HANNspree Flat Panel Television DT04-12U1-000 User manual

HANNspree Flat Panel Television DT04-12U1-000 User manual
9.6" Liquid Crystal Display
12.1"
Television
User's Manual
MAK-000001
Table of Contents
1.
2.
3.
4.
5.
Regulatory Information ................................................... 3
Description of Warning Symbols ..................................... 5
Safety Notices ............................................................... 6
Preface ....................................................................... 13
Introducing the TV ....................................................... 15
Features .................................................................. 15
6. Checking Package Contents ......................................... 16
7. Getting Started ............................................................ 17
Control Panel .......................................................... 17
Input and Output Jacks ............................................ 18
Remote Control ....................................................... 19
Inserting the Remote Control Battery/Batteries .......... 21
8. Making Connections .................................................... 24
Connecting to an Antenna or Cable TV ..................... 24
Connecting to AV Devices ........................................ 25
Connecting to a VCR/VCD/DVD Player ................ 25
Connecting to a Video Camera ............................ 26
Connecting External Speakers or Headphones .......... 27
Connecting the Power Adapter ................................. 28
9. Using the TV ............................................................... 29
Using the Remote Control ........................................ 29
Turning the TV On and Off ....................................... 29
Selecting Channels .................................................. 29
Switching Source Signals ......................................... 29
Adjusting the Volume ............................................... 29
10. Adjusting On-Screen Display (OSD) Settings ................ 30
OSD Setting Menu ................................................... 30
Brightness ............................................................... 31
Contrast .................................................................. 32
Video Setting ........................................................... 33
Hue .................................................................... 34
Saturation ........................................................... 35
Sharpness .......................................................... 36
Color Temperature .............................................. 37
1
Table of Contents
Audio Setting ...........................................................
Treble .................................................................
Bass ...................................................................
Balance ..............................................................
Mute ...................................................................
TV Setting ...............................................................
TV/CATV ............................................................
MTS ...................................................................
Auto Program ......................................................
Manual Program ..................................................
Channel Add/Erase .............................................
Favorite Channel .................................................
Miscellaneous Setting ..............................................
Language ...........................................................
Sleeper ...............................................................
OSD Display .......................................................
Time Setting .......................................................
Reset .................................................................
Exit .........................................................................
11. Taking Care of Your TV & Remote Control ....................
12. Troubleshooting ...........................................................
13. Warranty and Service ..................................................
14. Specifications ..............................................................
15. Glossary .....................................................................
2
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
55
56
57
59
60
61
1
Regulatory Information
FCC Compliance Statement1
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Additional Information
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following
measures:
•
•
•
•
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help
Warning: You are cautioned that changes or modifications not
expressly approved by the party responsible for compliance could void
your authority to operate the equipment.
1. applies only to products purchased in the United States of America
3
DOC Compliance Notice1
This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus as set out in the Radio Interference
Regulations of the Canadian Department of Communications.This
device complies with Canada ICES-003 Class B.
CE Conformity Statement2
This device complies with the requirements set out in the Council
Directive on the approximation of the Laws of the Member States
relating to Electromagnetic Compatibility (89/336/EEC) and the
Amendment Directive (92/31/EEC), Low-Voltage Directive (73/23/EEC)
and the Amendment Directive (93/68/EEC).
1. applies only to products purchased in Canada
2. applies only to products purchased in the European Union
4
2
Description of Warning Symbols
Before You Proceed
1. Read all Safety Notices in Section 2 of this manual and
instructions in the User’s Manual carefully before either plugging
in or turning the TV on.
2. Keep this User’s Manual in a safe place for future reference.
Keep the box and packaging in case the TV needs to be shipped
in the future.
3. Follow the TV and warning label instructions.
4. Any uses, operations, changes, alterations or modifications of
the TV that do not follow the instructions in this manual will void
this TV’s warranty.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING
CAUTION
This symbol is used to alert
users to pay attention to
important descriptions
regarding usage, maintenance
(repair), and additional
important information related
to this TV.
This symbol is used to alert
users to the risk of electric
shocks due to dangerous and
uninsulated components.
5
3
Safety Notices
Electric Power Notice
Electric power may cause personal injury and mechanical damage if
misused. Although safety has been taken into consideration during the
design and production of this TV, electric shock or fire can result if the
TV is misused. To prevent potential danger, read and follow the
instructions and warnings contained in this manual when setting up,
operating or cleaning the TV. In addition, please read all “Safety
Notices” contained in this manual carefully before using the TV.
Power Supply Safety Notes
1. To avoid electric shocks, do not use an extended power cord or
an outlet that does not match this TV's plug or leaves the plug
exposed.
2. This TV has a 3-pin grounded plug. The third pin connects to
ground; do not remove it or alter it in anyway.
3. If the power cord or plug is damaged or worn, unplug it
immediately and contact an authorized service technician for
maintenance.
4. To avoid fire or electric shocks, do not overload electric power
outlets.
6
Installation Safety Notes
Antenna
We suggest that you use an outdoor antenna to get the best signal
possible unless you have cable TV or a centralized indoor antenna
system. You may, however, use an antenna indoors if it is placed in a
location free from interference.
Location
Avoid prolonged exposure to sunlight or other strong sources of heat.
Leave sufficient distance between the TV and the wall to provide
enough space for the emission of heat.
WARNING
To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture.
Apparatus shall not be exposed to dripping or splashing and no
objects filled with liquids, such as vases, shall be placed on the
apparatus.
Power
To avoid danger of fires or electric shock, only use those adapters
listed below, which are compatible with this TV.
•
•
EDAC POWER ELECTRONICS CO., LTD.: EA1050E-120
LI SHIN INTERNATIONAL ENTERPRISE CORP.: 0217B1240
7
IMPORTANT SAFETY INSTRUCTIONS
8
1
2
3
4
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
5
Do not use this apparatus near water.
6
Clean only with dry cloth.
7
Do not block any ventilation openings. Install
in accordance with manufacturer’s
instructions.
8
Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9
Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding-type plug has two blades
and a third grounding prong. The wide blade
or the third prong are provided for your
safety. If the provided plug does not fit into
your outlet, consult an electrician for
replacement of the obsolete outlet.
10 Protect the power cord from being walked on
or pinched, particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
11 Only use attachments/accessories specified
by the manufacturer.
12 Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13 Unplug this apparatus during lightning
storms or when unused for long periods of
time.
14 Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as power-supply cord or plug is
damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.
CAUTION
These servicing instructions are for use by
qualified service personnel only.To reduce
the risk of electric shock, do not perform any
servicing other than that contained in the
operating instructions unless you are
qualified to do so.
9
Personal Safety
To avoid overloading the power supply, never
plug too many electrical devices into an outlet,
power strip, or extension cable.
Dangerous high-voltage electric power
components are located inside the TV. To avoid
electric shock, do not disassemble the TV in any
way.
Do not place or drop metals, small objects, or
flammable materials into the vent of the TV.
If the TV is dropped, falls down, or is otherwise
damaged, unplug the power cord immediately
and contact an authorized service technician.
If any fluid is sprayed or dropped into the TV,
contact an authorized service technician.
The screen of the TV is made of glass. Avoid
hitting or scraping it. If the screen is broken, do
not touch the broken glass.
Do not allow children to use the TV unattended.
10
Installation
Do not place the TV in locations where there is
excessive steam or dust.
Avoid blocking the TV's vents, do not place the
TV on a bed, sofa, carpet, or in a sealed cabinet.
Install the outdoor antenna (not included) away
from power transmission lines to avoid possible
danger.
Unplug the power cord and antenna connector
when there is a storm or when the TV is not in
use for long periods to avoid electric shock from
lightning.
11
Operation
V
This TV is designed for home power sources as
labeled on the casing. Avoid using any other
power accessories to avoid electric shock or
other damage.
The plug can be inserted into an outlet in only
one direction as shown to the left. Do not alter
the plug. Contact an authorized service
technician if you cannot plug it in correctly.
If there is any problem that cannot be resolved
according to the instructions given in this
manual, contact an authorized service technician
immediately. Do not attempt any methods not
covered in this manual.
Maintenance
Do not attempt to repair the TV by yourself.
Contact an authorized service technician. Ask
the service technician to complete a safety
inspection before switching the power on after
completing any maintenance.
12
4
Preface
Thank you for purchasing a Hannspree Liquid Crystal Display Television
(LCD TV). Your new TV will allow you to enjoy superior audio and video
while enriching your lifestyle with advanced technology.
Please carefully read this manual in its entirety before setting up, using
or operating your TV. To ensure the safe and correct installation and
operations of the TV, it is important that the safety and operation
instructions in this manual are followed.
This instruction manual is designed to assist you in setting up and using
the TV. The information in this manual has been carefully checked for
accuracy; however, no guarantee is given to the correctness of the
contents. The information in this manual is subject to change without
notice.
To the extent allowed by applicable law, Hannspree California Inc.
(“Hannspree”) shall not be liable for direct, indirect, special, exemplary,
incidental or consequential damages arising from any defect or
omission in this manual, even if advised of the possibility of such
damages in advance.
13
Copyright
© Copyright 2004 Hannspree California Inc.
All rights reserved. This manual is protected by copyright and
distributed under licenses restricting its use, copying and distribution.
No part of this manual may be reproduced in any form by any means
without the prior written authorization of Hannspree. The TV described
in this manual may include copyrighted software of Hannspree (or other
third parties). Hannspree (or other third parties) preserves the exclusive
rights for copyrighted software, such as the right to distribute or
reproduce the copyrighted software. Accordingly, and to the extent
allowed by applicable law, any copyrighted software contained in the
product described herein shall not be distributed, modified, reverse
engineered, or reproduced in any manner without the prior written
authorization of Hannspree (or of other third parties).
The Hannspree logos presented herein are trademarks of Hannspree.
All other product names, trademarks or logos mentioned herein are
used for identification purpose only, and may be the trademarks or
registered trademarks of their respective owners.
The purchase of the product described herein shall not be deemed to
grant, either directly or by implication, estoppel or otherwise, any
license under the copyrights, patents, patent applications or trademarks
of Hannspree, except for the normal, non-exclusive use that arises by
operation of law in the sale of a product.
14
5
Introducing the TV
Thank you for purchasing this LCD TV. Your LCD TV is designed to be safe,
versatile, and easy to use. The design makes it a fun addition to any room.
You can watch broadcast or cable television channels, and easily connect a
VCR, VCD or DVD player to the standard RCA and S-Video input ports that
are included in the 4-IN-1 A/V cable.
Convenient control buttons located on the TV and a handy remote control let
you change channels, adjust the volume, and change display settings
through an easy-to-use on-screen display menu system. The built-in stereo
speakers provide full rich sound and a convenient audio output port lets you
connect to an external audio system or headphones.
Features
•
•
•
•
•
Built-in TV tuner
4-IN-1 A/V cable
On-Screen Display (OSD) menu system
Built-in stereo speakers
Audio/Video support
15
6
Checking Package Contents
Make sure the following components are included in the box. Please contact
Hannspree Customer Service immediately if anything is missing or
damaged.
•
•
•
•
•
•
•
•
•
•
•
TV
User’s manual
Quick start guide
Warranty and service manual
Power cord
Power adapter
4-IN-1 A/V cable
Remote control and battery/batteries
RCA jack x 3
S jack x 1
Stop Card
16
7
Getting Started
Control Panel
Description
Icon
/ Power
Power
SOURCE / TV/AV /
TV
MENU/M/
Menu
Select
channel
Adjust
volume
Turns the TV on and off.
Indicates power status.
Power LED
Source
Function
channel up
/ S / X / +)
channel down
/ T / W / –)
(
(
(
volume up
/ + / S / X)
volume down
(
/ – / T / W)
Selects the input source to be
displayed
(TV/CATV, AV1, or AV2).
Turns the On-Screen Display (OSD)
menu on and off.
Changes channels. Press channel
up to increase the channel number.
Press channel down to decrease the
channel number. In PC or AV mode,
press either button to return to TV
mode.
Press volume up to increase the
audio volume. Press volume down to
decrease the audio volume.
17
Input and Output Jacks
Description
AV1 (R-AUDIO/
L-AUDIO/VIDEO)
AV2
ANT
DC-IN
Headphone
line out jack
18
Connector
Function
Connects to a right audio (red)
or left audio (white) cable, or
video (yellow) cable.
Use the included 4-IN-1 A/V
cable to connect external
devices, such as a VCR, VCD,
DVD player, CVBS RCA
cables or a game device.
Audio Input: AV connector
audio (white and red) cables.
Video Input: AV connector
video (yellow) or S-Video
cable.
Connects to an antenna or
CATV cable television line.
Connects to the included
power adapter.
Connects to headphones or
external speakers
Remote Control
Description
Menu
Arrow
Number
Icon
Function
/
Press this button to activate the OSD
menu system and to adjust various
settings and personal preferences.
</>
Press W and X to scroll through the
on-screen display menus.
Favorite channels can be selected
using the W and X buttons on the
remote control.
/
MENU
ENTER MENU M
W/X/
1
2
3
4
5
6
7
8
9
0
Recall
MTS
RECALL
Press this button to return to the last
channel selected.
MTS
Press this button to enable the
bilingual function when the program
has stereo/SAP/MONO capabilities.
Power
Adjust volume
Mute
Use to select a channel directly.
Press 0-9 to enter the channel
number (press 1 and 0 for channel
10).
Turns the TV power on or off.
-VOL VOL+
VOL VOL
VOL VOL
VOL VOL
Press volume up to increase the
audio volume. Press volume down to
decrease the audio volume.
MUTE
Press this button to eliminate sound.
Press mute again or press the
volume adjust buttons to restore
sound.
19
Description
Icon
Function
Select channel
CH CH
CH CH
CH CH+
Changes channels. Press channel
up to increase the channel number.
Press channel down to decrease the
channel number. In PC or AV mode,
press either button to return to TV
mode.
Source
SOURCE
Press this button to cycle the video
input sources. The source is
displayed on the screen.
Reset (selected
models only)
Display (selected
models only)
Caption
(selected models
only)
Auto (selected
models only)
20
RESET
DISPLAY
Press this button to reset the TV.
Press this button to show messages
on the screen, such as the channel
number and other. Press this button
again to show the real-time clock.
Press this button again to close the
displayed message.
Press this button to enable the
closed captions/subtitles (Only
CAPTION / CAPT. available with 15-inch TVs). This
option may not be available in your
local area.
AUTO
Press this button to automatically
adjust the screen parameters in PC
mode (only available with 15-inch
TVs).
Inserting the Remote Control Battery/Batteries
Lithium battery/batteries
1 Open the battery compartment cover at the
back of the remote control (A).
2 Slide the battery/batteries, with the positive
(+) side facing up, underneath the shorter set
A
B
of metal contacts (B).
3 Press the battery/batteries firmly into place
C
in the battery compartment (C)
4 Replace the battery compartment cover (D).
D
Note
Your remote control may have either AAA type batteries or CR2032 lithium
battery/batteries.
21
AAA battery/batteries
1 Open the battery compartment cover at the
back of the remote control (A).
2 Insert the battery/ batteries paying
attention to the polarity markings inside
A
B
the battery compartment (B).
3 Replace the battery compartment cover
(C).
C
Note
Your remote control may have either AAA type batteries or CR2032 lithium
battery/batteries.
22
CAUTION
•
•
•
•
•
•
•
If the remote control is not used for a long period, remove the batteries
and store them separately.
Handle damaged or leaking batteries carefully, and wash hands after
such handling.
If your remote control has two batteries, do not mix new and old
batteries because the life of the new batteries will be shortened.
Chemical fluids may leak from the old batteries.
Danger of explosion if battery is incorrectly replaced. Replace only with
the same or equivalent type recommended by the equipment
manufacturer. Discard used batteries according to manufacturer’s
instructions.
Refer to your local recycling or waste disposal rules and contact a local
waste disposal vendor to dispose of used batteries.
The remote control may have a magnet in it, so do not place magnetic
sensitive items such as watches, credit cards, or flash media close to
the cover.
Do not use force when pulling the remote control cover open; you may
damage the hinge.
23
8
Making Connections
Connecting to an Antenna or Cable TV
1 Connect one end of the VHF/UHF (Antenna) or CATV cable to ANT
Jack (VHF/UHF IN Jack) on the back of the TV.
2 Connect the other end of the VHF/UHF (Antenna) or CATV cable to
the antenna socket or CATV cable.
Antenna
ANT
ANT jack
(VHF/UHF IN jack)
Antenna/CATV
socket
Antenna/CATV
coaxial cable
Note
If you cannot receive channels after connecting to an antenna or cable TV
line, try scanning for channels. See “Auto Program” on page 46.
24
Connecting to AV Devices
Connect external devices such as a VCR, VCD or DVD player, or video
game console to the TV using the supplied 4-IN-1 A/V cable.
Connecting to a VCR/VCD/DVD Player
The illustration presented here shows how to connect the TV to a VCR,
VCD or DVD player. Actual connections may vary according to the make
and model of the device. Refer to the user’s manual included with the device
for more detailed instructions.
VCR
DVD
VCD
AV2
4-IN-1 A/V jack
B
S-Video
connector
R
W Y
AV
connectors
4-IN-1 A/V cable
Note
• The cables are color-coded (black, red, white, yellow). Connect each
color-coded cable to the appropriate connector on your device.
• When connecting the S-Video connector and AV connector at the same
time, the priority is given to the S-Video connector.
25
Connecting to a Video Camera
The instructions presented here are a general guide to connecting the TV to
a camcorder or other type of digital camera. Actual connections may vary
according to the make and model of the device. Refer to the user’s manual
included with the camcorder or camera for more detailed instructions.
WB
S
AV2
4-IN-1 A/V jack
S-Video
connector
B
R
W
Y
4-IN-1 A/V cable
AV connectors
Note
The cables are color-coded (black, red, white, yellow). Connect each colorcoded cable to the appropriate connector on your device.
26
Connecting External Speakers or Headphones
External speakers or headphones may be used to listen to the TV rather
than using the built-in speakers. Connect external speakers to the speaker
line out port or headphones to the headphone port as illustrated.
Headphones
Headphone /
Speakers line
out jack
HEADPHONE/
Speakers
Notes
• External speakers or headphones are not included with the TV.
• The internal TV speakers will not output sound when headphones are
plugged in.
• Use external speakers with built-in amplifiers only.
27
Connecting the Power Adapter
1 Connect the power cord to the power adapter as illustrated.
2 Plug the power adapter connector into the DC-IN input jack on the
rear panel of the TV.
3 Insert the three-pronged plug at the other end of the power cord into
a power outlet.
Three-pronged
plug
Power outlet
DC-IN
DC-IN
DC-IN input jack
Power cord
Power adapter
28
9
Using the TV
Using the Remote Control
For best results, use the remote control within a distance of 16 feet
(5 meters) from the front of the TV. Do not exceed an angle of 30 degrees
when pointing at the TV.
Notes
• The operational distance may be shortened when the signal sensor is
directly exposed to strong light.
• Aim the transmitter on the remote control at the signal sensor and
ensure that there are no obstacles between them.
Turning the TV On and Off
1 Press power
2
TV.
Press power
on the remote control or control panel to turn on the
again; the TV is in off mode.
Selecting Channels
Press channel up or channel down on the control panel to select the
channel or enter the specific channel number by pressing the number
buttons on the remote control.
Switching Source Signals
Press source to select the incoming source signal.
The current source setting (TV/CATV, AV1, or AV2 ) appears on the upper
left corner of the screen.
Adjusting the Volume
Press volume up to increase the volume. Press volume down to decrease
the volume. The volume level is displayed on the screen.
29
10
Adjusting On-Screen Display (OSD)
Settings
The On-Screen Display (OSD) menu system provides a quick and simple
method to adjust your TV’s settings. This chapter describes how to change
each of the available settings.
The OSD can be used with either the remote control or the control panel.
Function
Control Panel Icon
Button
Remote Control
Icon
Menu
Menu
Menu
menu/ENTER, M
Channel
up
CH (X /
/ + / S)
Right arrow
/X
Channel
down
CH (W /
/ – / T)
Left arrow
/W
Enter
Menu
Enter
menu/ENTER, M
Note
The following sections explain how to adjust settings in the OSD menus
using the control panel.
OSD Setting Menu
Main Menu
Press menu to enter the OSD
Main Menu screen.
The Main Menu appears
ETC
Brightness
30
Note
To exit the OSD menus, press channel up or channel down to select Exit
. Then press menu to exit the OSD menus. Also, after you finish setting
OSD parameters, follow these instructions to exit the OSD menus.
30
Brightness
1 Press menu. The brightness slide bar
Main Menu
is highlighted.
2 Press channel up to increase the
ETC
brightness.
Brightness
3 Press channel down to decrease the
30
brightness.
4 Press menu to confirm the setting
and return to the Main Menu.
Note
The new setting is confirmed
automatically when the OSD times out.
31
Contrast
1 Press channel down or channel up to
Main Menu
select Contrast.
2 Press menu. The contrast slide bar
ETC
is highlighted.
Contrast
3 Press channel up to increase the
30
contrast.
4 Press channel down to decrease the
contrast.
5 Press menu to confirm the setting
and return to the Main Menu.
Note
The new setting is confirmed
automatically when the OSD times out.
32
Video Setting
Press menu to enter the OSD
Main Menu screen.
1 Press channel down or
channel up to select Video
Setting.
2 Press menu to enter the Video
Main Menu
ETC
Video Setting
Setting menu.
33
Hue
1 Press menu to enter the Hue
Video Setting
submenu.
G
R B
2 Press channel up to increase green
and decrease red.
Hue
3 Press channel down to decrease
G
R
green and increase red.
4 Press menu to confirm the setting
and return to the Video Setting
menu.
Note
The new setting is confirmed
automatically when the OSD times out.
34
Saturation
1 Press channel down or channel up to
Video Setting
select Saturation.
G
R B
2 Press menu to enter the Saturation
submenu.
Saturation
3 Press channel up to increase the
127
saturation.
4 Press channel down to decrease the
saturation.
5 Press menu to confirm the setting
and return to the Video Setting
menu.
Note
The new setting is confirmed
automatically when the OSD times out.
35
Sharpness
Video Setting
G
R B
Sharpness
1 Press channel down or channel up to
select Sharpness.
2 Press menu to enter the Sharpness
submenu.
3 Press channel up to increase the
sharpness.
4 Press channel down to decrease the
sharpness.
5 Press menu to confirm the setting
and return to the Video Setting
menu.
Note
The new setting is confirmed
automatically when the OSD times out.
36
Color Temperature
1 Press channel down or channel up to
Video Setting
select Color Temp.
2 Press menu to enter the Color
G
R B
Temperature submenu. There are
Color Temp.
three default color temperatures to
Choose from.
Standard Color
Press channel down or channel up to
select Standard, then press menu.
Warm Color
Press channel down or channel up to
select Warm, then press menu.
Cold Color
Press channel down or channel up to
select Cold, then press menu.
Note
The new setting is confirmed
automatically when the OSD times out.
37
Audio Setting
Press menu to enter the OSD
Main Menu screen.
1 Press channel down or
channel up to select Audio
Setting.
2 Press menu to enter the Audio
Setting menu.
38
Main Menu
ETC
Audio Setting
Treble
Audio Setting
TRE BASS
Treble
1 Press menu to enter the Treble submenu.
2 Press channel up to increase the
treble.
3 Press channel down to decrease the
treble.
4 Press menu to confirm the setting
and return to the Audio Setting
menu.
Note
The new setting is confirmed
automatically when the OSD times out.
39
Bass
Audio Setting
TRE BASS
Bass
1 Press channel down or channel up to
select Bass.
2 Press menu to enter the Bass
submenu.
3 Press channel up to increase the
bass.
4 Press channel down to decrease the
bass.
5 Press menu to confirm the setting
and return to the Audio Setting
menu.
Note
The new setting is confirmed
automatically when the OSD times out.
40
Balance
1 Press channel down or channel up to
Audio Setting
select Balance.
TRE BASS
2 Press menu to enter the Balance
Balance
submenu.
3 Press channel down to shift the
L
R
balance to the left speaker.
4 Press channel up to shift the balance
to the right speaker.
5 Press menu to confirm the setting
and return to the Audio Setting
menu.
Note
The new setting is confirmed
automatically when the OSD times out.
41
Mute
Audio Setting
TRE BASS
1 Press channel down or channel up to
select Mute.
2 Press menu to enter the Mute
Mute
submenu.
3 Press channel up to turn the mute
On
Off
off.
4 Press channel down to turn the mute
on.
5 Press menu to confirm the setting
and return to the Audio Setting
menu.
Note
The new setting is confirmed
automatically when the OSD times out.
42
TV Setting
Press menu to enter the OSD
Main Menu screen.
1 Press channel down or
Main Menu
channel up to select TV
Setting.
2 Press menu to enter the TV
ETC
TV Setting
Setting menu.
43
TV/CATV
1 Press menu to enter the TV/CATV
TV Setting
A
+
M -
CH
TV/CATV
TV
CATV
submenu.
Receiving Cable TV
Press channel up to select CATV,
then press menu.
Receiving Broadcast TV
Press channel down to select TV,
then press menu.
Note
The new setting is confirmed
automatically when the OSD times out.
44
MTS
1 Press channel down or channel up to
TV Setting
A
+
M -
CH
select MTS.
2 Press menu to enter the MTS
submenu. Select from the following
MTS
options.
Stereo
SAP
Mono
Stereo
Press channel down to select
Stereo. A green dot appears and
Stereo is highlighted in yellow. Press
menu again to confirm the selection.
SAP
Press channel up to select SAP.
Press menu again to confirm the
selection. If a green dot does not
appear, then your service provider
doesn’t support SAP. This option
may not be available in your local
area.
Mono
Press channel up to select Mono.
Press menu again to confirm Mono,
which outputs sound through a
signal channel.
Note
The new setting is confirmed
automatically when the OSD times out.
45
Auto Program
1 Press channel down or channel up to
TV Setting
A
+
M -
CH
select Auto Program.
2 Press menu to enter the Auto
Program Setting submenu.
Auto Program
3 Press channel down or channel up to
ON
OFF
select ON or OFF and press menu.
The screen shows “Auto Program...”
and the channel indicator increments
from 2 to 69 (ANT connection) or
from 1 to 125 (CATV cable
connection).
The screen displays the first channel
that is successfully found after
scanning is complete.
46
Manual Program
TV
Setting
A
M
+
-
1 Press channel down or channel up to
select “Manual Program”.
CH
2 Press menu to enter the Manual
Manual Program
DOWN
Program submenu.
UP
CH. 4
3 Press channel down or channel up
to find the channel you want to add.
Press menu to select the channel.
4 Press menu to exit, and then access
Channel Add/Erase function to add a
desired channel.
47
Channel Add/Erase
TV
Setting
A
M
+
-
1 Select the channel you want to add or
delete, for example, Channel 28.
CH
CH. Add/Erase
Erase
Add
CH. 7
2 Press channel down or channel up to
select CH. Add/Erase.
3 Press menu to enter the Channel
Add/Erase submenu. Select from the
following options.
Add Channel
1 Press channel down or channel up to
select Add.
2 Press menu to select channel.
Erase Channel
1 Press channel down or channel up to
select Erase.
2 Press menu to select channel.
When you return to the normal TV
screen and use channel up and
channel down to browse channels,
an erased channel (for example,
Channel 28) will be skipped
automatically.
Note
You can still access the erased channel
by entering the channel number using the
number keys on the remote control.
48
Favorite Channel
TV
Setting
A
M
+
-
1 Press channel down or channel up
to select Favorites CH. Edit.
CH
2 Press menu to enter the Favorites
Favorites CH. Edit
M1
10
M2
10
M3
10
M4
10
CH. Edit submenu.
3 The screen displays the four
Exit
favorite channels: M1, M2, M3, and
M4.
TV
Setting
A
M
+
-
4 Press channel down or channel up
to select the channel number you
CH
want to set for M1. Press menu to
Favorites CH. Edit
M1
18
M2
10
M3
10
TV
Setting
A
M
+
-
M4
10
confirm the setting and move to the
Exit
next favorite channel, M2.
5 Repeat step 4 for M2, M3 and M4.
CH
Favorites CH. Edit
M1
10
M2
61
M3
10
M4
10
Exit
Note
Favorite channels can be selected using
the W and X buttons on the remote
control.
49
Miscellaneous Setting
Press menu to enter the OSD
Main Menu screen.
1 Press channel down or
channel up to select
Miscellaneous Setting.
2 Press menu to enter the
Miscellaneous Setting menu.
50
Main Menu
ETC
Miscellaneous
Language
Miscellaneous
CH
submenu.
2 The screen displays the available
OSD languages: English and
Language
English
1 Press menu to enter the Language
Español.
Español
3 Press channel down or channel up
to select a language. The OSD
language changes as soon as you
select a language.
4 Press menu to confirm your choice.
51
Sleeper
The sleeper turns the LCD TV off automatically after a set period of time.
Miscellaneous
CH
Sleeper
off 30 60 90 120
1 Press channel down or channel up to
select Sleeper.
2 Press menu to enter the Sleeper
submenu.
3 The screen displays the available
sleeper setting:
–
–
–
–
–
OFF
30 minutes
60 minutes
90 minutes
120 minutes
4 Press channel down or channel up
to select a value.
5 Press menu to confirm your choice.
52
OSD Display
This setting allows you to set the amount of information that appears on the
LCD screen when display is pressed. You can choose from three settings:
Off, Portion, or All.
1 Press channel down or channel up to
Miscellaneous
select OSD Display.
CH
2 Press menu to enter the OSD
Display submenu.
OSD Display
All
Portion
3 The screen displays the available
Off
settings: All, Portion, or Off.
4 Press channel down or channel up to
select “All”, “Portion”, or “Off”.
5 Press menu to confirm your choice.
53
Time Setting
This setting allows you to set the TV clock.
Miscellaneous
CH
Time Setting
-12- : -12 AM
1 Press menu to enter the OSD menus.
2 Press channel up or channel down to
select Miscellaneous.
3 Press menu to enter the
Miscellaneous menu.
4 Press channel down or channel up to
select Time Setting.
Miscellaneous
CH
Time Setting
-12- : -12 AM
5 Press menu to enter the Time
Setting submenu.
6 The screen displays the current
setting. The hour is highlighted in
yellow.
7 Press channel down or channel up to
adjust the hour setting, then press
Miscellaneous
CH
menu.
8 The minutes are highlighted in
yellow. Press channel down or
Time Setting
channel up to adjust the minute
setting.
-12- : -12 AM
9 Press menu to confirm the new time
setting.
Note
The new setting is confirmed
automatically when the OSD times out.
54
Reset
The Reset function returns all of your LCD TV’s user settings to their factory
defaults.
Warning:
The reset function erases all of your custom and favorite channel
settings, and will reset all display settings (such as contrast,
brightness, etc.) to the factory default values. The reset function
cannot be reversed once it begins.
1 Press channel down or channel up to
Miscellaneous
select Reset.
CH
2 Press menu to enter the Reset
Reset
submenu.
3 Press channel down or channel up to
Yes
select “Yes” or “No”. By default, “No”
No
is already selected (highlighted in
yellow).
4 Press menu to confirm your choice.
Exit
Exit turns off the OSD menus and returns you to TV mode.
1 Press channel down or channel up to
select Exit.
Main Menu
2 Press menu to exit the OSD menus.
ETC
Exit
55
11
Taking Care of Your TV & Remote
Control
Turn the power off before you begin cleaning the
TV.
For best results, use a clean lens cloth to
remove dust and fingerprints from the screen.
GAS
OIL
Do not wipe the shell of the TV with alcohol,
methanol, gasoline or oil products to avoid
damaging the finish. Wipe the shell with a dry
soft cloth and use neutral cleaning fluids.
If your model has leather components, wipe the
leather parts with a dry cloth and keep the area
dry. Place the TV far from sources of steam to
avoid making the leather wet.
Be careful to disconnect the power plug
correctly. Hold the plug. Do not attempt to
disconnect the plug by pulling on the power cord.
Arrange and store the power cord neatly as
shown to the left to avoid knotting or bending
which may cause fire due to damage or electric
leakage.
Note
Protect the remote control from shock or vibration to avoid damage.
Do not place the remote control in hot or humid locations.
56
12
Troubleshooting
Situation
Solution
•
•
•
•
No picture and sound.
•
•
•
No picture, or poor picture, sound is OK.
Picture is not in color.
•
•
Check the antenna and cable connections.
Adjust the brightness in the OSD menus.
See “Brightness” on page 31.
•
Adjust the saturation in the OSD menus.
See “Saturation” on page 35.
Make sure all cables are connected
properly.
•
•
•
Picture is OK, no sound.
•
•
•
•
One of the speakers has no sound.
Cannot receive some TV channels using
cable TV.
Want to reset TV settings.
Connect the power cord properly.
Check if the power LED is on or not.
Press power on the control panel or remote
control.
Press source to cycle through connected
video sources.
Press channel up or channel down to
switch to other TV stations.
Check the TV/CATV OSD settings. See
“TV/CATV” on page 44.
Make sure all cables are connected
properly.
•
Make sure the source device is functioning
properly.
Make sure the audio cable is connected
securely.
Turn the mute off.
Press volume up on the control panel or
remote control.
Make sure the MTS option is set to Stereo,
SAP, or Mono. See “MTS” on page 45.
Adjust the balance in the OSD menus. See
“Balance” on page 41.
Make sure the audio cable is connected
securely.
•
Try the Auto Program function in the OSD
“TV Setting” menu. See “Auto Program” on
page 46.
•
Use the Reset function in the OSD menu.
See “Reset” on page 55.
57
Situation
Solution
•
If OSD items are colored in light blue, the
system is in a state such that those settings
are not available.
•
Make sure the video signal cable is
connected properly.
•
Adjust the location of the antenna, placing it
far from roads or sources of interference.
Check the antenna and the video signal line
connections.
Cannot operate menus.
Screen image turns over.
Snow appears on the screen.
Blurred or overlapped images.
Remote control doesn’t work.
•
•
•
•
Readjust the sharpness setting.
Choose programs with high quality signals.
Adjust the direction of the antenna or
change the video signal cable.
•
•
•
•
Make sure the battery is inserted correctly.
Replace the battery with a new one.
Make sure the TV power cord is plugged in.
Make sure the path between the remote
control and the sensor is clear.
Try operating the remote control at a closer
distance to the TV. Refer to “Using the
Remote Control” on page 29.
•
58
13
Warranty and Service
For complete warranty service information, please refer to the “Warranty
and Service Manual” enclosed with your TV.
59
14
Specifications
9.6 / 12.1-inch LCD TV
LCD Panel Size
9.6 / 12.1-inch TFT
Aspect Ratio
4:3
Display Resolution
800 (horizontal) x 600 (vertical)
TV System
NTSC
Video System
AV1: RCA jack
AV2: S-Video Input and Composite
Video Input (through the 4-IN-1 A/V
cable)
Audio System
AV1: RCA left & right jacks
AV2: 10-pin mini-DIN (Audio Input with
4-IN-1 A/V cable)
3.5mm ø headphone jack (Audio Output)
Built-in Speakers
2W + 2W / 3W + 3W
Power Supply
100-240V, 50/60 Hz, 12V DC
Power Consumption
40 W (Average)
Optional Accessories
External Speakers
60
15
Glossary
Aspect Ratio: The ratio of width to height of a film, image or display
screen.
Broadcast TV: Broadcasting video signals using high-frequency
electromagnetic waves to distribute television channels to viewers
(standard TV broadcast).
CATV: Community Antenna Television, the original name for cable
TV. A television distribution system that uses coaxial cable instead of
the traditional radio broadcasting (over-the-air) method to deliver
television, FM radio, and other services to consumers.
Color Temperature: Adjusting the color temperature enables you to
set the intensity of white light. Color temperature is measured in
Kelvin (K). Higher color temperatures result in a blue tint. Lower
temperatures result in a red tint.
Hue: Colors in a color system are measured by hue, saturation and
luminance. Hue indicates the predominant color.
LCD (Liquid Crystal Display): A display technology that uses rodshaped molecules (liquid crystals) that flow like liquid and bend light.
MTS: Multi-channel Television Sound. Enables reception of audio
other than the primary (stereo) audio signal. SAP (Second Audio
Program) enables reception of a separate channel that may be a
different language or completely different information such as the
news.
OSD (On-Screen Display): A control panel on the television screen that
allows you to select viewing options.
Saturation: Chromatic purity indicating the amount of white contained
in a color. Fully saturated colors are pure colors; less saturated
colors appear as pastel shades.
Stereo: is the default audio signal belonging to a particular channel.
S-Video: Separate video, a video cabling standard used to transmit
video by keeping brightness (Y) and color information (C) on
61
separate channels. Most often used with camcorders, VCRs, and
quality receivers and amplifiers to provide sharper pictures.
62
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement