IBM Partner Pavilion Projector iLC300 User manual

IBM Partner Pavilion Projector iLC300 User manual
IBM iLC300 Conference Projector
IBM iLC300 Conference Projector User’s
Guide
IBM iLC300 Conference Projector
IBM iLC300 Conference Projector User’s
Guide
First Edition (April 2003)
© Copyright International Business Machines Corporation 2003. All rights reserved.
US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract
with IBM Corp.
Contents
Safety
. . . . . . . . . . . . . . . v
Preface . . . . . . . . . . . . . . vii
Registering your option .
.
.
.
.
.
.
.
.
. viii
Chapter 1. Introduction . . . . . . . . 1
Chapter 2. Setting up the projector . . . 3
Displaying a computer image. .
Using the projector with Windows
time . . . . . . . . . .
Adjusting the image . . . . .
.
98
.
.
. . . . .
for the first
. . . . .
. . . . .
. 5
. 6
. 6
Chapter 3. Using the projector with a
video device . . . . . . . . . . . . . 9
Displaying a video image.
.
.
.
.
.
.
.
.
. 10
Chapter 4. Using the projector features 13
Using the keypad buttons . .
Using the remote control . . .
Troubleshooting the remote .
Using the audio . . . . . .
Connecting external speakers
Troubleshooting audio . . .
Optimizing computer images .
Presentation features . . . .
Presentation Director . . . .
Optimizing video images . . .
Customizing the projector . .
Shutting down the projector . .
Screen save . . . . . .
Power save . . . . . .
Turning off the projector . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Chapter 5. Using the menus
© Copyright IBM Corp. 2003
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
13
14
15
15
16
16
16
16
17
17
17
18
18
18
18
. . . . . 19
Picture menu . . .
Advanced settings .
Settings menu . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. 19
. 20
. 22
Appendix A. Maintenance. . . . . . . 25
Cleaning the lens . . . .
Replacing the projection lamp
Resetting the lamp timer .
Using the security lock . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
25
25
26
26
Appendix B. Troubleshooting your
setup . . . . . . . . . . . . . . . 27
Appendix C. Specifications . . . . . . 29
Appendix D. Warranty information . . . 31
Warranty period . . . . . . . . . . . .
Service and support . . . . . . . . . .
Warranty information on the World Wide Web
Online technical support . . . . . . . .
Telephone technical support . . . . . . .
IBM Statement of Limited Warranty Z125-4753-06
8/2000 . . . . . . . . . . . . . . .
Part 1 - General Terms. . . . . . . . .
Part 2 - Country-unique Terms . . . . . .
.
.
.
.
.
31
31
31
31
31
. 33
. 33
. 35
Appendix E. European Union warranty
information . . . . . . . . . . . . . 43
Appendix F. Notices . . . . . . . . . 45
Trademarks . . . . .
Electronic emission notices
Federal Communications
statement . . . . .
. . . . . . . .
. . . . . . . .
Commission (FCC)
. . . . . . . .
. 46
. 46
. 46
iii
iv
IBM iLC300 Conference Projector: IBM iLC300 Conference Projector User’s Guide
Safety
Before installing this product, read the Safety Information.
Antes de instalar este produto, leia as Informações de Segurança.
Pred instalací tohoto produktu si prectete prírucku bezpecnostních instrukcí.
Læs sikkerhedsforskrifterne, før du installerer dette produkt.
Ennen kuin asennat tämän tuotteen, lue turvaohjeet kohdasta Safety Information.
Avant d’installer ce produit, lisez les consignes de sécurité.
Vor der Installation dieses Produkts die Sicherheitshinweise lesen.
Prima di installare questo prodotto, leggere le Informazioni sulla Sicurezza.
Lees voordat u dit product installeert eerst de veiligheidsvoorschriften.
Les sikkerhetsinformasjonen (Safety Information) før du installerer dette produktet.
Antes de instalar este produto, leia as Informações sobre Segurança.
Pred inštaláciou tohto zariadenia si pečítaje Bezpečnostné predpisy.
Antes de instalar este producto lea la información de seguridad.
Läs säkerhetsinformationen innan du installerar den här produkten.
© Copyright IBM Corp. 2003
v
vi
IBM iLC300 Conference Projector: IBM iLC300 Conference Projector User’s Guide
Preface
The IBM iLC300 Conference Video Projector can be used for both business
presentations and home entertainment and is easy to connect, use, and maintain.
In addition to this user’s guide, your option package contains the following:
Figure 1. Standard Accessories
1
2
3
4
5
6
7
8
9
Computer cable
Power cable
Composite video cable
Remote
Audio cable
Projector
Quick setup card and support card
User’s Guide with CD and safety card
Color-coded cable straps
If any of the items listed above are missing or damaged, contact your place of
purchase. Be sure to retain your proof of purchase; it might be required to receive
warranty service.
For information on optional accessories for your projector, go to the
www.ibm.com/pc/support/ IBM Web site.
© Copyright IBM Corp. 2003
vii
Registering your option
Thank you for purchasing this IBM product. Take a few moments to register your
product and provide us with information that will help IBM to better serve you in
the future. Your feedback is valuable to us in developing products and services
that are important to you, as well as in developing better ways to communicate
with you. Register your option on the www.ibm.com/pc/register/ IBM Web site.
IBM will send you information and updates on your registered product unless you
indicate on the Web site questionnaire that you do not want to receive further
information.
viii
IBM iLC300 Conference Projector: IBM iLC300 Conference Projector User’s Guide
Chapter 1. Introduction
The projector comes in a carry case that also stores accessory items, such as the
projector remote, color-coded cables, documentation, and CD. The color-coded
cables and straps make setup easy and the case is designed to help you keep
accessories organized and protected.
v 1 Computer cable
v 2 Power cable
v
v
v
v
v
v
3
4
5
6
7
8
Composite video cable
Remote
Audio cable
Projector
Quick setup card and support card
User’s Guide with CD and safety card
v 9 Color-coded cable straps
video
computer 1
audio in
R
Y
computer 2
monitor out
s-video
network
R
audio in
Pb
audio in
L
computer in
audio out
serial control
L
Pr
v 1Computer 1 & 2
v 2S-video
© Copyright IBM Corp. 2003
1
2
v
v
v
v
v
3Audio
4Composite video
5Computer monitor
6Remote control receiver
7Lock
v
v
v
v
v
v
8Network connector
9Serial connector
10External speakers (audio out)
11Component video
12Computer 1 & 2 audio
13Power connector
IBM iLC300 Conference Projector: IBM iLC300 Conference Projector User’s Guide
Chapter 2. Setting up the projector
This chapter provides information on positioning the projector, connecting a
computer source, using the projector with Windows® 98, and displaying and
adjusting a computer source image.
Note: You can use your projector with Presentation Director to plan and give
presentations with confidence. You can ensure that your computer and
display will not turn off or go blank during a presentation, be sure your
graphics and text will be crisp and clear, and save important display settings
for future presentations with the same equipment. For additional
information on Presentation Director, visit the www.ibm.com/pc/support
Web site and search for ″Presentation Director.″
Required computer connections
1. Connect the black end of the computer cable to the Computer 1 connector on
the projector.
2. Connect the blue end to the video port on your computer. If you are using a
desktop computer, you first need to disconnect the monitor cable from the
computer’s video port.
video
computer 1
audio in
R
Y
computer 2
monitor
s-video
network
R
audio in
Pr
audio in
L
computer in
audio out
serial control
L
Pb
3. Connect the black power cable to the connector on the back of the projector
and to your electrical outlet.
The Power LED on the projector’s keypad turns solid green.
Note: Always use the power cable that shipped with the projector.
video
computer 1
audio in
R
Y
computer 2
monitor
s-video
network
R
audio in
Pr
audio in
L
computer in
audio out
ial control
serial
L
Pb
Optional computer connections
© Copyright IBM Corp. 2003
3
To control your computer’s mouse using the projector’s remote control, connect the
USB connector on the computer cable to the computer. USB drivers must be
installed to use the USB feature.
video
audio in
computer 1
R
Y
computer 2
monitor
s-video
network
R
Pr
audio in
audio in
L
computer in
audio out
serial control
L
Pb
To have sound with your presentation, connect the audio cable to your computer
and to the computer Audio In connector on the projector.
video
computer 1
audio in
R
Y
computer 2
monitor
s-video
network
R
Pr
audio in
audio in
L
computer in
audio out
L
serial control
Pb
If you are using a desktop computer and want to see the image on your computer
screen as well as on the projection screen, plug the monitor cable to the Monitor
out connector on the projector.
video
R
Y
audio in
computer 1
computer 2
monitor
video
s-video
network
R
Pr
audio in
audio in
L
computer in
L
audio out
serial control
Pb
If you prefer connecting your computer to the projector with an optional VESA
cable, connect one end of the cable to the VESA port on your computer, and
connect the other end of the cable to the blue Computer 2 connector on the
projector.
video
computer 1
audio in
R
Y
computer 2
monitor
s-video
network
R
audio in
Pr
audio in
L
computer in
L
audio out
serial control
Pb
You can control the projector from a computer by connecting an RS-232 cable to
the projector’s Serial connector. Specific RS-232 commands can be found in the
4
IBM iLC300 Conference Projector: IBM iLC300 Conference Projector User’s Guide
Service and Support section of our website at www.ibm.com/pc/support.
video
R
Y
audio in
computer 1
computer 2
monitor
s-video
network
R
Pr
audio in
audio in
L
computer in
audio out
serial control
L
Pb
The projector can be managed by ProjectorNet networking software through its
Network connector.
video
computer 1
audio in
R
Y
computer 2
monitor
s-video
network
R
audio in
Pr
audio in
L
computer in
audio out
serial control
L
Network
Pb
Displaying a computer image
Use the following steps to display a computer image.
1. Remove the lens cap.
2. Press the Power button on the top of the projector or the remote. The LED
flashes green and the fans start to run. When the lamp comes on, the startup
screen is displayed and the LED is steady green. It can take a minute for the
image to achieve full brightness. If you do not see a startup screen, see
Appendix B, “Troubleshooting your setup”, on page 27.
3. Turn on your computer. The computer’s image should appear on the projection
screen. If it doesn’t, press the Computer button on the projector’s keypad.
4. Make sure your laptop’s external video port is active. Many laptops do not
automatically turn on their external video port when a projector is connected.
For IBM machines, press FN+F7 to turn the external display on and off. For
other manufacturers, consult the documentation that came with your computer.
If you do not see a computer image, try pressing the Auto Image button on the
keypad.
Chapter 2. Setting up the projector
5
Using the projector with Windows 98 for the first time
The first time you connect a computer running Windows 98 to the projector, the
computer recognizes the projector as “new hardware” and the Add New Hardware
Wizard appears. Follow these instructions to use the Wizard to load the correct
driver (which was installed with your Windows operating system).
If you are running Windows 2000, Windows Me, or Window XP, skip these steps
and go to “Adjusting the image”.
1. Click Next to begin searching for the driver.
2. Make sure Search for the best driver is selected, then click Next again.
3. Uncheck any checked boxes, then click Next. Windows automatically locates
the driver. If this driver has been removed, reload the driver using your
Windows operating system CD.
4. When Windows finds the driver, you are ready to install it. Click Next.
If you connected a USB mouse cable, the Add New Hardware Wizard appears.
Drivers must be installed to use the USB functionality.
The Wizard launches three times. The first time, it detects a USB Composite
Device. The second time, it detects a USB Human Interface Device for the
keyboard. The third time, it detects a USB Human Interface Device for the mouse.
Adjusting the image
Follow these steps to adjust the image.
1. Adjust the height of the projector, if necessary, by pressing the release button to
extend the elevator foot. Rotate the leveling foot, if necessary.
2. Position the projector the desired distance from the screen at a 90 degree angle
to the screen.
3. Adjust the zoom or focus rings by rotating them until the desired image size
and sharpness are produced.
6
IBM iLC300 Conference Projector: IBM iLC300 Conference Projector User’s Guide
4. If the image is not square, adjust the keystone by using the buttons on the
keypad.
Press the upper Keystone button to reduce the upper part of the image, and
press the lower Keystone button to reduce the lower part.
5. Adjust the Contrast or Brightness in the Picture menu.
Chapter 2. Setting up the projector
7
8
IBM iLC300 Conference Projector: IBM iLC300 Conference Projector User’s Guide
Chapter 3. Using the projector with a video device
This chapter explains how to connect a video device to the projector and display
video images.
Standard video connections
1. Plug the video cable’s yellow connector into the video-out connector on the
video device.
2. Plug the other yellow connector into the yellow Video connector on the
projector.
3. Plug a white connector into the left audio out connector on the video device.
4. Plug a red connector into the right audio out connector on the video device.
5. Plug the remaining white connector into the left audio in connector on the
projector.
6. Plug the red connector into the right audio in connector on the projector.
video
computer 1
audio in
R
Y
computer 2
monitor
s-video
network
R
audio in
Pr
audio in
L
computer in
audio out
serial control
L
Pb
7. Connect the black power cable to the connector on the back of the projector
and to your electrical outlet. The Power LED on the keypad turns solid.
video
computer 1
audio in
R
Y
computer 2
monitor
s-video
network
R
audio in
Pr
audio in
L
computer in
audio out
serial control
L
Pb
Note: Always use the power cable that shipped with the projector.
Optional video connections
If the video device uses a round, four-prong S-video connector, plug an S-video
cable (sold separately) into the S-video connector on the video device and into the
S-video connector on the projector. Use the video cable’s audio connectors as
© Copyright IBM Corp. 2003
9
described directly above (the yellow connectors on the video cable are not used).
video
R
Y
audio in
computer 1
computer 2
monitor
s-video
network
R
Pr
audio in
audio in
L
computer in
audio out
serial control
L
Pb
If the video device uses component cable connectors (sold separately), plug the
cable’s green connectors into the green component-out connector on the video
device and into the green component connector (labeled Y) on the projector. Plug
the component cable’s blue connectors into the blue component- out connector on
the video device and into the blue component connector (labeled Pb) on the
projector. Plug the component cable’s red connectors into the red component-out
connector on the video device and into the red component connector (labeled Pr)
on the projector. Use the video cable’s audio connectors as described directly above
(the yellow connectors on the video cable are not used).
video
computer 1
audio in
R
Y
computer 2
monitor
s-video
network
R
audio in
Pr
audio in
L
computer in
audio out
serial control
L
Pb
Displaying a video image
To display a video image:
1. Remove the lens cap.
2. Press the Power button on the top of the projector.
The LED flashes green and the fans start to run. When the lamp comes on, the
startup screen is displayed and the LED is steady green. It can take a minute
for the image to achieve full brightness. If you do not see a startup screen see
Appendix B, “Troubleshooting your setup”, on page 27.
3. Plug in and turn on the video device.
The video device’s image should appear on the projection screen. If it does not,
press the Video button.
4. Position the projector the desired distance from the screen at a 90 degree angle
to the screen.
5. Adjust the zoom or focus rings by rotating them until the desired image size
and sharpness are produced.
6. If the image is not square, adjust the keystone using the buttons on the keypad.
Press the upper Keystone button to reduce the upper part of the image, and
press the lower Keystone button to reduce the lower part.
7. Adjust the volume on the keypad or the remote.
10
IBM iLC300 Conference Projector: IBM iLC300 Conference Projector User’s Guide
8. Adjust the Contrast, Brightness, Color, or Tint in the Picture menu. See
Chapter 5, “Using the menus”, on page 19 for help with menus.
Chapter 3. Using the projector with a video device
11
12
IBM iLC300 Conference Projector: IBM iLC300 Conference Projector User’s Guide
Chapter 4. Using the projector features
This chapter explains how to use projector features such as the remote, audio,
menus, and Presentation Director.
Using the keypad buttons
Most buttons are described in detail in other sections. Below is an overview of
their functions:
power–turns the projector on and off.
menu–opens the on-screen menus.
select–confirms choices made in the menus.
up/down arrows–navigates to and adjusts settings in the menus.
auto image–resets the projector to the source.
presets–cycles through the available preset settings.
keystone–adjusts squareness of the image.
volume–adjusts sound.
video and computer–changes the active source.
© Copyright IBM Corp. 2003
13
Using the remote control
The remote uses two (2) provided AAA batteries. They are easily installed by
sliding the cover off the remote’s back, aligning the + and - ends of the batteries,
sliding them into place, and then replacing the cover.
laser
v 1 Cursor control
v 2 Backlight button
v 3 Mouse buttons
v 4 Navigation buttons
Attention: When replacing the batteries, be aware that using batteries other than
the type provided with the projector may risk severe damage to the remote. When
disposing of the batteries, be sure to do so in an environmentally proper manner.
To operate the remote control, point the remote at the projection screen or at the
projector (not at the computer). The range of optimum operation is about 15 feet
(4.5m).
CAUTION:
To reduce the risk of injury to the eyes, do not look directly into the remote
control laser light and do not point the laser light into anyones eyes. The remote
control is equipped with a Class II laser that emits radiation.
To use the laser pointer, press and hold the Laser button. The laser turns off when
the button is released, or times out after two (2) minutes of continuous operation.
14
IBM iLC300 Conference Projector: IBM iLC300 Conference Projector User’s Guide
Left and right remote mouse buttons are used to mimic the actions of the left/right
mouse buttons on your computer. Mouse cursor movement is managed via the
remote’s Cursor control. Connect the USB connector on the computer cable to your
computer to use these buttons and control your computer’s mouse. When you do
this for the first time, the Add New Hardware wizard may appear.
Press the remote’s Menu button to open the projector’s menu system. Use the
arrow buttons to navigate, and the Select button to select features and adjust
values in the menus. See Chapter 5, “Using the menus”, on page 19.
The remote also has a power button to turn the projector on and off (see “Shutting
down the projector” on page 18 for shutdown info), volume and mute buttons to
control the sound, a backlight button to light the remote’s buttons in the dark, and
video and computer buttons to switch between sources.
Two presentation-specific features are also provided. Use the blank button to
display a blank screen instead of the current slide; use the effect button to invoke a
user-definable action, such as freeze or zoom.
If you are displaying presentations in Microsoft® PowerPoint®, you can use the
remote’s mouse buttons to navigate through your presentation while in Slide Show
mode. To configure PowerPoint for this, choose Options from the PowerPoint
Tools menu, click the View tab, de-select the “Popup Menu on Right Mouse Click”
option in the Slide Show section, then click OK. Then, when you’re in
PowerPoint’s Slide Show mode, a left click advances to the next slide and a right
click returns to the previous slide (other PowerPoint modes are not affected).
Troubleshooting the remote
v Make sure the batteries are installed in the proper orientation and are not dead.
v Make sure you’re pointing the remote at the projector, not the computer, and are
within the remote range of 30 feet (9.14m).
v If you are trying to control your computer’s mouse, make sure the USB cable is
connected. If using a USB cable, make sure the correct drivers are installed.
Using the audio
To play sound from the projector, connect your source to the Audio In connector
on the projector.
video
computer 1
audio in
R
Y
computer 2
monitor
s-video
network
R
audio in
Pr
audio in
L
computer in
L
audio out
serial control
Pb
To adjust the volume, use the buttons on the keypad or remote.
To mute the sound, press the Mute button.
Chapter 4. Using the projector features
15
Connecting external speakers
The projector can be attached to external speakers that have their own power
source by plugging speaker cables into the projector’s left and right Audio Out
connectors.
video
computer 1
audio in
R
Y
computer 2
monitor
s-video
network
R
audio in
Pr
audio in
L
computer in
audio out
serial control
L
Pb
Troubleshooting audio
If there is no sound, check the following:
v Make sure the audio cable is connected.
v Make sure mute isn’t active.
v Make sure the volume is turned up enough. Press the volume button on the
keypad or remote.
v Make sure that if you are connected to Computer 1 on the back of the projector,
that you are also connected to the corresponding audio in. If you are connected
to Computer 2, be sure you are connected to its corresponding audio in.
v Adjust the audio source.
v If playing a video, make sure the playback has not been paused.
Optimizing computer images
After your computer is connected properly and the computer’s image is on the
screen, you can optimize the image using the onscreen menus. For general
information on using the menus, see Chapter 5, “Using the menus”, on page 19.
v Adjust the Keystone, Contrast, or Brightness in the Picture menu.
v Change the Aspect Ratio. Aspect Ratio is the ratio of the image width to image
height. TV screens are usually 1.33:1, also known as 4:3. HDTV and most DVDs
are 1.78:1, or 16:9. Choose the option that best fits your input source.
v Adjust the Color Space or Color Temperature in the Advanced menu.
v Adjust the Phase, Tracking, Horizontal, or Vertical position in the Advanced
menu.
Once you have optimized the image for a particular source, you can save the
settings using Presets. This allows you to quickly recall these settings later.
Presentation features
Several features are provided to make giving presentation easier. The following is
an overview, details are found in Chapter 5, “Using the menus”, on page 19.
v The remote’s Effect button allows you to assign various features to the key. The
default effect is About, which displays information about the projector and
16
IBM iLC300 Conference Projector: IBM iLC300 Conference Projector User’s Guide
current source. You can select from Blank, Mute, Aspect Ratio, Source, Auto
Image, Freeze, Zoom, and About. See Chapter 5, “Using the menus”, on page 19
for details.
v The Freeze effect allows you to freeze the displayed image. This is useful if you
want to make changes on your computer without your audience seeing them.
v The Blank button on the remote allows you to display a blank screen instead of
the active source.
v The Startup Logo menu option lets you change the default startup screen to a
black, white, or blue screen.
v Two menu options, Power Save and Screen Save, are provided to automatically
shut down the projector after several minutes of inactivity or display a black
screen. This helps preserve lamp life.
v A Low Power menu option is also available to help lower the projector’s fan
sound volume.
Presentation Director
Presentation Director helps you create and save presentation schemes that setup
your ThinkPad computer to use an external monitor, projector, or television. It also
allows you to expand the size of your desktop display by extending the contents of
the display across two monitors. For more information on Presentation Director,
visit the www.ibm.com/pc/support Web site and search for ″Presentation
Director.″
Optimizing video images
After the video device is connected properly and the image is on the screen, you
can optimize the image using the onscreen menus. For general information on
using the menus, see Chapter 5, “Using the menus”, on page 19.
v Adjust the Keystone, Contrast, Brightness, Color, or Tint in the Picture menu.
v Change the Aspect ratio. Aspect ratio is the ratio of the image width to image
height. TV screens are usually 1.33:1, also known as 4:3. HDTV and most DVDs
are 1.78:1, or 16:9. Choose the option that best fits your input source.
Select a Sharpness setting.
Adjust the Color Temperature. Select a listed value, or select User and
individually adjust the intensity of the red, green, and blue color.
v Select a different Video Standard. Auto tries to determine the standard of the
incoming video. Select a different standard if necessary.
v
v
v
Turn overscan on to remove noise around the video image.
Customizing the projector
You can customize the projector for your specific setup and needs.
v For rear projection, turn Rear mode on in the Settings -> System menu.
v For ceiling mounted projection, turn Ceiling mode on in the Settings -> System
menu.
v Specify which source the projector checks first for active video during
power-up.
v Specify the function of the Effect Key on the remote.
v Turn the projector’s display messages on and off.
v Turn on power saving features.
Chapter 4. Using the projector features
17
v
v
Specify blank screen colors and startup logos.
Specify the menu language.
Shutting down the projector
The projector automatically displays a black screen after no active source is
detected for 30 minutes. This black screen helps preserve the life of the projector.
The image returns when an active source is detected or a remote or keypad button
is pressed.
Screen save
You can make the black screen appear after five minutes by turning onScreen Save
in the Settings -> System menu. There are six time options for the Screen Save
feature. They range from five minutes to 30 minutes with five minute intervals.
Power save
The projector also has a Power Save feature that automatically turns the lamp off
after no signals are detected for 20 minutes. After 10 additional minutes with no
signal, the projector powers down. If an active signal is received before the
projector powers down, the image is displayed. You must press the Power button
to display an image after 30 minutes have passed. When Power Save is enabled,
Screen Save is disabled.
Turning off the projector
To turn off the projector, press the power button and verify that you want to turn
the projector off by pressing the power button again within 3 seconds. You can
cancel the shutdown by not pressing the power button a second time. The lamp
turns off and the LED blinks green for 1 minute while the fans continue to run to
cool the lamp. When the lamp has cooled, the LED lights green and the fans stop.
Unplug the power cable to completely power off the projector.
18
IBM iLC300 Conference Projector: IBM iLC300 Conference Projector User’s Guide
Chapter 5. Using the menus
To open the menus, press the menu button on the keypad or remote. (The menus
automatically close after 60 seconds if no buttons are pressed.) The Main menu
appears. Use the arrow buttons to move up and down to highlight the desired
submenu, then press the Select button.
To change a menu setting, highlight it, press Select, then use the up and down
arrow buttons to adjust the value, select an option using radio buttons, or turn the
feature on or off using check boxes. Press Select to confirm your changes. Use the
arrows to navigate to another setting. When your adjustments are complete,
navigate to Exit, then press Select to go to the previous menu; press the Menu
button at any time to close the menus.
Dots appear before the menu name. The number of dots indicate the menu’s level,
ranging from one (the Main menu) to four (the most nested menus).
The menus are grouped by usage:
v The Picture menu provides image adjustments.
v The Settings menu provides set-up type adjustments that are not changed often.
v The About menu provides a read-only display of information about the
projector and source.
Certain menu items may be hidden until a particular source is connected. For
example, Sharpness is only available for video sources and will be hidden when a
computer source is active. Other menu items may be grayed out when they are not
available. For example, Brightness is grayed out until an image is active.
Picture menu
To adjust the following five settings, highlight the setting, press Select, use the up
and down arrows to adjust the values, then press select to confirm the changes.
Keystone: adjusts the image vertically and makes a squarer image. You can also
adjust keystone from the keypad.
Contrast: controls the degree of difference between the lightest and darkest parts
of the picture and changes the amount of black and white in the image.
© Copyright IBM Corp. 2003
19
Brightness: changes the intensity of the image.
Color: (video sources only) adjusts a video image from black and white to fully
saturated color.
Tint: (NTSC video sources only) adjusts the red-green color balance in the image.
Aspect Ratio: Aspect ratio is the ratio of the image width to image height. TV
screens are usually 1.33:1, also known as 4:3. HDTV and most DVDs are 1.78:1, or
16:9. The default is 4:3, which displays the input resized up or down to fill the
display area.
Presets: The provided Presets optimize the projector for displaying computer
presentations, photographs, film images, and video images. (Film input is material
originally captured on a film camera, like a movie; video input is material
originally captured on a video camera, like a TV show or sporting event.) You can
use the preset as a starting point, then further customize the settings for each
source. The settings you customize are saved in the preset for each source. To
restore the factory default settings, choose Factory Reset in the Settings -> Service
menu.
There are also three user-definable presets. To set a preset for the current source,
adjust the image, select Save Settings in the Presets menu, then choose Save User
1, 2, or 3. You can recall these settings in the future by selecting the appropriate
user presets.
Advanced settings
To adjust the following advanced settings, go to Main Menu -> Picture ->
Advanced.
Sharpness: (video sources only) Changes the clarity of the edges of a video image.
Select a sharpness setting.
Color Space: This option applies to computer and component video sources (it
won’t appear in the menu for S-video or composite video sources). It allows you to
select a color space that has been specifically tuned for the video input. When
Auto is selected, the projector automatically determines the standard. To choose a
different setting, turn off Auto, then choose RGB for computer sources, choose
20
IBM iLC300 Conference Projector: IBM iLC300 Conference Projector User’s Guide
either REC709 or REC601 for component video sources.
Color Temperature: Changes the intensity of the colors. Select a listed value, or
select User and individually adjust the intensity of the red, green, and blue colors.
Video Standard: When it is set to Auto, the projector attempts to pick the video
standard automatically based on the input signal it receives. (The video standard
options may vary depending on your region of the world.) If the projector is
unable to detect the correct standard, the colors may not look right or the image
may appear “torn.” If this happens, manually select a video standard by selecting
NTSC, PAL, or SECAM from the Video Standard menu.
Overscan: (video sources only) Removes noise around the video image.
The following four options are for computer sources only:
Phase: Adjusts the horizontal phase of a computer source.
Tracking: Adjusts the horizontal phase of a computer source.
Horizontal/Vertical Position: Adjusts the position of a computer source.
Chapter 5. Using the menus
21
Settings menu
To adjust the following Settings options, go to Main Menu -> Settings.
Audio: Allows adjustments to the sound balance between speakers and speaker
volume. The Internal speakers and projector startup Chime can be turned on or off
by placing or removing a check in the respective checkboxes.
Sources -> Power-up Source: This determines which source the projector checks
first for active video during power-up.
Sources: Allows you to assign a particular input to a specific source key as an
optional full-featured remote. Also allows selection of a default Power-up Source
and enables or disables Autosource. When Autosource is not checked, the projector
defaults to the source selected in Power-up Source. If no source is found, a blank
screen displays. When Autosource is checked, Power-up Source determines which
source the projector defaults to at power-up. If no signal is present, the projector
checks the sources in order until a source is found or until power down.
System -> Rear: Reverses the image so you can project from behind a translucent
screen.
Ceiling: Turns the image upside down for ceiling-mounted projection.
Note: It is recommended that all final image adjustments in Ceiling mode are
made once the unit has fully warmed up.
Auto Power: When Auto Power is checked, the projector automatically goes into
the startup state after the projector is powered on. This allows control of ceiling
mounted projectors with a wall power switch.
Display Messages: displays status messages (such as “Searching” or “Mute”) in
the lower-left corner of the screen.
Low Power: Toggles between on and off. Turn it on to lower the light output of the
lamp. This also lowers the fan speed, making the projector quieter.
22
IBM iLC300 Conference Projector: IBM iLC300 Conference Projector User’s Guide
NND: Prevents your notebook computer from going into Screen Save mode.
Power Save: Automatically turns the lamp off after no signals are detected for 20
minutes. After 10 additional minutes with no signal, the projector powers down. If
an active signal is received before the projector powers down, the image will be
displayed.
Screen Save: Automatically blanks the screen with a black color after no signals
are detected for a preset number of minutes. The image returns when an active
source is detected or a remote or keypad button is pressed. Screen Save is disabled
when Power Save is enabled.
Startup Logo: Allows you to display a blank Black, White, or Blue screen instead
of the default screen at startup and when no source is detected.
Blank Screen: Determines what color displays when you press the Blank button on
the remote or there is a blank screen when no source is active.
Effect Key:Allows you to assign a different function to the Effect button on the
remote to quickly and easily use the effect. Only one effect can be enabled at a
time. Highlight an effect and press Select to choose a different one.
v Blank: Shows an empty screen.
v Mute: Turns off all sound.
v Aspect Ratio: Sets the ratio of the image width to image height.
v
v
v
v
Source: Cycles through the available sources.
Auto Image: Causes computer sources to be re-acquired.
Freeze: Pauses the projected image.
Zoom: Lets you magnify a part of the screen. To use the Zoom effect, press
Effect, then press the remote’s mouse left-click to zoom the image, press the
mouse right-click to decrease the magnification. You can use the cursor control
Chapter 5. Using the menus
23
to pan the image, displaying different parts of it (only if the image is magnified).
To return to the original size and cancel Zoom, press the Effect button a second
time.
v About: The default effect. It displays the About menu.
Network: The projector has an RJ45 Ethernet connector that supports network
connections and TCP/IP protocols. This will allow for the control and management
of the projector over a corporate network. The following fields are accessible when
DHCP is not checked and available for manual entry of data.
v IP Address: Identifies the projector on the network.
v Subnet mask: Separates the network address part of the IP address.
v Default gateway: The IP address of the local router.
v DHCP: Select this to automatically obtain an IP address, subnet mask, and
default gateway.
v Network Info: Provides information on the network configuration.
The Network Info menu is informational and cannot be edited. It displays the
current IP address, subnet mask, default gateway, and the projector’s MAC
address.
Language: Allows you to select a language for the onscreen display of menus and
messages.
Service: To use these features, highlight them and press Select.
v Factory Reset: Restores all settings (except Lamp Hours and Network settings)
to their default after displaying a confirmation dialog box.
v Lamp Reset: Resets the lamp hours counter in the About menu to zero. Do this
only after changing the lamp. It displays a confirmation dialog box.
v Service Code: Only used by authorized service personnel.
24
IBM iLC300 Conference Projector: IBM iLC300 Conference Projector User’s Guide
Appendix A. Maintenance
This chapter describes how to clean the lens, replace the projection lamp, and use
the security lock.
Cleaning the lens
To clean the lens:
1. Apply a non-abrasive camera lens cleaner to a soft, dry cloth.
Avoid using an excessive amount of cleaner. Do not apply the cleaner directly
to the lens. Abrasive cleaners, solvents, or other harsh chemicals might scratch
the lens.
2. Lightly wipe the cleaning cloth over the lens in a circular motion. If you do not
intend to use the projector immediately, replace the lens cap.
Replacing the projection lamp
The lamp hour timer in the About menu counts the number of hours the lamp has
been in use. After 1,980 hours, the message “Change lamp” briefly appears on the
screen at each startup. When the timer reaches 2,000 hours, the lamp will no longer
light. You can order new lamp modules from your dealer.
To change the projection lamp:
1. Turn off the projector and unplug the power cable.
2. Wait 60 minutes to allow the projector to cool thoroughly.
3. Turn the projector upside down and remove the lamp door by removing the
two screws and sliding the lamp door tabs out of the three tab bays.
CAUTION:
Never operate the projector with the lamp door removed. This disrupts the
air flow and causes the projector to overheat.
4. Loosen the captive screw on the lamp module.
CAUTION:
v This product contains a Metal Arc lamp which contains Mercury. Dispose
of as required by local ordinances and regulations.
v To avoid burns, allow the projector to cool for at least 60 minutes before
you replace the lamp.
v Do not drop the lamp module. The glass may shatter and cause injury.
v Do not touch the glass lamp screen. Fingerprints can obscure projection
sharpness.
v Be extremely careful when removing the lamp housing. In the unlikely
event that the lamp ruptures, small glass fragments may be generated.
The lamp module is designed to contain most of these fragments, but use
caution when removing it.
5. Carefully remove the lamp module by grasping and lifting the metal bail wire.
Dispose of the lamp in an environmentally proper manner.
6. Install the new lamp module, making sure that it is properly seated.
7. Tighten the single screw.
© Copyright IBM Corp. 2003
25
8. Replace the lamp door by sliding the tabs into the tab bays and tightening the
two screws.
9. Plug in the power cable, then press the Power button to turn the projector
back on.
10. Reset the lamp hour timer.
Resetting the lamp timer
If the lamp timer has reached the maximum number of hours for the projector
lamp (2,000 hours), the LED on the projector ’s keypad will show a lamp error (see
Appendix B, “Troubleshooting your setup”, on page 27). To reset the lamp age,
simultaneously hold down the two Volume keys on the projector’s keypad for 10
seconds. At that point the LED will turn green and you can power on the projector.
You can also navigate to the Settings -> Service menu and select Lamp Reset to
reset the lamp timer.
Using the security lock
The projector has a security lock for use with a PC Guardian Cable Lock Refer to
the information that came with the lock for instructions on how to use it.
video
computer 1
audio in
R
Y
computer 2
monitor out
s-video
network
R
audio in
Pb
audio in
L
computer in
audio out
serial control
L
Pr
1 Security lock
26
IBM iLC300 Conference Projector: IBM iLC300 Conference Projector User’s Guide
Appendix B. Troubleshooting your setup
This section provides information on setup troubleshooting.
The LED on top of the projector’s keypad indicates the state of the projector and
can help you troubleshoot. The following table describes LED behavior and
meaning.
LED color/behavior
Meaning
solid green
The projector is plugged in, or the projector
has been turned on and the software has
initialized. The projector has been turned off
and the fans have stopped.
blinking green
The power button has been pressed and the
software is initializing, or the projector is
powering down and the fans are running to
cool the lamp.
blinking red
A fan or lamp failure has occurred. Make
sure the vents aren’t blocked.Turn off the
projector and wait one minute, then turn the
projector on again. If the projector has been
working for 2000 hours or more, replace the
lamp and reset the lamp timer. Contact
Technical Support if the problem persists.
solid red
An unidentifiable error: please contact
Technical Support.
The following table shows common problems. In some cases, more than one
solution is possible. Try the solutions in the order they are presented.
Problem
Solution
No startup screen
v Plug in power cable and remove lens cap.
v Press Power button
Only startup screen appears
v Press the Computer button.
v Activate laptop’s external port.
v Restart laptop.
No computer image
Set your computer’s display resolution to
the native resolution of the projector (Start
-> Settings -> Control Panel -> Display ->
Settings tab, select 1024x768). For a laptop,
turn on dual-display mode.
Image fuzzy or cropped
Set your computer’s display resolution to
the native resolution of the projector (Start
-> Settings -> Control Panel -> Display ->
Settings tab, select 1024x768). For a laptop,
turn on dual-display mode.
Remote control not controlling my
computer’s mouse
Connect computer cable, then load USB
drivers, if needed.
Image not square
Adjust keystone on keypad.
© Copyright IBM Corp. 2003
27
Problem
Solution
Edges of image distorted
Turn overscan on in the Picture ->
Advanced menu.
Image not sharp
Adjust sharpness in the Picture ->
Advanced menu.
Image does not fit 16:9 screen
Change aspect ratio to 16:9 in the Picture ->
Aspect Ratio menu.
Image upside down
Turn off Ceiling in Settings -> System
menu.
Image reversed
Turn off Rear in Settings -> System menu.
Video image ″torn″ or fragmented
Change Video Standard in Picture ->
Advance menu.
Projected colors do not match source
Adjust color, tint, color temperature,
brightness, and/or contrast in the menus.
Lamp won’t turn on; LED blinking red
v Make sure vents are not blocked; allow
projector to cool for one minute, or
v Replace lamp (see “Replacing the
projection lamp” on page 25).
Image not centered on screen
v Move projector; adjust zoom and/or
height, or
v Adjust horizontal or vertical position in
the Picture -> Advanced menu.
28
IBM iLC300 Conference Projector: IBM iLC300 Conference Projector User’s Guide
Appendix C. Specifications
Temperature
v Operating: 10-35° C (50-95° F) at 0-10,000
feet
v Non-operating: -20-+70° C -4-+150° F) at
0-20,000 feet
Altitude
v Operating:3.048 meters (0-10,000 feet)
v Non-operating: 6,096 meters (0-20,000 feet)
Humidity
v Operating: 10% -95% relative humidity,
non-condensing
v Non-operating: 10% - 90% relative
humidity, non-condensing
Dimensions
351W x 325L x 110H mm (13.8 x 12.8 x 4.3
in.)
Weight
4.24 kg (9.3 lbs.) unpacked
Optics
Focus Range: 5-32.8 feet (1.5-10 meters)
Lamp Type
250-watt UHP lamp
Input Power Requirements
v 100V-120V 4A, 50/60 Hz
v 200V-240V 2A 50 Hz
Ceiling Mount
© Copyright IBM Corp. 2003
UL tested/listed ceiling mount with
minimum capacity of 20.87 kg (46 lbs.)
29
30
IBM iLC300 Conference Projector: IBM iLC300 Conference Projector User’s Guide
Appendix D. Warranty information
This section contains the warranty period for your product, information about
obtaining warranty service and support, and the IBM Statement of Limited
Warranty.
Warranty period
Contact your place of purchase for warranty service information.
Machine - IBM iLC300 Conference Video Projector
Warranty period
Service delivery method
Projector - parts: 3 years, labor: 3 years
CCE (customer carry in or mail in)
Projector lamp - parts: 3 months
CCE (customer carry in or mail in)
Service and support
The following information describes the technical support that is available for your
product, during the warranty period or throughout the life of the product. Refer to
your IBM Statement of Limited Warranty for a full explanation of IBM warranty
terms.
For information on European Union legal rights under applicable national
legislation governing the sale of consumer goods, see Appendix E, “European
Union warranty information”, on page 43.
Warranty information on the World Wide Web
The IBM Machine Warranties Web site at
www.ibm.com/servers/support/machine_warranties/ contains a worldwide
overview of the IBM Limited Warranty for IBM Machines, a glossary of terms used
in the Statement of Limited Warranty, Frequently Asked Questions (FAQ), and
links to Product Support Web pages. The IBM Statement of Limited Warranty is
available from this Web site in 29 languages in Portable Document Format (PDF).
Online technical support
Online technical support is available during the life of your product through the
Personal Computing Support Web site at http://www.ibm.com/pc/support/.
During the warranty period, assistance for replacement or exchange of defective
components is available. In addition, if your IBM option is installed in an IBM
computer, you might be entitled to service at your location. Your technical support
representative can help you determine the best alternative.
Telephone technical support
Installation and configuration support through the IBM HelpCenter® will be
withdrawn or made available for a fee, at IBM’s discretion, 90 days after the option
has been withdrawn from marketing. Additional support offerings, including
step-by-step installation assistance, are available for a nominal fee.
© Copyright IBM Corp. 2003
31
To assist the technical support representative, have available as much of the
following information as possible:
v Option name
v Option number
v Proof of purchase
v Computer manufacturer, model, serial number (if IBM), and manual
v Exact wording of the error message (if any)
v Description of the problem
v Hardware and software configuration information for your system
If possible, be at your computer. Your technical support representative might want
to walk you through the problem during the call.
For the support telephone number and support hours by country, refer to the
following table. If the number for your country or region is not listed, contact your
IBM reseller or IBM marketing representative. Response time may vary depending
on the number and nature of the calls received.
Support 24 hours a day, 7 days a week
32
Canada (Toronto only)
416-383-3344
Canada (all other)
1-800-565-3344
U.S.A. and Puerto Rico
1-800-772-2227
All other countries and regions
Go to http://www.ibm.com/pc/support/,
and click Support Phone List.
IBM iLC300 Conference Projector: IBM iLC300 Conference Projector User’s Guide
IBM Statement of Limited Warranty Z125-4753-06 8/2000
Part 1 - General Terms
This Statement of Limited Warranty includes Part 1 - General Terms and Part 2 Country-unique Terms. The terms of Part 2 replace or modify those of Part 1. The
warranties provided by IBM in this Statement of Limited Warranty apply only to
Machines you purchase for your use, and not for resale, from IBM or your reseller.
The term “Machine” means an IBM machine, its features, conversions, upgrades,
elements, or accessories, or any combination of them. The term “Machine” does
not include any software programs, whether pre-loaded with the Machine,
installed subsequently or otherwise. Unless IBM specifies otherwise, the following
warranties apply only in the country where you acquire the Machine. Nothing in
this Statement of Limited Warranty affects any statutory rights of consumers that
cannot be waived or limited by contract. If you have any questions, contact IBM or
your reseller.
The IBM Warranty for Machines: IBM warrants that each Machine 1) is free from
defects in materials and workmanship and 2) conforms to IBM’s Official Published
Specifications (“Specifications”). The warranty period for a Machine is a specified,
fixed period commencing on its Date of Installation. The date on your sales receipt
is the Date of Installation unless IBM or your reseller informs you otherwise.
If a Machine does not function as warranted during the warranty period, and IBM
or your reseller are unable to either 1) make it do so or 2) replace it with one that
is at least functionally equivalent, you may return it to your place of purchase and
your money will be refunded.
Extent of Warranty: The warranty does not cover the repair or exchange of a
Machine resulting from misuse, accident, modification, unsuitable physical or
operating environment, improper maintenance by you, or failure caused by a
product for which IBM is not responsible. The warranty is voided by removal or
alteration of Machine or parts identification labels.
THESE WARRANTIES ARE YOUR EXCLUSIVE WARRANTIES AND REPLACE
ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR
CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. THESE WARRANTIES GIVE YOU SPECIFIC LEGAL RIGHTS AND
YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM
JURISDICTION TO JURISDICTION. SOME JURISDICTIONS DO NOT
ALLOW THE EXCLUSION OR LIMITATION OF EXPRESS OR IMPLIED
WARRANTIES, SO THE ABOVE EXCLUSION OR LIMITATION MAY NOT
APPLY TO YOU. IN THAT EVENT, SUCH WARRANTIES ARE LIMITED IN
DURATION TO THE WARRANTY PERIOD. NO WARRANTIES APPLY AFTER
THAT PERIOD.
Items Not Covered by Warranty: IBM does not warrant uninterrupted or error-free
operation of a Machine. Any technical or other support provided for a Machine
under warranty, such as assistance via telephone with “how-to” questions and
those regarding Machine set-up and installation, will be provided WITHOUT
WARRANTIES OF ANY KIND.
Warranty Service: To obtain warranty service for a Machine, contact IBM or your
reseller. If you do not register your Machine with IBM, you may be required to
present proof of purchase.
Appendix D. Warranty information
33
During the warranty period, IBM or your reseller, if approved by IBM to provide
warranty service, provides without charge certain types of repair and exchange
service to keep Machines in, or restore them to, conformance with their
Specifications. IBM or your reseller will inform you of the available types of
service for a Machine based on its country of installation. At its discretion, IBM or
your reseller will 1) either repair or exchange the failing Machine and 2) provide
the service either at your location or a service center. IBM or your reseller will also
manage and install selected engineering changes that apply to the Machine.
Some parts of IBM Machines are designated as Customer Replaceable Units (called
“CRUs”), e.g., keyboards, memory, or hard disk drives. IBM ships CRUs to you for
replacement by you. You must return all defective CRUs to IBM within 30 days of
your receipt of the replacement CRU. You are responsible for downloading
designated Machine Code and Licensed Internal Code updates from an IBM
Internet Web site or from other electronic media, and following the instructions
that IBM provides.
When warranty service involves the exchange of a Machine or part, the item IBM
or your reseller replaces becomes its property and the replacement becomes yours.
You represent that all removed items are genuine and unaltered. The replacement
may not be new, but will be in good working order and at least functionally
equivalent to the item replaced. The replacement assumes the warranty service
status of the replaced item. Many features, conversions, or upgrades involve the
removal of parts and their return to IBM. A part that replaces a removed part will
assume the warranty service status of the removed part.
Before IBM or your reseller exchanges a Machine or part, you agree to remove all
features, parts, options, alterations, and attachments not under warranty service.
You also agree to
1. ensure that the Machine is free of any legal obligations or restrictions that
prevent its exchange;
2. obtain authorization from the owner to have IBM or your reseller service a
Machine that you do not own; and
3. where applicable, before service is provided:
a. follow the problem determination, problem analysis, and service request
procedures that IBM or your reseller provides;
b. secure all programs, data, and funds contained in a Machine;
c. provide IBM or your reseller with sufficient, free, and safe access to your
facilities to permit them to fulfill their obligations; and
d. inform IBM or your reseller of changes in a Machine’s location.
IBM is responsible for loss of, or damage to, your Machine while it is 1) in IBM’s
possession or 2) in transit in those cases where IBM is responsible for the
transportation charges.
Neither IBM nor your reseller is responsible for any of your confidential,
proprietary or personal information contained in a Machine which you return to
IBM or your reseller for any reason. You should remove all such information from
the Machine prior to its return.
Limitation of Liability: Circumstances may arise where, because of a default on
IBM’s part or other liability, you are entitled to recover damages from IBM. In each
such instance, regardless of the basis on which you are entitled to claim damages
from IBM (including fundamental breach, negligence, misrepresentation, or other
34
IBM iLC300 Conference Projector: IBM iLC300 Conference Projector User’s Guide
contract or tort claim), except for any liability that cannot be waived or limited by
applicable laws, IBM is liable for no more than
1. damages for bodily injury (including death) and damage to real property and
tangible personal property; and
2. the amount of any other actual direct damages, up to the charges (if recurring,
12 months’ charges apply) for the Machine that is subject of the claim. For
purposes of this item, the term “Machine” includes Machine Code and
Licensed Internal Code.
This limit also applies to IBM’s suppliers and your reseller. It is the maximum
for which IBM, its suppliers, and your reseller are collectively responsible.
UNDER NO CIRCUMSTANCES IS IBM LIABLE FOR ANY OF THE
FOLLOWING: 1) THIRD-PARTY CLAIMS AGAINST YOU FOR DAMAGES
(OTHER THAN THOSE UNDER THE FIRST ITEM LISTED ABOVE); 2) LOSS
OF, OR DAMAGE TO, YOUR RECORDS OR DATA; OR 3) SPECIAL,
INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC
CONSEQUENTIAL DAMAGES, LOST PROFITS OR LOST SAVINGS, EVEN IF
IBM, ITS SUPPLIERS OR YOUR RESELLER IS INFORMED OF THEIR
POSSIBILITY. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO
THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
Governing Law
Governing Law: Both you and IBM consent to the application of the laws of the
country in which you acquired the Machine to govern, interpret, and enforce all of
your and IBM’s rights, duties, and obligations arising from, or relating in any
manner to, the subject matter of this Agreement, without regard to conflict of law
principles.
Part 2 - Country-unique Terms
AMERICAS
BRAZIL
Governing Law: The following is added after the first sentence:
Any litigation arising from this Agreement will be settled exclusively by the court
of Rio de Janeiro.
NORTH AMERICA
Warranty Service: The following is added to this Section:
To obtain warranty service from IBM in Canada or the United States, call
1-800-IBM-SERV (426-7378).
CANADA
Governing Law: The following replaces “laws of the country in which you acquired the
Machine” in the first sentence:
laws in the Province of Ontario.
UNITED STATES
Appendix D. Warranty information
35
Governing Law: The following replaces “laws of the country in which you acquired the
Machine” in the first sentence:
laws of the State of New York.
ASIA PACIFIC
AUSTRALIA
The IBM Warranty for Machines: The following paragraph is added to this Section:
The warranties specified in this Section are in addition to any rights you may have
under the Trade Practices Act 1974 or other similar legislation and are only limited
to the extent permitted by the applicable legislation.
Limitation of Liability: The following is added to this Section:
Where IBM is in breach of a condition or warranty implied by the Trade Practices
Act 1974 or other similar legislation, IBM’s liability is limited to the repair or
replacement of the goods or the supply of equivalent goods. Where that condition
or warranty relates to right to sell, quiet possession or clear title, or the goods are
of a kind ordinarily acquired for personal, domestic or household use or
consumption, then none of the limitations in this paragraph apply.
Governing Law: The following replaces “laws of the country in which you acquired the
Machine” in the first sentence:
laws of the State or Territory.
CAMBODIA, LAOS, AND VIETNAM
Governing Law: The following replaces “laws of the country in which you acquired the
Machine” in the first sentence:
laws of the State of New York.
The following is added to this Section:
Disputes and differences arising out of or in connection with this Agreement shall
be finally settled by arbitration which shall be held in Singapore in accordance
with the rules of the International Chamber of Commerce (ICC). The arbitrator or
arbitrators designated in conformity with those rules shall have the power to rule
on their own competence and on the validity of the Agreement to submit to
arbitration. The arbitration award shall be final and binding for the parties without
appeal and the arbitral award shall be in writing and set forth the findings of fact
and the conclusions of law.
All proceedings shall be conducted, including all documents presented in such
proceedings, in the English language. The number of arbitrators shall be three,
with each side to the dispute being entitled to appoint one arbitrator.
The two arbitrators appointed by the parties shall appoint a third arbitrator before
proceeding upon the reference. The third arbitrator shall act as chairman of the
proceedings. Vacancies in the post of chairman shall be filled by the president of
the ICC. Other vacancies shall be filled by the respective nominating party.
Proceedings shall continue from the stage they were at when the vacancy occurred.
If one of the parties refuses or otherwise fails to appoint an arbitrator within 30
days of the date the other party appoints its, the first appointed arbitrator shall be
the sole arbitrator, provided that the arbitrator was validly and properly
appointed.
36
IBM iLC300 Conference Projector: IBM iLC300 Conference Projector User’s Guide
The English language version of this Agreement prevails over any other language
version.
HONG KONG AND MACAU
Governing Law: The following replaces “laws of the country in which you acquired the
Machine” in the first sentence:
laws of Hong Kong Special Administrative Region.
INDIA
Limitation of Liability: The following replaces items 1 and 2 of this Section:
1. liability for bodily injury (including death) or damage to real property and
tangible personal property will be limited to that caused by IBM’s negligence;
2. as to any other actual damage arising in any situation involving
nonperformance by IBM pursuant to, or in any way related to the subject of
this Statement of Limited Warranty, IBM’s liability will be limited to the charge
paid by you for the individual Machine that is the subject of the claim.
JAPAN
Governing Law: The following sentence is added to this Section:
Any doubts concerning this Agreement will be initially resolved between us in
good faith and in accordance with the principle of mutual trust.
NEW ZEALAND
The IBM Warranty for Machines: The following paragraph is added to this Section:
The warranties specified in this Section are in addition to any rights you may have
under the Consumer Guarantees Act 1993 or other legislation which cannot be
excluded or limited. The Consumer Guarantees Act 1993 will not apply in respect
of any goods which IBM provides, if you require the goods for the purposes of a
business as defined in that Act.
Limitation of Liability: The following is added to this Section:
Where Machines are not acquired for the purposes of a business as defined in the
Consumer Guarantees Act 1993, the limitations in this Section are subject to the
limitations in that Act.
PEOPLE’S REPUBLIC OF CHINA (PRC)
Governing Law: The following replaces this Section:
Both you and IBM consent to the application of the laws of the State of New York
(except when local law requires otherwise) to govern, interpret, and enforce all
your and IBM’s rights, duties, and obligations arising from, or relating in any
manner to, the subject matter of this Agreement, without regard to conflict of law
principles.
Any disputes arising from or in connection with this Agreement will first be
resolved by friendly negotiations, failing which either of us has the right to submit
the dispute to the China International Economic and Trade Arbitration Commission
in Beijing, the PRC, for arbitration in accordance with its arbitration rules in force
at the time. The arbitration tribunal will consist of three arbitrators. The language
to be used therein will be English and Chinese. An arbitral award will be final and
binding on all the parties, and will be enforceable under the Convention on the
Recognition and Enforcement of Foreign Arbitral Awards (1958).
Appendix D. Warranty information
37
The arbitration fee will be borne by the losing party unless otherwise determined
by the arbitral award.
During the course of arbitration, this Agreement will continue to be performed
except for the part which the parties are disputing and which is undergoing
arbitration.
EUROPE, MIDDLE EAST, AFRICA (EMEA)
THE FOLLOWING TERMS APPLY TO ALL EMEA COUNTRIES:
The terms of this Statement of Limited Warranty apply to Machines purchased
from IBM or an IBM reseller.
Warranty Service: If you purchase an IBM Machine in Austria, Belgium, Denmark,
Estonia, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland or
United Kingdom, you may obtain warranty service for that Machine in any of
those countries from either (1) an IBM reseller approved to perform warranty
service or (2) from IBM. If you purchase an IBM Personal Computer Machine in
Albania, Armenia, Belarus, Bosnia and Herzegovina, Bulgaria, Croatia, Czech
Republic, Georgia, Hungary, Kazakhstan, Kirghizia, Federal Republic of Yugoslavia,
Former Yugoslav Republic of Macedonia (FYROM), Moldova, Poland, Romania,
Russia, Slovak Republic, Slovenia, or Ukraine, you may obtain warranty service for
that Machine in any of those countries from either (1) an IBM reseller approved to
perform warranty service or (2) from IBM.
If you purchase an IBM Machine in a Middle Eastern or African country, you may
obtain warranty service for that Machine from the IBM entity within the country of
purchase, if that IBM entity provides warranty service in that country, or from an
IBM reseller, approved by IBM to perform warranty service on that Machine in
that country. Warranty service in Africa is available within 50 kilometers of an IBM
authorized service provider. You are responsible for transportation costs for
Machines located outside 50 kilometers of an IBM authorized service provider.
Governing Law: The applicable laws that govern, interpret and enforce rights,
duties, and obligations of each of us arising from, or relating in any manner to, the
subject matter of this Statement, without regard to conflict of laws principles, as
well as Country-unique terms and competent court for this Statement are those of
the country in which the warranty service is being provided, except that in 1)
Albania, Bosnia-Herzegovina, Bulgaria, Croatia, Hungary, Former Yugoslav
Republic of Macedonia, Romania, Slovakia, Slovenia, Armenia, Azerbaijan, Belarus,
Georgia, Kazakhstan, Kyrgyzstan, Moldova, Russia, Tajikistan, Turkmenistan,
Ukraine, and Uzbekistan, the laws of Austria apply; 2) Estonia, Latvia, and
Lithuania, the laws of Finland apply; 3) Algeria, Benin, Burkina Faso, Cameroon,
Cape Verde, Central African Republic, Chad, Congo, Djibouti, Democratic Republic
of Congo, Equatorial Guinea, France, Gabon, Gambia, Guinea, Guinea-Bissau,
Ivory Coast, Lebanon, Mali, Mauritania, Morocco, Niger, Senegal, Togo, and
Tunisia, this Agreement will be construed and the legal relations between the
parties will be determined in accordance with the French laws and all disputes
arising out of this Agreement or related to its violation or execution, including
summary proceedings, will be settled exclusively by the Commercial Court of
Paris; 4) Angola, Bahrain, Botswana, Burundi, Egypt, Eritrea, Ethiopia, Ghana,
Jordan, Kenya, Kuwait, Liberia, Malawi, Malta, Mozambique, Nigeria, Oman,
Pakistan, Qatar, Rwanda, Sao Tome, Saudi Arabia, Sierra Leone, Somalia, Tanzania,
Uganda, United Arab Emirates, United Kingdom, West Bank/Gaza, Yemen,
Zambia, and Zimbabwe, this Agreement will be governed by English Law and
38
IBM iLC300 Conference Projector: IBM iLC300 Conference Projector User’s Guide
disputes relating to it will be submitted to the exclusive jurisdiction of the English
courts; and 5) in Greece, Israel, Italy, Portugal, and Spain any legal claim arising
out of this Statement will be brought before, and finally settled by, the competent
court of Athens, Tel Aviv, Milan, Lisbon, and Madrid, respectively.
THE FOLLOWING TERMS APPLY TO THE COUNTRY SPECIFIED:
AUSTRIA AND GERMANY
The IBM Warranty for Machines: The following replaces the first sentence of the first
paragraph of this Section:
The warranty for an IBM Machine covers the functionality of the Machine for its
normal use and the Machine’s conformity to its Specifications.
The following paragraphs are added to this Section:
The minimum warranty period for Machines is six months. In case IBM or your
reseller is unable to repair an IBM Machine, you can alternatively ask for a partial
refund as far as justified by the reduced value of the unrepaired Machine or ask
for a cancellation of the respective agreement for such Machine and get your
money refunded.
Extent of Warranty: The second paragraph does not apply.
Warranty Service: The following is added to this Section:
During the warranty period, transportation for delivery of the failing Machine to
IBM will be at IBM’s expense.
Limitation of Liability: The following paragraph is added to this Section:
The limitations and exclusions specified in the Statement of Limited Warranty will
not apply to damages caused by IBM with fraud or gross negligence and for
express warranty.
The following sentence is added to the end of item 2:
IBM’s liability under this item is limited to the violation of essential contractual
terms in cases of ordinary negligence.
EGYPT
Limitation of Liability: The following replaces item 2 in this Section:
as to any other actual direct damages, IBM’s liability will be limited to the total
amount you paid for the Machine that is the subject of the claim. For purposes of
this item, the term “Machine” includes Machine Code and Licensed Internal Code.
Applicability of suppliers and resellers (unchanged).
FRANCE
Limitation of Liability: The following replaces the second sentence of the first paragraph
of this Section:
In such instances, regardless of the basis on which you are entitled to claim
damages from IBM, IBM is liable for no more than: (items 1 and 2 unchanged).
IRELAND
Appendix D. Warranty information
39
Extent of Warranty: The following is added to this Section:
Except as expressly provided in these terms and conditions, all statutory
conditions, including all warranties implied, but without prejudice to the generality
of the foregoing all warranties implied by the Sale of Goods Act 1893 or the Sale of
Goods and Supply of Services Act 1980 are hereby excluded.
Limitation of Liability: The following replaces items one and two of the first paragraph
of this Section:
1. death or personal injury or physical damage to your real property solely caused
by IBM’s negligence; and
2. the amount of any other actual direct damages, up to 125 percent of the charges
(if recurring, the 12 months’ charges apply) for the Machine that is the subject of
the claim or which otherwise gives rise to the claim.
Applicability of suppliers and resellers (unchanged).
The following paragraph is added at the end of this Section:
IBM’s entire liability and your sole remedy, whether in contract or in tort, in
respect of any default shall be limited to damages.
ITALY
Limitation of Liability: The following replaces the second sentence in the first paragraph:
In each such instance unless otherwise provided by mandatory law, IBM is liable
for no more than:
1. (unchanged)
2. as to any other actual damage arising in all situations involving nonperformance
by IBM pursuant to, or in any way related to the subject matter of this Statement
of Warranty, IBM’s liability, will be limited to the total amount you paid for the
Machine that is the subject of the claim.
Applicability of suppliers and resellers (unchanged).
The following replaces the third paragraph of this Section:
Unless otherwise provided by mandatory law, IBM and your reseller are not liable
for any of the following: (items 1 and 2 unchanged) 3) indirect damages, even if IBM
or your reseller is informed of their possibility.
SOUTH AFRICA, NAMIBIA, BOTSWANA, LESOTHO AND SWAZILAND
Limitation of Liability: The following is added to this Section:
IBM’s entire liability to you for actual damages arising in all situations involving
nonperformance by IBM in respect of the subject matter of this Statement of
Warranty will be limited to the charge paid by you for the individual Machine that
is the subject of your claim from IBM.
UNITED KINGDOM
Limitation of Liability: The following replaces items 1 and 2 of the first paragraph of
this Section:
1. death or personal injury or physical damage to your real property solely caused
by IBM’s negligence;
2. the amount of any other actual direct damages or loss, up to 125 percent of the
charges (if recurring, the 12 months’ charges apply) for the Machine that is the
subject of the claim or which otherwise gives rise to the claim;
40
IBM iLC300 Conference Projector: IBM iLC300 Conference Projector User’s Guide
The following item is added to this paragraph:
3. breach of IBM’s obligations implied by Section 12 of the Sale of Goods Act 1979
or Section 2 of the Supply of Goods and Services Act 1982.
Applicability of suppliers and resellers (unchanged).
The following is added to the end of this Section:
IBM’s entire liability and your sole remedy, whether in contract or in tort, in
respect of any default shall be limited to damages.
Appendix D. Warranty information
41
42
IBM iLC300 Conference Projector: IBM iLC300 Conference Projector User’s Guide
Appendix E. European Union warranty information
Consumers in the European Union have legal rights under applicable national
legislation governing the sale of consumer goods. This legislation may apply to
you if you purchased this product as a consumer (that is, as a natural person, and
for personal use which is not related to your trade, business or profession). To
obtain warranty service under this legislation, you will need to present the proof of
purchase to IBM, together with an indication that you are a consumer.
Dans l’Union européenne, les consommateurs disposent de droits selon la loi en
vigueur nationale régissant la vente de biens de consommation. Cette loi peut vous
être applicable si vous avez acheté ce produit en tant que consommateur
(c’est-à-dire, en tant que personne physique, et pour un usage privé qui n’a aucun
rapport avec votre commerce, votre métier ou profession). Pour bénéficier du
service prévu par la Garantie dans le cadre de cette loi, vous devez présenter la
preuve d’achat correspondante à IBM, en lui indiquant que vous êtes un
consommateur.
I consumatori dell’Unione Europea sono tutelati dalla legislazione nazionale che
regola la vendita dei beni al consumatore. Tale legislazione può essere applicata se
il prodotto è stato acquistato da un consumatore (vale a dire, una persona fisica e
per uso personale non legato al commercio, all’azienda o alla professione svolta).
Per ottenere il servizio di garanzia con questa legislazione, occorre presentare una
prova di acquisto alla IBM, insieme con l’indicazione che il richiedente è un
consumatore.
In der Europäischen Union haben die Verbraucher nach der geltenden nationalen
Gesetzgebung Rechte hinsichtlich des Verbrauchsgüterkaufs. Diese Gesetzgebung
kann für Sie gelten, wenn Sie dieses Produkt als Privatkunde erworben haben (d.
h. als natürliche Person und für den persönlichen Gebrauch, der nicht mit Ihrem
Gewerbe, Ihrem Unternehmen oder Ihrer beruflichen Tätigkeit zusammenhängt).
Um unter dieser Gesetzgebung Garantieservice zu erhalten, müssen Sie IBM den
Kaufnachweis zusammen mit einem Nachweis dafür, dass Sie Privatkunde sind,
vorlegen.
Los consumidores de la Unión europea tienen derechos legales de acuerdo con la
legislación nacional aplicable que regula la venta de bienes de consumo. Esta
legislación puede aplicarse en su caso si ha adquirido este producto como un
consumidor (es decir, como una persona natural y para uso personal que no esté
relacionado con su comercio, negocio o profesión). Para obtener servicio de
garantía de acuerdo con esta legislación, tendrá que presentar el justificante de
compra a IBM, junto con información indicando que es un consumidor.
Na União Europeia, os consumidores gozam de direitos legais nos termos da
legislação nacional aplicável que rege a venda de bens de consumo. Esta legislação
poderá ser-lhe aplicável caso tenha adquirido este produto na qualidade de
consumidor (ou seja, um indivíduo, para utilização pessoal, não relacionada com a
sua actividade profissional, comercial ou negócio). Para obter serviço de garantia
nos termos desta legislação, terá que apresentar a prova de compra à IBM, em
conjunto com a indicação de que adquiriu o produto na qualidade de consumidor.
Forbrugere i EU har via gældende national lovgivning visse rettigheder i
forbindelse med salg af forbrugsvarer. Denne lovgivning gælder muligvis for dig,
© Copyright IBM Corp. 2003
43
hvis du har anskaffet dette produkt som forbruger, dvs. som fysisk person og til
personlig brug og ikke i forbindelse med dit fag, din forretning eller din
profession. For at opnå garantiservice i henhold til denne lovgivning skal du vise
kvitteringen for købet af produktet til IBM og angive, at du er forbruger.
Klanten in de Europese Unie hebben wettelijke rechten onder toepasselijke
landelijke wetgeving die van toepassing is op de verkoop van
consumptiegoederen. Deze wetgeving is mogelijk op u van toepassing als u dit
product als consument hebt aangeschaft (dat is als natuurlijk persoon en voor
persoonlijk gebruik dat niet in verband staat tot uw handel, zaken of beroep). Voor
het verkrijgen van garantieservice onder deze wetgeving moet u het bewijs van
aankoop kunnen tonen aan IBM, samen met een indicatie dat u een consument
bent.
EU-maissa kuluttajilla on kulutustavaroiden myyntiä koskevan paikallisen
lainsäädännön mukaiset oikeudet. Tämä lainsäädäntö saattaa koskea teitä, jos olette
hankkinut tämän tuotteen kuluttajana (luonnollisena henkilönä kaupankäyntiin,
liiketoimintaan tai ammatinharjoittamiseen liittymättömä henkilökohtaiseen
käyttöön). Täyttäkää tässä tapauksessa alla olevat tie ja toimittakaa kortti IBM:lle
rekisteröintiä varten. IBM käyttää tietoja varmistaakseen, että teille kuuluvat
kuluttajan oikeudet toteutuvat.
Konsumenter inom EU har lagliga rättigheter i enlighet med tillämplig lagstiftning
i varje land, avseende försäljning av konsumentvaror. Denna lagstiftning kan gälla
dig, om du har köpt varan i egenskap av konsument (med konsument avses en
fysisk person som köper en vara för personligt bruk, ej relaterat till personens
yrkesmässiga verksamhet). Om du vill ha garantiservice i enlighet med denna
lagstiftning, måste du visa upp ett inköpsbevis för IBM, tillsammans med något
som tyder på att du är konsument.
44
IBM iLC300 Conference Projector: IBM iLC300 Conference Projector User’s Guide
Appendix F. Notices
IBM may not offer the products, services, or features discussed in this document in
all countries. Consult your local IBM representative for information on the
products and services currently available in your area. Any reference to an IBM
product, program, or service is not intended to state or imply that only that IBM
product, program, or service may be used. Any functionally equivalent product,
program, or service that does not infringe any IBM intellectual property right may
be used instead. However, it is the user’s responsibility to evaluate and verify the
operation of any non-IBM product, program, or service.
IBM may have patents or pending patent applications covering subject matter
described in this document. The furnishing of this document does not give you
any license to these patents. You can send license inquiries, in writing, to:
IBM Director of Licensing
IBM Corporation
North Castle Drive
Armonk, NY 10504-1785
U.S.A.
INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS
PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow disclaimer of
express or implied warranties in certain transactions, therefore, this statement may
not apply to you.
This information could include technical inaccuracies or typographical errors.
Changes are periodically made to the information herein; these changes will be
incorporated in new editions of the publication. IBM may make improvements
and/or changes in the product(s) and/or the program(s) described in this
publication at any time without notice.
The products described in this document are not intended for use in implantation
or other life support applications where malfunction may result in injury or death
to persons. The information contained in this document does not affect or change
IBM product specifications or warranties. Nothing in this document shall operate
as an express or implied license or indemnity under the intellectual property rights
of IBM or third parties. All information contained in this document was obtained
in specific environments and is presented as an illustration. The result obtained in
other operating environments may vary.
IBM may use or distribute any of the information you supply in any way it
believes appropriate without incurring any obligation to you.
Any references in this publication to non-IBM Web sites are provided for
convenience only and do not in any manner serve as an endorsement of those Web
sites. The materials at those Web sites are not part of the materials for this IBM
product, and use of those Web sites is at your own risk.
Any performance data contained herein was determined in a controlled
environment. Therefore, the result obtained in other operating environments may
© Copyright IBM Corp. 2003
45
vary significantly. Some measurements may have been made on development-level
systems and there is no guarantee that these measurements will be the same on
generally available systems. Furthermore, some measurements may have been
estimated through extrapolation. Actual results may vary. Users of this document
should verify the applicable data for their specific environment.
Trademarks
The following terms are trademarks of International Business Machines
Corporation in the United States, other countries, or both:
IBM
IBM logo
HelpCenter
Microsoft, Windows, and Windows NT are trademarks of Microsoft Corporation in
the United States, other countries, or both.
Other company, product, or service names may be trademarks or service marks of
others.
Electronic emission notices
Machine - iLC300 Conference Video Projector
Federal Communications Commission (FCC) statement
IBM Conference Projector
Note: This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause
harmful interference, in which case the user will be required to correct the
interference at his own expense.
Properly shielded and grounded cables and connectors must be used in order to
meet FCC emission limits. IBM is not responsible for any radio or television
interference caused by using other than recommended cables and connectors or by
unauthorized changes or modifications to this equipment. Unauthorized changes
or modifications could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Industry Canada Class A emission compliance statement
This Class A digital apparatus complies with Canadian ICES-003.
Avis de conformite a la reglementation d’Industrie Canada
46
IBM iLC300 Conference Projector: IBM iLC300 Conference Projector User’s Guide
Cet appareil numérique de la classe A est conform à la norme NMB-003 du
Canada.
Deutsche EMV-Direktive (electromagnetische Verträglichkeit)
Dieses Gerät ist berechtigt in Übereinstimmung mit dem deutschen EMVG vom
9.Nov.92 das EG-Konformitätszeichen zu führen.
Der Aussteller der Konformitätserklärung ist die IBM UK, Greenock.
Dieses Gerät erfüllt die Bedingungen der EN 55022 Klasse A. Für diese Klasse von
Geräten gilt folgende Bestimmung nach dem EMVG:
Geräte dürfen an Orten, für die sie nicht ausreichend entstört sind, nur mit
besonderer Genehmigung des Bundesminesters für Post und Telekommunikation
oder des Bundesamtes für Post und Telekommunikation betrieben werden. Die
Genehmigung wird erteilt, wenn keine elektromagnetischen Störungen zu erwarten
sind.
(Auszug aus dem EMVG vom 9.Nov.92, Para.3. Abs.4)
Hinweis: Dieses Genehmigungsverfahren ist von der Deutschen Bundespost noch nicht
veröffentlicht worden.
Europen Union - EMC directive
This product is in conformity with the protection requirements of EU Council
Directive 89/336/ECC on the approximation of the laws of the Member States
relating to electromagnetic compatibility.
IBM cannot accept responsibility for any failure to satisfy the protection
requirements resulting from a non-recommended modification of the product,
including the fitting of non-IBM option cards.
This product has been tested and found to comply with the limits for Class A
Information Technology Equipment according to CISPR 22/European Standard EN
55022. The limits for Class A equipment were derived for commercial and
industrial environments to provide reasonable protection against interference with
licensed communication equipment.
Warning: This is a Class A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate measures.
Union Européenne - Directive Conformité électromagnétique
Ce produit est conforme aux exigences de protection de la Directive 89/336/EEC
du Conseil de l’UE sur le rapprochement des lois des États membres en matière de
compatibilité électromagnétique.
IBM ne peut accepter aucune responsabilité pour le manquement aux exigences de
protection résultant d’une modification non recommandée du produit, y compris
l’installation de cartes autres que les cartes IBM.
Ce produit a été testé et il satisfait les conditions de l’équipement informatique de
Classe A en vertu de CISPR22/Standard européen EN 55022. Les conditions pour
Appendix F. Notices
47
l’équipement de Classe A ont été définies en fonction d’un contexte d’utilisation
commercial et industriel afin de fournir une protection raisonnable contre
l’interférence d’appareils de communication autorisés.
Avertissement : Ceci est un produit de Classe A. Dans un contexte résidentiel, ce produit
peut causer une interférence radio exigeant que l’utilisateur prenne des mesures adéquates.
Union Europea - Normativa EMC
Questo prodotto è conforme alle normative di protezione ai sensi della Direttiva
del Consiglio dell’Unione Europea 89/336/CEE sull’armonizzazione legislativa
degli stati membri in materia di compatibilità elettromagnetica.
IBM non accetta responsabilità alcuna per la mancata conformità alle normative di
protezione dovuta a modifiche non consigliate al prodotto, compresa l’installazione
di schede e componenti di marca diversa da IBM.
Le prove effettuate sul presente prodotto hanno accertato che esso rientra nei limiti
stabiliti per le le apparecchiature di informatica Classe A ai sensi del CISPR
22/Norma Europea EN 55022. I limiti delle apparecchiature della Classe A sono
stati stabiliti al fine di fornire ragionevole protezione da interferenze mediante
dispositivi di comunicazione in concessione in ambienti commerciali ed industriali.
Avvertimento: Questso è un prodotto appartenente alla Classe A. In ambiente domestico,
tale prodotto può essere causa di interferenze radio, nel qual caso l’utente deve prendere
misure adeguate.
Unione Europea - Directiva EMC (Conformidad électromagnética)
Este producto satisface los requisitos de protección del Consejo de la UE, Directiva
89/336/CEE en lo que a la legislatura de los Estados Miembros sobre
compatibilidad electromagnética se refiere.
IBM no puede aceptar responsabilidad alguna si este producto deja de satisfacer
dichos requisitos de protección como resultado de una modificación no
recomendada del producto, incluyendo el ajuste de tarjetas de opción que no sean
IBM.
Este producto ha sido probado y satisface los límites para Equipos Informáticos
Clase A de conformidad con el Estándar CISPR22 y el Estándar Europeo EN 55022.
Los límites para los equipos de Clase A se han establecido para entornos
comerciales e industriales a fin de proporcionar una protección razonable contra las
interferencias con dispositivos de comunicación licenciados.
Advertencia: Este es un producto de Clase A. En un entorno doméstico este producto
podría causar radiointerferencias en cuyo caso el usuario deberá tomar las medidas
adecuadas.
48
IBM iLC300 Conference Projector: IBM iLC300 Conference Projector User’s Guide
Appendix F. Notices
49
50
IBM iLC300 Conference Projector: IBM iLC300 Conference Projector User’s Guide
Part Number: 31P9922
Printed in U.S.A.
(1P) P/N: 31P9922
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement