Infinity Car Speaker 32.3CF User manual

Below you will find brief information for kappa 42.3i, kappa 52.3i, kappa 62.3i, kappa 63.3i, kappa 652.3i. These Kappa Series multi-element speakers are designed to be installed under factory grilles. In some cars, fuel tanks may be located directly beneath the rear deck. Before installation, make sure there is adequate speaker basket clearance before considering this location. They have a crossover for in-line connection to an amplifier output. They are required for proper operation and are color-coded to aid in correct polarity connections. Do not omit the crossover or substitute another one to avoid damage. Using low volume levels when driving is recommended.

PDF Download

Document

kappa series
42.3i,52.3i,62.3i,63.3i,
652.3i,692.3i,693.3i,
32.3cf,462.3cfp,572.3cf
instructions
Thank you
for purchasing Infinity’s Kappa Series
multi-element automotive loudspeakers. We’ve organized this
manual to make their installation as simple and trouble-free as
possible. Please read it thoroughly before proceeding. Remember
to keep your sales receipt with this manual in a safe place so
both are available for future reference.
INSTALLATION
INSTALLATION WARNINGS AND TIPS
ABOUT THESE INSTRUCTIONS
Installation of automotive stereo components
can require extensive experience with a
variety of mechanical and electrical procedures.
Although these instructions explain how to install
Kappa Series multi-element speakers in a general
sense, they do not show the exact installation
methods for your particular vehicle. If you do
not feel you have the experience, do not attempt
the installation yourself, but instead ask your
authorized Infinity car audio dealer about
professional installation options.
LOUD MUSIC AND HEARING
Playing loud music in an automobile can hinder
your ability to hear traffic as well as permanently
damage your hearing. The maximum volume levels achievable with Infinity speakers, combined
with high power amplification, may exceed safe
levels for extended listening. We recommend
using low volume levels when driving. Infinity
accepts no liability for hearing loss, bodily injury,
or property damage as a result of use or misuse
of this product.
REAR DECK PRECAUTION
In some cars, fuel tanks may be located directly
beneath the rear deck. Before installation, make
sure there is adequate speaker basket clearance
before considering this location!
ABOUT THE CROSSOVER
Except for the 462.3cfp, each Kappa Series multielement speaker includes a crossover for in-line
connection to an amplifier output and is required
for proper operation (see Figure 7 on the next
page). The attached crossover wires are keyed and
color-coded to aid in correct polarity connections.
Do not omit the crossover or substitute another
one – doing so will damage the speaker.
-2-
INSTALLATION TIPS
• Always wear protective eyewear when using
any tools.
Figure 1. Mounting the 42.3i, 52.3i, 62.3i, 63.3i,
692.3i, 693.3i, 32.3cf or 572.3cf.
• Turn off all audio components and other
electrical devices before you start. Disconnect
the (–) negative lead from your vehicle’s battery.
NOTE:The 32.3cf, 462.3cfp and 572.3cf speakers
are designed to be installed under factory grilles.
Consequently, no grilles are packaged with
these models.
• Keep speakers in their package until final
installation. When moving a speaker, always
rest it with the cone or dome facing up. Never
use force to install any speaker.
NOTE: If you are mounting the 572.3cf in a 6&quot; x 8&quot;
location, use the adapter provided.
• Check clearances on both sides of a planned
mounting surface before drilling any holes or
installing any screws. Remember that the
screws can extend behind the surface.
• At the installation sites, locate and make a
note of all fuel lines, hydraulic brake lines,
vacuum lines and electrical wiring. Use
extreme caution when cutting or drilling in
and around these areas.
• Before drilling or cutting holes, use a utility
knife to remove unwanted fabric or vinyl,
to keep material from snagging in a drill bit
or saw.
• For door installations, check the clearance
with the windows throughout the range of the
window’s travel, and verify that a mounted
speaker will not interfere with the window
crank or power window mechanism.
• If mounting speakers elsewhere, check for
clearance around rear deck torsion bars, glove
box or other structural elements.
• Do not mount speakers where they will get wet.
ROTATE TWEETER SO IT
IS ANGLED TOWARD
THE LISTENER USING
THE UNIPIVOT™
(patent no. 6,002,780)
FEATURE ON THE 52.3i,
62.3i, 652.3i, 572.3cf
AND 692.3i.
Figure 2. Modifying the 42.3i to be installed in
locations requiring fewer than 4 mounting “ears”.
(The 62.3i and 63.3i may be similarly modified.)
NOTE: Grip the tab with pliers and bend to detach
it from the speaker.
INSTALLATION
Figure 3. Mounting the 572.3cf or 462.3cfp. The
32.3cf (not shown) is mounted in a similar way.
CONNECTIONS
Figure 4. Mounting the 652.3i with the grille.
Figure 6. Mounting the 652.3i in a 165mm
speaker location.
Figure 7. Connecting an in-line crossover to a 62.3i
and an amplifier output. Other speaker
models are connected in a similar way.
NOTE:The 32.3cf, 462.3cfp, and 572.3cf speakers
are designed to be installed under factory grilles.
Consequently, no grilles are packaged with these
Kappa models.
TWEETER
ON TOP
e
s
d
e
n
ig
d
an
d in the US
eere
A
gin
En
.
M.D
.3
i
W Peak
, 225
w
Power
Han
l
dlin
g:
WOOFER
ON
BOTTOM
Computer Optimized Crossover
Note: The positions
shown here for the polarities may not resemble
the exact connections in
every installation.
However, in every case,
the larger terminal is the
positive (+) connection.
ROTATE TWEETER SO IT IS ANGLED
TOWARD THE LISTENER USING THE
UNIPIVOT™ (patent no. 6,002,780)
FEATURE ON THE 52.3i, 62.3i, 652.3i,
572.3cf AND 692.3i.
t oou ive w a y
d
W R s p eak
er
MS
na
tio
a
rn
te
In
a
rm
a
ROTATE TWEETER SO IT IS ANGLED
TOWARD THE LISTENER USING THE
UNIPIVOT™ (patent no. 6,002,780)
FEATURE ON THE 52.3i, 62.3i,
652.3i, 572.3cf AND 692.3i.
H
Figure 5. Mounting the 652.3i in a standard
speaker location.
aut
A
Figure 3a.
62
t
6 - 1/2 &quot; o m o
n
ROTATE TWEETER SO IT IS ANGLED
TOWARD THE LISTENER USING THE
UNIPIVOT™ (patent no. 6,002,780)
FEATURE ON THE 52.3i, 62.3i, 652.3i,
572.3cf AND 692.3i.
kappa series
75
pany
om
l C
Infin
ity
Sy
s
te
C.M.
m
s,
In
c
.
&yen;
D
To Amp. Output
-3-
SPECIFICATIONS
693.3i
Type:
Speaker Impedance:
Power Handling:
Sensitivity (2.83V, 1m):
Frequency Response:
Mounting Depth:
Cut-Out Diameter:
42.3i
Type:
Speaker Impedance:
Power Handling:
Sensitivity (2.83V, 1m):
Frequency Response:
Mounting Depth:
Cut-Out Diameter:
4&quot; 2-Way
4 ohms
50W RMS, 150W Peak
90dB
75Hz – 21kHz
1-3 ⁄4&quot; (45mm)
3-5 ⁄ 8&quot; (93mm)
63.3i
Type:
Speaker Impedance:
Power Handling:
Sensitivity (2.83V, 1m):
Frequency Response:
Mounting Depth:
Cut-Out Diameter:
6-1⁄2&quot; 3-Way
4 ohms
75W RMS, 225W Peak
90dB
45Hz – 22kHz
2-1⁄16&quot; (53mm)
5&quot; (127mm)
52.3i
Type:
Speaker Impedance:
Power Handling:
Sensitivity (2.83V, 1m):
Frequency Response:
Mounting Depth:
Cut-Out Diameter:
5-1⁄4&quot; 2-Way
4 ohms
55W RMS, 165W Peak
90dB
55Hz – 21kHz
2&quot; (51mm)
4-5 ⁄ 8&quot; (118mm)
652.3i
Type:
Speaker Impedance:
Power Handling:
Sensitivity (2.83V, 1m):
Frequency Response:
Mounting Depth:
Cut-Out Diameter:
165mm 2-Way
4 ohms
75W RMS, 225W Peak
90dB
45Hz – 21kHz
2-3⁄ 8&quot; (61mm)
5-1⁄2&quot; (140mm)
32.3cf
Type:
Speaker Impedance:
Power Handling:
Sensitivity (2.83V, 1m):
Frequency Response:
Mounting Depth:
Cut-Out Diameter:
62.3i
Type:
Speaker Impedance:
Power Handling:
Sensitivity (2.83V, 1m):
Frequency Response:
Mounting Depth:
Cut-Out Diameter:
6-1⁄2&quot; 2-Way
4 ohms
75W RMS, 225W Peak
90dB
45Hz – 21kHz
2-1⁄16&quot; (53mm)
5&quot; (127mm)
692.3i
Type:
Speaker Impedance:
Power Handling:
Sensitivity (2.83V, 1m):
Frequency Response:
Mounting Depth:
Cut-Out Diameter:
6&quot; x 9&quot; 2-Way
4 ohms
110W RMS, 330W Peak
90dB
35Hz – 21kHz
3-3⁄16&quot; (81mm)
5-7⁄ 8&quot; x 8-11⁄ 16&quot;
(150mm x 221mm)
462.3cfp
Type:
Speaker Impedance:
Power Handling:
Sensitivity (2.83V, 1m):
Frequency Response:
Mounting Depth:
Cut-Out Diameter:
6&quot; x 9&quot; 3-Way
4 ohms
110W RMS, 330W Peak
90dB
35Hz – 22kHz
3-3⁄16&quot; (81mm)
5-7⁄ 8&quot; x 8-11⁄ 16&quot;
(150mm x 221mm)
572.3cf
Type:
Speaker Impedance:
Power Handling:
Sensitivity (2.83V, 1m):
Frequency Response:
Mounting Depth:
Cut-Out Diameter:
5&quot; x 7&quot; 2-Way,
Custom-Fit
4 ohms
100W RMS, 300W Peak
90dB
40Hz – 21kHz
2-1⁄4&quot; (58mm)
4-15⁄ 16&quot; x 7-1⁄ 8&quot;
(126mm x 181mm)
3-1⁄2&quot; 2-Way, Custom-Fit
4 ohms
35 W RMS, 105W Peak
90dB
85Hz – 21kHz
1- 9⁄16&quot; (40mm)
3-1⁄8&quot; (80mm)
4&quot; x 6&quot; 2-Way,
Custom-Fit Plate
4 ohms
60W RMS, 180W Peak
90dB
75Hz – 21kHz
1- 3 ⁄4&quot; (45mm)
3-5⁄ 8&quot; x 5-1⁄ 4&quot;
(93mm x 134mm)
DECLARATION OF CONFORMITY
Infinity Systems, Inc., 250 Crossways Park Drive, Woodbury, NY 11797 USA
(800) 553-3332 • FAX (516) 682-3523 • www.infinitysystems.com
&copy; 2001 Infinity Systems, Inc. • P/N: KAPSEROM2/01 • Printed 2/01
&reg;
We, Harman Consumer International
2, route de Tours
72500 Chateau-du-Loir
France
declare in own responsibility, that the products described in this owner’s manual are in compliance with technical standards:
EN 50081-1:1992
Lutz Uphoff
EN 50082-1:1992
Harman Consumer International
Chateau-du-Loir, France. 2/01
">

Hello! I am an AI chatbot specifically trained to assist you with the Infinity Car Speaker 32.3CF User manual. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Show related prompts

Assistant typing

Assistant terminated

Key features

multi-element speakers
factory grille installation
in-line crossover
color-coded wiring
safe listening levels
Unipivot tweeter

Frequently asked questions

In some cars, fuel tanks may be located directly beneath the rear deck. Before installation, make sure there is adequate speaker basket clearance before considering this location.

Except for the 462.3cfp, each Kappa Series multi-element speaker includes a crossover for in-line connection to an amplifier output and is required for proper operation.

The crossover wires are keyed and color-coded to aid in correct polarity connections.

Playing loud music in an automobile can hinder your ability to hear traffic as well as permanently damage your hearing. We recommend using low volume levels when driving.

Do not omit the crossover or substitute another one – doing so will damage the speaker.