Philips Car Stereo System 15PT2302 User manual

Philips Car Stereo System 15PT2302 User manual
Operating Instructions
15PT2302
1
15PT2302/p1-4
1
7/6/01, 10:48 AM
TABLE OF CONTENTS
Introduction
Safety Information/Useful Tips .................................................................................................. 3
Before Calling Service ................................................................................................................. 4
Basic Installation/Functions
Hooking Up Your TV (Basic Connection) ............................................................................... 5
Use/Care of remote Control .................................................................................................... 5
Connecting the Audio/Video Sockets (Playback) .................................................................. 6
Connecting the Audio/Video Sockets (Recording) ............................................................... 7
Functions of Remote Control ................................................................................................... 8
Functions of TV Controls ...........................................................................................................10
TV Installation
Selecting the Menu Language...................................................................................................... 11
Automatic Tuning of Channels .................................................................................................. 12
Manual Tuning of Channels ......................................................................................................... 13
Selecting the Colour/Sound System ........................................................................................ 15
Fine Tuning Of Channels ............................................................................................................. 16
Sorting of Channels...................................................................................................................... 17
Editing of Channels........................................................................................................................ 18
Naming of Channels...................................................................................................................... 19
Features
Adjusting the TV Picture ............................................................................................................. 20
Adjusting the TV Sound ...............................................................................................................21
Activating the Timer.......................................................................................................................22
Activating the Child Lock.............................................................................................................24
Using the Screen Format ............................................................................................................ 28
Smart Picture Control .................................................................................................................29
Smart Sound Control....................................................................................................................30
Personal Zapping ...........................................................................................................................31
Automatic Picture Booster ........................................................................................................ 32
Using the Teletext.......................................................................................................................... 33
General
Specfications................................................................................................................................... 35
Recycling Directive – To minimise harm to the environment, the batteries supplied
with the TV set do not contain mercury or nickel cadmium. If possible, when
disposing of batteries, use recycling means available to you.Your TV set uses
materials which are reusable or which can be recycled. To minimise the amount of
waste in the environment, specialist companies recover used sets for dismantling
and collection of reusable materials (contact your dealer).
2
15PT2302/p1-4
2
7/6/01, 10:48 AM
SAFETY INFORMATION AND USEFUL TIPS
Safety Information
•
–
–
–
Disconnect mains plug when :
the red light below the TV screen is flashing continuously.
a bright white line is displayed across the screen.
cleaning the TV screen. Never use abrasive cleaning agents. Use a slight damp chamois
leather or soft cloth.
– there is a lightning storm.
– the set is left unattended for a prolonged period of time.
•
No naked flame sources, such as lighted candles, should be placed on top of the TV or
in the vicinity.
•
Do not place your TV set under direct sunlight or heat.
•
Leave at least 5 cm around each side of TV set to allow for proper ventilation.
•
Avoid placing your set (e.g. near the window) where it is likely to be exposed to rain
or water.
•
No objects filled with liquids should be placed on top the TV so as to avoid dripping
or splashing of liquids on the set.
Useful Tips
•
Do not leave your set on standby mode for a prolonged period of time. Switch off set
to allow it to be demagnetised. A demagnetised set supports good picture quality.
•
Do not shift or move the set around when it is switched on. Uneveness in colour in
some parts of the screen may occur.
•
Never attempt to repair a defective TV yourself. Always consult a skilled service
personnel.
3
15PT2302/p1-4
3
7/6/01, 10:48 AM
BEFORE CALLING SERVICE
Below is a list of frequently occurred symptoms. Before you call for service, make these simple
checks. Some of these symptoms can easily be rectified if you know what to do.
Symptom
What you should do
Colour patch
(uneveness)
• Switch off the TV by the mains power button. Wait for 20
minutes before switching on again.
• Check the TV is not placed too near speakers or magnetic
objects.
No power
• Check the TV’s AC power cord is plugged into the mains
socket. If there is still no power, disconnect plug. Wait for
60 seconds and re-insert plug. Switch on the TV again.
No picture
• Check the antenna connection at the rear of the TV.
• Possible TV station problem. Try another channel.
Good picture
but no sound
• Try increasing the volume.
• Check that the sound is not muted. If it is muted, press the
Mute button on the remote control to restore sound.
Good sound but poor
colour or no picture
• Try increasing the contrast and brightness setting.
Snowish picture and
noise
• Check antenna connection at the rear of the TV.
Horizontal dotted lines
• Possible electrical interference e.g. hairdryer, vacuum
cleaner, etc. Switch off appliances.
Double images or
“Ghost” images
• Possible poor positioning of antenna. Using a highly
directional antenna may improve reception.
TV not responding to
remote control handset
• Check life span of batteries of remote control handset.
• Aim remote control handset directly at remote control
sensor lens on the TV.
4
15PT2302/p1-4
4
7/6/01, 10:48 AM
HOOKING UP YOUR TV (BASIC CONNECTION)
Antenna Connection
• Connect the aerial plug to the antenna socket ¬
on the backcover.
75 Ω
g
• Insert the mains plug into the wall socket.
Mains Connection
• For correct mains voltage, refer to type sticker at
the rear of the TV set
• Consult your dealer if mains supply is different.
Note : This diagram is not representative of the
actual plug and socket.
Switching on the Set
• Press the main power button to switch on/
off the TV.
• If the set is on standby (indicator is red),
press the Power button on the remote
control to switch on set.
USE/CARE OF REMOTE CONTROL
• Insert the correct type of batteries into the
compartment.
• Ensure the batteries are placed in the right
direction.
+
–
5
15PT2302/p5-10
5
7/6/01, 3:17 PM
CONNECTING THE AUDIO/VIDEO SOCKETS (PLAYBACK)
AV2
in
Monitor AV1
out
in
VIDEO
L
S-VIDEO
AUDIO
AV sockets on
rear of TV
R
VCR (Equipped with
Video and Audio
Output sockets
OUT
OUT
OUT
VIDEO
L AUDIO
Back of VCR
ANTENNA
IN
R
IN
IN
You can view the playback of VCR tapes (Video Disc players, camcorders, etc.) by using the AUDIO
and VIDEO INPUT sockets on the rear of the TV.
– Connect the VIDEO and AUDIO IN sockets on the rear of the TV to the AUDIO and
VIDEO OUT sockets on the VCR.
Monitor
out
AV2
in
AV1
in
VIDEO
L
AV sockets on
rear of TV
S-VIDEO
AUDIO
R
Back of VCR
OUT
L
AUDIO
IN
OUT
R
VIDEO
OUT
S-VIDEO
OUT
ANTENNA
IN
IN
The S-Video connection on the rear of the TV is used for the playback of S-VHS VCR tapes,Video Discs,
Video Games or Compact Disc-Interactive (cd-i) discs. Better picture detail and clarity is possible with
the S-Video playback as compared to the picture from a normal antenna (RF) connection.
– Connect the S-VIDEO socket on the rear of the TV to the S-VHS OUT socket on a
S-VHS VCR.
– Connect the AUDIO IN sockets from the rear of the TV to the AUDIO OUT sockets
on the VCR. Note : You need not connect the VIDEO IN socket of the TV if S-VIDEO IN
socket is connected.
6
15PT2302/p5-10
6
7/6/01, 11:36 AM
CONNECTING THE AUDIO/VIDEO SOCKETS (RECORDING)
Connection for recording from the TV channel
AV1
in
Monitor
out
AV2
in
AV sockets on
rear of TV
VIDEO
L
S-VIDEO
AUDIO
R
Back of VCR
OUT
OUT
ANTENNA
VIDEO
OUT
L
R
IN
IN
IN
AUDIO
VCR (Equipped
with Video and
Audio Input
sockets
– Connect the corresponding INPUT sockets of the VCR to the MONITOR OUTPUT
sockets on the rear of the TV.
– To enhance the sound of your TV, connect the AUDIO L and R sockets to an external audio
system instead of the VCR. For mono equipment, connect only the AUDIO L socket.
Connection for recording from one VCR to another VCR
AV sockets on rear of TV
Monitor
out
AV1
in
AV2
in
VIDEO
L
S-VIDEO
AUDIO
R
OUT
OUT
ANTENNA
VIDEO
OUT
Back of VCR
IN
IN
L
AUDIO
OUT
OUT
ANTENNA
VIDEO
IN
R
IN
OUT
L
AUDIO
R
IN
IN
VCR (Equipped
with Video and
Audio Input
sockets
VCR (Equipped
with Video and
Audio Output
sockets
– Connect the sockets of the VCR which you wish to record from, to the corresponding
sockets at either AV1 or AV2
– Connect the sockets of the receiving VCR to the MONITOR OUTPUT sockets on the
rear of the TV.
7
15PT2302/p5-10
7
7/6/01, 11:37 AM
FUNCTIONS
OF
REMOTE CONTROL
& Power button
– Switch set off temporarily to standby mode.
&
(The red light indicator lights up when the set
is on standby mode).
é
– To switch on set from standby mode, press
“
Channel +/– , Digit (0 -9) or Power button.
é Teletext Colour/Personal Zapping buttons
‘
– In teletext mode, the colour buttons allow you to
(
access directly an item or corresponding pages.
§
– As Personal Zapping buttons, you can surf up to
è
10 personal channels for each button. For detailed
!
description of functions, refer to section on
“Personal Zapping ”.
ç
“ Teletext buttons
0
Allows you to access teletext information. For
detailed description of functions, refer to section
on “Using the Teletext”
1
‘ Smiley button
2
Allows to add and store your personal preference
channels in your Personal Preference list. For
detailed description of functions, refer to section
on “Using your Personal Zapping feature”.
( Timer Button
Allows you to set the clock to switch to another
channel at a specified time while you are watching
another channel or when the set is on standby mode.
§ Smart Sound Button
Press the Smart Sound button repeatedly to
access 4 different types of sound settings and
choose your desired setting.
è Menu Button
Displays the main menu. Also exits menu from screen.
! Cursor Up Button
Allows you to select the next item on the menu.
ç Cursor Left Button
Allows you to select the sub-menus and adjust the settings.
0 Volume + / – Button
Increases or decreases volume.
1 4
Allows you to switch from Stereo to Mono sound during
stereo transmission or to choose between language5or
language6during dual sound transmission.
2 A/CH(Alternate channel) Button
Allows you to change between the current
channel and the previous channel.
8
15PT2302/p5-10
8
7/6/01, 11:37 AM
FUNCTIONS
3
4
5
6
7
8
9
20
21
22
23
24
25
OF
REMOTE CONTROL
3 Main Index Button
In teletext mode, press button to return to the
main index page.
4 Frownie button
Allows to delete stored personal preference
channels in your Personal Preference list. For
detailed description of functions, refer to section on
“Personal Zapping ”.
5 Smart Picture Button
Press the Smart Picture button repeatedly to
access 5 different types of picture settings and
choose your desired setting.
61Incredible Surround Button
–
Allows you to select Incredible Surround sound
when transmission is in stereo mode.
– Allows you to select Spatial Sound when
transmission is in mono mode.
71\Cursor Right Button
Allows you to access the sub-menus and adjust
the settings.
8 Cursor Down Button
Allows you to select the next item on the menu.
9 Channel + / – Buttons
Allows you to select channels in ascending or
descending order.
20 Mute Button
Mutes sound. To restore sound, press button again.
21 Teletext Button
Refer to section on “Using the Teletext”
22 OSD button
Allows you to display the current channel number.
It also allows to exit menu from the screen after
control adjustments.
23 Digit (0 -9) Buttons
Press to select a channel. For a 2-digit channel
number, press the first digit and followed
immediately by the second digit.
24 A/V Button
Allows you to select the AV channels.
25 Sleeptimer Button
Allows you to select a time period after which the
setwill switch to standby mode automatically.
9
15PT2302/p5-10
9
7/6/01, 11:37 AM
FUNCTIONS OF TV CONTROLS
Push catch of lid
upwards to open
front controls cover
INSTALL MENU
3
;
&
VIDEO
L AUDIO
é“‘
R
– VOLUME
( §
+
¸ CHANNEL ˚
7
&
Mains Power button
Switch mains power on or off.
é
Standby light indicator
Indicate red light when standby mode is activated.
“
Remote Sensor
Acts as a sensor for activating the controls of the
TV when remote control handset is aimed at it.
‘
Headphone socket
Connect headphone jack to socket for personal
listening.
(
AV “in” sockets
Connect to Video “out” and Audio “sockets”
to VCR, VCD, etc. (For more details on
connection, refer to section “Connecting the
Audio/Video Sockets”).
§
Volume – / + buttons
Adjust sound volume softer/louder.
Channel ¸/ ˚ buttons
Select channel in ascending/descending order.
7
Note
• You can enter the main menu by pressing both the Volume – and + buttons
at the same time.
• Press the Channel ¸/ ˚ button to select the next item on the menu.
• Press Volume – / + button to access sub-menu and adjust the settings.
10
15PT2302/p5-10
10
7/6/01, 11:37 AM
SELECTING THE MENU LANGUAGE
Operating instructions generally explains the operation of the TV
set using the buttons on the remote control unless otherwise stated.
Please read the following instructions carefully and follow the steps
as shown to familiarise yourself with the installations and all features
available in your set.
The Language feature allows you to set the TV’s on-screen menu to be shown in your
desired language.
Step
Press button
MENU
Result on TV Screen
Enter main menu.
Main
✔ Picture
■ Sound
■ Features
■ Install
o
π
Brightness
Colour
Contrast
Sharpness
Colour Temp.
More...
œ
¸
Select Install.
Main
■ Picture
■ Sound
■ Features
✔ Install
o
π
Language
Auto Store
Manual Store
Sort
Channel Edit
Name
œ
˙
Enter the Install menu.
˙
Press button repeatedly to cycle
through the language list and
select the language of your choice.
m
Exit menu from screen.
Install
o
✔ Language
English
■ Auto Store
■ Manual store
■ Sort
■ Channel Edit
■ Name
œ
AUTOMATIC TUNING
11
15PT2302/p11-19
11
7/6/01, 1:31 PM
π
AUTOMATIC TUNING OF CHANNELS
Automatic tuning of channels allows you to store each programme automatically.
Step
Press button
MENU
Result on TV Screen
Enter main menu.
Main
✔ Picture
■ Sound
■ Features
■ Install
o
π
Brightness
Colour
Contrast
Sharpness
Colour Temp.
More...
œ
¸
Press button repeatedly until
Install is selected.
Main
■ Picture
■ Sound
■ Features
✔ Install
o
π
Language
Auto Store
Manual Store
Sort
Channel Edit
Name
œ
˙
Enter install menu.
¸
Select Auto Store.
˙
Install
o
✔ Language
π English
■ Auto Store
■ Manual store
■ Sort
■ Channel Edit
■ Name
œ
Install
o
■ Language
✔ Auto Store
■ Manual store
■ Sort
■ Channel Edit
■ Name
œ
Start automatic tuning of
channels.
Auto Store
■ Channel
■ TV
When tuning is completed,
exit menu from screen.
12
15PT2302/p11-19
12
1
142 MHz
♦♦♦♦♦♦♦♦♦♦♦♦♦♦π♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦
Install
o
■ Language
✔ Auto Store
■ Manual store
■ Sort
■ Channel Edit
■ Name
œ
m
π
7/6/01, 1:31 PM
π
MANUAL TUNING OF CHANNELS
Manual tuning of channels allows you to select your preferred channel number for every
available programme.
Step
Press button
MENU
Result on TV Screen
Main
✔ Picture
■ Sound
■ Features
■ Install
Enter main menu.
o
π
Brightness
Colour
Contrast
Sharpness
Colour Temp.
More...
œ
¸
Press button repeatedly until
Install is selected.
Main
■ Picture
■ Sound
■ Features
✔ Install
o
π
Language
Auto Store
Manual Store
Sort
Channel Edit
Name
œ
˙
¸
˙
¸
Install
o
✔ Language
π
■ Auto Store
■ Manual Store
■ Sort
■ Channel Edit
■ Name
œ
Enter install menu.
Press button repeatedly until
Manual Store is selected.
Enter manual store menu.
Press button repeatedly until
Search is selected.
Install
o
■ Language
Colour System
■ Auto Store
Sound System
✔ Manual Store π Search
■ Sort
Channel No.
■ Channel Edit
Fine Tune
■ Name
Store
œ
Manual Store
o
■ Colour System
■ Sound System
✔ Search
■ Channel No.
■ Fine Tune
■ Store
œ
MANUAL TUNING OF
13
15PT2302/p11-19
13
English
7/6/01, 1:31 PM
79 MHz π
MANUAL TC
UNING
HANNELS
OF CHANNELS
Step
Press button
˙
¸
9
1
4
7
10
11
12
2
5
8
0
¸
˙
m
3
6
9
Result on TV Screen
Start manual searching. Searching
stops once a transmitting signal is
found.
Manual Store
o
■ Colour System
■ Sound System
128 MHz π
✔ Search
■ Channel
■ Fine Tune
■ Store
œ
Select Channel.
Manual Store
o
■ Colour System
■ Sound System
■ Search
2
✔ Channel
■ Fine Tune
■ Store
œ
Key in the channel number.
Press button repeatedly until
Store is selected.
Store tuned channel.
Note : If you want to
continue searching for
another transmitting
channel, repeat steps
7 to 11.
Manual Storeo
■ Colour System
■ Sound System
■ Search
■ Channel
■ Fine Tune
✔ Store
œ
Manual Storeo
■ Colour System
■ Sound System
■ Search
■ Channel
■ Fine Tune
✔ Store
œ
Exit menu from screen.
14
15PT2302/p11-19
14
7/6/01, 1:31 PM
π
Store?π
Stored
SELECTING THE COLOUR/SOUND SYSTEM
This feature allows you to select your desired Colour and Sound system. If Auto
is selected, the respective colour and sound system will be automatically selected according
to the transmission system. Note : Select your desired colour and sound system manually if
reception is poor at Auto mode.
Step
Result on TV Screen
Press button
Repeat step 1
to step 5 as in
“Manual Tuning
of TV Channels”
Colour System is selected.
Manual Store
✔ Colour System
■
Sound System
■
Search
■
Channel
■
Fine Tune
■
Store
o
Auto π
œ
˝
Select the desired colour
system (Auto, PAL,
NTSC 3.58, NTSC 4.43
or SECAM).
or
˙
Manual Store
✔ Colour System
■
Sound System
■
Search
■
Channel
■
Fine Tune
■
Store
o
PAL
π
œ
Press button repeatedly
until STORE is selected.
¸
˙
9
Store selected system.
Proceed to select Sound
System.
¸
or
˚
Manual Store
■
Colour System
■
Sound System
■
Search
■
Channel
■
Fine Tune
✔ Store
Manual Store
■
Colour System
✔ Sound System
■
Search
■
Channel
■
Fine Tune
■
Store
o
Stored
œ
o
Auto π
œ
10
˝
Select the desired sound
system (Auto, BG, I,
DK or M.
or
˙
Manual Store
■
Colour System
✔ Sound System
■
Search
■
Channel
■
Fine Tune
■
Store
o
DK
π
œ
11
¸
12
˙
13
m
Press button repeatedly
until STORE is selected.
Store selected system.
Manual Store
■
Colour System
■
Sound System
■
Search
■
Channel
■
Fine Tune
✔ Store
Exit menu from screen.
15
15PT2302/p11-19
15
7/6/01, 1:31 PM
o
Stored
œ
FINE TUNING OF CHANNELS
This feature allows you to adjust picture reception in areas of weak reception.
Step
Press button
MENU
Result on TV Screen
Enter main menu.
o
π
Main
✔ Picture
■ Sound
■ Features
■ Install
Brightness
Color
Contrast
Sharpness
Tint
More...
œ
¸
Press button repeatedly until
Install is selected.
Main
■ Picture
■ Sound
■ Features
✔ Install
o
Language
Auto Store
Manual Store
Sort
Channel Edit
Name
π
œ
˙
¸
˙
¸
˙
or
Enter install menu.
Press button repeatedly until
Manual Store is selected.
Enter manual store menu.
Press button repeatedly until
Fine Tune is selected.
Fine tune until the best reception
is obtained.
˝
¸
9
10
˙
m
Select Store.
Store last fine-tuned status.
Install
■ Language
■ Auto Store
✔ Manual Store
■ Sort
■ Channel Edit
■ Name
Manual Storeo
■ Colour System
■ Sound System
■ Search
■ Channel No.
✓ Fine Tune p❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘❘ ❘ ❘ ❘ ❘ π
■ Store
œ
Manual Storeo
■ Colour System
■ Sound System
■ Search
■ Channel No.
■ Fine Tune
✔ Store
œ
Exit menu from screen.
16
Colour System
Sound System
π Search
Channel
Fine Tune
Store
œ
Manual Storeo
■ Colour System
■ Sound System
■ Search
■ Channel
✓ Fine Tune p❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ π
■ Store
œ
16
15PT2302/p11-19
o
7/6/01, 1:31 PM
Stored
SORTING OF CHANNELS
This feature rearranges channel numbers.
Step
Press button
Result on TV Screen
MENU
Main
■ Picture
■ Sound
■ Features
✔ Install
¸
˙
¸
˙
¸
or
Enter main menu.
Press button repeatedly until
Install is selected.
Enter install menu.
Press button repeatedly until
Sort is selected.
Enter sort mode.
Select the channel number you want
to change from (e.g. 002).
˚
˙
¸
9
10
˝
m
Confirm selection.
Select the channel number you want
to change to (e.g. 005).
Confirm selection.
The change is done.
Note : Channel numbers 5, 4 and 3
will move upwards accordingly. that
is, Channel 5 will move up to Channel
4, Channel 4 to 3 and Channel 3 to 2.
Install
o
■ Language
■ Auto Store
■ Manual Store
π
✔ Sort
■ Channel Edit
■ Name
œ
000
001
002
003
004
005
Install
o
■ Language
■ Auto Store
■ Manual Store
π
✔ Sort
■ Channel Edit
■ Name
œ
000
001
002
003
004
005
Install
o
■ Language
■ Auto Store
■ Manual Store
π
✔ Sort
■ Channel Edit
■ Name
œ
000
001
002
003
004
005
π
p
Install
o
■ Language
■ Auto Store
■ Manual Store
π
✔ Sort
■ Channel Edit
■ Name
œ
000
001
002
003
004
005
p
Install
o
■ Language
■ Auto Store
■ Manual Store
π
✔ Sort
■ Channel Edit
■ Name
œ
000
001
002
003
004
005
π
Exit menu from screen.
17
π
Language
Auto Store
Manual Store
Sort
Channel Edit
Name
œ
17
15PT2302/p11-19
o
7/6/01, 1:31 PM
EDITING OF CHANNELS
This feature allows you to skip or edit channels which have bad or weak TV signal or channels
that you do not watch often. Note : Once a channel is skipped, you cannot have access to it by
theCH (Channel) + or – button. You can only have access to the channel by the Digit (0 -9)
buttons.
Step
Press button
Result on TV Screen
Enter main menu.
MENU
Press button repeatedly until
Install is selected.
¸
Main
■ Picture
■ Sound
■ Features
✔ Install
o
Language
Auto Store
Manual Store
Sort
Channel Edit
Name
π
œ
˙
1
4
7
Enter install menu.
¸
Press button repeatedly until
Channel Edit is selected.
˙
Enter Channel Edit menu.
2
5
8
0
¸
˙
3
6
9
Key in the channel number to be
skipped.
Install
o
■ Language
Channel
■ Auto Store
Skipped
■ Manual Store
■ Sort
✔ Channel Edit π
■ Name
œ
Channel Edit
✔ Channel
■ Skipped
o
2
œ
Channel Edit
■ Channel
✔ Skipped
Select Skipped.
o
On
Select On to skip channel.
œ
9
m
Exit menu from screen.
HOW TO RESTORE SKIPPED CHANNELS
• Repeat Steps 1 to 5 as in”Editing of Channels”.
• Key in the channel number to be restored by the
Digit (0 - 9) button.
• Select Skipped by the Cursor Down button.
• Select Off to restore channel by the Cursor Right button.
• Exit menu from screen by the OSD button.
Channel Edit
■ Channel
✔ Skipped
18
Off
œ
18
15PT2302/p11-19
o
7/6/01, 1:31 PM
π
NAMING OF CHANNELS
This feature enables you to name or rename channels.
Step
Press button
Result on TV Screen
MENU
Enter main menu.
¸
Press button repeatedly until
Install is selected.
Main
■ Picture
■ Sound
■ Features
✔ Install
o
π
Language
Auto Store
Manual Store
Sort
Channel Edit
Name
œ
˙
¸
˙
˚
or
Enter install menu.
Press button repeatedly until
Name is selected.
Enter name mode.
Select the channel you want to
name.
¸
˙
˚
or
¸
9
m
Move to first character slot.
A cursor appears for you to start
the input of characters. Select the
character you want. Move to next
character slot by the Cursor Right
button and select the next character.
You can enter up to a maximum of 5
characters. After naming the channel,
press Cursor Right button repeatedly
until name appears on the top left
hand corner of the screen.
Install
o
■ Language
■ Auto Store
■ Manual Store
■ Sort
■ Channel Edit
π
✔ Name
œ
000
001
002
003
004
005
Install
o
■ Language
■ Auto Store
■ Manual Store
■ Sort
■ Channel Edit
π
✔ Name
œ
000
001
002
003π
004
005
Install
o
■ Language
■ Auto Store
■ Manual Store
■ Sort
■ Channel Edit
π
✔ Name
œ
000
001
002
003π
004
005
Exit menu from screen.
19
15PT2302/p11-19
19
7/6/01, 1:31 PM
ADJUSTING THE TV PICTURE
The picture menu allows you to make adjustments to the picture.
Step
Result on TV Screen
Press button
MENU
˙
˚
Display the main menu on screen.
Enter Picture menu.
Select item.
or
¸
˝
or
Adjust level or select desired
setting.
˙
m
o
π Brightness
Colour
Contrast
Sharpness
Colour Temp
More...
œ
Picture
o
✔ Brightnessp❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ 59π
■ Colour
■ Contrast
■ Sharpness
■ Colour Temp
■ NR
œ
Picture
o
✔ Colour
p❘❘❘❘❘❘❘❘❘❘❘ ❘ ❘❘❘❘❘❘❘❘❘❘❘ 59π
■ Contrast
■ Sharpness
■ Colour Temp
■ NR
■ Contrast +
œ
Main
✔ Picture
■ Sound
■ Features
■ Install
Exit menu from screen.
Picture menu items
Activities
Brightness
Increase or decrease brightness level.
Colour
Increase or decrease color level.
Contrast
Increase or decrease contrast level.
Sharpness
Increase or decrease sharpness level to improve detail
in picture.
Color temperature
Choose from 3 settings (Normal, Warm or Cool).
NR (Noise Reduction)
Select “On” to reduce “noisy” picture (little dots on
picture) due to weak signal.
Contrast +
Select “On” to allow you to optimise the total contrast
for improved picture quality.
20
15PT2302/p20-21
20
7/6/01, 1:35 PM
ADUSTING THE TV SOUND
The sound menu allows you to make adjustments to the sound.
Step
Press button
Result on TV Screen
Display the main menu on screen.
MENU
¸
Select Sound menu.
˙
Enter Sound menu.
˚
Select item.
¸
or
o
π Brightness
Colour
Contrast
Sharpness
Colour Temp.
More...
œ
Main
o
■
Picture
Treble
Sound
π Bass
✔
■ Features
Balance
■ Install
AVL
Incr. Surround
Ultra Bass
œ
Sound
o
✔ Treble
p❘❘❘❘❘❘❘❘❘❘❘ ❘ ❘❘❘❘❘❘❘❘❘❘❘ 0π
■ Bass
■ Balance
■ AVL
■ Incr. Surround
■ Ultra Bass
œ
or
˝
Main
✔ Picture
■ Sound
■ Features
■ Install
Adjust level or select desired
setting.
˙
m
Exit menu from screen.
Sound menu items
Activities
Treble
Increase or decrease high frequency level.
Bass
Increase or decrease low frequency level.
Balance
Increase or decrease to adjust balance level.
AVL (Auto Volume Leveller)
Select On to enable volume to remain at a predetermined level should there be a sudden change in
volume during commercial breaks or channel switching.
Incredible Surround
Select between Mono and Spatial sound when
transmission is in Mono and between Stereo and
Incredible Surround sound when transmission in Stereo.
Ultra Bass
Select On to enjoy enhanced bass output.
21
15PT2302/p20-21
21
7/6/01, 1:35 PM
USING THE TIMER
The Timer feature allows you to set the timer to switch to another channel at a specified
time while you are watching another channel or when the TV is on standby mode.
Note : For the timer to function, the set must not be switched off. Once the set is switched
off, the timer is disabled.
Step
Press button
Result on TV Screen
MENU
Display the main menu on screen.
¸
Select Features.
o
π Brightness
Colour
Contrast
Sharpness
Colour Temp.
More...
œ
Main
✔ Picture
■ Sound
■ Features
■ Install
Main
■ Picture
■ Sound
✔ Features
■
Install
o
Timer
Child Lock
π Format
AutoPic. Booster
œ
˙
Enter the Features menu.
Features
o
✔ Timer
π
■ Child Lock
■ Format
■ AutoPic. Booster
Time
Start Time
Stop Time
Channel
Activate
Display
œ
˙
1
4
7
2
5
8
0
Enter Timer menu.
3
6
9
7
2
5
8
0
3
6
9
Timer
o
✔ Time
π
■ Start Time
■ Stop Time
■ Channel
■ Activate
■ Display
œ
Timer
o
■
Time
✔ Start Timeπ
■ Stop Time
■ Channel
■ Activate
■ Display
œ
Select Start Time.
¸
1
4
Key in the current time starting from
the hour follow by minute.
This is the time where the “start time”
and “stop time” will take reference
from.
Key in the time you want the
programme to be switched on.
22
15PT2302/p22-28
22
7/6/01, 1:39 PM
08:30
10:30
USING THE TIMER
Select Stop Time.
¸
9
1
4
7
10
11
2
5
8
0
3
6
9
1
4
7
2
5
8
0
¸
13
˙
14
¸
15
˙
m
Key in the time you want the
programme to be switched off.
Select Channel.
¸
12
16
Result on TV Screen
Press button
Step
3
6
9
Key in the channel you want to
switch to.
Select Activate.
Activate timer.You can select
Once, Daily or Off.
Select Display.
Select On mode if you want to
display the time on the TV screen.
Timer
o
■
Time
■ Start Time
✔ Stop Time π 12:30
■ Channel
■ Activate
■ Display
œ
Timer
o
■
Time
■ Start Time
■ Stop Time
π
✔ Channel
■ Activate
■ Display
œ
Timer
o
■
Time
■ Start Time
■ Stop Time
■ Channel
π
✔ Activate
■ Display
œ
Timer
o
■
Time
■ Start Time
■ Stop Time
■ Channel
■ Activate
π
✔ Display
œ
5
Once
On
Exit menu from screen.
Note :
• After the Stop Time is activated, the TV will go to standby mode
immediately.
• If Stop Time is not keyed in, the set will go to standby mode after
2 hours.
• To switch on set from standby mode, press Channel +/–,
Digit (0 -9) or Power button.
23
15PT2302/p22-28
23
7/6/01, 1:39 PM
ACTIVATING THE CHILD LOCK (ACCESSCODE)
The Child Lock feature allows you to lock channels to prevent your children from watching
programmes you deem undesirable.
Note :You can only have access to the locked channels via the remote control. Keep the
remote control out of reach so as to prevent your children from having access to it.
Step
Press button
Result on TV Screen
Display the main menu on screen.
MENU
Press button repeatedly until
Features is selected.
¸
Main
■ Picture
■ Sound
✔ Features
■
Install
o
Timer
Child Lock
π Format
œ
˙
Enter the Features menu.
Select Child Lock.
¸
Features
o
■ Timer
✔ Child Lock π
■ Format
œ
˙
1
4
7
1
4
7
1
4
7
9
2
5
8
0
2
5
8
0
2
5
8
0
m
Enter Child Lock mode.
3
6
9
Key in the 4-digit access code.
For the first time or if you have
forgotten the access code, enter
the universal access code 0711
twice. It will now prompt you to
key in a New Code.
3
6
9
Key in your preferred code (4-digit).
3
6
9
Key in the new code the second
time to confirm code.
Features
o
■ Timer
Access Code
✔ Child Lock π
xxxx
■ Format
Correct
œ
Features
o
■ Timer
New Code
✔ Child Lock π
xxxx
■ Format
œ
The Child Lock menu will now
appear. You can proceed to lock
channel (refer to section on
“Lock Channel”). If not, exit menu
from screen.
Features
o
■ Timer
Confirm Code
✔ Child Lock π
xxxx
■ Format
Confirmed
Child Lock
o
■ Lock Channel π
œ
■ Change Code
■ Clear All
■ Lock All
œ
Note : After you have exit menu from screen and you want to
enter the child lock menu again, you need to key the new
access code only once.
24
15PT2302/p22-28
24
7/6/01, 1:39 PM
002
003
004
005
006
007
ACTIVATING THE CHILD LOCK (CHANGE CODE)
Note : You need to key the access code only once.
Step
Result on TV Screen
Press button
Repeat Steps 1 to 8 as
in “ACTIVATING THE
CHILD LOCK
(ACCESS CODE)”
The Child Lock menu will
now appear. You can proceed
to change code.
Child Lock
o
✔ Lock Channel π
■ Change Code
■ Clear All
■ Lock All
002
003
004
005
006
007
œ
9
10
¸
Select Change Code.
˙
Enter change code mode.
Child Lock
o
■ Lock Channel
New Code
✔ Change Code π ---■ Clear All
■ Lock All
œ
11
1
4
7
2
5
8
0
3
6
9
Key in your preferred code
(4-digit).
Child Lock
o
■ Lock Channel
New Code
✔ Change Code π xxxx
■ Clear All
■ Lock All
œ
12
1
4
7
2
5
8
0
3
6
9
Key in the new code the
second time to confirm
code.
Child Lock
o
■ Lock Channel
Confirm Code
✔ Change Code π xxxx
■ Clear All
Confirmed
■ Lock All
œ
13
m
Exit menu from screen.
25
15PT2302/p22-28
25
7/6/01, 1:39 PM
ACTIVATING THE CHILD LOCK (LOCK CHANNEL)
Step
Result on TV Screen
Press button
Repeat Steps 1 to 8 as
in “CHILD Lock (ACCESS
CODE)”
The Child Lock menu will
now appear. You can proceed
to lock channel.
Child Lock
o
✔ Lock Channel π
■ Change Code
■ Clear All
■ Lock All
002
003
004
005
006
007
œ
9
˙
Enter lock channel mode.
Child Lock
o
✔ Lock Channel π
■ Change Code
■ Clear All
■ Lock All
002
003
004
005
006
007 π
œ
10
Select the channel you want
to lock.
˚
or
¸
Child Lock
o
✔ Lock Channel π
■ Change Code
■ Clear All
■ Lock All
002
003
004
005
006 π
007
œ
11
12
˙
Activate blocking of channel.
A keylock symbol will appear
beside the channel number
indicating that it is locked.
Note : To lock more than one
channel, repeat Steps 10 to 11
before exiting menu from
screen.
Child Lock
o
✔ Lock Channel π
■ Change Code
■ Clear All
■ Lock All
œ
Exit menu from screen.
m
26
15PT2302/p22-28
26
7/6/01, 1:39 PM
002
003
004
005
006 π F
007
ACTIVATING THE CHILD LOCK (LOCK ALL)
You can choose to lock all channels in the Lock All mode in the Child Lock menu.
Step
Press button
Repeat Steps 1 to 8 as
in “CHILD Lock (ACCESS
CODE)”
Result on TV Screen
The Child Lock menu will
now appear. You can proceed
to lock all channels.
Child Lock
o
✔ Lock Channel π
■ Change Code
■ Clear All
■ Lock All
002
003
004
005
006
007
œ
9
¸
10
˙
Select Lock All.
Select the On option to
lock all channels.
Child Lock
o
■ Lock Channel
■ Change Code
■ Clear All
■ Lock All
π
On
œ
11
m
Exit menu from screen.
ACTIVATING THE CHILD LOCK (CLEAR ALL)
To unlock channels that you have locked, enter the Child Lock menu and select the Off option
Clear All mode.
Step
Press button
Repeat Steps 1 to 8 as
in “CHILD Lock (ACCESS
CODE)”
Result on TV Screen
The Child Lock menu will
now appear. You can proceed
to clear all channels.
Child Lock
o
✔ Lock Channel π
■ Change Code
■ Clear All
■ Lock All
002
003
004
005
006
007
œ
9
10
Select Clear All.
¸
Select the Off option to
unlock all channels.
˙
Child Lock
o
■ Lock Channel
■ Change Code
✔ Clear All
π
■ Lock All
œ
11
Exit menu from screen.
m
27
15PT2302/p22-28
27
7/6/01, 1:39 PM
Off
USING THE SCREEN FORMAT
You can have a choice of two formats for your viewing pleasure, namely : - 4:3 mode and the
EXPAND 4:3 mode through the FORMAT menu.
Step
Press button
MENU
¸
Result on TV Screen
Display the main menu on screen.
Press button repeatedly until
Features is selected.
Main
■ Picture
■ Sound
✔ Features
■
Install
o
Timer
Child Lock
π Format
AutoPic. Booster
œ
˙
¸
Enter the Features menu.
Press button repeatedly umtil
Format is selected.
Features
o
■ Timer
■ Child Lock
✔ Format
4:3
■ AutoPic Booster
π
œ
˙
Press the button repeatedly to
cycle through the different formats
(4:3 or Expand 4:3) and select
your desired format.
Features
o
■ Timer
■ Child Lock
✔ Format
4:3 Expand π
■ AutoPic Booster
œ
m
Exit menu from screen.
When to use the Screen Formats
4:3 format
Select the 4:3 format if you want to
display the 4:3 picture using the full
surface of the screen.
Expand 4:3 format
➩
Select the Expand 4:3 format if you
want to expand movie images
recorded in the letterbox format.
When this format is selected, the
black horizontal bars at the top and
bottom are expanded thus filling
up the entire TV screen.
➩
➩
28
15PT2302/p22-28
28
7/6/01, 1:39 PM
SMART PICTURE CONTROL
Whether you are watching a movie or video game, your TV has automatic video control
settings matched to your current program source or content. The Smart Picture feature quickly
resets your TV’s video controls of program for a number of different types of programs and
viewing conditions you may have in your home. Each Smart Picture setting is preset at the
factory to automatically adjust the TV’s Brightness, Colour, Picture and Sharpness levels.
Step
Press button
Press botton repeatedly to cycle through the 5 settings namely,
DVD/VCD, Rich, Natural, Soft and Personal and select
your desired picture setting.
`
m
Exit menu from screen.
Defintion of Picture Settings
DVD/VCD
: For optimal picture setting, whenever
the source is connected to DVD/VCD
player, select DVD/VCD setting for AV
mode.
Rich
: Emphasize very vibrant colours. This
setting is the optimal setting when you
are viewing TV programmes in a
brightly-lit room.
Natural
: Emphasize original colours.
Soft
: Emphasize “warm” colours.
(Suitable for dimly-lit room condition and
gives cinema-like effect when light is
switched off).
Personal
DVD/VCD
Rich
Natural
Soft
: Picture settings are set to your preference.
Personal
29
15PT2302/p29-32
29
7/6/01, 1:44 PM
SMART SOUND CONTROL
Whether you are watching a movie or video game, your TV has automatic sound control
settings matched to your current program source or content. The Smart Sound feature quickly
resets your TV’s sound controls of program for a number of different types of programs and
viewing conditions you may have in your home. Each Smart Sound setting is preset at the
factory to automatically adjust the TV’s Treble and Bass levels.
Step
Press button
q
Press botton repeatedly to cycle through the 4 settings namely,
Theatre, Music, Voice and Personal and select your desired
sound setting.
m
Exit menu from screen.
Definition of Sound Settings
Theatre : Emphasize sensation to action.
(Bass and Treble boosted)
Theatre
Music
: Emphasize low tone (Bass boosted).
Music
Voice
: Emphasize high tone (treble boosted).
Voice
Personal : Sound settings are set to your preference.
Personal
30
15PT2302/p29-32
30
7/6/01, 1:44 PM
PERSONAL ZAPPING
A list or series of favourite TV programs can be selected and stored in the 4 coloured buttons
with the Personal Zapping feature. With this feature you can easily viewed up to a total of 10
preferred channels for each coloured button.
Adding Channels to the Favourite list
Step
Press button
1
4
7
2
5
8
0
3
6
9
Result on TV Screen
Select a channel by the Digit
buttons
8
Press button to display list.
8
Select List!
Choose your favourite colour
button to store selected channel.
Repeat steps 1 to 3 to add and
store your avourite channels to
the list.
m
Added!
8
Exit menu from screen.
To view through the favourite list
Press the colour button that you have selected.
Press button repeatedly to cycle through your favourite list
and view your favourite channel.
Deleting Channels from the Favourite list
Select a colour button and press
button repeatedly to select the
channel you want to delete.
Press button to display list.
8
8
Remove Item?- Press
Press button to remove item.
Repeat steps 1 to 3 to delete
more channels from list.
m
Exit menu from screen.
31
15PT2302/p29-32
31
7/6/01, 1:44 PM
AUTOMATIC PICTURE BOOSTER
If the transmission signal is weak, the Automatic Picture Booster built into the TV set will
increase the signal level to provide a good picture at all times.You have a choice to turn on/off
the feature, depending on the signal conditions locally.
Step
Press button
MENU
Result on TV Screen
Display the main menu on screen.
Main
✔ Picture
■ Sound
■ Features
■ Install
¸
Select Features.
Main
■ Picture
■ Sound
✔ Features
■
Install
˙
¸
o
π Brightness
Colour
Contrast
Sharpness
Colour Temp.
More...
œ
Timer
Child Lock
π Format
Auto Pic. Booster
œ
Enter the Features menu.
Select Auto Pic. Booster.
o
Features
o
■ Timer
■ Child Lock
■ Format
✔ Auto Pic. Boosterπ
Off
œ
˙
Select On.
Features
o
■ Timer
■ Child Lock
■ Format
✔ Auto Pic. Boosterπ
œ
m
Exit menu from screen.
32
15PT2302/p29-32
32
7/6/01, 1:44 PM
On
USING THE TELETEXT
If a TV channel broadcast contains teletext information, each channel that broadcasts
teletext transmits a page (index page) with information on how to use the teletext system,
usually on page 100. The system transmitted is indicated in the option line at the bottom
of the screen.
Result on TV Screen
Press button
‘
& On/Off teletext
and
Superimpose
teletext page
over TV
(
programme
b
“
é Selecting a
teletext page
&
1
4
é
7
2
5
8
0
3
6
9
“ Accessing
a teletext
page
˚
Press the button once to switch on
teletext display. (A channel in which
teletext is being transmitted must be
selected).
Press the button the second time
superimpose the teletext page over
the TV programme.
Press the button the third time
to exit teletext mode.
Key in the required teletext page
(3 digits). The page number is
displayed at the top left hand corner
of the screen. When the teletext
page is located, the counter stops
searching. If the counter keeps
searching, it means that the page is
not available for selection. If you
make a mistake in keying the page
number, you have to complete
keying the 3-digit number before
re-keying the correct page number.
Press the CURSOR UP button to
display the next page and the
CURSOR DOWN button to
display the previous page.
¸
‘ Direct Access to
an item or
corresponding
pages
The 4-colour buttons allow you to
access directly an item or
corresponding pages.
( Main Index
Press the button to return to the
main index page.
d
33
15PT2302/p33-35
33
7/6/01, 1:47 PM
USING THE TELETEXT
Press button
§ Interrupt
§
è
!
ç
a
è Enlarge
h
! Hold
f
ç Reveal/
Conceal
e
Result on TV Screen
Press the button to change to TV
mode. Press the button again to
return to teletext mode and to the
teletext page.
Press the button once to enlarge
and view the top half of the page.
Press the button the second time
to enlarge and view the bottom
half of the page. Press the button
the third time to return to normal
size page.
A selected page sometimes
contains a few sub-pages. The subpage will automatically move to the
next sub-page after about 20
seconds. The total number of subpages are indicated at the top right
hand corner of the screen. Press
the button once to hold page and
the second time to release holding
of page.
Press the button once to reveal
hidden information (solutions to
puzzles, riddles, etc). Press the
button the second time to conceal
information.
This button is applicable only to
teletext page with puzzles, riddles,
etc.)
34
15PT2302/p33-35
34
7/6/01, 1:47 PM
SPECIFICATIONS
15PT2302
Picture tube screen size
370 mm
Picture tube visible area
355 mm
Audio Output :
Speaker
2x3 W
TV System
NTSC M
PAL B/G
PAL D/K
PAL I
SECAM B/G
SECAM D/K
SECAM K1
Set Dimensions :
Width
Depth
Height
403 mm
444 mm
357 mm
Net Weight of Set
approximate 13 kg
Note
For Operating Voltage, Frequency, Power Consumption and Version Number, refer to the
type number at the rear of the set.
35
15PT2302/p33-35
35
7/6/01, 2:02 PM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement