
FK
FM
FO
FR
FX
GA
GB
GD
GE
GF
GH
GI
GL
GM
GN
GP
GQ
GR
GS
GT
GU
GW
GY
HK
HM
HN
HR
HT
HU
ID
IE
IL
IN
IO
IQ
IR
IS
IT
JM
JO
JP
KE
KG
KH
KI
KM
KN
KP
KR
KW
KY
KZ
LA
LB
Country
Eritrea
Spain
Ethiopia
Finland
Fiji
Falkland Islands
Micronesia
Faroe Islands
France
France (European
Territory)
Gabon
Great Britain
Grenada
Georgia
French Guyana
Ghana
Gibraltar
Greenland
Gambia
Guinea
Guadeloupe (French)
Equatorial Guinea
Greece
S. Georgia & S. Sandwich
Isls.
Guatemala
Guam (USA)
Guinea Bissau
Guyana
Hong Kong
Heard and McDonald
Islands
Honduras
Croatia
Haiti
Hungary
Indonesia
Ireland
Israel
India
British Indian Ocean
Territory
Iraq
Iran
Iceland
Italy
Jamaica
Jordan
Japan
Kenya
Kyrgyzstan
Cambodia6
Kiribati
Comoros
Saint Kitts & Nevis Anguilla
North Korea
South Korea
Kuwait
Cayman Islands
Kazakhstan
Laos
Lebanon
Code
LC
LI
LK
LR
LS
LT
LU
LV
LY
MA
MC
MD
MG
MH
MK
ML
MM
MN
MO
MP
MQ
MR
MS
MT
MU
MV
MW
MX
MY
MZ
NA
NC
NE
NF
NG
NI
NL
NO
NP
NR
NU
NZ
OM
PA
PE
PF
PG
PH
PK
PL
PM
PN
PR
PT
PW
PY
QA
RE
RO
RU
RW
SA
SB
Country
Saint Lucia
Liechtenstein
Sri Lanka
Liberia
Lesotho
Lithuania
Luxembourg
Latvia
Libya
Morocco
Monaco
Moldavia
Madagascar
Marshall Islands
Macedonia
Mali
Myanmar
Mongolia
Macau
Northern Mariana Islands
Martinique (French)
Mauritania
Montserrat
Malta
Mauritius
Maldives
Malawi
Mexico
Malaysia
Mozambique
Namibia
New Caledonia (French)
Niger
Norfolk Island
Nigeria
Nicaragua
Netherlands
Norway
Nepal
Nauru
Niue
New Zealand
Oman
Panama
Peru
Polynesia (French)
Papua New Guinea
Philippines
Pakistan
Poland
Saint Pierre and Miquelon
Pitcairn Island
Puerto Rico
Portugal
Palau
Paraguay
Qatar
Reunion (French)
Romania
Russian Federation
Rwanda
Saudi Arabia
Solomon Islands
Code
SC
SD
SE
SG
SH
SI
SJ
SK
SL
SM
SN
SO
SR
ST
SU
SV
SY
SZ
TC
TD
TF
TG
TH
TJ
TK
TM
TN
TO
TP
TR
TT
TV
TW
TZ
UA
UG
UK
UM
US
UY
UZ
VA
VC
VE
VG
VI
VN
VU
WF
WS
YE
YT
YU
ZA
ZM
ZR
ZW
Country
Seychelles
Sudan
Sweden
Singapore
Saint Helena
Slovenia
Svalbard and Jan Mayen
Islands
Slovak Republic
Sierra Leone
San Marino
Senegal
Somalia
Suriname
Saint Tome and Principe
Former USSR
El Salvador
Syria
Swaziland
Turks and Caicos Islands
Chad
French Southern
Territories
Togo
Thailand
Tadjikistan
Tokelau
Turkmenistan
Tunisia
Tonga
East Timor
Turkey
Trinidad and Tobago
Tuvalu
Taiwan
Tanzania
Ukraine
Uganda
United Kingdom
USA Minor Outlying
Islands
United States
Uruguay
Uzbekistan
Vatican City State
Saint Vincent &
Grenadines
Venezuela
Virgin Islands (British)
Virgin Islands (USA)
Vietnam
Vanuatu
Wallis and Futuna Islands
Samoa
Yemen
Mayotte
Yugoslavia
South Africa
Zambia
Zaire
Zimbabwe
31
REFERENCE
Enter the appropriate code number for the initial setup “Country Code” (See page 19).
Troubleshooting
Check the following guide for the possible cause of a problem before contacting service.
Symptom
Cause
Possible Solution(s)
No power.
• The power cord is disconnected.
• Plug the power cord securely into the
wall power outlet.
The power is on, but
the DVD/CD player
does not work.
• No disc is inserted.
• Insert a disc. (Check that the DVD or,
audio CD indicator in the DVD display is
lit.)
No picture.
• The TV is not set to receive DVD signal
output.
• Select the appropriate video input mode
on the TV so the picture from the DVD/
CD receiver appears on the TV screen.
• The video cable is not connected
securely.
• Connect the video cable into the jacks
securely.
• The connected TV power is turned off.
• Turn on the TV.
• The equipment connected with the
audio cable is not set to receive DVD
signal output.
• Select the correct input mode of the
audio receiver so you can hear the
sound from the DVD/CD player.
• The audio cables are not connected
securely.
• Inseart the audio cables into the jacks
securely.
• The power of the equipment connected
with the audio cable is turned off.
• Turn on the equipment connected with
the audio cable.
• The audio connecting cable is damaged.
• Replace it with new one.
• The disc is dirty.
• Clean the disc.
There is no sound or
only a very low-level
sound is heard.
The playback picture is poor.
• No disc is inserted.
The DVD/CD player
does not start playback.
Loud hum or noise is
heard.
32
• Insert a disc. (Check that the DVD, or
audio CD indicator in the DVD display is
lit.)
• An unplayable disc is inserted.
• Insert a playable disc. (Check the disc
type, color system and Regional code.)
• The disc is placed upside down.
• Place the disc with the playback side
down.
• The disc is not placed within the guide.
• Place the disc on the disc tray correctly
inside the guide.
• The disc is dirty.
• Clean the disc.
• A menu is on the TV screen.
• Press the SETUP button to remove the
menu display.
• A parental control restriction is set.
• Cancel the estriction or change the
rating level.
• The plugs and jacks are dirty.
• Wipe them with a cloth slightly moistened with alcohol.
• The disc is dirty.
• Clean the disc.
• The speakers and components are
connected poorly.
• Connect the speakers and components
securely.
• The DVD/CD player is located too close
to the TV.
• Move your TV away from the audio
components.
Troubleshooting (Cont’d)
Radio stations cannot
be tuned in.
The remote control
does not work properly.
Cause
• The antenna is positioned or connected
poorly.
Possible Solution(s)
• Connect the antenna securely.
• Adjust the antennas and connect an
external antenna if necessary.
REFERENCE
Symptom
• The signal strength of the stations is too
weak (when tuning in with automatic
tuning).
• Tune in the station manually.
• No stations have been preset or preset
stations have been cleared (when
tuning by scanning preset stations).
• Preset the stations (page 28).
• The remote control is not pointed at the
remote sensor of the DVD/CD player.
• Point the remote control at the remote
sensor of the DVD/CD player.
• The remote control is too far from the
DVD/CD player.
• Use the remote control within about 23
ft (7 m).
• There is an obstacle in the path of the
remote control and the DVD/CD
receiver.
• Remove the obstacle.
• The batteries in the remote control are
exhausted.
• Replace the batteries with new ones.
The sound mode or Pro • The system cannot change while playing MP3 or WMA discs.
Logic II mode cannot
be changed.
• Eject disc, change mode, reinsert disc.
• Nothing is displayed on the front panel
display.
• Press DIMMER on the remote control.
The front panel display
is too dim.
33
Specification
[Supplied
Accessories]
[Speakers]
[Amplifier]
AM
[MW]
[Tuer]
[FM]
[Video]
[CD/DVD]
[General]
Power supply
Power consumption
Mass
External dimensions (W x H x D)
Operating conditions
Operating humidity
Laser
Signal system
Frequency response (audio)
Signal-to-noise ratio (audio)
Dynamic range (audio)
Harmonic distortion (audio)
Video output
S-video output
Tuning Range
Intermediate Frequency
Signal-to Noise Ratio
Frequency Response
Tuning Range
Intermediate Frequency
Stereo mode
Surround mode
(* Depending on the sound mode
settings and the source, there
may be no sound output.)
Outputs
Type
Impedance
Frequency Response
Sound Pressure Level
Rated Input Power
Max. Input Power
Net Dimensions (W x H x D)
Net Weight
Refer to main label
Refer to main label
8.4 lbs
14.1 x 2.9 x 12.3 inches
Temperature: 5°C to 35°C, Operation status: Horizontal
5% to 85%
Semiconductor laser, wavelength 650 nm
NTSC 525/60
200 Hz to 18 kHz
More than 70 dB (1 kHz, NOP, 20 kHz LPF/A-Filter)
More than 65 dB
1.0 % (1 kHz, at 12W position) (20 kHz LPF/A-Filter)
1.0 V (p-p), 75 Ω, negative sync., RCA jack
(Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin x 1
(C) 0.3 V (p-p), 75 Ω
87.5 - 108.0 MHz or 65.0 - 74.0 MHz, 87.5 - 108.0 MHz
10.7 MHz
55 dB (Mono)
180 - 10,000 Hz
522 - 1,611 kHz or 530 - 1,610 kHz
450 kHz
30W + 30W (6 Ω at 1 kHz, THD 10 %)
Front: 30W + 30W (THD 10 %)
Center*: 30W
Surround*: 30W + 30W (6Ω at 1 kHz, THD 10 %)
Subwoofer*: 50W (8Ω at 30 Hz, THD 10 %)
S-VIDEO
MONITOR
PHONES: (32 Ω, 20mW)
Satellite Speaker (LHS-D6245T)
Passive Subwoofer (LHS-D6245W)
1 Way 1 Speaker
6Ω
130 - 20,000 Hz
85 dB/W (1m)
30W
60W
3.5 x 5.5 x 3.9 inches
1.9 lbs
1 Way 1 Speaker
8Ω
50 - 1,500 Hz
82 dB/W (1m)
50W
100W
6.2 x 13.7 x 13.5 inches
9.9 lbs
• Speakers . . . . . . . . . . . . . . . . . . . . . . . . . . .6
• Remote control . . . . . . . . . . . . . . . . . . . . . .1
• AM loop antenna . . . . . . . . . . . . . . . . . . . . .1
• Speaker cables . . . . . . . . . . . . . . . . . . . . . .5
• Batteries (AAA) . . . . . . . . . . . . . . . . . . . . . . .2
• FM antenna . . . . . . . . . . . . . . . . . . . . . . . . .1
❋ Designs and specifications are subject to change without notice.
34
Notes
LG Electronics, Inc.
DVD/CD/Radio Combination Home Theater System DVT412
LIMITED WARRANTY – USA
LG will repair or replace your product, at LG’s option, if it proves to be defective in material or workmanship
under normal use, during the warranty period ("Warranty Period") listed below, effective from the date ("Date of
Purchase") of original purchase of the product. This limited warranty is good only to the original purchaser of the
product and effective only when used in the United States, excluding U.S. Territories.
WARRANTY PERIOD:
LABOR: 90 days from the Date of Purchase.
PARTS: 1 Year from the Date of Purchase.
* Parts replaced are warranted for the remaining
portion of the original warranty period.
HOW SERVICE IS HANDLED:
Carry-In Service: Please retain dealer’s dated bill of
sale or delivery ticket as evidence of the Date of
Purchase for proof of warranty, and submit a copy of
the bill of sale to the service person at the time
warranty service is provided.
Please call 1-877-993-6484 to locate your
nearest Authorized Service Center.
Or visit our website at
http://www.zenithservice.com
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING WITHOUT
LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
TO THE EXTENT ANY IMPLIED WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THE
EXPRESS WARRANTY PERIOD ABOVE. LG WILL NOT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNATIVE DAMAGES OF ANY NATURE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR PROFITS, LOST
OR CORRUPTED PROGRAMMING OR DATA, OR ANY OTHER DAMAGE WHETHER BASED IN CONTRACT,
TORT, OR OTHERWISE.
Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how
long an implied warranty lasts, so the above exclusion or limitation may not apply to you. This warranty gives
you specific legal rights and you may also have other rights that vary from state to state.
THIS LIMITED WARRANTY DOES NOT APPLY TO:
• Damage caused in shipping or transit
• Service required as a result of improper installation,
including incorrect or insufficient AC supply (Please
consult the owner’s manual for power supply
requirements)
• Installation or repair of other components in a video
system
• Set-up or adjustment on consumer controls, or
damage caused by improper adjustments
• Damage cause by other system components
• Damage (including cosmetic damage), failure, loss or
personal injury due to misuse, abuse, negligence,
improper maintenance or storage, or to acts of nature
or other causes beyond LG’s control (Causes beyond
LG’s control include but are not limited to lightning
strike, power surges, power outages, and water damage)
• Repair or replacement of warranted parts by other than
Authorized Service Centers
• Units purchased or serviced outside the coverage area
• Product where the original factory serial numbers have
been removed, defaced, or changed in any way
• Product sold and labeled as "as is, where is" or
similar disclaimer
The costs of repair or replacement under these excluded circumstances shall be borne by the consumer.
CUSTOMER INTER-ACTIVE CENTER NUMBERS:
For nearest Authorized Service
Center, Where to buy, Product
Assistance, or Customer Assistance
Call 1-877-993-6484 (24 hours a day, 365 days per year)
and select appropriate option from the menu.
Or visit our website at http://www.zenithservice.com
Marketed and Distributed by LG Electronics U.S.A., Inc.
1000 Sylvan Avenue, Englewood Cliffs, NJ.
GS# 3834RH0024G
Printed in China
Issue O