IBM Partner Pavilion Projector PROJECTOR M400 User manual

IBM Partner Pavilion Projector PROJECTOR M400 User manual
IBM M400 PROJECTOR
User’s Guide
IBM M400 PROJECTOR
User’s Guide
Note: Before using this information and the product it supports, read the information in
Appendix D, “Service and Support,” on page D-1and Appendix E, “IBM Statement of
Limited Warranty - Z125-4753-07 - 11/2002,” on page E-1
First Edition (May 2004)
© Copyright International Business Machines Corporation 2004. All rights reserved.
US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract
with IBM Corp.
Contents
Safety information . . . . . . . . . . v
Registering your option . . . . . . . . xi
Setup menu . . .
Option menu . .
Information menu .
Sub Menus . . . .
White Balance . .
Input format . .
Language . . .
Zoom . . . . .
Panning . . . .
Lamp Timer reset .
Factory default .
Hot Keys . . . .
Quick menu . . .
Chapter 1. Product description . . . . 1-1
Appendix A. Maintenance . . . . . . A-1
General safety guidelines. . . . . . . vii
Service . . . . . . . . . .
Power cords and power adapters .
Extension cords and related devices
Plugs and outlets . . . . . .
Batteries . . . . . . . . .
Heat and product ventilation . .
CD and DVD drive safety . . . .
Packing checklist .
Projector features .
.
.
.
.
.
.
.
.
.
.
.
.
. vii
. vii
. . . . . . viii
. . . . . . viii
. . . . . . viii
. . . . . . ix
. . . . . . ix
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. 1-1
. 1-4
Chapter 2. Setting up the projector . . 2-1
Starting and shutting down the projector
Positioning the projector . . . . . .
Adjusting the projector level and height
Adjusting the image . . . . . . .
Image resolution . . . . . . . .
Adjusting the volume . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
2-1
2-2
2-3
2-4
2-5
2-5
Chapter 3. Connecting devices to the
projector . . . . . . . . . . . . . 3-1
Connecting devices
.
.
.
.
.
.
.
.
.
.
. 3-1
Chapter 4. Using the projector features 4-1
Using the remote control . . . . . .
Inserting the remote control batteries
Operating range . . . . . . .
Projector and remote control buttons .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
4-1
4-2
4-3
4-3
Chapter 5. On-Screen Display menu
controls . . . . . . . . . . . . . . 5-1
Navigating the OSD
Image menu . .
Color menu . .
View menu . .
.
.
.
.
.
.
.
.
© Copyright IBM Corp. 2004
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
5-1
5-1
5-2
5-4
Cleaning the lens . .
Replacing the projector
Resetting the lamp .
Using the security slot
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. .
lamp
. .
. .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Appendix B. Troubleshooting
Projector LEDs . . .
Thermal protector .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. 5-5
. 5-6
. 5-7
. 5-8
. 5-8
. 5-10
. 5-11
. 5-11
. 5-11
. 5-11
. 5-12
. 5-12
. 5-13
.
.
.
.
A-1
A-1
A-2
A-3
. . . . B-1
.
.
.
.
.
.
.
.
. B-3
. B-4
Appendix C. Specifications . . . . . C-1
Appendix D. Service and Support . . . D-1
Online technical support . .
Telephone technical support .
.
.
.
.
.
.
.
.
.
.
.
.
. D-1
. D-1
Appendix E. IBM Statement of Limited
Warranty - Z125-4753-07 - 11/2002. . . E-1
Part 2 - Country-unique Terms . . . . . . . E-4
Part 3 - Warranty Information . . . . . . . E-15
Appendix F. Notices . . . . . . . . . F-1
Trademarks . . . . . . . . .
Electronic emission notices . . . .
Federal Communications Commission
statement . . . . . . . . . .
. . .
. . .
(FCC)
. . .
.
.
. F-2
. F-2
.
. F-2
iii
iv
IBM M400 PROJECTOR: User’s Guide
Safety information
Before installing this product, read the Safety Information.
Antes de instalar este produto, leia as Informações de Segurança.
Pred instalací tohoto produktu si prectete prírucku bezpecnostních instrukcí.
Læs sikkerhedsforskrifterne, før du installerer dette produkt.
Ennen kuin asennat tämän tuotteen, lue turvaohjeet kohdasta Safety Information.
Avant d’installer ce produit, lisez les consignes de sécurité.
Vor der Installation dieses Produkts die Sicherheitshinweise lesen.
Prima di installare questo prodotto, leggere le Informazioni sulla Sicurezza.
Läs säkerhetsinformationen innan du installerar den här produkten.
vi
IBM M400 PROJECTOR: User’s Guide
General safety guidelines
Always observe the following precautions to reduce the risk of injury and property
damage.
Service
Do not attempt to service a product yourself unless instructed to do so by the IBM
Support Center. Use only an IBM authorized service provider who is approved to
repair your particular product.
Note: Some parts can be upgraded or replaced by the customer. These parts are
referred to as Customer Replaceable Units, or CRUs. IBM expressly identifies CRUs
as such, and provides documentation with instructions when it is appropriate for
customers to replace those parts. You must closely follow all instructions when
performing such replacements. Always make sure that the power is turned off and
that the product is unplugged from any power source before you attempt the
replacement. If you have any questions or concerns, contact the IBM Support
Center.
Power cords and power adapters
Use only the power cords and power adapters supplied by the product
manufacturer.
Never wrap a power cord around the power adapter or other object. Doing so can
stress the cord in ways that can cause the cord to fray, crack or crimp. This can
present a safety hazard.
Always route power cords so that they will not be walked on, tripped over, or
pinched by objects.
Protect the cord and power adapters from liquids. For instance, do not leave your
cord or power adapter near sinks, tubs, toilets, or on floors that are cleaned with
liquid cleansers. Liquids can cause a short circuit, particularly if the cord or power
adapter has been stressed by misuse. Liquids can also cause gradual corrosion of
the power cord terminals and/or the connector terminals on the adapter which can
eventually result in overheating.
Always connect power cords and signal cables in the correct order and ensure that
all power cord connectors are securely and completely plugged into receptacles.
Do not use any power adapter that shows corrosion at the ac input pins and/or
shows signs of overheating (such as deformed plastic) at the ac input or anywhere
on the power adapter.
Do not use any power cords where the electrical contacts on either end show signs
of corrosion or overheating or where the power cord appears to have been
damaged in any way.
© Copyright IBM Corp. 2004
vii
Extension cords and related devices
Ensure that extension cords, surge protectors, uninterruptible power supplies, and
power strips that you use are rated to handle the electrical requirements of the
product. Never overload these devices. If power strips are used, the load should
not exceed the power strip input rating. Consult an electrician for more
information if you have questions about power loads, power requirements, and
input ratings.
Plugs and outlets
If a receptacle (power outlet) that you intend to use with your computer
equipment appears to be damaged or corroded, do not use the outlet until it is
replaced by a qualified electrician.
Do not bend or modify the plug. If the plug is damaged, contact the manufacturer
to obtain a replacement.
Some products are equipped with a three-pronged plug. This plug fits only into a
grounded electrical outlet. This is a safety feature. Do not defeat this safety feature
by trying to insert it into a non-grounded outlet. If you cannot insert the plug into
the outlet, contact an electrician for an approved outlet adapter or to replace the
outlet with one that enables this safety feature. Never overload an electrical outlet.
The overall system load should not exceed 80 percent of the branch circuit rating.
Consult an electrician for more information if you have questions about power
loads and branch circuit ratings.
Be sure that the power outlet you are using is properly wired, easily accessible,
and located close to the equipment. Do not fully extend power cords in a way that
will stress the cords.
Connect and disconnect the equipment from the electrical outlet carefully
Batteries
All IBM personal computers contain a non-rechargeable coin cell battery to provide
power to the system clock. In addition many mobile products such as Thinkpad
notebook PCs utilize a rechargeable battery pack to provide system power when in
portable mode. Batteries supplied by IBM for use with your product have been
tested for compatibility and should only be replaced with IBM approved parts.
Never attempt to open or service any battery. Do not crush, puncture, or incinerate
batteries or short circuit the metal contacts. Do not expose the battery to water or
other liquids. Only recharge the battery pack strictly according to instructions
included in the product documentation.
Battery abuse or mishandling can cause the battery to overheat, which can cause
gasses or flame to “vent” from the battery pack or coin cell. If your battery is
damaged, or if you notice any discharge from your battery or the buildup of
foreign materials on the battery leads, stop using the battery and obtain a
replacement from the battery manufacturer.
Batteries can degrade when they are left unused for long periods of time. For some
rechargeable batteries (particularly Lithium Ion batteries), leaving a battery unused
in a discharged state could increase the risk of a battery short circuit, which could
viii
IBM M400 PROJECTOR: User’s Guide
shorten the life of the battery and can also pose a safety hazard. Do not let
rechargeable Lithium-Ion batteries completely discharge or store these batteries in a
discharged state.
Heat and product ventilation
Computers generate heat when turned on and when batteries are charging.
Notebook PCs can generate a significant amount of heat due to their compact size.
Always follow these basic precautions:
v Do not leave the base of your computer in contact with your lap or any part of
your body for an extended period when the computer is functioning or when
the battery is charging. Your computer produces some heat during normal
operation. Extended contact with the body could cause discomfort or, potentially,
a skin burn.
v Do not operate your computer or charge the battery near flammable materials or
in explosive environments.
v Ventilation slots, fans and/or heat sinks are provided with the product for safety,
comfort, and reliable operation. These features might inadvertently become
blocked by placing the product on a bed, sofa, carpet, or other flexible surface.
Never block, cover or disable these features.
CD and DVD drive safety
CD and DVD drives spin discs at a high speed. If a CD or DVD is cracked or
otherwise physically damaged, it is possible for the disc to break apart or even
shatter when the CD drive is in use. To protect against possible injury due to this
situation, and to reduce the risk of damage to your machine, do the following:
v Always store CD/DVD discs in their original packaging
v Always store CD/DVD discs out of direct sunlight and away from direct heat
sources
v Remove CD/DVD discs from the computer when not in use
v Do not bend or flex CD/DVD discs, or force them into the computer or their
packaging
v Check CD/DVD discs for cracks before each use. Do not use cracked or
damaged discs
General safety guidelines
ix
x
IBM M400 PROJECTOR: User’s Guide
Registering your option
Thank you for purchasing this IBM® product. Please take a few moments to
register your product and provide us with information that will help IBM to better
serve you in the future. Your feedback is valuable to us in developing products
and services that are important to you, as well as in developing better ways to
communicate with you. Register your option on the IBM Web site at
http://www.ibm.com/pc/register/
IBM will send you information and updates on your registered product unless you
indicate on the Web site questionnaire that you do not want to receive further
information.
© Copyright IBM Corp. 2004
xi
xii
IBM M400 PROJECTOR: User’s Guide
Chapter 1. Product description
The IBM M400 projector can be used for both business presentations and home
entertainment and is easy to connect, use, and maintain. Some main features of
this projector are:
v Extremely powerful, lightweight, and portable at 2.4 lbs (1.1kg).
1 Projector with lens cap
2 S-video cable
3 Power cord
4 Computer cable (DVI-DB15)
5 User’s guide (and installation) CD
6 Multi-language quick start guide
7 Carrying case
8 USB cable
9 Video cable (Mini Jack- RCA)
10 Audio cable (Mini Jack- RCA)
11 Batteries
12 Remote control
If any of the items listed above are missing or damaged, contact your place of
purchase.
Note: Be sure to retain your proof of purchase; it will be required to receive
warranty service.
For information on optional accessories for your projector, go to the
http://www.ibm.com.
Important:
v Avoid using the projector in dusty environments
v Leave the power cable plugged in (for 2-5 minutes) until the projector returns to
room temperature before placing the projector inside the soft case. Placing the
projector into the case too soon after switching off the power could cause the
projector to overheat and will shorten lamp life.
v Be sure to attach the lens cap and place the projector into the soft case with the
lens facing upward to avoid damaging the lens.
Chapter 1. Product description
1-3
Projector features
The figures below show the different angles and features of the projector.
Figure 1-2. Front angle of projector
1 Keypad
2 Remote control receiver (IR)
3 Speaker
4 Zoom
5 Elevator foot/leveling foot
6 Lens cap
7 Focus ring
1-4
IBM M400 PROJECTOR: User’s Guide
1 Elevator foot/leveling foot
2 Connectors
3 Remote control receiver (IR)
1 Power LED
2 Source/Left button
3 Menu button
4 Auto/Right button
5 Quick Menu/Down button
6 Power button
7 Status LED
1 Security slot
2 USB slot
3 Audio
4 Video mini-jack
5 DVI-I
6 AC socket
1 Front adjusters
2 Rear adjuster
3 Projection lamp cover
Chapter 2. Setting up the projector
This chapter provides information on positioning the projector, connecting a
computer source, using the projector with Microsoft Windows, and displaying and
adjusting a computer source image.
Starting and shutting down the projector
Please follow the steps below to start your projector, and to shut off the projector.
Attention: Before moving the projector, be sure to power down the projector
normally and disconnect the projector from the main power source.
1. Connect the power cord to the projector as shown in Figure 2-1. Connect the
other end to a wall outlet. The Power LED turns on.
Remove the lens cover.
Attach input devices.
Turn on the connected devices.
Ensure the Power LED is on a steady (not flashing) amber and then press the
Power button to turn on the projector. The projector splash screen displays and
connected devices are detected.
Attention: Do not look directly into the projection lens when the lamp is
turned on. The bright light might harm your eyes.
6. Use the appropriate appliance cable to connect to a video device.
7. To turn off the projector, press the Power button. The projector prepares for
shut-down and a ″Power off″ message appears, as shown below. The projector
turns off automatically within 5 seconds.
2.
3.
4.
5.
Note: This operation can be cancelled by pressing a button other than the
Power button. Pressing the Power button again will switch off power.
Note: Leave the power cable plugged in for at least 2-5 minutes until the
projector returns to room temperature before placing the projector inside
the soft case. Placing the projector into the case too soon after switching
off the power could cause the projector to overheat.
Attention: Before moving the projector, be sure to power down the projector
normally and disconnect the projector from the main power source.
Positioning the projector
To determine where to position the projector, consider the size and shape of your
screen, the location of your power outlets, and the distance between the projector
and the rest of your equipment. Following are some general guidelines:
v Position the projector on a flat surface at a right angle to the screen. The
projector must be at least 1.5 m (4.9 ft) from the projection screen.
v Position the projector within 2.7 m (9 ft) of your power source and within 1.8 m
(6 ft) of your video device (unless you purchase extension cables). To ensure
adequate cable access, do not place the projector within .15 m (6 in.) of a wall or
other object.
v Position the projector the desired distance from the screen. The distance from the
lens of the projector to the screen, the zoom setting, and the video format
determine the size of the projected image.
Figure 2-2.
2-2
IBM M400 PROJECTOR: User’s Guide
Table 2-1.
Diagonal screen
size
Image Width
Image height
Distance from
center of lens to
bottom of image
(m/ft)
(m/in.)
(m/ft)
(m/ft)
(m/ft)
1- to 1.20/- to
3.94
0.66/26
0.53/1.74
0.40/1.31
0.07/0.23
21.54 to
1.85/5.05 to 6.07
1.02/40
0.81/2.66
0.61/2
0.11/0.36
32.33 to
2.80/7.64 to 9.19
1.52/60
1.22/4
0.91/2.99
0.16/0.52
43.12 to
3.75/10.24 to
12.30
2.03/80
1.63/5.35
1.22/4
0.21/0.69
53.91 to
4.70/12.83 to
15.42
2.54/100
2.03/6.66
1.52/4.99
0.26/0.85
64.70 to
5.64/15.42 to
18.50
3.05/120
2.44/8
1.83/6
0.31/1.02
75.89 to
7.07/19.32 to
23.20
3.81/150
3.05/10
2.29/7.51
0.39/1.28
87.04 to
8.45/23.10 to
27.72
4.57/180
3.55/12
2.74/8.99
0.47/1.54
97.85 to
9.44/25.79 to
30.97
5.08/200
4.05/13.32
3.05/10
0.52/1.71
Zoom lens
operation range
Adjusting the projector level and height
To adjust the projector level and height, complete the following procedure:
1. To raise the height of the projector, lift the projector and press the
height-adjuster buttons. The elevator foot drops down.
2. To make minor adjustments to the height, rotate the elevator foot.
3. To lower the level of the projector, press the height-adjuster button and press
down on the top of the projector.
Chapter 2. Setting up the projector
2-3
Note:
v The projector table or stand should be level and sturdy.
v Position the projector so that it is perpendicular to the screen.
v Be sure cables are not in a place where they can cause the projector to be
knocked over.
Adjusting the image
To adjust the zoom, focus, and keystone for the image, complete the following
steps:
1. Twist the rings on the projector to adjust the zoom and focus, as shown below.
2. Use the Keystone buttons (on the remote only) to correct image-trapezoid
(wider top or bottom) effect. The Keystone buttons on the remote are shown
below.
2-4
IBM M400 PROJECTOR: User’s Guide
The keystone control appears on the OSD, as shown.
To adjust the keystone on the projector, press Quick Menu and select the
keystone submenu; then use the left/right buttons to adjust the keystone.
Image resolution
The XGA resolution of the projected image is 1024 x 768 (XGA). The projector is
compatible with screen resolutions up to 1280 x 1024 (SXGA). If your computer
screen resolution is higher than 1280 x 1024 (SXGA), reset it to a lower resolution
before you connect the projector.
Note: The image automatically expands 640 x 480 (VGA) and 800 x 600 (SVGA)
images to 1024 x 768 (XGA).
Adjusting the volume
To adjust the volume, please follow the steps below:
1. Press the Volume +/- buttons (shown below) on the projector or the remote
control. The volume control appears on the OSD.
2. Use the Volume +/- buttons to adjust the level. The remote volume control
buttons are shown below.
3. Press the Mute button (on the remote control only) to turn off the volume.
Press the Mute button again to turn off mute. Shown below is the OSD when
Mute is activated.
Chapter 2. Setting up the projector
2-5
2-6
IBM M400 PROJECTOR: User’s Guide
Chapter 3. Connecting devices to the projector
This chapter provides information on connecting devices to the M400 projector.
Connecting devices
Computers and video devices can be connected to the projector at the same time.
Check the user’s manual of the connecting device to confirm that it has the
appropriate output connector.
1
2
3
4
© Copyright IBM Corp. 2004
USB slot
Audio
Video mini-jack
DVI-I
3-1
3-2
IBM M400 PROJECTOR: User’s Guide
Chapter 4. Using the projector features
This chapter provides information on using the remote control, audio, keypad
buttons, and other projector features.
Using the remote control
The remote uses two provided AAA batteries. They are easily installed by sliding
the cover off the back of the remote, aligning the + and - ends of the batteries,
sliding them into place, and then replacing the cover.
CAUTION:
To reduce the risk of injury to the eyes, do not look directly into the remote
control laser light and do not point the laser light into anyone’s eyes. The
remote control is equipped with a Class II laser that emits radiation.
The figure below provides an illustration of the remote.
1 Laser
Inserting the remote control batteries
When using the remote control for the first time, install the batteries that were
supplied. Follow the steps below for inserting new batteries into your remote
control.
1. Remove the battery compartment cover by sliding the cover in the direction of
the arrow, as shown.
2. Insert the supplied batteries taking note of the polarity (+/-), as shown.
3. Replace the cover, as shown.
Note:
v Only use AAA alkaline batteries.
v Dispose of used batteries according to local government ordinance
regulations.
v Remove the batteries when not using the remote for prolonged periods.
4-2
IBM M400 PROJECTOR: User’s Guide
Operating range
This remote control uses infrared transmission to control the projector. It is not
necessary to point the remote directly at the projector. Provided you are not
holding the remote to the sides or the rear of the projector, the remote will function
within a maximum radius of 7m (22ft) and 30° above or below the projector level.
If the projector does not respond to the remote control, move a little closer.
Note: You can also point the remote at the projected image.
Projector and remote control buttons
The projector can be operated using the remote control or the buttons on the top of
the projector. All operations can be carried out with the remote control. The figure
below shows the corresponding buttons on the remote control and on the projector
for OSD menu operation.
4-4
IBM M400 PROJECTOR: User’s Guide
Chapter 5. On-Screen Display menu controls
This projector has an On-Screen Display (OSD) that lets you make image
adjustments and change various settings.
Note: You must have a display on the screen in order to access the OSD.
Navigating the OSD
You can use the remote control or the buttons on the top of the projector to
navigate and make changes to the OSD. The following sections show the menus in
the OSD.
Image menu
The image menu can be found through the main menu. To access the Image menu,
follow these steps:
1. Press the Menu button to open the main menu.
2. Press the cursor left/right button to move to the Image menu.
3. Press the cursor down button to move down in the Image menu. The Image
menu is shown below.
The following table shows the options that you will see in the Image menu and the
default.
Item
Description
Default
Brightness
Press the cursor left/right button 0
to adjust the brightness.
Range: -50 to 50
© Copyright IBM Corp. 2004
5-1
Item
Description
Default
Contrast
Press the cursor left/right button 0
to adjust the contrast.
Range: -50 to 50
Picture Adjustment
Press the cursor left/right button 0
to adjust the A/D sampling
number.
Range: -50 to 50
Fine Picture
Press the cursor left/right button Auto-detected
to adjust the A/D sampling
clock.
Range: -50 to 50
H Position
Press the cursor left/right button 0
to move the image left or right.
Range: -50 to 50
V Position
Press the cursor left/right button 0
to move the image up or down.
Range: -50 to 50
Color
Press the cursor left/right button 0
to adjust the video saturation.
Range: -50 to 50
Tint
Press the cursor left/right button 0
to adjust the video hue.
Range: -50 to 50
Sharpness
Press the cursor left/right button 0
to adjust the video sharpness.
Range: -50 to 50
Cancel
Press the enter button to reset
Brightness, Contrast,
3. Press the cursor up/down button to move within the Color menu. The color
menu is shown below.
The following table shows the options that you will see in the Color menu and the
default.
Item
Description
Default
Quick Color Adj.
Press the cursor left/right button Standard
to select different Color Adjust.
Range: Standard/Color/Custom
Gamma
Press the cursor left/right button Normal
to select different Gamma
Correction.
Range: Normal/Natural/Real
Color Temperature
Press the cursor left/right button Normal
to select different color
temperature.
Range:
Low/Middle/Normal/High
White
Press the cursor left/right button RGB: High
to select different white segment.
Video: Low
Range: Low/Middle/High
White Balance
Change White Balance Menu
Color Space
Press the cursor left/right button BT.709
to select different color space.
N/A
Range: BT.709/SMPTE240
Cancel
Reset Quick Color Adj., Gamma,
Color Temp., White, and Color
Space to default value.
N/A
Chapter 5. On-Screen Display menu controls
5-3
View menu
To access the View menu, follow the steps below:
1. Press the Menu button to open the main menu.
2. Press the cursor left/right button to move to the View menu.
3. Press the cursor up/down button to move up and down in the View menu.
The View menu is shown below.
The following table shows the options that you will see in the View menu and the
default.
Item
Description
Default
Aspect
Press the cursor left/right button Auto
to select different aspect ratio.
RGB Range: Auto/Direct/Rear
Video Range: Auto/Wide/Zoom
Filter
Press the cursor left/right button 3
to select different scaling filter.
Range: 1 to 5
Vertical Flip
Press the cursor left/right button Off
to select different vertical flip.
Range: Off/On
Horizontal Flip
Press the cursor left/right button Off
to select different horizontal flip.
Range: Off/On
Keystone
Press the cursor left/right button 0
to adjust the display keystone.
Range: -50 to 50
5-4
IBM M400 PROJECTOR: User’s Guide
Item
Description
Default
Keystone Save
Press the cursor left/right button On
to select keystone save.
Range: Off/On
Digital Zoom
Digital Zoom
N/A
Panning
Use the ↑,→,↓,← buttons to pan in
the Digitally zoomed image.
N/A
Cancel
Reset Aspect, Filter, Vertical Flip,
Horizontal Flip, Keystone, and
Keystone Save to default values.
N/A
Setup menu
To access the View menu, follow the steps below:
1. Press the Menu button to open the main menu.
2. Press the left/right cursor to move to the Setup menu.
3. Press the cursor up/down button to move up and down in the Setup menu.
The Setup menu is shown below.
The following table shows the options that you will see in the Setup menu and the
default.
Item
Description
Default
Auto Source
Press the cursor right/left button On
to select. This will automatically
search all of the input ports.
Range: On/Off
Chapter 5. On-Screen Display menu controls
5-5
Item
Description
Default
Auto Power Off
Press the cursor right/left button Off
to select. This will automatically
turn off the lamp when there is
no signal to the projector for 5
minutes.
Range: On/Off
Menu Position
Press the cursor left/right button Center
to select different OSD locations.
Range:
Left/Top/Center/Right/Bottom
Input Format
Change the input format menu.
Auto
Presentation Timer
Press the cursor left/right button Off
to select the time for the
presentation timer.
Range: Off/10 min/20 min/30
min/40 min/50 min/60 min
Cancel
Reset Auto Source, Auto Power
off, Menu Position, and
Presentation Timer to default
values.
N/A
Option menu
To access the Option menu, follow the steps below:
1. Press the Menu button to open the main menu
2. Press the cursor left/right button to move to the Option menu.
3. Press the cursor up/down button to move up and down within the Option
menu. The Option menu is shown below.
5-6
IBM M400 PROJECTOR: User’s Guide
The following table shows the options that you will see in the Option menu and
the default.
Item
Description
Default
Language
Change the Language
English
Range:
English/German/French/Italian/
Spanish/Swedish/Korean
/Simplified Chinese/
Traditional Chinese/Japanese
On Screen
Press the cursor left/right button On
to select the on-screen menu.
Range: On/Off
Background
Press the cursor left/right button Blue
to select background color.
Range: Blue/Black
Startup Screen
Press the cursor left/right button Logo
to select the startup screen.
Range: Logo/Blank
Cancel
Preset On Screen, Background,
and Startup Screen to default
values.
N/A
Information menu
To access the Information menu, follow the steps below:
1. Press the Menu button to open the main menu.
2. Press the cursor left/right button to move to the Info menu.
Chapter 5. On-Screen Display menu controls
5-7
3. Press the cursor up/down button to move up and down in the Info menu. The
Info menu is shown below.
The following table shows the options that you will see in the Info menu.
Item
Description
Factory Default
Change factory default message menu.
Lamp Timer Reset
Reset the lamp timer.
Resolution
Shows Resolution H/V format.
Frequency
Shows Frequency H/V information.
Lamp Timer
Shows lamp hours used information.
Version
Shows Firmware version information.
Sub Menus
This section describes the different sub menus in depth.
White Balance
White Balance is a menu for calibration purposes. Follow the steps below to use
the White Balance menu.
1. Start by finding a black pattern source from the computer.
5-8
IBM M400 PROJECTOR: User’s Guide
2. Press Enter to execute black adjustment.
3. Next, find a white pattern source from the computer.
4. Press Enter to execute a white adjustment.
5. The scree will now show ″White Balance Complete″ if the adjustment process
completes successfully.
Chapter 5. On-Screen Display menu controls
5-9
Input format
The image below shows the Input format menu.
The following table shows the options that you will see in the Input format menu
and the default.
Item
Description
Default
Input Format PC mode
Press the up/down button to
select the Input format.
Auto
Range:
Auto/RGB/Digital/Component
Input Format Video/S-Video
mode
Press the cursor up/down button Auto
to select the Input format.
Range:
Auto/NTSC/PAL/SECAM/
NTSC4.43/PAL M/PAL N/PAL
60
The default for the Input format is Auto. You will see the following image when
the projector is searching for the input video source.
5-10
IBM M400 PROJECTOR: User’s Guide
Language
The image below shows the Language menu. The default language is English.
Zoom
Press the cursor up/down button to use Digital Zoom.
Panning
Use the ↑,→,↓,← buttons to pan in the Digitally zoomed image.
Lamp Timer reset
Press the Enter button to reset the Lamp Timer.
Chapter 5. On-Screen Display menu controls
5-11
Factory default
Press the Enter button to restore default settings.
Hot Keys
This section shows the Hot Keys and describes their functions.
v Power off: Press the Power key to turn the projector off. Either wait for 5
seconds for the projector to automatically power off, or press the Power key
again for immediate shut off. The image displayed when the projector is
powering off is shown below.
v Keystone: Press the Keystone cursor +/- button (on the remote) to adjust the
display keystone. The range is -50 to 50.
v Volume: Press the Volume cursor +/- button (on the remote) to adjust the
volume. The range is 0 to 100.
v Freeze: Use the freeze key to freeze or unfreeze the image.
5-12
IBM M400 PROJECTOR: User’s Guide
Quick menu
This section is a quick reference guide for the following menu items.
v Brightness: Press the cursor left/right button to adjust the display brightness.
The range is -50 to 50.
v Contrast: Press the cursor left/right button to adjust the display contrast. The
range is -50 to 50.
v Volume: Press the cursor left/right button to adjust the volume. The range is 0
to 100.
v Keystone: Press the cursor left/right button to adjust the display keystone. The
range is -50 to 50.
Chapter 5. On-Screen Display menu controls
5-13
5-14
IBM M400 PROJECTOR: User’s Guide
Appendix A. Maintenance
This chapter provides information on projector maintenance.
Cleaning the lens
To clean the lens, complete the following procedure:
1. Apply a non-abrasive camera lens cleaner to a soft, dry cloth.
Note: Avoid using an excessive amount of cleaner, and do not apply the
cleaner directly to the lens. Abrasive cleaners, solvents or other harsh
chemicals might scratch the lens.
2. Lightly wipe the cleaning cloth over the lens in a circular motion. If you do not
intend to use the projector immediately, replace the lens cap.
Replacing the projector lamp
The projector lamp should only be replaced with an IBM certified replacement
part, which you can order from your business partner or go to www.ibm.com/pc.
To replace the projector lamp, complete the following procedure:
1. Turn off the projector, unplug the power cord, and allow the projector to cool
for at least 1 hour.
2. Use a Phillips-head screwdriver to remove the screw from the lamp
compartment cover as shown in 2.
3. Remove the lamp compartment cover as shown in 3.
4. Remove the two screws from the lamp module as shown in 4.
© Copyright IBM Corp. 2004
A-1
5. Lift the module handle up as shown in 5.
6. Pull firmly on the module handle to remove the lamp module as shown in 6.
4. Press the Enter button. The screen will show ″Press″ENTER″ to Lamp Timer
Reset″.
5. .Press the Enter button again to reset the lamp hours.
Using the security slot
The projector has a security slot, as shown. Refer to the information that comes
with the lock for instructions on how to use it.
Appendix A. Maintenance
A-3
A-4
IBM M400 PROJECTOR: User’s Guide
Appendix B. Troubleshooting
The following table provides troubleshooting information for the projector. In some
cases, more than one possible solution is provided. Try the solutions in the order
they are presented. When the problem is solved, you can skip the additional
solutions.
Table B-1. Troubleshooting
Problem
Solution
No image appears on the screen.
v Make sure your computer and projector are turned
on.
v If the Blank screen is shown, press the Blank button
on the remote control.
v Verify the settings on your notebook or desktop PC.
v Turn off all equipment and power up again in the
correct order. See “Starting and shutting down the
projector” on page 2-1.
The image is blurred
v Adjust the Focus on the projector. See “Adjusting the
image” on page 2-4.
v Press the Auto button on the remote control or the
projector.
v Ensure the projector-to-screen distance is within the
range specified.
The image is wider at the top or
bottom (trapezoid effect).
v Position the projector so it is as perpendicular to the
screen as possible.
v Use the Keystone button on the remote control or
projector to correct the problem. See “Adjusting the
image” on page 2-4.
The image is reversed or upside
down.
Check the Projection setting on the Setup menu of the
OSD. See “View menu” on page 5-4
The image is streaked.
v Set the Frequency and Tracking settings on the Setup
menu of the OSD to the default settings. See
“Navigating the OSD” on page 5-1.
v To ensure the problem is not caused by a connected
PC’s video card, connect to another computer.
The image is flat with no contrast Adjust the Contrast setting on the Main menu of the
OSD. See “Navigating the OSD” on page 5-1.
The color of the projected image
does not match the source image
© Copyright IBM Corp. 2004
Adjust the Color Temp. and Gamma settings on the
ColorMgr menu of the OSD. See “Color menu” on
page 5-2.
B-1
Table B-1. Troubleshooting (continued)
Problem
Solution
There is no light from the
projector
v Check that the power cable is securely connected.
v Ensure the power source is good by testing with
another electrical device.
v Restart the projector in the correct order and check
that the Power LED is green.
v If you have replaced the lamp recently, try resetting
the lamp connections. Make sure the lamp cover is
flush with the projector case when closed.
v Replace the lamp module. See “Replacing the
projector lamp” on page A-1.
v Put the old lamp back in the projector and have the
projector serviced.
The lamp goes off.
v Power surges can cause the lamp to turn off. Press
the Power button twice to turn off the projector.
When the Lamp Ready LED is on, press the Power
button.
v Replace with a new lamp module. See “Replacing
the projector lamp” on page A-1.
v Put the old lamp back in the projector and have the
projector serviced.
The projector does not respond to v Direct the remote control towards the front or rear
the remote control.
remote sensors on the projector.
v Ensure the path between remote and sensor is not
obstructed.
v Turn off any fluorescent lights in the room.
v Check the battery polarity.
v Replace the batteries.
v Turn off other Infrared-enabled devices in the
vicinity.
v Have the remote control serviced.
There is no sound.
v Adjust the volume on the remote control.
v See “Adjusting the volume” on page 2-5.
v Adjust the volume of the audio source.
v Check the audio cable connection.
v Test the source audio output with other speakers.
v Have the projector serviced.
The sound is distorted.
v Check the audio cable connection.
v Test the source audio output with other speakers.
v Have the projector serviced.
B-2
IBM M400 PROJECTOR: User’s Guide
Projector LEDs
The LEDs on top of the projector indicates the state of the projector and can help
you troubleshoot.
Table B-2. Projector LED behavior and projector errors
LED behavior
Explanation
Lit red
It is time to replace the lamp. Replace with a new
lamp cartridge. See “Replacing the projector lamp”
on page A-1 for more information.
When the power is on (Lit green)
Standby (Lit amber)
Lit red
The lamp has reached the end of its service life.
The power will no longer turn on.
Flashing amber for 60 seconds, then lit
amber
The projector can be used for 100 hours after the
lamp has reached the end of its service life.
Replace with a new lamp cartridge. See “Replacing
the projector lamp” on page A-1.
Flashing red (lit for 1 second/off for 1 The lamp cover is open.
second)
The lamp cover is not properly mounted. Mount it
Lit red
properly.
Flashing red (lit for 0.5 seconds/off
for 0.5 seconds)
Lit red
The temperature is abnormally high.
v The temperature protector has been activated. If
the room temperature is high, move the
projector to a cool place. If the projector’s
internal temperature is high, check the cooling
fan’s ventilation slots and clean them if they are
clogged.
v When the temperature protector is activated, the
power turns off and in some cases will not turn
back on immediately. In this case wait 90
seconds, then try again.
Flashing red (lit for 0.5 seconds/off
for 0.5 seconds)
Lit amber
The fan has stopped.
Unplug the power cable and contact a store that
sells the IBM M400 PROJECTOR for repairs.
Flashing red (lit for 1 second/off for 1 The lamp will not light.
second)
Wait at least 90 seconds, then turn the power back
When the lamp has burned out
on. If the problem persists, unplug the power cable
during use
and contact a store that sells the IBM M400
PROJECTOR for repairs.
Flashing amber for 90 seconds, then lit
amber
When the lamp does not come on
from the start
Lit amber
Note: If the projector LEDs flash in a manner that is not addressed above, unplug
the power cable and contact your retailer.
Appendix B. Troubleshooting
B-3
Thermal protector
When the temperature inside the projector becomes abnormally high, the LED
indicator flashes red (0.5 seconds on/0.5 seconds off) the Standby indicator is a
steady red, and at the same time the temperature protector operates and switches
off the power of the projector. If this happens, please follow the steps below:
1. Switch off the power and disconnected the power plug from the wall outlet.
2. Check the temperature of the room. If the projector is being used in a location
with a high ambient temperature, set it up in a cooler location.
3. Check the vent openings to make sure that they are all clear. Clean the vent
openings if they are obstructed.
4. Wait at least 1 hour until the temperature of the projector drops, then plug it in
again.
5. If you are still having the same problem, please contact your retailer.
B-4
IBM M400 PROJECTOR: User’s Guide
Appendix C. Specifications
Following are specifications for the IBM M400 projector.
Temperature
5° to 35° C (41° to 95° F) at sea level
(non-operating)
-10° to 60° C (14° to 140° F)
Altitude (operating)
3,048 m (0 to 10,000 ft)
Altitude (non-operating)
12,192 m (0 to 40,000 ft)
Humidity (operating)
5% to 90% relative humidity, non-condensing
Humidity (non-operating)
5% to 95% relative humidity, non-condensing
Dimensions
183 x 163 x 48 mm (7.2 x 6.4 x 1.9 in.)
Weight
1.1 kg (2.4 lbs) unpacked
Optics (focus range)
1.2 - 9.4 m (4 to 31 ft)
Lamp type
114 W lamp
Input power requirements
100-240V 1.8A 50/60 Hz
© Copyright IBM Corp. 2004
C-1
C-2
IBM M400 PROJECTOR: User’s Guide
Appendix D. Service and Support
The following information describes the technical support that is available for your
product, during the warranty period or throughout the life of the product. Refer to
your IBM Statement of Limited Warranty for a full explanation of IBM warranty
terms.
Online technical support
Online technical support is available during the life of your product through the
Personal Computing Support Web site at www.ibm.com/pc/support.
During the warranty period, assistance for replacement or exchange of defective
components is available. In addition, if your IBM option is installed in an IBM
computer, you might be entitled to service at your location. Your technical support
representative can help you determine the best alternative.
Telephone technical support
Installation and configuration support through the IBM Support Center will be
withdrawn or made available for a fee, at IBM’s discretion, 90 days after the option
has been withdrawn from marketing. Additional support offerings, including
step-by-step installation assistance, are available for a nominal fee.
To assist the technical support representative, have available as much of the
following information as possible:
v Option name
v
v
v
v
v
v
Option number
Proof of purchase
Computer manufacturer, model, serial number (if IBM), and manual
Exact wording of the error message (if any)
Description of the problem
Hardware and software configuration information for your system
If possible, be at your computer. Your technical support representative might want
to walk you through the problem during the call.
For the support telephone number and support hours by country, refer to the
following table. If the number for your country or region is not listed, contact your
IBM reseller or IBM marketing representative. Response time may vary depending
on the number and nature of the calls received.
Phone numbers are subject to change without notice. For the latest phone number
list, go to www.ibm.com/pc/support and click Support Phone List.
Country or Region
Telephone Number
Country or Region
Telephone Number
Argentina
0800-666-0011
Malaysia
03-7727-7800
Australia
1300-130-426
Mexico
001-866-434-2080
Austria
01-24592-5901
Netherlands
020-514-5770
© Copyright IBM Corp. 2004
D-1
Country or Region
Telephone Number
Country or Region
Telephone Number
Belgium
Dutch 02-210-9820
New Zealand
0800-446-149
French 02-210-9800
Bolivia
0800-0189
Norway
66 81 11 00
Brazil
55-11-3889-8986
Peru
0-800-50-866
Canada
1-800-565-3344
Philippines
632-995-2225
Toronto 416-383-3344
Chile
800-224-488
Portugal
21-791 51 47
China (PRC)
800-810-1818
Russia
095-940-2000
China (Hong Kong
S.A.R.)
852-2825-7799
Singapore
1800-840-9911
Columbia
980-912-3021
Spain
91-662 49 16
Denmark
45 20 82 00
Sweden
08-477 4420
Ecuador
1-800-426911 (option
#4)
Switzerland
058-333-09-00
Finland
09-459 69 60
Taiwan
886-2-2725-9799
France
02 38 55 74 50
Thailand
66-2-273-4000
Germany
07032-1549 201
Turkey
00-800-446-32-041
Indonesia
021-523-8535
United Kingdom
0-1475-555 055
Ireland
01-815-9202
United States
1-800-426-7378
Italy
02-7031-6101
Uruguay
000-411-005-6649
Japan
Consumer customers
0120-887-870
Venezuela
0-800-100-2011
Vietnam
848-8295-160
Business customers
0120-887-874
Luxembourg
D-2
IBM M400 PROJECTOR: User’s Guide
298-977 5063
Appendix E. IBM Statement of Limited Warranty Z125-4753-07 - 11/2002
Part 1 - General Terms
This Statement of Limited Warranty includes Part 1 - General Terms, Part 2 Country-unique Terms, and Part 3 - Warranty Information. The terms of Part 2 replace or
modify those of Part 1. The warranties provided by IBM in this Statement of Limited
Warranty apply only to Machines you purchase for your use, and not for resale. The term
″Machine″ means an IBM machine, its features, conversions, upgrades, elements, or
accessories, or any combination of them. The term ″Machine″ does not include any software
programs, whether pre-loaded with the Machine, installed subsequently or otherwise.
Nothing in this Statement of Limited Warranty affects any statutory rights of
consumers that cannot be waived or limited by contract.
What this Warranty Covers
IBM warrants that each Machine 1) is free from defects in materials and
workmanship and 2) conforms to IBM’s Official Published Specifications
(″Specifications″) which are available on request. The warranty period for the
Machine starts on the original Date of Installation and is specified in Part 3 Warranty Information. The date on your invoice or sales receipt is the Date of
Installation unless IBM or your reseller informs you otherwise. Many features,
conversions, or upgrades involve the removal of parts and their return to IBM. A
part that replaces a removed part will assume the warranty service status of the
removed part. Unless IBM specifies otherwise, these warranties apply only in the
country or region in which you purchased the Machine.
THESE WARRANTIES ARE YOUR EXCLUSIVE WARRANTIES AND REPLACE
ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR
CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. SOME STATES OR JURISDICTIONS DO NOT ALLOW THE
EXCLUSION OF EXPRESS OR IMPLIED WARRANTIES, SO THE ABOVE
EXCLUSION MAY NOT APPLY TO YOU. IN THAT EVENT, SUCH
WARRANTIES ARE LIMITED IN DURATION TO THE WARRANTY PERIOD.
NO WARRANTIES APPLY AFTER THAT PERIOD. SOME STATES OR
JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG AN
IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT
APPLY TO YOU.
What this Warranty Does not Cover
This warranty does not cover the following:
v any software programs, whether pre-loaded or shipped with the Machine, or
installed subsequently;
v failure resulting from misuse (including but not limited to use of any Machine
capacity or capability, other than that authorized by IBM in writing), accident,
modification, unsuitable physical or operating environment, or improper
maintenance by you;
v failure caused by a product for which IBM is not responsible; and
© Copyright IBM Corp. 2004
E-1
v
any non-IBM products, including those that IBM may procure and provide with
or integrate into an IBM Machine at your request.
The warranty is voided by removal or alteration of identification labels on the
Machine or its parts.
IBM does not warrant uninterrupted or error-free operation of a Machine.
Any technical or other support provided for a Machine under warranty, such as
assistance via telephone with ″how-to″ questions and those regarding Machine
set-up and installation, is provided WITHOUT WARRANTIES OF ANY KIND.
How to Obtain Warranty Service
If the Machine does not function as warranted during the warranty period, contact
IBM or your reseller to obtain warranty service. If you do not register the Machine
with IBM, you may be required to present proof of purchase as evidence of your
entitlement to warranty service.
What IBM Will Do to Correct Problems
When you call for service, you must follow the problem determination and
resolution procedures that IBM specifies. A technician will attempt to make an
initial diagnosis of your problem and help you resolve it over the telephone.
The type of warranty service applicable to your Machine is specified in Part 3 Warranty Information.
You are responsible for downloading and installing designated Machine Code
(microcode, basic input/output system code (called ″BIOS″), utility programs,
device drivers, and diagnostics delivered with an IBM Machine) and other
software updates from an IBM Internet Web site or from other electronic media,
and following the instructions that IBM provides.
If your problem can be resolved with a Customer Replaceable Unit (″CRU″) (e.g.,
keyboard, mouse, speaker, memory, hard disk drive and other easily replaceable
parts), IBM will ship these parts to you for replacement by you.
If the Machine does not function as warranted during the warranty period and
your problem cannot be resolved over the telephone, through your application of
Machine Code or software updates, or with a CRU, IBM or your reseller, if
approved by IBM to provide warranty service, will either, at its discretion, 1) repair
it to make it function as warranted, or 2) replace it with one that is at least
functionally equivalent. If IBM is unable to do either, you may return the Machine
to your place of purchase and your money will be refunded.
IBM or your reseller will also manage and install selected engineering changes that
apply to the Machine.
Exchange of a Machine or Part
When the warranty service involves the exchange of a Machine or part, the item
IBM or your reseller replaces becomes its property and the replacement becomes
yours. You represent that all removed items are genuine and unaltered. The
replacement may not be new, but will be in good working order and at least
E-2
IBM M400 PROJECTOR: User’s Guide
functionally equivalent to the item replaced. The replacement assumes the
warranty service status of the replaced item.
Your Additional Responsibilities
Before IBM or your reseller exchanges a Machine or part, you agree to remove all
features, parts, options, alterations, and attachments not under warranty service.
You also agree to:
1. ensure that the Machine is free of any legal obligations or restrictions that
prevent its exchange;
2. obtain authorization from the owner to have IBM or your reseller service a
Machine that you do not own; and
3. where applicable, before service is provided:
a. follow the service request procedures that IBM or your reseller provides;
b. backup or secure all programs, data, and funds contained in the Machine;
c. IBM or your reseller with sufficient, free, and safe access to your facilities to
permit IBM to fulfill its obligations; and
d. inform IBM or your reseller of changes in the Machine’s location.
4. (a) ensure all information about identified or identifiable individuals (Personal
Data) is deleted from the Machine (to the extent technically possible), (b) allow
IBM, your reseller or an IBM supplier to process on your behalf any remaining
Personal Data as IBM or your reseller considers necessary to fulfill its
obligations under this Statement of Limited Warranty (which may include
shipping the Machine for such processing to other IBM service locations around
the world), and (c) ensure that such processing complies with any laws
applicable to such Personal Data.
Limitation of Liability
IBM is responsible for loss of, or damage to, your Machine only while it is 1) in
IBM’s possession or 2) in transit in those cases where IBM is responsible for the
transportation charges.
Neither IBM nor your reseller are responsible for any of your confidential,
proprietary or personal information contained in a Machine which you return to
IBM for any reason. You should remove all such information from the Machine
prior to its return.
Circumstances may arise where, because of a default on IBM’s part or other
liability, you are entitled to recover damages from IBM. In each such instance,
regardless of the basis on which you are entitled to claim damages from IBM
(including fundamental breach, negligence, misrepresentation, or other contract or
tort claim), except for any liability that cannot be waived or limited by applicable
laws, IBM is liable for no more than
1. damages for bodily injury (including death) and damage to real property and
tangible personal property; and
2. the amount of any other actual direct damages, up to the charges (if recurring,
12 months’ charges apply) for the Machine that is subject of the claim. For
purposes of this item, the term ″Machine″ includes Machine Code and Licensed
Internal Code (″LIC″).
Appendix E. IBM Statement of Limited Warranty - Z125-4753-07 - 11/2002
E-3
This limit also applies to IBM’s suppliers and your reseller. It is the maximum for
which IBM, its suppliers, and your reseller are collectively responsible.
UNDER NO CIRCUMSTANCES IS IBM, ITS SUPPLIERS OR RESELLERS
LIABLE FOR ANY OF THE FOLLOWING EVEN IF INFORMED OF THEIR
POSSIBILITY: 1) THIRD PARTY CLAIMS AGAINST YOU FOR DAMAGES
(OTHER THAN THOSE UNDER THE FIRST ITEM LISTED ABOVE); 2) LOSS
OF, OR DAMAGE TO, DATA; 3) SPECIAL, INCIDENTAL, OR INDIRECT
DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES; OR 4)
LOST PROFITS, BUSINESS REVENUE, GOODWILL OR ANTICIPATED
SAVINGS. SOME STATES OR JURISDICTIONS DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY
TO YOU. SOME STATES OR JURISDICTIONS DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE
ABOVE LIMITATION MAY NOT APPLY TO YOU.
Governing Law
Both you and IBM consent to the application of the laws of the country in which
you acquired the Machine to govern, interpret, and enforce all of your and IBM’s
rights, duties, and obligations arising from, or relating in any manner to, the
subject matter of this Statement of Limited Warranty, without regard to conflict of
law principles.
THESE WARRANTIES GIVE YOU SPECIFIC LEGAL RIGHTS AND YOU MAY
ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE OR
JURISDICTION TO JURISDICTION.
Jurisdiction
All of our rights, duties, and obligations are subject to the courts of the country in
which you acquired the Machine.
Part 2 - Country-unique Terms
AMERICAS
ARGENTINA
Governing Law: The following is added after the first sentence:
Any litigation arising from this Statement of Limited Warranty will be settled
exclusively by the Ordinary Commercial Court of the city of Buenos Aires.
BRAZIL
Governing Law: The following is added after the first sentence:
Any litigation arising from this Statement of Limited Warranty will be settled
exclusively by the court of Rio de Janeiro, RJ.
Peru
Limitation of Liability: The following is added at the end of this section:
E-4
IBM M400 PROJECTOR: User’s Guide
Arbitration: The following is added under this heading:
Disputes arising out of or in connection with this Statement of Limited Warranty
shall be finally settled by arbitration which shall be held in Singapore in
accordance with the Arbitration Rules of Singapore International Arbitration Center
(″SIAC Rules″) then in effect. The arbitration award shall be final and binding for
the parties without appeal and shall be in writing and set forth the findings of fact
and the conclusions of law.
The number of arbitrators shall be three, with each side to the dispute being
entitled to appoint one arbitrator. The two arbitrators appointed by the parties
shall appoint a third arbitrator who shall act as chairman of the proceedings.
Vacancies in the post of chairman shall be filled by the president of the SIAC.
Other vacancies shall be filled by the respective nominating party. Proceedings
shall continue from the stage they were at when the vacancy occurred.
If one of the parties refuses or otherwise fails to appoint an arbitrator within 30
days of the date the other party appoints its, the first appointed arbitrator shall be
the sole arbitrator, provided that the arbitrator was validly and properly
appointed.
All proceedings shall be conducted, including all documents presented in such
proceedings, in the English language. The English language version of this
Statement of Limited Warranty prevails over any other language version.
HONG KONG S.A.R. OF CHINA AND MACAU S.A.R. OF CHINA
Governing Law: The following replaces “laws of the country in which you acquired the
Machine” in the first sentence:
laws of Hong Kong Special Administrative Region of China.
INDIA
Limitation of Liability: The following replaces items 1 and 2 of this Section:
1. liability for bodily injury (including death) or damage to real property and
tangible personal property will be limited to that caused by IBM’s negligence;
and
2. as to any other actual damage arising in any situation involving
nonperformance by IBM pursuant to, or in any way related to the subject of
this Statement of Limited Warranty, the charge paid by you for the individual
Machine that is the subject of the claim. For purposes of this item, the term
″Machine″ includes Machine Code and Licensed Internal Code (″LIC″).
Arbitration: The following is added under this heading :
Disputes arising out of or in connection with this Statement of Limited Warranty
shall be finally settled by arbitration which shall be held in Bangalore, India in
accordance with the laws of India then in effect. The arbitration award shall be
final and binding for the parties without appeal and shall be in writing and set
forth the findings of fact and the conclusions of law.
The number of arbitrators shall be three, with each side to the dispute being
entitled to appoint one arbitrator. The two arbitrators appointed by the parties
shall appoint a third arbitrator who shall act as chairman of the proceedings.
Vacancies in the post of chairman shall be filled by the president of the Bar
Council of India. Other vacancies shall be filled by the respective nominating party.
Proceedings shall continue from the stage they were at when the vacancy occurred.
E-6
IBM M400 PROJECTOR: User’s Guide
If one of the parties refuses or otherwise fails to appoint an arbitrator within 30
days of the date the other party appoints its, the first appointed arbitrator shall be
the sole arbitrator, provided that the arbitrator was validly and properly
appointed.
All proceedings shall be conducted, including all documents presented in such
proceedings, in the English language. The English language version of this
Statement of Limited Warranty prevails over any other language version.
JAPAN
Governing Law: The following sentence is added to this section:
Any doubts concerning this Statement of Limited Warranty will be initially
resolved between us in good faith and in accordance with the principle of mutual
trust.
MALAYSIA
Limitation of Liability: The word ″SPECIAL″ in item 3 of the fifth paragraph is deleted.
NEW ZEALAND
What this Warranty Covers: The following paragraph is added to this section:
The warranties specified in this section are in addition to any rights you may have
under the Consumer Guarantees Act 1993 or other legislation which cannot be
excluded or limited. The Consumer Guarantees Act 1993 will not apply in respect
of any goods which IBM provides, if you require the goods for the purposes of a
business as defined in that Act.
Limitation of Liability: The following is added to this section:
Where Machines are not acquired for the purposes of a business as defined in the
Consumer Guarantees Act 1993, the limitations in this section are subject to the
limitations in that Act.
PEOPLE’S REPUBLIC OF CHINA (PRC)
Governing Law: The following replaces ″laws of the country in which you acquired
the Machine″ in the first sentence:
laws of the State of New York, United States of America (except when local law
requires otherwise).
PHILIPPINES
Limitation of Liability: Item 3 in the fifth paragraph is replaced by the following:
SPECIAL (INCLUDING NOMINAL AND EXEMPLARY DAMAGES), MORAL,
INCIDENTAL, OR INDIRECT DAMAGES FOR ANY ECONOMIC
CONSEQUENTIAL DAMAGES; OR
Arbitration: The following is added under this heading
Disputes arising out of or in connection with this Statement of Limited Warranty
shall be finally settled by arbitration which shall be held in Metro Manila,
Philippines in accordance with the laws of the Philippines then in effect. The
Appendix E. IBM Statement of Limited Warranty - Z125-4753-07 - 11/2002
E-7
arbitration award shall be final and binding for the parties without appeal and
shall be in writing and set forth the findings of fact and the conclusions of law.
The number of arbitrators shall be three, with each side to the dispute being
entitled to appoint one arbitrator. The two arbitrators appointed by the parties
shall appoint a third arbitrator who shall act as chairman of the proceedings.
Vacancies in the post of chairman shall be filled by the president of the Philippine
Dispute Resolution Center, Inc. Other vacancies shall be filled by the respective
nominating party. Proceedings shall continue from the stage they were at when the
vacancy occurred.
If one of the parties refuses or otherwise fails to appoint an arbitrator within 30
days of the date the other party appoints its, the first appointed arbitrator shall be
the sole arbitrator, provided that the arbitrator was validly and properly
appointed.
All proceedings shall be conducted, including all documents presented in such
proceedings, in the English language. The English language version of this
Statement of Limited Warranty prevails over any other language version.
SINGAPORE
Limitation of Liability: The words ″SPECIAL″ and ″ECONOMIC″ in item 3 in the
fifth paragraph are deleted.
EUROPE, MIDDLE EAST, AFRICA (EMEA)
THE FOLLOWING TERMS APPLY TO ALL EMEA COUNTRIES:
The terms of this Statement of Limited Warranty apply to Machines purchased
from IBM or an IBM reseller.
How to Obtain Warranty Service: If you purchase a Machine in Austria, Belgium,
Cyprus, Denmark, Estonia, Finland, France, Germany, Greece, Iceland, Ireland,
Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Monaco, Netherlands, Norway,
Portugal, Spain, San Marino, Sweden, Switzerland, United Kingdom or Vatican
State, you may obtain warranty service for that Machine in any of those countries
from either (1) an IBM reseller approved to perform warranty service or (2)
Add the following paragraph in Western Europe (Austria, Belgium, Cyprus, Denmark,
Finland, France, Germany, Greece, Iceland, Ireland, Italy, Liechtenstein, Luxembourg,
Monaco, Netherlands, Norway, Portugal, Spain, San Marino, Sweden, Switzerland, United
Kingdom, Vatican State):
The warranty for Machines acquired in Western Europe shall be valid and
applicable in all Western Europe countries provided the Machines have been
announced and made available in such countries.
Governing Law:
The phrase ″the laws of the country in which you acquired the Machine″ is replaced
by:
1) ″the laws of Austria″ in Albania, Armenia, Azerbaijan, Belarus,
Bosnia-Herzegovina, Bulgaria, Croatia, Georgia, Hungary, Kazakhstan,
Kyrgyzstan, FYR Macedonia, Moldova, Poland, Romania, Russia, Slovakia,
Slovenia, Tajikistan, Turkmenistan, Ukraine, Uzbekistan, and FR Yugoslavia; 2)
″the laws of France″ in Algeria, Benin, Burkina Faso, Cameroon, Cape Verde,
Central African Republic, Chad, Comoros, Congo Republic, Djibouti, Democratic
Republic of Congo, Equatorial Guinea, French Guiana, French Polynesia, Gabon,
Gambia, Guinea, Guinea-Bissau, Ivory Coast, Lebanon, Madagascar, Mali,
Mauritania, Mauritius, Mayotte, Morocco, New Caledonia, Niger, Reunion,
Senegal, Seychelles, Togo, Tunisia, Vanuatu, and Wallis & Futuna; 3) ″the laws of
Finland″ in Estonia, Latvia, and Lithuania; 4) ″the laws of England″ in Angola,
Bahrain, Botswana, Burundi, Egypt, Eritrea, Ethiopia, Ghana, Jordan, Kenya,
Kuwait, Liberia, Malawi, Malta, Mozambique, Nigeria, Oman, Pakistan, Qatar,
Rwanda, Sao Tome, Saudi Arabia, Sierra Leone, Somalia, Tanzania, Uganda,
United Arab Emirates, the United Kingdom, West Bank/Gaza, Yemen, Zambia,
and Zimbabwe; and 5) ″the laws of South Africa″ in South Africa, Namibia,
Lesotho and Swaziland.
Jurisdiction: The following exceptions are added to this section:
1) In Austria the choice of jurisdiction for all disputes arising out of this Statement
of Limited Warranty and relating thereto, including its existence, will be the
competent court of law in Vienna, Austria (Inner-City); 2) in Angola, Bahrain,
Botswana, Burundi, Egypt, Eritrea, Ethiopia, Ghana, Jordan, Kenya, Kuwait,
Liberia, Malawi, Malta, Mozambique, Nigeria, Oman, Pakistan, Qatar, Rwanda,
Sao Tome, Saudi Arabia, Sierra Leone, Somalia, Tanzania, Uganda, United Arab
Emirates, West Bank/Gaza, Yemen, Zambia, and Zimbabwe all disputes arising
out of this Statement of Limited Warranty or related to its execution, including
summary proceedings, will be submitted to the exclusive jurisdiction of the English
courts; 3) in Belgium and Luxembourg, all disputes arising out of this Statement
of Limited Warranty or related to its interpretation or its execution, the law, and
the courts of the capital city, of the country of your registered office and/or
commercial site location only are competent; 4) in France, Algeria, Benin, Burkina
Faso, Cameroon, Cape Verde, Central African Republic, Chad, Comoros, Congo
Republic, Djibouti, Democratic Republic of Congo, Equatorial Guinea, French
Guiana, French Polynesia, Gabon, Gambia, Guinea, Guinea-Bissau, Ivory Coast,
Lebanon, Madagascar, Mali, Mauritania, Mauritius, Mayotte, Morocco, New
Caledonia, Niger, Reunion, Senegal, Seychelles, Togo, Tunisia, Vanuatu, and
Wallis & Futuna all disputes arising out of this Statement of Limited Warranty or
related to its violation or execution, including summary proceedings, will be
settled exclusively by the Commercial Court of Paris; 5) in Russia, all disputes
arising out of or in relation to the interpretation, the violation, the termination, the
Appendix E. IBM Statement of Limited Warranty - Z125-4753-07 - 11/2002
E-9
nullity of the execution of this Statement of Limited Warranty shall be settled by
Arbitration Court of Moscow; 6) in South Africa, Namibia, Lesotho and
Swaziland, both of us agree to submit all disputes relating to this Statement of
Limited Warranty to the jurisdiction of the High Court in Johannesburg; 7) in
Turkey all disputes arising out of or in connection with this Statement of Limited
Warranty shall be resolved by the Istanbul Central (Sultanahmet) Courts and
Execution Directorates of Istanbul, the Republic of Turkey; 8) in each of the
following specified countries, any legal claim arising out of this Statement of
Limited Warranty will be brought before, and settled exclusively by, the competent
court of a) Athens for Greece, b) Tel Aviv-Jaffa for Israel, c) Milan for Italy, d)
Lisbon for Portugal, and e) Madrid for Spain; and 9) in the United Kingdom, both
of us agree to submit all disputes relating to this Statement of Limited Warranty to
the jurisdiction of the English courts.
Arbitration: The following is added under this heading:
In Albania, Armenia, Azerbaijan, Belarus, Bosnia-Herzegovina, Bulgaria, Croatia,
Georgia, Hungary, Kazakhstan, Kyrgyzstan, FYR Macedonia, Moldova, Poland,
Romania, Russia, Slovakia, Slovenia, Tajikistan, Turkmenistan, Ukraine,
Uzbekistan, and FR Yugoslavia all disputes arising out of this Statement of
Limited Warranty or related to its violation, termination or nullity will be finally
settled under the Rules of Arbitration and Conciliation of the International Arbitral
Center of the Federal Economic Chamber in Vienna (Vienna Rules) by three
arbitrators appointed in accordance with these rules. The arbitration will be held in
Vienna, Austria, and the official language of the proceedings will be English. The
decision of the arbitrators will be final and binding upon both parties. Therefore,
pursuant to paragraph 598 (2) of the Austrian Code of Civil Procedure, the parties
expressly waive the application of paragraph 595 (1) figure 7 of the Code. IBM
may, however, institute proceedings in a competent court in the country of
installation.
In Estonia, Latvia and Lithuania all disputes arising in connection with this
Statement of Limited Warranty will be finally settled in arbitration that will be
held in Helsinki, Finland in accordance with the arbitration laws of Finland then in
effect. Each party will appoint one arbitrator. The arbitrators will then jointly
appoint the chairman. If arbitrators cannot agree on the chairman, then the Central
Chamber of Commerce in Helsinki will appoint the chairman.
EUROPEAN UNION (EU)
THE FOLLOWING TERMS APPLY TO ALL EU COUNTRIES:
Consumers have legal rights under applicable national legislation governing the
sale of consumer goods. Such rights are not affected by the warranties provided in
this Statement of Limited Warranty.
How to Obtain Warranty Service: The following is added to this section:
To obtain warranty service from IBM in EU countries, see the telephone listing in
Part 3 - Warranty Information.
You may contact IBM at the following address:
IBM Warranty & Service Quality Dept.
PO Box 30
E-10
IBM M400 PROJECTOR: User’s Guide
Spango Valley
Greenock
Scotland PA 16 OAH
AUSTRIA, DENMARK, FINLAND, GREECE, ITALY, NETHERLANDS,
PORTUGAL, SPAIN, SWEDEN AND SWITZERLAND
Limitation of Liability: The following replaces the terms of this section in its entirety:
Except as otherwise provided by mandatory law:
1. IBM’s liability for any damages and losses that may arise as a consequence of
the fulfillment of its obligations under or in connection with this Statement of
Limited Warranty or due to any other cause related to this Statement of
Limited Warranty is limited to the compensation of only those damages and
losses proved and actually arising as an immediate and direct consequence of
the non-fulfillment of such obligations (if IBM is at fault) or of such cause, for a
maximum amount equal to the charges you paid for the Machine. For purposes
of this item, the term ″Machine″ includes Machine Code and Licensed Internal
Code (″LIC″).
The above limitation shall not apply to damages for bodily injuries (including
death) and damages to real property and tangible personal property for which
IBM is legally liable.
2. UNDER NO CIRCUMSTANCES IS IBM, ITS SUPPLIERS OR RESELLERS
LIABLE FOR ANY OF THE FOLLOWING, EVEN IF INFORMED OF THEIR
POSSIBILITY: 1) LOSS OF, OR DAMAGE TO, DATA; 2) INCIDENTAL OR
INDIRECT DAMAGES, OR FOR ANY ECONOMIC CONSEQUENTIAL
DAMAGES; 3) LOST PROFITS, EVEN IF THEY ARISE AS AN IMMEDIATE
CONSEQUENCE OF THE EVENT THAT GENERATED THE DAMAGES;
OR 4) LOSS OF BUSINESS, REVENUE, GOODWILL, OR ANTICIPATED
SAVINGS.
FRANCE AND BELGIUM
Limitation of Liability: The following replaces ther terms of this section in its entirety:
Except as otherwise provided by mandatory law:
1. IBM’s liability for any damages and losses that may arise as a consequence of
the fulfillment of its obligations under or in connection with this Statement of
Limited Warranty is limited to the compensation of only those damages and
losses proved and actually arising as an immediate and direct consequence of
the non-fulfillment of such obligations (if IBM is at fault), for a maximum
amount equal to the charges you paid for the Machine that has caused the
damages. For purposes of this item, the term ″Machine″ includes Machine Code
and Licensed Internal Code (″LIC″).
The above limitation shall not apply to damages for bodily injuries (including
death) and damages to real property and tangible personal property for which
IBM is legally liable.
2. UNDER NO CIRCUMSTANCES IS IBM, ITS SUPPLIERS OR RESELLERS
LIABLE FOR ANY OF THE FOLLOWING, EVEN IF INFORMED OF THEIR
POSSIBILITY: 1) LOSS OF, OR DAMAGE TO, DATA; 2) INCIDENTAL OR
INDIRECT DAMAGES, OR FOR ANY ECONOMIC CONSEQUENTIAL
DAMAGES; 3) LOST PROFITS, EVEN IF THEY ARISE AS AN IMMEDIATE
Appendix E. IBM Statement of Limited Warranty - Z125-4753-07 - 11/2002
E-11
CONSEQUENCE OF THE EVENT THAT GENERATED THE DAMAGES;
OR 4) LOSS OF BUSINESS, REVENUE, GOODWILL, OR ANTICIPATED
SAVINGS.
THE FOLLOWING TERMS APPLY TO THE COUNTRY SPECIFIED:
AUSTRIA
What this Warranty Covers: The following replaces the first sentence of the first
paragraph of this section:
The warranty for an IBM Machine covers the functionality of the Machine for its
normal use and the Machine’s conformity to its Specifications.
The following paragraphs are added to this Section:
The minimum warranty period for Machines is 12 months from the date of
delivery. . The limitation period for consumers in action for breach of warranty is
the statutory period as a minimum. In case IBM or your reseller is unable to repair
an IBM Machine, you can alternatively ask for a partial refund as far as justified by
the reduced value of the unrepaired Machine or ask for a cancellation of the
respective agreement for such Machine and get your money refunded.
The second paragraph does not apply.
What IBM Will Do to Correct Problems: The following is added to this section:
During the warranty period, transportation for delivery of the failing Machine to
IBM will be at IBM’s expense.
Limitation of Liability: The following paragraph is added to this section:
The limitations and exclusions specified in the Statement of Limited Warranty will
not apply to damages caused by IBM with fraud or gross negligence and for
express warranty.
The following sentence is added to the end of item 2:
IBM’s liability under this item is limited to the violation of essential contractual
terms in cases of ordinary negligence.
EGYPT
Limitation of Liability: The following replaces item 2 in this section:
as to any other actual direct damages, IBM’s liability will be limited to the total
amount you paid for the Machine that is the subject of the claim. For purposes of
this item, the term “Machine” includes Machine Code and Licensed Internal Code
(LIC).
Applicability of suppliers and resellers (unchanged).
FRANCE
Limitation of Liability: The following replaces the second sentence of the first paragraph
of this section:
In such instances, regardless of the basis on which you are entitled to claim
damages from IBM, IBM is liable for no more than: (items 1 and 2 unchanged).
E-12
IBM M400 PROJECTOR: User’s Guide
GERMANY
What this Warranty Covers: The following replaces the first sentence of the first
paragraph of this section:
The warranty for an IBM Machine covers the functionality of the Machine for its
normal use and the Machine’s conformity to its Specifications.
The following paragraphs are added to this section:
The minimum warranty period for Machines is twelve months. In case IBM or
your reseller is unable to repair an IBM Machine, you can alternatively ask for a
partial refund as far as justified by the reduced value of the unrepaired Machine or
ask for a cancellation of the respective agreement for such Machine and get your
money refunded.
The second paragraph does not apply.
What IBM Will Do to Correct Problems: The following is added to this section:
During the warranty period, transportation for delivery of the failing Machine to
IBM will be at IBM’s expense.
Limitation of Liability: The following paragraph is added to this section:
The limitations and exclusions specified in the Statement of Limited Warranty will
not apply to damages caused by IBM with fraud or gross negligence and for
express warranty.
The following sentence is added to the end of item 2:
IBM’s liability under this item is limited to the violation of essential contractual
terms in cases of ordinary negligence.
HUNGARY
Limitation of Liability: The following is added at the end of this section:
The limitation and exclusion specified herein shall not apply to liability for a
breach of contract damaging life, physical well-being, or health that has been
caused intentionally, by gross negligence, or by a criminal act.
The parties accept the limitations of liability as valid provisions and state that the
Section 314.(2) of the Hungarian Civil Code applies as the acquisition price as well
as other advantages arising out of the present Statement of Limited Warranty
balance this limitation of liability.
IRELAND
What this Warranty Covers: The following is added to this section:
Except as expressly provided in these terms and conditions, all statutory
conditions, including all warranties implied, but without prejudice to the generality
of the foregoing all warranties implied by the Sale of Goods Act 1893 or the Sale of
Goods and Supply of Services Act 1980 are hereby excluded.
Limitation of Liability: The following replaces the terms of this section in its entirety:
Appendix E. IBM Statement of Limited Warranty - Z125-4753-07 - 11/2002
E-13
For the purposes of this section, a ″Default″ means any act, statement, omission, or
negligence on the part of IBM in connection with, or in relation to, the subject
matter of this Statement of Limited Warranty in respect of which IBM is legally
liable to you, whether in contract or tort. A number of Defaults which together
result in, or contribute to, substantially the same loss or damage will be treated as
one Default occurring on the date of occurrence of the last such Default.
Circumstances may arise where, because of a Default, you are entitled to recover
damages from IBM.
This section sets out the extent of IBM’s liability and your sole remedy.
1. IBM will accept unlimited liability for death or personal injury caused by the
negligence of IBM.
2. Subject always to the Items for Which IBM is Not Liable below, IBM will accept
unlimited liability for physical damage to your tangible property resulting from
the negligence of IBM.
3. Except as provided in items 1 and 2 above, IBM’s entire liability for actual
damages for any one Default will not in any event exceed the greater of 1) EUR
125,000, or 2) 125% of the amount you paid for the Machine directly relating to
the Default.
Items for Which IBM is Not Liable
Save with respect to any liability referred to in item 1 above, under no
circumstances is IBM, its suppliers or resellers liable for any of the following, even
if IBM or they were informed of the possibility of such losses:
1. loss of, or damage to, data;
2. special, indirect, or consequential loss; or
3. loss of profits, business, revenue, goodwill, or anticipated savings.
SLOVAKIA
Limitation of Liability: The following is added to the end of the last paragraph:
The limitations apply to the extent they are not prohibited under §§ 373-386 of the
Slovak Commercial Code.
SOUTH AFRICA, NAMIBIA, BOTSWANA, LESOTHO AND SWAZILAND
Limitation of Liability: The following is added to this section:
IBM’s entire liability to you for actual damages arising in all situations involving
nonperformance by IBM in respect of the subject matter of this Statement of
Warranty will be limited to the charge paid by you for the individual Machine that
is the subject of your claim from IBM.
UNITED KINGDOM
Limitation of Liability: The following replaces the terms of this section in its entirety:
For the purposes of this section, a ″Default″ means any act, statement, omission, or
negligence on the part of IBM in connection with, or in relation to, the subject
matter of this Statement of Limited Warranty in respect of which IBM is legally
E-14
IBM M400 PROJECTOR: User’s Guide
liable to you, whether in contract or tort. A number of Defaults which together
result in, or contribute to, substantially the same loss or damage will be treated as
one Default.
Circumstances may arise where, because of a Default, you are entitled to recover
damages from IBM.
This section sets out the extent of IBM’s liability and your sole remedy.
1. IBM will accept unlimited liability for:
a. death or personal injury caused by the negligence of IBM; and
b. any breach of its obligations implied by Section 12 of the Sale of Goods Act
1979 or Section 2 of the Supply of Goods and Services Act 1982, or any
statutory modification or re-enactment of either such Section.
2. IBM will accept unlimited liability, subject always to the Items for Which IBM
is Not Liable below, for physical damage to your tangible property resulting
from the negligence of IBM.
3. IBM’s entire liability for actual damages for any one Default will not in any
event, except as provided in items 1 and 2 above, exceed the greater of 1)
Pounds Sterling 75,000, or 2) 125% of the total purchase price payable or the
charges for the Machine directly relating to the Default.
These limits also apply to IBM’s suppliers and resellers. They state the maximum
for which IBM and such suppliers and resellers are collectively responsible.
Items for Which IBM is Not Liable
Save with respect to any liability referred to in item 1 above, under no
circumstances is IBM or any of its suppliers or resellers liable for any of the
following, even if IBM or they were informed of the possibility of such losses:
1. loss of, or damage to, data:
2. special, indirect, or consequential loss; or
3. loss of profits, business, revenue, goodwill, or anticipated savings.
Part 3 - Warranty Information
This Part 3 provides information regarding the warranty applicable to your
Machine, including the warranty period and type of warranty service IBM
provides.
Warranty Period
The warranty period may vary by country or region and is specified in the table
below. NOTE: ″Region″ means either Hong Kong or Macau Special Administrative
Region of China.
M400 PROJECTOR
Country or Region of
Purchase
Warranty Period
Type of Warranty Service
Worldwide
3 years
1, 4
Appendix E. IBM Statement of Limited Warranty - Z125-4753-07 - 11/2002
E-15
M400 PROJECTOR LAMP
Country or Region of
Purchase
Warranty Period
Type of Warranty Service
Worldwide
3 months
1, 4
A warranty period of 3 years on parts and 3 years on labor means that IBM
provides warranty service without charge for parts and labor during the 3 year
warranty period.
A warranty period of 3 months on parts and 3 months on labor means that IBM
provides warranty service without charge for parts and labor during the 3 month
warranty period.
Types of Warranty Service
If required, IBM provides repair or exchange service depending on the type of
warranty service specified for your Machine in the above table and as described
below. Warranty service may be provided by your reseller if approved by IBM to
perform warranty service. Scheduling of service will depend upon the time of your
call and is subject to parts availability. Service levels are response time objectives
and are not guaranteed. The specified level of warranty service may not be
available in all worldwide locations, additional charges may apply outside IBM’s
normal service area, contact your local IBM representative or your reseller for
country and location specific information.
1. Customer Replaceable Unit (″CRU″) Service
IBM will ship CRU parts to you for your replacement. If IBM instructs you to
return the replaced CRU, you are responsible for returning it to IBM in accordance
with IBM’s instructions. If you do not return the defective CRU, if IBM so
instructs, within 30 days of your receipt of the replacement CRU, IBM may charge
you for the replacement.
2. On-site Service
IBM or your reseller will either repair or exchange the failing Machine at your
location and verify its operation. You must provide suitable working area to allow
disassembly and reassembly of the IBM Machine. The area must be clean, well lit
and suitable for the purpose. For some Machines, certain repairs may require
sending the Machine to an IBM service center.
3. Courier or Depot Service1
You will disconnect the failing Machine for collection arranged by IBM. IBM will
provide you with a shipping container for you to return your Machine to a
designated service center. A courier will pick up your Machine and deliver it to the
designated service center. Following its repair or exchange, IBM will arrange the
return delivery of the Machine to your location. You are responsible for its
installation and verification.
4. Customer Carry-In or Mail-In Service
1. This type of service is called ThinkPad EasyServ or EasyServ in some countries.
E-16
IBM M400 PROJECTOR: User’s Guide
You will deliver or mail as IBM specifies (prepaid unless IBM specifies otherwise)
the failing Machine suitably packaged to a location IBM designates. After IBM has
repaired or exchanged the Machine, IBM will make it available for your collection
or, for Mail-in Service, IBM will return it to you at IBM’s expense, unless IBM
specifies otherwise. You are responsible for the subsequent installation and
verification of the Machine.
The IBM Machine Warranty worldwide web site at
http://www.ibm.com/servers/support/machine_warranties/ provides a
worldwide overview of IBM’s Limited Warranty for Machines, a Glossary of IBM
definitions, Frequently Asked Questions (FAQs) and Support by Product (Machine)
with links to Product Support pages. The IBM Statement of Limited Warranty is
also available on this site in 29 languages.
To obtain warranty service contact IBM or your IBM reseller. In Canada or the
United States, call 1-800-IBM-SERV (426-7378). For other countries, see the
telephone numbers below.
Phone numbers are subject to change without notice. For the latest phone number
list, go to www.ibm.com/pc/support and click Support Phone List.
Country or Region
Telephone Number
Country or Region
Telephone Number
Argentina
0800-666-0011
Malaysia
03-7727-7800
Australia
1300-130-426
Mexico
001-866-434-2080
Austria
01-24592-5901
Netherlands
020-514-5770
Belgium
Dutch 02-210-9820
New Zealand
0800-446-149
French 02-210-9800
Bolivia
0800-0189
Norway
66 81 11 00
Brazil
55-11-3889-8986
Peru
0-800-50-866
Canada
1-800-565-3344
Philippines
632-995-2225
Toronto 416-383-3344
Chile
800-224-488
Portugal
21-791 51 47
China (PRC)
800-810-1818
Russia
095-940-2000
China (Hong Kong
S.A.R.)
852-2825-7799
Singapore
1800-840-9911
Columbia
980-912-3021
Spain
91-662 49 16
Denmark
45 20 82 00
Sweden
08-477 4420
Ecuador
1-800-426911 (option
#4)
Switzerland
058-333-09-00
Finland
09-459 69 60
Taiwan
886-2-2725-9799
France
02 38 55 74 50
Thailand
66-2-273-4000
Germany
07032-1549 201
Turkey
00-800-446-32-041
Indonesia
021-523-8535
United Kingdom
0-1475-555 055
Ireland
01-815-9202
United States
1-800-426-7378
Italy
02-7031-6101
Uruguay
000-411-005-6649
Appendix E. IBM Statement of Limited Warranty - Z125-4753-07 - 11/2002
E-17
Country or Region
Telephone Number
Country or Region
Telephone Number
Japan
Consumer customers
0120-887-870
Venezuela
0-800-100-2011
Vietnam
848-8295-160
Business customers
0120-887-874
Luxembourg
E-18
IBM M400 PROJECTOR: User’s Guide
298-977 5063
Appendix F. Notices
IBM may not offer the products, services, or features discussed in this document in
all countries. Consult your local IBM representative for information on the
products and services currently available in your area. Any reference to an IBM
product, program, or service is not intended to state or imply that only that IBM
product, program, or service may be used. Any functionally equivalent product,
program, or service that does not infringe any IBM intellectual property right may
be used instead. However, it is the user’s responsibility to evaluate and verify the
operation of any non-IBM product, program, or service.
IBM may have patents or pending patent applications covering subject matter
described in this document. The furnishing of this document does not give you
any license to these patents. You can send license inquiries, in writing, to:
IBM Director of Licensing
IBM Corporation
North Castle Drive
Armonk, NY 10504-1785
U.S.A.
INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS
PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow disclaimer of
express or implied warranties in certain transactions, therefore, this statement may
not apply to you.
This information could include technical inaccuracies or typographical errors.
Changes are periodically made to the information herein; these changes will be
incorporated in new editions of the publication. IBM may make improvements
and/or changes in the product(s) and/or the program(s) described in this
publication at any time without notice.
The products described in this document are not intended for use in implantation
or other life support applications where malfunction may result in injury or death
to persons. The information contained in this document does not affect or change
IBM product specifications or warranties. Nothing in this document shall operate
as an express or implied license or indemnity under the intellectual property rights
of IBM or third parties. All information contained in this document was obtained
in specific environments and is presented as an illustration. The result obtained in
other operating environments may vary.
IBM may use or distribute any of the information you supply in any way it
believes appropriate without incurring any obligation to you.
Any references in this publication to non-IBM Web sites are provided for
convenience only and do not in any manner serve as an endorsement of those Web
sites. The materials at those Web sites are not part of the materials for this IBM
product, and use of those Web sites is at your own risk.
Any performance data contained herein was determined in a controlled
environment. Therefore, the result obtained in other operating environments may
© Copyright IBM Corp. 2004
F-1
vary significantly. Some measurements may have been made on development-level
systems and there is no guarantee that these measurements will be the same on
generally available systems. Furthermore, some measurements may have been
estimated through extrapolation. Actual results may vary. Users of this document
should verify the applicable data for their specific environment.
Trademarks
The following terms are trademarks of International Business Machines
Corporation in the United States, other countries, or both:
IBM
IBM logo
ThinkPad
Microsoft and Windows are trademarks of Microsoft Corporation in the United
States, other countries, or both.
Other company, product, or service names may be trademarks or service marks of
others.
Electronic emission notices
IBM M400 PROJECTOR
Federal Communications Commission (FCC) statement
Note: This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause
harmful interference, in which case the user will be required to correct the
interference at his own expense.
Properly shielded and grounded cables and connectors must be used in order to
meet FCC emission limits. IBM is not responsible for any radio or television
interference caused by using other than recommended cables and connectors or by
unauthorized changes or modifications to this equipment. Unauthorized changes
or modifications could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Industry Canada Class A emission compliance statement
This Class A digital apparatus complies with Canadian ICES-003.
Avis de conformite a la reglementation d’Industrie Canada
Cet appareil numérique de la classe A est conform à la norme NMB-003 du
Canada.
F-2
IBM M400 PROJECTOR: User’s Guide
Deutsche EMV-Direktive (electromagnetische Verträglichkeit)
Dieses Gerät ist berechtigt in Übereinstimmung mit dem deutschen EMVG vom
9.Nov.92 das EG-Konformitätszeichen zu führen.
Der Aussteller der Konformitätserklärung ist die IBM UK, Greenock.
Dieses Gerät erfüllt die Bedingungen der EN 55022 Klasse A. Für diese Klasse von
Geräten gilt folgende Bestimmung nach dem EMVG:
Geräte dürfen an Orten, für die sie nicht ausreichend entstört sind, nur mit
besonderer Genehmigung des Bundesminesters für Post und Telekommunikation
oder des Bundesamtes für Post und Telekommunikation betrieben werden. Die
Genehmigung wird erteilt, wenn keine elektromagnetischen Störungen zu erwarten
sind.
(Auszug aus dem EMVG vom 9.Nov.92, Para.3. Abs.4)
Hinweis: Dieses Genehmigungsverfahren ist von der Deutschen Bundespost noch nicht
veröffentlicht worden.
Europen Union - EMC directive
This product is in conformity with the protection requirements of EU Council
Directive 89/336/ECC on the approximation of the laws of the Member States
relating to electromagnetic compatibility.
IBM cannot accept responsibility for any failure to satisfy the protection
requirements resulting from a non-recommended modification of the product,
including the fitting of non-IBM option cards.
This product has been tested and found to comply with the limits for Class A
Information Technology Equipment according to CISPR 22/European Standard EN
55022. The limits for Class A equipment were derived for commercial and
industrial environments to provide reasonable protection against interference with
licensed communication equipment.
Warning: This is a Class A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate measures.
Union Européenne - Directive Conformité électromagnétique
Ce produit est conforme aux exigences de protection de la Directive 89/336/EEC
du Conseil de l’UE sur le rapprochement des lois des États membres en matière de
compatibilité électromagnétique.
IBM ne peut accepter aucune responsabilité pour le manquement aux exigences de
protection résultant d’une modification non recommandée du produit, y compris
l’installation de cartes autres que les cartes IBM.
Ce produit a été testé et il satisfait les conditions de l’équipement informatique de
Classe A en vertu de CISPR22/Standard européen EN 55022. Les conditions pour
l’équipement de Classe A ont été définies en fonction d’un contexte d’utilisation
commercial et industriel afin de fournir une protection raisonnable contre
l’interférence d’appareils de communication autorisés.
Appendix F. Notices
F-3
Avertissement : Ceci est un produit de Classe A. Dans un contexte résidentiel, ce produit
peut causer une interférence radio exigeant que l’utilisateur prenne des mesures adéquates.
Union Europea - Normativa EMC
Questo prodotto è conforme alle normative di protezione ai sensi della Direttiva
del Consiglio dell’Unione Europea 89/336/CEE sull’armonizzazione legislativa
degli stati membri in materia di compatibilità elettromagnetica.
IBM non accetta responsabilità alcuna per la mancata conformità alle normative di
protezione dovuta a modifiche non consigliate al prodotto, compresa l’installazione
di schede e componenti di marca diversa da IBM.
Le prove effettuate sul presente prodotto hanno accertato che esso rientra nei limiti
stabiliti per le le apparecchiature di informatica Classe A ai sensi del CISPR
22/Norma Europea EN 55022. I limiti delle apparecchiature della Classe A sono
stati stabiliti al fine di fornire ragionevole protezione da interferenze mediante
dispositivi di comunicazione in concessione in ambienti commerciali ed industriali.
Avvertimento: Questso è un prodotto appartenente alla Classe A. In ambiente domestico,
tale prodotto può essere causa di interferenze radio, nel qual caso l’utente deve prendere
misure adeguate.
Unione Europea - Directiva EMC (Conformidad électromagnética)
Este producto satisface los requisitos de protección del Consejo de la UE, Directiva
89/336/CEE en lo que a la legislatura de los Estados Miembros sobre
compatibilidad electromagnética se refiere.
IBM no puede aceptar responsabilidad alguna si este producto deja de satisfacer
dichos requisitos de protección como resultado de una modificación no
recomendada del producto, incluyendo el ajuste de tarjetas de opción que no sean
IBM.
Este producto ha sido probado y satisface los límites para Equipos Informáticos
Clase A de conformidad con el Estándar CISPR22 y el Estándar Europeo EN 55022.
Los límites para los equipos de Clase A se han establecido para entornos
comerciales e industriales a fin de proporcionar una protección razonable contra las
interferencias con dispositivos de comunicación licenciados.
Advertencia: Este es un producto de Clase A. En un entorno doméstico este producto
podría causar radiointerferencias en cuyo caso el usuario deberá tomar las medidas
adecuadas.
F-6
IBM M400 PROJECTOR: User’s Guide
Part Number: 22P9382
Printed in USA
(1P) P/N: 22P9382
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement